Tuning the double lipidation of salmon calcitonin to introduce a pore-like membrane translocation mechanism.

A widespread strategy to increase the transport of therapeutic peptides across cellular membranes has been to attach lipid moieties to the peptide backbone (lipidation) to enhance their intrinsic membrane interaction. Efforts in vitro and in vivo investigating the correlation between lipidation characteristics and peptide membrane translocation efficiency have traditionally relied on end-point read-out assays and trial-and-error-based optimization strategies. Consequently, the molecular details of how therapeutic peptide lipidation affects it's membrane permeation and translocation mechanisms remain unresolved. Here we employed salmon calcitonin as a model therapeutic peptide and synthesized nine double lipidated analogs with varying lipid chain lengths. We used single giant unilamellar vesicle (GUV) calcein influx time-lapse fluorescence microscopy to determine how tuning the lipidation length can lead to an All-or-None GUV filling mechanism, indicative of a peptide mediated pore formation. Finally, we used a GUVs-containing-inner-GUVs assay to demonstrate that only peptide analogs capable of inducing pore formation show efficient membrane translocation. Our data provided the first mechanistic details on how therapeutic peptide lipidation affects their membrane perturbation mechanism and demonstrated that fine-tuning lipidation parameters could induce an intrinsic pore-forming capability. These insights and the microscopy based workflow introduced for investigating structure-function relations could be pivotal for optimizing future peptide design strategies.

Quantitative live-cell imaging of lipidated peptide transport through an epithelial cell layer.

Oral drug delivery increases patient compliance and is thus the preferred administration route for most drugs. However, for biologics the intestinal barrier greatly limits the absorption and reduces their bioavailability. One strategy employed to improve on this is chemical modification of the biologic through the addition of lipid side chains. While it has been established that lipidation of peptides can increase transport, a mechanistic understanding of this effect remains largely unexplored. To pursue this mechanistic understanding, end-point detection of biopharmaceuticals transported through a monolayer of fully polarized epithelial cells is typically used. However, these methods are time-consuming and tedious. Furthermore, most established methods cannot be combined easily with high-resolution live-cell fluorescence imaging that could provide a mechanistic insight into cellular uptake and transport. Here we address this challenge by developing an axial PSF deconvolution scheme to quantify the transport of peptides through a monolayer of Caco-2 cells using single-cell analysis with live-cell confocal fluorescence microscopy. We then measure the known cross-barrier transport of several compounds in our model and compare the results with results obtained in an established microfluidic model finding similar transport phenotypes. This verifies that already after two days the Caco-2 cells in our model form a tight monolayer and constitute a functional barrier model. We then apply this assay to investigate the effects of side chain lipidation of the model peptide drug salmon calcitonin (sCT) modified with 4­carbon and 8­carbon-long fatty acid chains. Furthermore, we compare that with experiments performed at lower temperature and using inhibitors for some endocytotic pathways to pinpoint how lipidation length modifies the main avenues for the transport. We thus show that increasing the length of the lipid chain increases the transport of the drug significantly but also makes endocytosis the primary transport mechanism in a short-term cell culture model.

DNA Self-Assembly of Single Molecules with Deterministic Position and Orientation.

An ideal nanofabrication method should allow the organization of nanoparticles and molecules with nanometric positional precision, stoichiometric control, and well-defined orientation. The DNA origami technique has evolved into a highly versatile bottom-up nanofabrication methodology that fulfils almost all of these features. It enables the nanometric positioning of molecules and nanoparticles with stoichiometric control, and even the orientation of asymmetrical nanoparticles along predefined directions. However, orienting individual molecules has been a standing challenge. Here, we show how single molecules, namely, Cy5 and Cy3 fluorophores, can be incorporated in a DNA origami with controlled orientation by doubly linking them to oligonucleotide strands that are hybridized while leaving unpaired bases in the scaffold. Increasing the number of bases unpaired induces a stretching of the fluorophore linkers, reducing its mobility freedom, and leaves more space for the fluorophore to accommodate and find different sites for interaction with the DNA. Particularly, we explore the effects of leaving 0, 2, 4, 6, and 8 bases unpaired and find extreme orientations for 0 and 8 unpaired bases, corresponding to the molecules being perpendicular and parallel to the DNA double-helix, respectively. We foresee that these results will expand the application field of DNA origami toward the fabrication of nanodevices involving a wide range of orientation-dependent molecular interactions, such as energy transfer, intermolecular electron transport, catalysis, exciton delocalization, or the electromagnetic coupling of a molecule to specific resonant nanoantenna modes.

