Esthetic perception of facial profile changes in Class II patients treated with Herbst or Forsus appliances.

OBJECTIVE: To evaluate the esthetic perceptions of orthodontists and laypersons for facial profile changes after orthodontic treatment using Herbst or Forsus appliances. MATERIALS AND METHODS: Pre- and posttreatment facial profile contour images of 20 Class II patients treated with Herbst (group H; n = 10) and Forsus (group F; n = 10) appliances were analyzed by 30 orthodontists and 30 laypersons, who graded them from 1 (unattractive) to 10 (very attractive) using a visual analog scale. Two assessments were carried out with a 15 day-interval. In the first evaluation, 40 images were presented in a random sequence. In the second evaluation, initial and final facial profile images of each patient were randomly presented side by side. To compare groups in relation to treatment method, Mann-Whitney tests were used. To evaluate differences between time points, Wilcoxon tests were used. RESULTS: In the first evaluation, there was a significant difference between initial and final images only for group H, for both laypersons (P = .017) and orthodontists (P = .037). There was also a significant difference between laypersons and orthodontists in their ratings of posttreatment Herbst appliance profiles (P = .028). There was no significant difference between initial and final facial profile images for group F and no significant differences between or within evaluator groups in their ratings of initial or final Forsus appliance profiles. In the second evaluation, there was a significant difference between appliance groups only for laypersons, who considered cases treated with the Herbst appliance more attractive than those treated with the Forsus (P = .031). Laypersons also considered Herbst profiles more attractive than did orthodontists (P = .047). CONCLUSIONS: Class II malocclusion treatment using the Herbst appliance may produce a more esthetically improved facial profile silhouette compared with Forsus appliances. The magnitude of perceived changes may not be considered clinically relevant.

Shear bond strength of brackets bonded with nanofilled flowable resins

Introduction and Objective : To evaluate the shear bond strength of brackets fixed with different materials (two light-cured nanofilled low-viscosity resins - Transbond Supreme LV and Flow Tain LV and two light-cured traditional resins - Transbond XT and Transbond Plus Color Change) after 10 min and 24 h, and to evaluate the type of failure. Material and methods : Eighty bovine incisors were selected and randomly divided into groups (n = 10) according to the material and fixation period. The brackets were bonded following the manufacturer's instructions and stored in deionized water at 37oC for 10 min or 24 h. After, the specimens were submitted to shear bond strength test at 0.5 mm/min and evaluated for adhesive remnant index (ARI). The data were submitted to Kruskal Wallis and Wilcoxon tests (p < 0.05) and the ARI scores to Chi-Square test. Results: There was a significant difference among the materials (p < 0.05) (after 10 min - Transbond XT > Transbond Plus Color Change > Transbond Supreme LV = Flow Tain LV and after 24 h - Transbond XT > Transbond Plus Color Change = Transbond Supreme LV = Flow Tain LV). There was no significant difference in resistance values between 10 min and 24 h, except for Transbond Plus Color Change. Most groups showed adhesive remaining adhered to the enamel (scores 2 and 3) without statistical significant difference (p > 0.05). Conclusion: The light-cured traditional resins showed higher resistance than the nanofilled materials. The period of fixation had no influence on the resistance for different materials, except for Transbond Plus Color Change.

Effect of different surface treatments for ceramic bracket base on bond strength of rebonded brackets.

The aim of this study was to evaluate the shear bond strength of rebonded ceramic brackets after subjecting the bracket base to different treatments. Seventy-five premolars were selected and randomly distributed into five groups (n=15), according to the type of the bracket surface treatment: I, no treatment, first bonding (control); II, sandblasting with aluminum oxide; III, sandblasting + silane; IV, silica coating + silane; and V, silicatization performed in a laboratory (Rocatec system). The brackets were fixed on an enamel surface with Transbond XT resin without acid etching. The brackets were then removed and their bases were subjected to different treatments. Thereafter, the brackets were fixed again to the enamel surface and the specimens were subjected to shear bond strength (SBS) test. The adhesive remnant index (ARI) was then evaluated for each specimen. Data were subjected to ANOVA and Tukey's tests (α=0.05). A statistically significant difference was observed only between Rocatec and the other groups; the Rocatec group showed the lowest SBS values. The highest SBS values were observed for group 1, without any significant difference from the values for groups II, III and IV. Most groups had a higher percentage of failures at the enamel-resin interface (score 1). It was concluded that the surface treatments of rebonded ceramic brackets were effective, with SBS values similar to that of the control group, except Rocatec group.

