Development and optimization of amphiphilic self-assembly into nanostructured liquid crystals for transdermal delivery of an antidiabetic SGLT2 inhibitor.

The anti-hyperglycemic sodium glucose co-transporter 2 inhibitor Canagliflozin (CFZ) represents a recent antihyperglycemic modality, yet it suffers from low oral bioavailability. The current work aims to formulate CFZ-loaded transdermal nanostructured liquid crystal gel matrix (NLCG) to improve its therapeutic efficiency. Pre-formulation study included the construction of pseudoternary phase diagrams to explore the effect of two conventional amphiphiles against amphiphilic tri-block copolymer in the formulation of NLCG. The influence of different co-solvents was also investigated with the use of monooleine as the oil. Physical characterization, morphological examination and skin permeation were performed for the optimized formulations. The formula of choice was further investigated for skin irritation and chemical stability. Pharmacodynamic evaluation of the successful formula was conducted on hyperglycemic as well as normoglycemic mice. In addition, oral glucose tolerance test was conducted. Results revealed the supremacy of Poloxamer for stabilizing and maximizing liquid crystal gel (LCG) area percentage that reached up to 12.6%. CFZ-NLCG2 isotropic formula showed the highest permeation parameters; maximum flux value of 7460 µg/cm2 h and Q24 of 5327 µg/cm2. Pharmacodynamic evaluation revealed the superiority of the antihyperglycemic activity of CFZ-NLCG2 in fasting mice and its equivalence in the oral glucose tolerance test (OGTT) compared to the oral one. The obtained results confirmed the success of CFZ-NLCG2 in the transdermal delivery of CFZ in therapeutically effective concentration compared to the oral route, bypassing first pass effect; in addition, eliminates the possible gastrointestinal side effects related to the inhibition of intestinal sodium glucose co-transporter (SGLT) and maximizes its selectivity to the desired inhibition of renal SGLT.

Diacerein-Loaded Hyaluosomes as a Dual-Function Platform for Osteoarthritis Management via Intra-Articular Injection: In Vitro Characterization and In Vivo Assessment in a Rat Model.

The application of intra-articular injections in osteoarthritis management has gained great attention lately. In this work, novel intra-articular injectable hyaluronic acid gel-core vesicles (hyaluosomes) loaded with diacerein (DCN), a structural modifying osteoarthritis drug, were developed. A full factorial design was employed to study the effect of different formulation parameters on the drug entrapment efficiency, particle size, and zeta potential. Results showed that the prepared optimized DCN- loaded hyaluosomes were able to achieve high entrapment (90.7%) with a small size (310 nm). The morphology of the optimized hyaluosomes was further examined using TEM, and revealed spherical shaped vesicles with hyaluronic acid in the core. Furthermore, the ability of the prepared DCN-loaded hyaluosomes to improve the in vivo inflammatory condition, and deterioration of cartilage in rats (injected with antigen to induce arthritis) following intra-articular injection was assessed, and revealed superior function on preventing cartilage damage, and inflammation. The inflammatory activity assessed by measuring the rat's plasma TNF-α and IL-1b levels, revealed significant elevation in the untreated group as compared to the treated groups. The obtained results show that the prepared DCN-loaded hyaluosomes would represent a step forward in the design of novel intra articular injection for management of osteoarthritis.

Insulin Mucoadhesive Liposomal Gel for Wound Healing: a Formulation with Sustained Release and Extended Stability Using Quality by Design Approach.

The present study deals with the formulation of topical insulin for wound healing with extended stability and sustained release, by applying quality by design concepts. Insulin has been promoted as a promising therapeutic wound healing agent. Topical formulation of insulin faced major problems, as it cannot be delivered safely to the wound with a controlled rate. Formulation of insulin-loaded vesicles in optimized bio-adhesive hydrogels has been explored to ensure a safe delivery of insulin to wounds in a controlled manner. Quality by design (QbD) was applied to study the effect of several critical process parameters on the critical quality attributes. Ishikawa diagram was used to identify the highest risk factors, which were screened by a fractional factorial design and augmented by Box-Behnken design. The optimized formula was incorporated into a mucoadhesive gel, which was further subjected to stability and clinical studies. An optimized formula was obtained with a particle size of 257.751 nm, zeta potential - 20.548 mv, 87.379% entrapment efficiency, and a release rate of 91.521 µg/cm2/h. The results showed that liposomal insulin remained stable for 6 months in aqueous dispersion state at 4°C. Moreover, the release was sustained up to 24 h. The clinical study showed an improvement in the wound healing rate, 16 times, as the control group, with magnificent reduction in the erythema of the ulcer and no signs of hypoglycemia. Insulin-loaded liposomal chitosan gel showed a promising drug delivery system with high stability and sustained release.

