Oxidation Treatments Using Hydrogen Peroxide to Convert Paper-Grade Eucalyptus Kraft Pulp into Dissolving-Grade Pulp.

Converting paper-grade bleached Kraft pulp into dissolving pulp using eco-friendly chemicals on-site at the mill is a challenge for the pulp industry. In this study, two oxidation systems are evaluated: the first one is based on the use of hydrogen peroxide at various levels of alkalinity; the second one investigates the use of sodium periodate followed by hydrogen peroxide to convert aldehydes into carboxyls and enhance their hemicelluloses removal. Our results have shown that when using only peroxide, the removal of hemicelluloses was not sufficient to improve the pulp's dissolving ability. Conversely, the periodate-peroxide system proved to be more efficient. Results regarding the pulp purity, solubility, degradation (pulp viscosity and cellulose molecular mass distribution), brightness, and its potential applications were discussed.

ClO2-Mediated Oxidation of the TEMPO Radical: Fundamental Considerations of the Catalytic System for the Oxidation of Cellulose Fibers.

The reaction mechanism of ClO2-mediated TEMPO oxidation was investigated by EPR spectroscopy and UV-Vis spectroscopy in the context of an alternative TEMPO sequence for cellulose fiber oxidation. Without the presence of a cellulosic substrate, a reversibility between TEMPO and its oxidation product, TEMPO+, was displayed, with an effect of the pH and reagent molar ratios. The involvement of HOCl and Cl-, formed as byproducts in the oxidation mechanism, was also evidenced. Trapping HOCl partly inhibits the reaction, whereas adding methylglucoside, a cellulose model compound, inhibits the reversibility of the reaction to TEMPO.

Oxidation treatments to convert paper-grade Eucalyptus kraft pulp into microfibrillated cellulose.

Microfibrillated cellulose (MFC) is an emerging cellulosic material that has shown enormous potential in various industrial sectors such as food packaging, cosmetics, pharmaceuticals, filler for cement and paper, and others. Yet, there is still the need to improve its processing in order to reach its full potential. Despite research efforts for the production of MFC, the production volumes remain low because the costs of these products are hardly competitive with synthetic polymers. The present study investigates the conversion of bleached Kraft pulp into MFC using three different oxidative treatments: (1) oxidation with sodium periodate followed by oxidation with hydrogen peroxide to enrich the pulp with carboxyl groups; (2) activation of hydrogen peroxide with copper to produce hydroxyl radicals; and (3) use of hydrogen peroxide alone in alkaline medium. Treatments (1) and (2) allowed producing interesting MFC with reduced energy consumption.

Study of the Reactivity of Lignin Model Compounds to Fluorobenzylation Using 13C and 19F NMR: Application to Lignin Phenolic Hydroxyl Group Quantification by 19F NMR.

Lignin is an aromatic biopolymer derived from lignocellulosic biomass. Providing a comprehensive structural analysis of lignin is the primary motivation for the quantification of various functional groups, with a view to valorizing lignin in a wide range of applications. This study investigated the lignin fluorobenzylation reaction and performed a subsequent 19F-NMR analysis to quantify hydroxyl groups, based on a work developed two decades ago by Barrelle et al. The objectives were to check the assignments proposed in this previous study and to examine the reactivity of various types of lignin hydroxyls with the derivatization agent. Selected lignin model compounds containing phenolic and aliphatic hydroxyls were subjected to the fluorobenzylation reaction, and the obtained reaction medium was analyzed by 13C and 19F NMR spectroscopy. The model compound results showed that phenolic hydroxyls were totally derivatized, whereas aliphatic hydroxyls underwent minimal conversion. They also confirmed that 19F NMR chemical shifts from -115 ppm to -117.3 ppm corresponded to phenolic groups. Then, a 19F NMR analysis was successfully applied to Organosolv commercial lignin after fluorobenzylation in order to quantify its phenolic group content; the values were found to be in the range of the reported values using other analytical techniques after lignin acetylation.

