RESUMO
Cavitands are established tools of supramolecular chemistry and molecular recognition, and they are finding increasing application in sensing and sequestration of physiologically relevant molecules in aqueous solution. The synthesis of a water-soluble, deep cavitand is described. The route comprises six (linear) steps from commercially available precursors, and it relies on the fourfold oligomeric cyclization reaction of resorcinol with 2,3-dihydrofuran that leads to the formation of a shallow resorcinarene framework; condensation with aromatic panels, which deepens the hydrophobic binding cavity; construction of rigid urea functionalities on the upper rim; and the introduction of the water-solubilizing methylimidazolium groups on the lower rim. Late intermediates of the synthesis can be used in the preparation of congener cavitands with different properties and applications, and a sample of such a synthetic procedure is included in this protocol. Emphasis is placed on scaled-up reactions and on purification procedures that afford materials in high yield and avoid chromatographic purification. This protocol provides improvements over previously described procedures, and it enables the preparation of sizable amounts of deep cavitands: 7 g of a water-soluble cavitand can be prepared from resorcinol in 13 working days.
Assuntos
Técnicas de Química Sintética/métodos , Éteres Cíclicos/química , Éteres Cíclicos/síntese química , Resorcinóis/química , Resorcinóis/síntese química , Água/química , Modelos Moleculares , Conformação Molecular , Solubilidade , TemperaturaRESUMO
The majority of reactions currently performed in the chemical industry take place in organic solvents, compounds that are generally derived from petrochemicals. To promote chemical processes in water, we examined the use of synthetic, deep water-soluble cavitands in the Staudinger reduction of long-chain aliphatic diazides (C8 , C10 , and C12 ). The diazide substrates are taken up by the cavitand in D2 O in folded, dynamic conformations. The reduction of one azide group to an amine gives a complex in which the substrate is fixed in an unsymmetrical conformation, with the amine terminal exposed and the azide terminal deep and inaccessible within the cavitand. Accordingly, the reduction of the second azide group is inhibited, even with excess phosphine, and good yields of the monofunctionalized products are obtained. In contrast, the reduction of the free diazides in bulk solution yields diamine products.
RESUMO
Cyclization reactions are common processes in organic chemistry and show familiar patterns of reaction rates vs ring size. While the details vary with the nature of bond being made and the number of unsaturated atoms, small rings typically form quickly despite angle strain, medium size rings form very slowly due to internal strains, and large rings form slowly (when they form at all) because fewer and less probable conformations bring the ends of the substrate together. High dilution is commonly used to slow the competing bi- and higher molecular processes. Here we apply cavitands to the formation of medium size lactams from ω-amino acids in aqueous (D2O) solution. The cavitands bind the amino acids in folded conformations that favor cyclization by bringing the ends closer together. Yields of a 12-membered lactam are improved 4.1-fold and 13-membered lactam 2.8-fold by the cavitand template. The results open possibilities for moving organic reactions into water even when the processes involve dehydration.
RESUMO
One of the largest driving forces for molecular association in aqueous solution is the hydrophobic effect, and many synthetic receptors with hydrophobic interiors have been devised for molecular recognition studies in water. Attempts to create the longer, narrower cavities appropriate for long-chain fatty acids have been thwarted by solvophobic collapse of the synthetic receptors, giving structures that have no internal spaces. The collapse generally involves the stacking of aromatic panels onto themselves. We describe here the synthesis and application of a deep cavitand receptor featuring "prestacked" aromatic panels at the upper rim of the binding pocket. The cavitand remains open and readily sequesters biologically relevant long-chain molecules-unsaturated ω-3, -6, and -9 fatty acids and derivatives such as anandamide-from aqueous media. The cavitand exists in isomeric forms with different stacking geometries and n-alkanes were used to characterize the binding modes and conformational properties. Long alkyl chains are accommodated in inverted J-shaped conformations. An analogous cavitand with electron-rich aromatic walls was prepared and comparative binding experiments indicated the role of intramolecular stacking in the binding properties of these deep container molecules.