Effect of Different Surface Treatments for Ceramic Bracket Base on Bond Strength of Rebonded Brackets

The aim of this study was to evaluate the shear bond strength of rebonded ceramic brackets after subjecting the bracket base to different treatments. Seventy-five premolars were selected and randomly distributed into five groups (n=15), according to the type of the bracket surface treatment: I, no treatment, first bonding (control); II, sandblasting with aluminum oxide; III, sandblasting + silane; IV, silica coating + silane; and V, silicatization performed in a laboratory (Rocatec system). The brackets were fixed on an enamel surface with Transbond XT resin without acid etching. The brackets were then removed and their bases were subjected to different treatments. Thereafter, the brackets were fixed again to the enamel surface and the specimens were subjected to shear bond strength (SBS) test. The adhesive remnant index (ARI) was then evaluated for each specimen. Data were subjected to ANOVA and Tukey's tests (α=0.05). A statistically significant difference was observed only between Rocatec and the other groups; the Rocatec group showed the lowest SBS values. The highest SBS values were observed for group 1, without any significant difference from the values for groups II, III and IV. Most groups had a higher percentage of failures at the enamel-resin interface (score 1). It was concluded that the surface treatments of rebonded ceramic brackets were effective, with SBS values similar to that of the control group, except Rocatec group.

O objetivo do estudo foi avaliar o efeito de tratamentos da base de bráquetes cerâmicos monocristalinos na resistência de união ao esmalte após recolagem. Setenta e cinco pré-molares foram selecionados e aleatoriamente distribuídos em 5 grupos (n=15) de acordo com o tratamento da base do bráquete: I - sem tratamento, primeira colagem (controle), II - jateamento com óxido de alumínio, III - jateamento seguido da aplicação de silano, IV - jateamento com partículas de dióxido de sílica (silicatização) seguido de silano, V - silicatização realizada em laboratório (Sistema Rocatec). Os bráquetes foram colados no esmalte com Transbond XT sem condicionamento ácido. Em seguida, os bráquetes foram removidos e suas bases foram submetidas aos diferentes tratamentos. Os bráquetes foram recolados, armazenados por 24 h e submetidos ao ensaio mecânico de cisalhamento com velocidade de 0,5 mm/min. Após, o índice de remanescente adesivo (IRA) foi avaliado em cada espécime. Os dados foram submetidos à análise de variância e teste de Tukey (α=0,05). Pode-se observar que houve diferença significativa apenas entre o sistema Rocatec e os demais grupos, o qual apresentou os menores valores de resistência. Os maiores valores de resistência foram observados para o grupo I (controle), sem diferença significativa dos grupos II, III e IV. A maioria dos grupos apresentou maior porcentagem de falhas na interface esmalte/resina (escore 1). Pode-se concluir que os tratamentos da base do bráquete cerâmico foram efetivos, apresentando valores similares ao grupo controle, exceto para o grupo em que foi usado Rocatec.

Retrospective study of clinical complications during orthodontic treatment with either a removable mandibular acrylic splint Herbst or with a cantilever Herbst.