Accurate molar masses of cellulose for the determination of degradation rates in complex paper samples.

Complex cellulosic samples are often difficult to analyse with size-exclusion chromatography. The strong molecular associations of hemicelluloses and lignin with cellulose produce multimodal molar mass distributions (MMD) that are difficult to interpret. More reliable ways of calculating the molar masses of cellulose are thus necessary. This is particularly relevant when studying the kinetics of paper degradation, as the number average molar mass is the most precise indicator. In this study various data handling methods based on the deconvolution of bimodal and multimodal MMDs of complex cellulosic samples after SEC-MALS-DRI analysis are examined in order to propose more accurate paper degradation rates. Two deconvolution methods, which do or do not rely on polymer calibration curves were developed and were applied to several kraft and groundwood pulp papers unaged and hygrothermally aged. The deconvolution methods are discussed and evaluated in light of calculated cellulose activation energies, degradation rates and paper usable lifetime predictions.

Bioconversion of Lignocellulosic Biomass to Fermentable Sugars by Immobilized Magnetic Cellulolytic Enzyme Cocktails.

Enzyme cocktails of reusable, highly stable cellulolytic enzymes play an inevitable role in bioconversion of biomass to biofuels economically. Cellulase, xylanase and ß-1,3-glucanase bound silica-amine functionalized iron oxide magnetic nanoparticles (ISN-CLEAs) were prepared and used as the biocatalyst for the depolymerization of cellulosic biomass into monomeric sugar in the present study. The Fe3O4-NPs and Fe3O4@SiO2-NH2-NPs and ISN-CLEAs had an average hydrodynamic size of 82.2, 86.4, and 976.9 nm, respectively, which was confirmed by dynamic light scattering (DLS). About 97% of protein binding was achieved with 135 mM glutaraldehyde at 10 h of cross-linking time and successful binding was confirmed by Fourier transform infrared spectroscopy (FTIR). The ISN-CLEAs exhibited the highest thermal stability of 95% at 50 °C for 2 h and retained extended storage stability of 97% compared to 60% of its free counterpart. Besides, cross-linking allowed ISN-CLEAs reuse for at least eight consecutive cycles retaining over 70% of its initial activity. ISN-CLEAs exhibited approximately 15% increase in carbohydrate digestibility on sugar cane bagasse and eucalyptus pulp than the free enzyme.

Study of the Direct Red 81 Dye/Copper(II)-Phenanthroline System.

Recovered papers contain several chromophores, such as wood lignin and dyes. These have to be eliminated during paper recycling in order to produce white paper. Hydrogen peroxide under alkaline conditions is generally used to decolorize lignin, but its effect on dyes is limited. Copper(II)-phenanthroline (Cu-Phen) complexes can activate the oxidation of lignin by hydrogen peroxide. Hydrogen peroxide may also be activated during recycled fiber bleaching, thus enhancing its color-stripping efficiency towards unoxidizable azo dyes. The purpose of this paper was to determine the effect of Cu-Phen complexes on a model azo dye, Direct Red 81 (DR81), in aqueous solution. Different Cu-Phen solutions (with different initial Cu:Phen molar ratios) were prepared and mixed with the dye at different pHs. The geochemical computer program PHREEQC allowed precise calculation of the theoretical distribution between different possible coordinates (CuPhenOH⁺, Cu(Phen)22+, CuPhen(OH)2, Cu(Phen)32+, etc.) depending on pH and initial concentrations. UV-vis spectroscopic measurements were correlated with the major species theoretically present in each condition. The UV absorbance of the system was mainly attributed to the Cu-Phen complex and the visible absorbance was only due to the dye. Cu-Phen appeared to reduce the color intensity of the DR81 dye aqueous solution under specific conditions (more effective at pH 10.7 with Cu:Phen = 1:1), probably owing to the occurrence of a coordination phenomenon between DR81 and Cu-Phen. Hence, the ligand competition between phenanthroline and hydroxide ions would be disturbed by a third competitor, which is the dye molecule. Further investigation proved that the DR81 dye is able to form a complex with copper-phenanthroline, leading to partial color-stripping. This new "color-stripping effect" may be a new opportunity in paper and textile industries for wastewater treatment.