Assuntos
Éteres Cíclicos/química , Proteínas de Ligação a Ácido Graxo/química , Ácidos Graxos Insaturados/química , Resorcinóis/química , Sítios de Ligação , Éteres Cíclicos/síntese química , Éteres Cíclicos/metabolismo , Proteínas de Ligação a Ácido Graxo/síntese química , Proteínas de Ligação a Ácido Graxo/metabolismo , Ácidos Graxos Ômega-3/química , Ácidos Graxos Ômega-3/metabolismo , Ácidos Graxos Ômega-6/química , Ácidos Graxos Ômega-6/metabolismo , Ácidos Graxos Insaturados/metabolismo , Interações Hidrofóbicas e Hidrofílicas , Espectroscopia de Ressonância Magnética , Modelos Químicos , Modelos Moleculares , Conformação Molecular , Estrutura Molecular , Ligação Proteica , Resorcinóis/síntese química , Resorcinóis/metabolismo , TermodinâmicaRESUMO
Many biological functions at cell level are mediated by the glycocalyx, a dense carbohydrate-presenting layer. In this layer specific interactions between carbohydrate ligands and protein receptors are formed to control cell-cell recognition, cell adhesion and related processes. The aim of this work is to shed light on the principles of complex formation between surface anchored carbohydrates and receptor surfaces by measuring the specific adhesion between surface bound mannose on a concanavalin A (ConA) layer via poly(ethylene glycol)-(PEG)-based soft colloidal probes (SCPs). Special emphasis is on the dependence of multivalent presentation and density of carbohydrate units on specific adhesion. Consequently, we first present a synthetic strategy that allows for controlled density variation of functional groups on the PEG scaffold using unsaturated carboxylic acids (crotonic acid, acrylic acid, methacrylic acid) as grafting units for mannose conjugation. We showed by a range of analytic techniques (ATR-FTIR, Raman microscopy, zeta potential and titration) that this synthetic strategy allows for straightforward variation in grafting density and grafting length enabling the controlled presentation of mannose units on the PEG network. Finally we determined the specific adhesion of PEG-network-conjugated mannose units on ConA surfaces as a function of density and grafting type. Remarkably, the results indicated the absence of a molecular-level enhancement of mannose/ConA interaction due to chelate- or subsite-binding. The results seem to support the fact that weak carbohydrate interactions at mechanically flexible interfaces hardly undergo multivalent binding but are simply mediated by the high number of ligand-receptor interactions.
RESUMO
Synthetic glycooligomers have emerged as valuable analogues for multivalent glycan structures in nature. These multivalent carbohydrates bind to specific receptors and play a key role in biological processes. In this work, we investigate the specific interaction between mannose ligand presenting soft colloidal probes (SCPs) attached to an atomic force microscope (AFM) cantilever and a Concanavalin A (ConA) receptor surface in the presence of competing glycooligomer ligands. We studied the SCP-ConA adhesion energy via the JKR approach and AFM pull-off experiments in combination with optical microscopy allowing for simultaneous determination of the contact area between SCP and ConA surface. We varied the contact time, loading rate and loading force and measured the resulting mannose/ConA interaction. The average adhesion energy per mannose ligand on the probe was 5 kJ/mol, suggesting that a fraction of mannose ligands presented on the SCP bound to the receptor surface. Adhesion measurements via competitive binding of the SCP in the presence of multivalent glycooligomer ligands did not indicate an influence of their multivalency on the glycooligomer displacement from the ConA surface. The absence of this "multivalency effect" indicates that glycooligomers and ConA do not associate via chelate complexes and shows that steric shielding by the glycooligomers does not slow their displacement upon competitive binding of a ligand presenting surface. These results highlight the high reversibility of carbohydrate-surface interactions, which could be an essential feature of recognition processes on the cell surface.
Assuntos
Carboidratos/química , Hidrogéis/química , Microscopia de Força Atômica , Coloides/química , Glicoproteínas/química , Inflamação , Concentração Inibidora 50 , Manose/química , Teste de Materiais , Microesferas , Polietilenoglicóis/química , Receptores de Concanavalina A/química , Estresse Mecânico , Propriedades de SuperfícieRESUMO
We introduce a novel class of membrane active peptidomimetics, the amphiphilic cationic ß(3R3)-peptides, and evaluate their potential as antimicrobial agents. The design criteria, the building block and oligomer synthesis as well as a detailed structure-activity relationship (SAR) study are reported. Specifically, infrared reflection absorption spectroscopy (IRRAS) was employed to investigate structural features of amphiphilic cationic ß(3R3)-peptide sequences at the hydrophobic/hydrophilic air/liquid interface. Furthermore, Langmuir monolayers of anionic and zwitterionic phospholipids have been used to model the interactions of amphiphilic cationic ß(3R3)-peptides with prokaryotic and eukaryotic cellular membranes in order to predict their membrane selectivity and elucidate their mechanism of action. Lastly, antimicrobial activity was tested against Gram-positive M. luteus and S. aureus as well as against Gram-negative E. coli and P. aeruginosa bacteria along with testing hemolytic activity and cytotoxicity. We found that amphiphilic cationic ß(3R3)-peptide sequences combine high and selective antimicrobial activity with exceptionally low cytotoxicity in comparison to values reported in the literature. Overall, this study provides further insights into the SAR of antimicrobial peptides and peptidomimetics and indicates that amphiphilic cationic ß(3R3)-peptides are strong candidates for further development as antimicrobial agents with high therapeutic index.