OBJECTIVE: To compare the clinical complications during treatment with either a removable mandibular acrylic splint (RMS) or with a cantilever (HC) Herbst appliance. METHODS: Records from 159 Class II, division 1, consecutively treated patients with a Herbst appliance were examined. The sample was composed of 82 male and 77 female patients with a mean age of 11.8 years. The Herbst appliance was used for a mean of 12 months (standard deviation 2.15 months). Two main Herbst groups were analyzed: group RMS (n  =  125) and group HC (n  =  34). They were further subdivided according to the telescopic system used (Dentaurum type 1 or PMA) and fixation mode (splint with crowns or Grip Tite bands). Patients' clinical records were assessed to identify clinical complications. RESULTS: The incidence of complications during treatment was 85.3% for the HC group and 88.0% for the RMS group, with no statistically significant difference (Mann-Whitney test, P > .05). The fixation mode (crown or band) also did not show a statistically significant difference (P > .05). Regarding the telescopic system used, the Dentaurum group had 2.9 times more susceptibility to complications than the PMA group, regardless of the Herbst type. CONCLUSIONS: On average, approximately 2.5 complications per patient were reported. Most patients had a maximum of three complications during Herbst treatment. Herbst appliance type (RMS or HC) and fixation mode (crowns or Grip Tite bands) did not influence the number of complications. The PMA (without screws) telescopic system seemed to be more reliable (regarding the number of complications) than Dentaurum type 1, regardless of the appliance design (RMS or HC).

Effects of active and passive lacebacks on antero-posterior position of maxillary first molars and central incisors.

The purpose of this study was to compare the effects of active and passive lacebacks on antero-posterior position of maxillary first molars and central incisors during leveling phase. Twenty-three subjects with Class I and Class II malocclusion were treated with first premolars extraction using preadjusted appliances (MBT 0.022-inch brackets). The leveling phase was performed with stainless steel archwires only. The sample was divided into 2 groups: 14 subjects received active lacebacks (Group 1) and 9 subjects received passive lacebacks (Group 2). Lacebacks were made from 0.008-inch ligature wire. Lateral cephalometric radiographs were taken pre- and post-leveling phase. Student's t-test was applied to determine the differences between pre- and post-leveling mean values and to determine the mean differences between groups. In Group I, the first molars showed a significant mesial movement, whereas no change was observed in Group 2. In both groups, maxillary central incisor crowns moved to lingual side. In conclusion, active laceback produced anchorage loss of maxillary first molars whereas passive laceback did not affect the position of these teeth. Active and passive lacebacks were effective in preventing central incisor proclination.

Shear bond strength of nanofilled flowable resins used for indirect bracket bonding

Aim: To evaluate the bond strength of brackets fixed with different materials (two light-cured nanofilled resins - Transbond Supreme LV and Flow Tain LV, a light-cured resin - Transbond XT(control) and two chemically cured resins for indirect bonding - Sondhi Rapid- Set and Custom I.Q.) using the indirect bonding technique after 10 min and 24 h, and evaluate the type of failure. Methods: One hundred premolars were selected and randomly divided into groups (n=10) according to the material and fixation period. The brackets were bonded through the indirect technique following the manufacturer’s instructions and stored in deionized water at 37oC for 10 min or 24 h. After, the specimens were submitted to a shear bond strength (SBS) test (Instron) at 0.5 mm/min and evaluated for adhesive remnant index (ARI). The data were submitted to ANOVA and Tukey’s test (p<0.05) and the ARI scores were submitted to the chi-square test. Results: It could be observed a significant difference among the materials (Flow Tain LV = TransbondSupreme LV = Transbond XT> Sondhi Rapid-Set > Custom I.Q.). There was no significant difference in resistance values between 10 min and 24 h, regardless of the materials. Most groups showed adhesive remaining adhered to the enamel (scores 2 and 3) without statistically significant difference (p>0.05). Conclusions: It was concluded that the light-cured nanofilled materials used in indirect bonding showed greater resistance than the chemically cured materials. The period of fixation had no influence on the resistance for different materials.