Risedronate-Loaded Macroporous Gel Foam Enriched with Nanohydroxyapatite: Preparation, Characterization, and Osteogenic Activity Evaluation Using Saos-2 Cells.

The application of minimally invasive surgical techniques in the field of orthopedic surgery has created a growing need for new injectable synthetic materials that can be used for bone grafting. In this work, novel injectable thermosensitive foam was developed by mixing nHAP powder with a thermosensitive polymer with foaming power (Pluronic F-127) and loaded with a water-soluble bisphosphonate drug (risedronate) to promote osteogenesis. The foam was able to retain the porous structure after injection and set through temperature change of PF-127 solution to form gel inside the body. The effect of different formulation parameters on the gelation time, porosity, foamability, injectability, and in vitro degradation in addition to drug release from the prepared foams were analyzed using a full factorial design. The addition of a co-polymer like methylcellulose or sodium alginate into the foam was also studied. Results showed that the prepared optimized thermosensitive foam was able to gel within 1 min at 37°C, and sustain the release of drug for 72 h. The optimized formulation was further tested for any interactions using DSC and IR, and revealed no interactions between the drug and the used excipients in the prepared foam. Furthermore, the ability of the pre-set foam to support osteoblastic-like Saos-2-cell proliferation and differentiation was assessed, and revealed superior function on promoting cellular proliferation as confirmed by fluorescence microscope compared to the plain drug solution. The activity of the foam treated cells was also assessed by measuring the alkaline phosphatase activity and calcium deposition, and confirmed that the cellular activity was greatly enhanced in foam treated cells compared to those treated with the plain drug solution only. The obtained results show that the prepared risedronate-loaded thermosensitive foam would represent a step forward in the design of new materials for minimally invasive bone regeneration.

Bioactive injectable triple acting thermosensitive hydrogel enriched with nano-hydroxyapatite for bone regeneration: in-vitro characterization, Saos-2 cell line cell viability and osteogenic markers evaluation.

Hydrogels forming in-situ have gained great attention in the area of bone tissue engineering recently, they were also showed to be a good and less invasive alternative to surgically applied ones. The primal focus of this study was to prepare chitosan-glycerol phosphate thermosensitive hydrogel formed in-situ and loaded with risedronate (bone resorption inhibitor) in an easy way with no requirement of complicated processes or large number of equipment. Then we investigated its effectiveness for bone regeneration. In-situ forming hydrogels were prepared using chitosan cross-linked with glycerol phosphate and loaded with risedronate and nano-hydroxyapatite as bone cement. The prepared hydrogels were characterized by analyzing their gelation time at 37 °C, % porosity, swelling index, in-vitro degradation, rheological properties, and in-vitro drug release. Results showed that the in-situ hydrogels prepared using 2.5% (w/v) chitosan cross-linked with 50% (w/v) glycerol phosphate in the ratio (9:1, v/v) reinforced with 20 mg/mL and nano-hydroxyapatite possessed the most sustained drug release profile. This optimized formulation was further evaluated using DSC and FTIR studies, in addition to their morphological properties using scanning electron microscopy. The effect on Saos-2 cell line viability was evaluated also using MTT assay on the optimized hydrogel formulation in addition to their action on cell proliferation using fluorescence microscope. Moreover, calcium deposition on the hydrogel and alkaline phosphatase activity were evaluated. Risedronate-nano-hydroxyapatite loaded hydrogels significantly enhanced the Saos-2 cell proliferation in addition to enhanced alkaline phosphatase activity and calcium deposition. Such results suggest that risedronate-nano-hydroxyapatite loaded hydrogels present great biocompatibility for bone regeneration. Proliferation of cells, as well as deposition of mineral on the hydrogel, was an evidence of the biocompatible nature of the hydrogel. This hydrogel formed in-situ present a good less invasive alternative for bone tissue engineering.

Enhancement of the bioavailability of an antihypertensive drug by transdermal protransfersomal system: formulation and in vivo study.

Timolol Maleate (TiM), a nonselective ß-adrenergic blocker, is a potent highly effective agent for management of hypertension. The drug suffers from poor oral bioavailability (50%) due to its first pass effect and a short elimination half-life of 4 h; resulting in its frequent administration. Transdermal formulation may circumvent these problems in the form of protransfersomes. The aim of this study is to develop and optimize transdermal protransfersomal system of Timolol Maleate by film deposition on carrier method where protransfersomes were converted to transfersomes upon skin hydration following transdermal application under occlusive conditions. Two 23 full factorial designs were employed to investigate the influence of three formulation variables which were; phosphatidyl choline: surfactant molar ratio, carrier: mixture and the type of SAA each on particle size, drug entrapment efficiency and release rate. The optimized formulation was evaluated regarding permeation through hairless rat skin and compared with oral administration of aqueous solution on male Wistar rats. Optimized protransfersomal system had excellent permeation rate through shaved rat skin (780.69 µg/cm2/h) and showed six times increase in relative bioavailability with prolonged plasma profile up to 72 h. A potential protransfresomal transdermal system was successfully developed and factorial design was found to be a smart tool in its optimization.