Ultrasonic assisted production of starch nanoparticles: Structural characterization and mechanism of disintegration.

In this paper, the disintegration of starch (waxy and standard starch) granules into nanosized particles under the sole effect of high power ultrasonication treatment in water/isopropanol is investigated, by using wide methods of analysis. The present work aims at a fully characterization of the starch nanoparticles produced by ultrasonication, in terms of size, morphology and structural properties, and the proposition of a possible mechanism explaining the top-down generation of starch nanoparticles (SNPs) via high intensity ultrasonication. Dynamic light scattering measurements have indicated a leveling of the particle size to about 40nm after 75min of ultrasonication. The WAXD, DSC and Raman have revealed the amorphous character of the SNPs. FE-SEM. AFM observations have confirmed the size measured by DLS and suggested that SNPs exhibited 2D morphology of platelet-like shapes. This morphology is further supported by SAXS. On the basis of data collected from the different characterization techniques, a possible mechanism explaining the disintegration process of starch granules into NPs is proposed.

Whole Proteome Analyses on Ruminiclostridium cellulolyticum Show a Modulation of the Cellulolysis Machinery in Response to Cellulosic Materials with Subtle Differences in Chemical and Structural Properties.

Lignocellulosic materials from municipal solid waste emerge as attractive resources for anaerobic digestion biorefinery. To increase the knowledge required for establishing efficient bioprocesses, dynamics of batch fermentation by the cellulolytic bacterium Ruminiclostridium cellulolyticum were compared using three cellulosic materials, paper handkerchief, cotton discs and Whatman filter paper. Fermentation of paper handkerchief occurred the fastest and resulted in a specific metabolic profile: it resulted in the lowest acetate-to-lactate and acetate-to-ethanol ratios. By shotgun proteomic analyses of paper handkerchief and Whatman paper incubations, 151 proteins with significantly different levels were detected, including 20 of the 65 cellulosomal components, 8 non-cellulosomal CAZymes and 44 distinct extracytoplasmic proteins. Consistent with the specific metabolic profile observed, many enzymes from the central carbon catabolic pathways had higher levels in paper handkerchief incubations. Among the quantified CAZymes and cellulosomal components, 10 endoglucanases mainly from the GH9 families and 7 other cellulosomal subunits had lower levels in paper handkerchief incubations. An in-depth characterization of the materials used showed that the lower levels of endoglucanases in paper handkerchief incubations could hypothetically result from its lower crystallinity index (50%) and degree of polymerization (970). By contrast, the higher hemicellulose rate in paper handkerchief (13.87%) did not result in the enhanced expression of enzyme with xylanase as primary activity, including enzymes from the "xyl-doc" cluster. It suggests the absence, in this material, of molecular structures that specifically lead to xylanase induction. The integrated approach developed in this work shows that subtle differences among cellulosic materials regarding chemical and structural characteristics have significant effects on expressed bacterial functions, in particular the cellulolysis machinery, resulting in different metabolic patterns and degradation dynamics.

Structural investigation of cellulose nanocrystals extracted from chili leftover and their reinforcement in cariflex-IR rubber latex.

The morphology and chemical composition of chili fibres were investigated. Unusual low lignin content was found when compared to other annual plants. High aspect ratio cellulose nanocrystals (CNCs) were prepared from these fibres by an acid hydrolysis treatment. CNCs extracted from chili leftover were characterized using FT-IR, AFM, TGA and XRD to access their functional, structural, thermal and crystallinity properties, respectively. The length and diameter of the chili leftover CNC were 90-180 nm and 4-6 nm, respectively, resulting in an average aspect ratio of 26. This high aspect ratio ensures percolation at low filler content which in turn results in high thermal and mechanical properties of the nanocomposites. These CNCs were used to prepare nanocomposite films using the highly marketing commercial latex called Cariflex-Isoprene (IR) by casting/evaporation in order to investigate their reinforcing effect. The mechanical properties of nanocomposite films were investigated in both the linear and nonlinear range by DMA and tensile test, respectively, and their morphology was studied using scanning electron microscopy.