Effects of active and passive lacebacks on antero-posterior position of maxillary first molars and central incisors

The purpose of this study was to compare the effects of active and passive lacebacks on antero-posterior position of maxillary first molars and central incisors during leveling phase. Twenty-three subjects with Class I and Class II malocclusion were treated with first premolars extraction using preadjusted appliances (MBT 0.022-inch brackets). The leveling phase was performed with stainless steel archwires only. The sample was divided into 2 groups: 14 subjects received active lacebacks (Group 1) and 9 subjects received passive lacebacks (Group 2). Lacebacks were made from 0.008-inch ligature wire. Lateral cephalometric radiographs were taken pre- and post-leveling phase. Student's t-test was applied to determine the differences between pre- and post-leveling mean values and to determine the mean differences between groups. In Group I, the first molars showed a significant mesial movement, whereas no change was observed in Group 2. In both groups, maxillary central incisor crowns moved to lingual side. In conclusion, active laceback produced anchorage loss of maxillary first molars whereas passive laceback did not affect the position of these teeth. Active and passive lacebacks were effective in preventing central incisor proclination.

O objetivo deste estudo foi comparar os efeitos dos lacebacks ativos e passivos na posição ântero-posterior dos primeiros molares e dos incisivos centrais superiores durante a fase de nivelamento. Vinte e três indivíduos com má oclusão de Classes I e II foram tratados com extrações dos primeiros pré-molares utilizando aparelhos fixos pré-ajustados (bráquetes MBT 0,022"). A fase de nivelamento foi realizada somente com arcos de aço inoxidável. A amostra foi dividida em 2 grupos: 14 pacientes receberam lacebacks ativos (Grupo 1) e 9 pacientes receberam lacebacks passivos (Grupo 2). Os lacebacks foram feitos com fio de ligadura de 0,008" (0,20 mm). Telerradiografias laterais foram realizadas antes e após a fase de nivelamento. O teste t de Student foi aplicado para determinar as diferenças entre as médias de deslocamento entre os períodos pré e pós-nivelamento e para determinar as diferenças entre os grupos. No Grupo 1, o primeiro molar mostrou uma movimentação mesial significativa enquanto nenhuma alteração foi observada no Grupo 2. Em ambos os grupos, os incisivos centrais superiores foram lingualizados. Em conclusão, os lacebacks ativos produziram perda de ancoragem nos primeiros molares superiores enquanto que os lacebacks passivos não afetaram a posição destes dentes. Lacebacks ativos e passivos foram efetivos para prevenir a vestibularização dos incisivos centrais superiores.

An endodontic sealer induces a pathological condition when associated with persistent tissue toxicity and presence of myofibroblasts.

The aims of this study were to evaluate the ratio between inflammatory reactions induced by four endodontic sealers and the occurrence of fibrosis and the number of myofibroblasts with positivity to α-smooth-actin muscle (α-SMA). Polyethylene tubes were filled with a root canal sealer (Endofill, AH Plus, Acroseal and Epiphany) and inserted into 4 site at the dorsal region of 24 Wistar rats; 2 empty tubes (control) were grafted in 6 rats. After 7, 21, and 45 days, 8 animals were euthanized, providing 6 specimens per test group and 2 specimens from the control group. The fragments were subjected to histological processing and immunohistochemical analysis for anti α-SMA protein. All specimens, except those from the control group, presented severe inflammatory reaction on the 7th postoperative day, which also coincided with a large number of myofibroblasts. On the 21st and 45th days post-surgery, the inflammatory reaction induced by Endofill, AH Plus and Acroseal decreased significantly, which coincided with reduced presence of myofibroblasts and usual collagen deposition. In contrast, in the group filled with Epiphany, significant inflammatory cell infiltrate was present in all analyzed periods. The persistence of an inflammatory reaction induced by endodontic sealer may also induce the development of fibrosis in combination with presence of myofibroblasts.

Estudo da anatomia interna dos pré-molares: revisão de literatura / The root and root canal morphology of the human premolar: a literature review

Com a intenção de reforçar a estreita relação existente entre o conhecimento da anatomia interna e a obtenção do sucesso no tratamento endodôntico, são relatadas aqui características da anatomia interna presentes no grupo dental dos pré-molares.Revisão de literatura: as alterações morfológicas quando desconsideradas podem dificultar a terapia endodôntica. A resolução de casos com anatomia incomum exige consequentemente, mudanças no método de diagnóstico, assim como no tratamento.Conclusão: a identificação, e, portanto, o tratamento satisfatório de raízes e canais diferenciados, diminui a persistência dos sinais e sintomas, reduzindo, assim as possíveis causas de um retratamento...