Engineering of a novel optimized platform for sublingual delivery with novel characterization tools: in vitro evaluation and in vivo pharmacokinetics study in human.

The aim of this work was to develop a novel and more efficient platform for sublingual drug delivery using mosapride citrate (MSP) as a model drug. The engineering of this delivery system had two stages, the first stage was tuning of MSP physicochemical properties by complexation with pure phosphatidylcholine or phosphatidylinositol enriched soybean lecithin to form MSP-phospholipid complex (MSP-PLCP). Changes in physicochemical properties were assessed and the optimum MSP-PLCP formula was then used for formulation into a flushing resistant platform using two mucoadhesive polymers; sodium alginates and sodium carboxymethylcellulose at different concentrations. Design of experiment approach was used to characterize and optimize the formulated flushing resistant platform. The optimized formulation was then used in a comparative pharmacokinetics study with the market formulation in human volunteers. Results showed a marked change in MSP physicochemical properties of MSP-PLCP compared to MSP. Addition of mucoadhesive polymers to flushing resistant platform at an optimum concentration balanced between desired mucoadhesive properties and a reasonable drug release rate. The optimized formulation showed significantly a superior bioavailability in humans when compared to the market sublingual product. Finally, the novel developed sublingual flushing resistant platform offers a very promising and efficient tool to extend the use of sublingual route and widen its applications.

Nanoemulsion-based electrolyte triggered in situ gel for ocular delivery of acetazolamide.

In the present work the antiglaucoma drug, acetazolamide, was formulated as an ion induced nanoemulsion-based in situ gel for ocular delivery aiming a sustained drug release and an improved therapeutic efficacy. Different acetazolamide loaded nanoemulsion formulations were prepared using peanut oil, tween 80 and/or cremophor EL as surfactant in addition to transcutol P or propylene glycol as cosurfactant. Based on physicochemical characterization, the nanoemulsion formulation containing mixed surfactants and transcutol P was selected to be incorporated into ion induced in situ gelling systems composed of gellan gum alone and in combination with xanthan gum, HPMC or carbopol. The nanoemulsion based in situ gels showed a significantly sustained drug release in comparison to the nanoemulsion. Gellan/xanthan and gellan/HPMC possessed good stability at all studied temperatures, but gellan/carbopol showed partial drug precipitation upon storage and was therefore excluded from the study. Gellan/xanthan and gellan/HPMC showed higher therapeutic efficacy and more prolonged intraocular pressure lowering effect relative to that of commercial eye drops and oral tablet. Gellan/xanthan showed superiority over gellan/HPMC in all studied parameters and is thus considered as a promising mucoadhesive nanoemulsion-based ion induced in situ gelling formula for topical administration of acetazolamide.

Nanodispersion-loaded mucoadhesive polymeric inserts for prolonged treatment of post-operative ocular inflammation.

Mucoadhesive polymeric films incorporated with ketorolac tromethamine-loaded nanodispersion aiming the sustained delivery of the drug to the cornea have been developed and characterised for the treatment of post-operative ocular inflammation. Nanodispersions were prepared by ionic gelation method with various concentrations of chitosan and sodium tripolyphosphate. The developed nanodispersions were analysed for morphology, particle size, dispersion homogeneity, zeta potential, entrapment efficiency and drug release. The nanodispersion that showed the smallest particle size and the highest entrapment efficiency was incorporated in optimised HPMC E15 and Eudragit RL100/HPMC K4m films. The formulation with optimum physicomechanical properties was selected to study its ex vivo transcorneal permeation through freshly excised bovine cornea in comparison with the nanodispersion and the marketed eye drops (Acular®). The polymeric ocular film showed greater permeation than aqueous eye drops. Moreover, the ocular film revealed a prolonged anti-inflammatory effect compared to eye drops when applied to inflamed rabbit's eyes.

Improved bioavailability of timolol maleate via transdermal transfersomal gel: Statistical optimization, characterization, and pharmacokinetic assessment.

