Factors affecting the leaching of micro and nanoplastics in the water distribution system.

The role of the water distribution system (WDS) requires that it supply water of sufficient quality to households. Unregulated leaching of micro and nanoplastics from plastic pipes of the distribution system is therefore a cause for concern, particularly with the rise in research associating these plastic particles to adverse health impacts in living organisms. Within this study, four parameters (pH, free chlorine concentration, pipe material, and time) were varied in a pipe loop network to observe their effect on microplastic (MP) and nanoplastic (NP) leaching into the simulated distribution network. Results indicated an abundance of MPs/NPs in different shapes and sizes throughout the samples. Graphical trends illustrated that basic pH values contributed to a higher number of particles. Statistical analysis via analysis of variance (ANOVA) confirmed this observation and further showed interaction of chlorine dose and pH concentration (p-value = 0.000), and chlorine dose and pipe material (p-value = 0.038) was also significant to leaching. Numerically, polyethylene (PE) particles were the most abundant with a total of 15194 particles, followed by 12920 polypropylene random copolymer (PPR) particles and 12317 polyvinyl chloride (PVC) particles. It was also noticed that the number of particles decreased with time.© 2023 Elsevier Inc. All rights reserved.

Leachability of microplastic from different plastic materials.

The use of plastic has become common. Large amounts of plastic waste are disposed in landfill without the ability to biodegrade. These plastic materials often disintegrate into microplastic that end up in the leachate, a wastewater stream containing harmful contaminants extracted from the plastic. These particles can eventually contaminate the groundwater. The main objective of this research is to evaluate the leaching of microplastics originated from different types of plastic materials and to evaluate the role of pH in the disintegration process. In this study, seven different types of plastic wastes were investigated. These include Polyethylene Terephthalate (PET), High-Density Polyethylene (HDPE), Polyvinyl Chloride (PVC), Low-Density Polyethylene (LDPE), Polypropylene (PP), Polystyrene (PS), and Polycarbonate (PC). Batch leaching tests were carried out to generate leachate from these plastic materials. The leachate generated from the test was eventually tested for different water quality parameters. Characterization of microplastic particles was conducted using SEM-EDX, FT-IR and particle size analyser. Results revealed that leachates from PET, LDPE, PS and PP contained fibres in addition to other particles. Results showed that PC (19868 items/L) has the largest, while PET (4099 items/L) has the smallest number of microplastic particles per litre. The results indicated PC (184.1 mg/L) has the highest concentration in mass/L and PS (43.1 mg/L) has the smallest concentrations. The study also revealed pH has a significant impact on the leachability of plastic materials and the turbidity of the leachate. Acidic and basic pH levels are more aggressive to plastic materials than neutral pH levels. SEM analysis found that PET and LDPE leachates contained fibres. EDX analysis conducted on the microplastics indicated the presence of elements indicative of the plastic types. FT-IR analysis was not conclusive for all the materials. Microplastic sizes were mostly small and less than 500 nm for most of the samples. The study concludes that the microplastic particles can disintegrate from the original plastic materials under suitable conditions. The outcome of this study can be used for efficient use of different plastic materials and management of its eventual waste materials.

Sustainable Management of Organic Wastes in Sharjah, UAE through Co-Composting.

Daily human activities and vast green areas produce substantial amounts of organic wastes that end up in landfills with minimal treatment. In addition to the problems associated with landfills, disposal through this method is unsustainable in the long run and does not allow recovering materials from the waste. This paper focuses on the co-composting of different organic wastes produced in The Emirate of Sharjah, United Arab Emirates (UAE), to optimize mixing proportions of three different kinds of wastes-sewage sludge (SS), green waste (GW), and food waste (FW). All three organic wastes were analyzed to determine their chemical composition and the mixing proportions. Ten different mixing proportions as a function of carbon:nitrogen (C:N ratios) were determined and mixed in a NatureMill composter. Compost samples were tested for pH, salinity, conductivity, moisture content, organic matter, organic carbon, phosphorus, total nitrogen, and final C:N ratio after 6 weeks. Results indicate that a period of 5-6 weeks is sufficient for the compost to stabilize. The varying mixing proportions produced a good-quality compost (C:N up to 20:1) with high nutrient content. The study reaffirms that co-composting can be a potential sustainable organic waste management option for the United Arab Emirates.

Evaluation of microplastics in beach sediments along the coast of Dubai, UAE.

Microplastic contamination in beach sediments along coast of Dubai is un-documented. In this study, microplastic contamination in beach sediments collected from the wrack lines of 16 beaches in Dubai was evaluated. Five samples were collected from each beach along a 100 m stretch using a 0.5 m by 0.5 m, quadrant. The number, color, and shape of microplastics were documented. The polymer types of large fibers and strings were identified through FT-IR analysis. 480 microplastics from each of the 16 beaches were selected to detect heavy metals using XRF analysis. The results showed that the average weight of microplastic is 0.33 mg per gram of dry sediment (or 953 mg·m-2) and the number of microplastic is 59.71 items per kg of dry sediment (or 165 items·m-2). Blue and fibrous microplastics were dominant. Polyethylene strings and fibers were abundantly found. 13 heavy metals were identified of which five are priority pollutants.