Optical 4D oxygen mapping of microperfused tissue models with tunable in vivo-like 3D oxygen microenvironments.

Sufficient and controllable oxygen supply is essential for in vitro 3D cell and tissue culture at high cell densities, which calls for volumetric in situ oxygen analysis methods to quantitatively assess the oxygen distribution. This paper presents a general approach for accurate and precise non-contact 3D mapping of oxygen tension in high cell-density cultures via embedded commercially available oxygen microsensor beads read out by confocal phosphorescence lifetime microscopy (PLIM). Optimal acquisition conditions and data analysis procedures are established and implemented in a publicly available software package. The versatility of the established method is first demonstrated in model-assisted fluidic design of microperfused 3D printed hydrogel culture chips with the aim of full culture oxygenation, and subsequently for monitoring and maintenance of physiologically relevant spatial and temporal oxygen gradients in the 3D printed chips controlled by static or dynamic flow conditions during 3D culture.

DNA Origami Calibrators for Counting Fluorophores on Single Particles by Flow Cytometry.

Flow cytometry (FCM) is a high-throughput fluorescence-based technique for multiparameter analysis of individual particles, including cells and nanoparticles. Currently, however, FCM does in many cases not permit proper counting of fluorophore-tagged markers on individual particles, due to a lack of tools for translating FCM output intensities into accurate numbers of fluorophores. This lack hinders derivation of detailed biologic information and comparison of data between experiments with FCM. To address this technological void, the authors here use DNA nanotechnology to design and construct barrel-shaped DNA-origami nanobeads for fluorescence/antigen quantification in FCM. Each bead contains a specific number of calibrator fluorophores and a fluorescent trigger domain with an alternative fluorophore for proper detection in FCM. Using electron microscopy, single-particle fluorescence microscopy, and FCM, the design of each particle is verified. To validate that the DNA bead-based FCM calibration enabled the authors to determine the number of antigens on a biological particle, the uniform and well-characterized murine leukemia virus (MLV) is studied. 48 ± 11 envelope surface protein (Env) trimers per MLV is obtained, which is consistent with reported numbers that relied on low-throughput imaging. Thus, the authors' DNA-beads should accelerate quantitative studies of the biology of individual particles with FCM.

Imaging therapeutic peptide transport across intestinal barriers.

Oral delivery is a highly preferred method for drug administration due to high patient compliance. However, oral administration is intrinsically challenging for pharmacologically interesting drug classes, in particular pharmaceutical peptides, due to the biological barriers associated with the gastrointestinal tract. In this review, we start by summarizing the pharmacological performance of several clinically relevant orally administrated therapeutic peptides, highlighting their low bioavailabilities. Thus, there is a strong need to increase the transport of peptide drugs across the intestinal barrier to realize future treatment needs and further development in the field. Currently, progress is hampered by a lack of understanding of transport mechanisms that govern intestinal absorption and transport of peptide drugs, including the effects of the permeability enhancers commonly used to mediate uptake. We describe how, for the past decades, mechanistic insights have predominantly been gained using functional assays with end-point read-out capabilities, which only allow indirect study of peptide transport mechanisms. We then focus on fluorescence imaging that, on the other hand, provides opportunities to directly visualize and thus follow peptide transport at high spatiotemporal resolution. Consequently, it may provide new and detailed mechanistic understanding of the interplay between the physicochemical properties of peptides and cellular processes; an interplay that determines the efficiency of transport. We review current methodology and state of the art in the field of fluorescence imaging to study intestinal barrier transport of peptides, and provide a comprehensive overview of the imaging-compatible in vitro, ex vivo, and in vivo platforms that currently are being developed to accelerate this emerging field of research.

Revealing Plasma Membrane Nano-Domains with Diffusion Analysis Methods.