Control of size and viscoelastic properties of nanofibrillated cellulose from palm tree by varying the TEMPO-mediated oxidation time.

The main objective of the present study was to control and optimize the preparation of nanofibrillated cellulose (NFC) from the date palm tree by monitoring the oxidation time (degree of oxidation) of the pristine cellulose and the number of cycles through the homogenizer. The oxidation was monitored by TEMPO (1-oxo-2,2,6,6-tétraméthylpipyridine 1-oxyle) mediated oxidation. Evidence of the successful isolation of NFC was given by FE-SEM observation revealing fibrils with a width in the range 20-30nm, depending of the oxidation time. The evolution of the transparency of the aqueous NFC suspension and carboxylic content according to the degree of oxidation and number of cycles were also analyzed by UV-vis transmittance, Fourier-transform infrared spectroscopy (FT-IR), conductimetry, and X-ray diffraction analysis. A significant NFC length reduction occurred during the TEMPO-mediated oxidation. The rheological properties of NFC suspensions were characterized as function of the oxidation time. Dynamic rheology showed that the aqueous suspension behavior changed from liquid to gel depending on the concentration. The highest concentration studied was 1wt% and the modulus reached 1MPa which was higher than for non-oxidized NFC. An explanation of the gel structure evolution with the oxidation time applied to the NFC (NFC length) was proposed. The gel structure evolves from an entanglement-governed gel structure to an immobilized water molecule-governed one.

WITHDRAWN: Elucidation of structural condensation in lignin of eastern cottonwood.

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at http://www.elsevier.com/locate/withdrawalpolicy.

Isolation of residual lignin from softwood kraft pulp. Advantages of the acetic acid acidolysis method.

Lignin in kraft pulp was extracted by enzymatic hydrolysis of the carbohydrates, acidolysis with dioxane-water-HCl (conventional method), and acidolysis with acetic acid-water-ZnCl2. The latter method was shown to extract lignin with a better yield than for conventional acidolysis and with a much lower content in impurities than for enzymatic hydrolysis. It was confirmed by 13C NMR analysis of the lignin samples that conventional hydrolysis modified the lignin polymer, causing the cleavage of some aryl-ether linkages. The cleavage was also observed on a model compound submitted to the same extraction conditions. In that respect, the acetic acid-water-ZnCl2 method was less damaging and consequently more suitable for analytical purposes.

Comparative evaluation of size-exclusion chromatography and viscometry for the characterisation of cellulose.

The analysis using size-exclusion chromatography (SEC) with multi-angle light scattering (MALS) and differential refractive index (DRI) detection of cellulose dissolved in lithium chloride/N,N-dimethylacetamide (LiCI/DMAc) is evaluated and compared to two other methods currently used for cellulose analysis. These are SEC with low-angle light scattering (LALS) and ultra-violet detection of cellulose derivatised to tricarbanilates (CTC), and viscometry in cadmium triethylene diamine dihydroxide (cadoxen). The cellulose source is Whatman No. 1 paper, unaged or artificially aged with a combination of heat and humidity. The values of the molar mass (Mr) averages of cellulose obtained with the different methods resulted quite different for both aged and unaged paper. SEC of cellulose in LiCl/DMAc provided the highest Mr averages values, followed by SEC of CTC, while viscometry yielded the lowest values. These differences were more or less pronounced depending on the initial degradation state of the paper. Several hypotheses are presented in order to explain these discrepancies and each method is discussed on the basis of its suitability to characterise the aging-induced degradation.