Intended to illustrate and reinforce the close link between knowledge of internal anatomy and the achievement of success in endodontic treatment, are reported here characteristic of the internal anatomy in the dental group of premolars.Literature review: the morphological changes when discarded can complicate the endodontic therapy. The resolution of cases with unusual anatomy requires, therefore, changes in the method of diagnosis, and treatment.Conclusion: the identification and, therefore, the satisfactory treatment of roots and different canals, reduces the persistence of signs and symptoms, reducing thus, the possible causes of a retreatment...

An endodontic sealer induces a pathological condition when associated with persistent tissue toxicity and presence of myofibroblasts

The aims of this study were to evaluate the ratio between inflammatory reactions induced by four endodontic sealers and the occurrence of fibrosis and the number of myofibroblasts with positivity to α-smooth-actin muscle (α-SMA). Polyethylene tubes were filled with a root canal sealer (Endofill, AH Plus, Acroseal and Epiphany) and inserted into 4 site at the dorsal region of 24 Wistar rats; 2 empty tubes (control) were grafted in 6 rats. After 7, 21, and 45 days, 8 animals were euthanized, providing 6 specimens per test group and 2 specimens from the control group. The fragments were subjected to histological processing and immunohistochemical analysis for anti α-SMA protein. All specimens, except those from the control group, presented severe inflammatory reaction on the 7th postoperative day, which also coincided with a large number of myofibroblasts. On the 21st and 45th days post-surgery, the inflammatory reaction induced by Endofill, AH Plus and Acroseal decreased significantly, which coincided with reduced presence of myofibroblasts and usual collagen deposition. In contrast, in the group filled with Epiphany, significant inflammatory cell infiltrate was present in all analyzed periods. The persistence of an inflammatory reaction induced by endodontic sealer may also induce the development of fibrosis in combination with presence of myofibroblasts.

O objetivo deste estudo foi avaliar a relação entre reação inflamatória induzida por quatro cimentos endodônticos e a presença de fibrose e quantidade de miofibroblastos que apresentam positividade para α-SMA. Tubos de polietileno foram preenchidos com o cimento (I: Endofill; II: AH Plus; III: Acroseal; IV: Epiphany) e inseridos em 4 regiões do dorso de 24 ratos Wistar, enquanto 2 tubos vazios (V - controle) foram inseridos em 6 ratos. Após 7, 21 e 45 dias, oito animais foram sacrificados obtendo 6 indivíduos por grupo e 2 para o grupo controle. Os fragmentos foram submetidos ao processamento histológico e à análise imuno-histoquímica para a proteína anti-α-SMA. Todos os grupos, exceto o controle, demonstraram notável reação inflamatória no 7º dia pós-operatório, que também coincidiu com uma grande quantidade de miofibroblastos. No 21º e 45º dia pós-operatório, a reação inflamatória induzida pelo Endofill, AH Plus e Acroseal diminuiu significativamente, o que coincidiu com reduzida presença de miofibroblastos e deposição de colágeno normal. Em contraste, no grupo Epiphany, infiltrado inflamatório significativo esteve presente em todos os períodos analisados. A persistência do infiltrado inflamatório induzido por cimento endodôntico pode também provocar uma fibrose associada com a presença de miofibroblastos.