Nano-domains are sub-light-diffraction-sized heterogeneous areas in the plasma membrane of cells, which are involved in cell signalling and membrane trafficking. Throughout the last thirty years, these nano-domains have been researched extensively and have been the subject of multiple theories and models: the lipid raft theory, the fence model, and the protein oligomerization theory. Strong evidence exists for all of these, and consequently they were combined into a hierarchal model. Measurements of protein and lipid diffusion coefficients and patterns have been instrumental in plasma membrane research and by extension in nano-domain research. This has led to the development of multiple methodologies that can measure diffusion and confinement parameters including single particle tracking, fluorescence correlation spectroscopy, image correlation spectroscopy and fluorescence recovery after photobleaching. Here we review the performance and strengths of these methods in the context of their use in identification and characterization of plasma membrane nano-domains.

Unhindered Brownian Motion of Individual Nanoparticles in Liquid-Phase Scanning Transmission Electron Microscopy.

Liquid-phase transmission electron microscopy (LPTEM) offers label-free imaging of nanoparticle (NP) processes in liquid with sub-nanometer spatial and millisecond temporal resolution. However, LPTEM studies have reported only on NPs moving orders of magnitude slower than expected from bulk aqueous liquid conditions, likely due to strong interactions with the LPTEM liquid-enclosing membranes. We demonstrate how scanning transmission electron microscope (STEM) imaging can be used to measure the motion of individual NPs and agglomerates, which are not hindered by such interactions. Only at low electron flux do we find that individual NPs exhibit Brownian motion consistent with optical control experiments and theoretical predictions for unhindered passive diffusive motion in bulk liquids. For increasing electron flux, we find increasingly faster than passive motion that still appears effectively Brownian. We discuss the possible origins of this beam-sample interaction. This establishes conditions for the use of STEM as a reliable tool for imaging nanoscale hydrodynamics in situ TEM.

Regulation of Plasma Membrane Nanodomains of the Water Channel Aquaporin-3 Revealed by Fixed and Live Photoactivated Localization Microscopy.

Several aquaporin (AQP) water channels are short-term regulated by the messenger cyclic adenosine monophosphate (cAMP), including AQP3. Bulk measurements show that cAMP can change diffusive properties of AQP3; however, it remains unknown how elevated cAMP affects AQP3 organization at the nanoscale. Here we analyzed AQP3 nano-organization following cAMP stimulation using photoactivated localization microscopy (PALM) of fixed cells combined with pair correlation analysis. Moreover, in live cells, we combined PALM acquisitions of single fluorophores with single-particle tracking (spt-PALM). These analyses revealed that AQP3 tends to cluster and that the diffusive mobility is confined to nanodomains with radii of ∼150 nm. This domain size increases by ∼30% upon elevation of cAMP, which, however, is not accompanied by a significant increase in the confined diffusion coefficient. This regulation of AQP3 organization at the nanoscale may be important for understanding the mechanisms of water AQP3-mediated water transport across plasma membranes.

How To Characterize Individual Nanosize Liposomes with Simple Self-Calibrating Fluorescence Microscopy.

Nanosize lipid vesicles are used extensively at the interface between nanotechnology and biology, e.g., as containers for chemical reactions at minute concentrations and vehicles for targeted delivery of pharmaceuticals. Typically, vesicle samples are heterogeneous as regards vesicle size and structural properties. Consequently, vesicles must be characterized individually to ensure correct interpretation of experimental results. Here we do that using dual-color fluorescence labeling of vesicles-of their lipid bilayers and lumens, separately. A vesicle then images as two spots, one in each color channel. A simple image analysis determines the total intensity and width of each spot. These four data all depend on the vesicle radius in a simple manner for vesicles that are spherical, unilamellar, and optimal encapsulators of molecular cargo. This permits identification of such ideal vesicles. They in turn enable calibration of the dual-color fluorescence microscopy images they appear in. Since this calibration is not a separate experiment but an analysis of images of vesicles to be characterized, it eliminates the potential source of error that a separate calibration experiment would have been. Nonideal vesicles in the same images were characterized by how their four data violate the calibrated relationship established for ideal vesicles. In this way, our method yields size, shape, lamellarity, and encapsulation efficiency of each imaged vesicle. Applying this procedure to extruded samples of vesicles, we found that, contrary to common assumptions, only a fraction of vesicles are ideal.

Erratum: "Calibration-on-the-spot": How to calibrate an EMCCD camera from its images.

This corrects the article DOI: 10.1038/srep28680.