Timolol maleate (TiM), a nonselective ß-adrenergic blocker, is a potent highly effective agent for management of hypertension. The drug suffers from extensive first pass effect, resulting in a reduction of oral bioavailability (F%) to 50% and a short elimination half-life of 4 h; parameters necessitating its frequent administration. The current study was therefore, designed to formulate and optimize the transfersomal TiM gel for transdermal delivery. TiM loaded transfersomal gel was optimized using two 2(3) full factorial designs; where the effects of egg phosphatidyl choline (PC): surfactant (SAA) molar ratio, solvent volumetric ratio, and the drug amount were evaluated. The formulation variables; including particle size, drug entrapment efficiency (%EE), and release rate were characterized. The optimized transfersomal gel was prepared with 4.65:1 PC:SAA molar ratio, 3:1 solvent volumetric ratio, and 13 mg drug amount with particle size of 2.722 µm, %EE of 39.96%, and a release rate of 134.49 µg/cm(2)/h. The permeation rate of the optimized formulation through the rat skin was excellent (151.53 µg/cm(2)/h) and showed four times increase in relative bioavailability with prolonged plasma profile up to 72 h compared with oral aqueous solution. In conclusion, a potential transfersomal transdermal system was successfully developed and the factorial design was found to be a smart tool, when optimized.

Ketoroloac tromethamine loaded nanodispersion incorporated into thermosensitive in situ gel for prolonged ocular delivery.

The present study was designed to improve the ocular availability of ketorolac tromethamine and to prolong its precorneal residence time for the treatment of postoperative ocular inflammation. Ketorolac tromethamine nanodispersions were successfully prepared by nanoprecipitation method using Eudragit(®) RL100. These nanodispersions were characterized in terms of particle size, zeta potential, entrapment efficiency and in vitro release. Consequently, the optimum nanodispersion was incorporated into thermosensitive in situ gel. The optimum gelling capacity was obtained by 20% Pluronic(®) F-127 and 14% Pluronic(®) F-127/1.5% HPMC K4m. The gelling temperature and gelation time of the in situ gels increased by decreasing the concentration of Pluronic(®) F-127. The mucoadhesive strength was significantly improved by the addition of HPMC. Incorporation of ketorolac tromethamine loaded nanodispersions into in situ gel bases sustained the release of ketorolac tromethamine, improved its ocular availability and prolonged its residence time without causing irritation to eye.

Silver sulfadiazine based cubosome hydrogels for topical treatment of burns: development and in vitro/in vivo characterization.

The present study is concerned with the development and characterization of a novel nanaoparticulate system; cubosomes, loaded with silver sulfadiazine (SSD), which is the metallic salt of a sulfonamide derivative, and is considered as the drug of choice for topical treatment of infected burns. Cubosome dispersions were formulated by an emulsification technique using different concentrations of a lipid phase monoolein and the nonionic surfactant, Poloxamer 407, with or without polyvinyl alcohol. The prepared cubosomal dispersions were characterized regarding physical morphology, dimensional distribution, particle size, and in vitro drug release. The optimum formulae were incorporated in a chitosan, carbopol 940 or chitosan/carbopol mixture based hydrogels, to form cubosomal hydrogels (cubogels). The cubogels were characterized regarding in vitro release of SSD, rheological properties, pH, and mucoadhesion. For the optimal cubogel formulae, an in vivo histopathological study was conducted on rats to predict the effectiveness of the newly prepared cubogels in comparison with the commercially available cream (Dermazin®). In vivo histopathological study results showed that prepared cubogels were successful in the treatment of deep second degree burn which may result in better patient compliance and excellent healing results with least side effects in comparison with the commercially available product.

Brain targeted solid lipid nanoparticles for brain ischemia: preparation and in vitro characterization.

This study aims at formulating solid lipid nanoparticles (SLNs) of Vinpocetine (VIN) to be used as a brain targeted sustained drug-delivery system. VIN is a derivative of vincamine alkaloid, used for chronic cerebral vascular ischemia. However, it suffers from low bioavailability and short half-life. Its oral bioavailability is recorded to be between 7 and 55%. Its elimination half-life is 1-2 h so it would be a good candidate for a sustained drug-delivery system. VIN SLNs were prepared using modified high shear homogenization followed by ultrasonication technique. The effect of incorporating different lipids at different concentrations of various surfactants was investigated. The VIN SLNs were characterized by entrapment efficiency percent (EE%), particle size distribution, zeta-potential, and cumulative released percent after 96 h. The EE% ranged between 83.34% ± 0.95-94.56% ± 0.11 due to the lipophilic character of VIN. The mean particle size measured ranged from 123 nm-464 nm. The cumulative released percent after 96 h ranged from 23.55% to 75.67% showing a controlled release profile. Formula (F32) composed of 5% glyceryl monostearate (GMS) and stabilized by 2% surfactant mixture [Tween 80, Pluronic F 68 (1:1)] was the most appropriate formula for brain delivery having EE% of 89.09% ± 1.49, zero-order release kinetics with cumulative released percent of 72.12% after 96 h, zeta-potential of -11.3 ± 0.97 mV. It showed a unimodal size distribution with particle size ≈ 90 nm and polydispersity index of 0.121. The formula of choice in this study exhibited a zero-order sustained release profile and met the requirement for a brain targeted SLN so it could be a promising formula to deliver VIN to the brain.