Tratamento ortodôntico em pacientes com dentes reimplantados após avulsão traumática: relato de caso / Orthodontic treatment in patients with reimplanted teeth after traumatic avulsion: a case report

INTRODUÇÃO: a alta prevalência de indivíduos com traumatismo dentário prévio ao tratamento ortodôntico justifica os cuidados a serem observados antes e durante o tratamento, considerando todas as implicações do movimento ortodôntico sobre os dentes traumatizados. Entre as lesões traumáticas dentárias, a avulsão com posterior reimplantação do dente é a que apresenta maior risco de complicações - como necrose pulpar, reabsorção radicular e anquilose -, sendo também a que inspira maiores cuidados pelo ortodontista. OBJETIVO: este trabalho busca, através do relato de um caso clínico, analisar as implicações do reimplante dentário após avulsão traumática, em pacientes que requerem tratamento ortodôntico. CONCLUSÕES: a movimentação ortodôntica de um dente reimplantado, após sua avulsão traumática, é possível desde que não ocorra qualquer sinal de anormalidade. Porém, dentes que sofrem anquilose não são passíveis de movimentação ortodôntica, mas devem ser preservados como mantenedores de espaço, até a reabsorção total da raiz, desde que não apresentem infraposição severa. Ocorrendo infraposição severa do dente anquilosado, é indicada a amputação da coroa e o sepultamento da raiz, como meio de favorecer a manutenção do osso alveolar na região, pois ocorrerá reabsorção por substituição da raiz sepultada, como ocorreu no caso clínico apresentado.

INTRODUCTION: The high prevalence of individuals with dental trauma prior to orthodontic treatment justifies the precautions that should be followed before and during treatment, considering all possible effects of orthodontic movement on traumatized teeth. Among the major traumatic dental injuries, avulsion with subsequent tooth reimplantation entails a higher than average risk of complications, such as pulp necrosis, root resorption and ankylosis. Therefore, it gives orthodontists several reasons for concern. OBJECTIVE: This case report sought to analyze the implications of tooth reimplantation after traumatic avulsion in patients requiring orthodontic treatment. CONCLUSIONS: Tooth movement of a reimplanted tooth after traumatic avulsion is viable provided no signs of abnormality are present. Ankylosed teeth, however, are not amenable to orthodontic movement but should be preserved as space maintainers until root resorption is completed, provided that the teeth do not present with severe infraocclusion. Should an ankylosed tooth be in severe infraocclusion, crown amputation and root burial are indicated as a means to preserve the alveolar bone in the region, since resorption will occur by replacement of the buried root, as was the case in this report.

Disfunção da articulação temporomandibular em crianças- revisão de literatura / Temporomandibular dysfunction in children-literature review

Introdução e Objetivo Este trabalho teve como objetivo abordar aspectos relacionados às DTM em crianças como etiologia, diagnóstico e tratamento, ressaltando a importância do diagnóstico correto, uma vez que estes pacientes estão em fase de crescimento e desenvolvimento facial. Revisão de literatura As disfunções temporomandibulares (DTM) apresentam vários problemas clínicos que envolvem os músculos da mastigação, articulação temporomandibular e estruturas adjacentes. Em crianças os sintomas desta síndrome estão presentes, porém com menor intensidade quando comparados aos adultos. Quanto à prevalência há uma grande discordância entre os autores. As DTM em crianças possuem etiologia multifatorial, e os fatores mais citados são: hábitos parafuncionais, traumas, fatores oclusais, sistêmicos e psicológicos. Conclusão: Os sinais e sintomas de DTM em populações pediátricas são geralmente suaves e aumentam com a idade, sendo de grande importância o diagnóstico precoce e a inclusão desse tipo de exame em consultas de rotina.

Introduction and Objective The aim of this study was to review the aspects related to TMD in children like etiology, diagnosis and treatment, emphasizing the importance of the corret diagnosis since the pacients are having a growth and development of their faces. Literature Review The Temporomandibulars Dysfunctions (TMD) include many clinical problems that involve the mastigatory muscles, the temporomandibular joint and the near structures. In children the symptoms of this syndrome are presents although with mild intensity when compared with adults and there are a grate amount of discordance in a prevalence of these dysfunctions. The etiology of the TMD are multifatorial and the most citeds in literature are parafunctional habits, traumas, occlusal, systemic and psychological factors. Conclusions The signs and symptoms of the TMD in pediatric populations are generally mild and increase with age, so the early diagnosis is very important and this kind of exam should be include in a routine examination