"Calibration-on-the-spot": How to calibrate an EMCCD camera from its images.

In order to count photons with a camera, the camera must be calibrated. Photon counting is necessary, e.g., to determine the precision of localization-based super-resolution microscopy. Here we present a protocol that calibrates an EMCCD camera from information contained in isolated, diffraction-limited spots in any image taken by the camera, thus making dedicated calibration procedures redundant by enabling calibration post festum, from images filed without calibration information.

Optimized measurements of separations and angles between intra-molecular fluorescent markers.

We demonstrate a novel, yet simple tool for the study of structure and function of biomolecules by extending two-colour co-localization microscopy to fluorescent molecules with fixed orientations and in intra-molecular proximity. From each colour-separated microscope image in a time-lapse movie and using only simple means, we simultaneously determine both the relative (x,y)-separation of the fluorophores and their individual orientations in space with accuracy and precision. The positions and orientations of two domains of the same molecule are thus time-resolved. Using short double-stranded DNA molecules internally labelled with two fixed fluorophores, we demonstrate the accuracy and precision of our method using the known structure of double-stranded DNA as a benchmark, resolve 10-base-pair differences in fluorophore separations, and determine the unique 3D orientation of each DNA molecule, thereby establishing short, double-labelled DNA molecules as probes of 3D orientation of anything to which one can attach them firmly.

Harmonic force spectroscopy measures load-dependent kinetics of individual human ß-cardiac myosin molecules.

Molecular motors are responsible for numerous cellular processes from cargo transport to heart contraction. Their interactions with other cellular components are often transient and exhibit kinetics that depend on load. Here, we measure such interactions using 'harmonic force spectroscopy'. In this method, harmonic oscillation of the sample stage of a laser trap immediately, automatically and randomly applies sinusoidally varying loads to a single motor molecule interacting with a single track along which it moves. The experimental protocol and the data analysis are simple, fast and efficient. The protocol accumulates statistics fast enough to deliver single-molecule results from single-molecule experiments. We demonstrate the method's performance by measuring the force-dependent kinetics of individual human ß-cardiac myosin molecules interacting with an actin filament at physiological ATP concentration. We show that a molecule's ADP release rate depends exponentially on the applied load, in qualitative agreement with cardiac muscle, which contracts with a velocity inversely proportional to external load.

Caulobacter chromosome in vivo configuration matches model predictions for a supercoiled polymer in a cell-like confinement.

We measured the distance between fluorescent-labeled DNA loci of various interloci contour lengths in Caulobacter crescentus swarmer cells to determine the in vivo configuration of the chromosome. For DNA segments less than about 300 kb, the mean interloci distances, , scale as n(0.22), where n is the contour length, and cell-to-cell distribution of the interloci distance r is a universal function of r/n(0.22) with broad cell-to-cell variability. For DNA segments greater than about 300 kb, the mean interloci distances scale as n, in agreement with previous observations. The 0.22 value of the scaling exponent for short DNA segments is consistent with theoretical predictions for a branched DNA polymer structure. Predictions from Brownian dynamics simulations of the packing of supercoiled DNA polymers in an elongated cell-like confinement are also consistent with a branched DNA structure, and simulated interloci distance distributions predict that confinement leads to "freezing" of the supercoiled configuration. Lateral positions of labeled loci at comparable positions along the length of the cell are strongly correlated when the longitudinal locus positions differ by <0.16 µm. We conclude that the chromosome structure is supercoiled locally and elongated at large length scales and that substantial cell-to-cell variability in the interloci distances indicates that in vivo crowding prevents the chromosome from reaching an equilibrium arrangement. We suggest that the force causing rapid transport of loci remote from the parS centromere to the distal cell pole may arise from the release at the polar region of potential energy within the supercoiled DNA.

Optimized localization analysis for single-molecule tracking and super-resolution microscopy.

We optimally localized isolated fluorescent beads and molecules imaged as diffraction-limited spots, determined the orientation of molecules and present reliable formulas for the precision of various localization methods. Both theory and experimental data showed that unweighted least-squares fitting of a Gaussian squanders one-third of the available information, a popular formula for its precision exaggerates beyond Fisher's information limit, and weighted least-squares may do worse, whereas maximum-likelihood fitting is practically optimal.