Assuntos
Antibacterianos/farmacologia , Membrana Celular/efeitos dos fármacos , Peptídeos/farmacologia , Peptidomiméticos , Tensoativos/farmacologia , Antibacterianos/síntese química , Antibacterianos/química , Cátions/síntese química , Cátions/química , Cátions/farmacologia , Membrana Celular/metabolismo , Relação Dose-Resposta a Droga , Escherichia coli/efeitos dos fármacos , Testes de Sensibilidade Microbiana , Micrococcus luteus/efeitos dos fármacos , Estrutura Molecular , Peptídeos/síntese química , Peptídeos/química , Pseudomonas aeruginosa/efeitos dos fármacos , Staphylococcus aureus/efeitos dos fármacos , Relação Estrutura-Atividade , Tensoativos/síntese química , Tensoativos/químicaRESUMO
In this study we present the design and synthesis of a novel class of peptidomimetics, the ß(3R3)-peptides. Via alternating directions of the amide bonds along ß-peptide sequences, ß(3R3)-peptides can potentially extend the structural space available to ß-peptidic foldamers. Detailed analysis at the air-water interface shows strand conformations and the formation of sheet assemblies with different degrees of crystallinity. Furthermore ß(3R3)-peptides exhibit a high proteolytic stability thus making them an interesting new class of peptidomimetics for biomedical applications.
Assuntos
Peptídeos/síntese química , Peptidomiméticos/síntese química , Água/química , Ar , Conformação Molecular , Peptídeos/química , Peptidomiméticos/química , Estrutura Secundária de ProteínaRESUMO
Elastic sensors: A simple method is presented for the measurement of specific biomolecular interactions with soft colloidal hydrogel particles (SCPs) as sensors. Carbohydrate/lectin interactions (see picture; green: carbohydrate molecules) were studied by optical detection of the mechanical deformation of the particles on a lectin surface. The affinity of various carbohydrate inhibitors could also be readily determined.
Assuntos
Carboidratos/química , Hidrogel de Polietilenoglicol-Dimetacrilato/síntese química , Microscopia de Interferência/métodos , Polímeros/química , Técnicas Biossensoriais , Hidrogel de Polietilenoglicol-Dimetacrilato/química , Polímeros/síntese químicaRESUMO
Here, we present a new microparticle system for the selective detection and magnetic removal of bacteria from contaminated solutions. The novelty of this system lies in the combination of a biocompatible scaffold reducing unspecific interactions with high capacity for bacteria binding. We apply highly porous poly(ethylene glycol) (PEG) microparticles and functionalize them, introducing both sugar ligands for specific bacteria targeting and cationic moieties for electrostatic loading of superparamagnetic iron oxide nanoparticles. The resulting magnetic, porous, sugar-functionalized (MaPoS) PEG microgels are able to selectively bind and discriminate between different strains of bacteria Escherichia coli . Furthermore, they allow for a highly efficient removal of bacteria from solution as their increased surface area can bind three times more bacteria than nonporous particles. All in all, MaPoS particles represent a novel generation of magnetic beads introducing for the first time a porous, biocompatible and easy to functionalize scaffold and show great potential for various biotechnological applications.
Assuntos
Bactérias/isolamento & purificação , Carboidratos/química , Géis , Magnetismo , Polietilenoglicóis/metabolismo , Microscopia Eletrônica de Transmissão , Nanopartículas , SoluçõesRESUMO
We present for the first time the synthesis of asymmetrically branched sequence-defined poly/oligo(amidoamines) (PAAs) using solid-phase synthesis with the capability of introducing diversity at the side chains. We introduce two new versatile (diethylenetriamine) building blocks for solid-phase synthesis bearing Fmoc/Boc and Fmoc/Alloc protecting groups expanding recently used Fmoc/Boc protecting group strategy for linear PAAs to an Fmoc/Alloc/Boc strategy. This allows for orthogonal on-resin cleavage of Fmoc and Alloc protecting groups during solid-phase synthesis of PAAs with backbones differing in chain length and sequence. With these structures we then demonstrate the potential for generating asymmetrical branching by automated multiple on-resin cleavage of Alloc protecting groups as well as the introduction of side chains varying in length and number. Such systems have high potential as nonviral vectors for gene delivery and will allow for more detailed studies on the correlation between the degree of branching of PAAs and their resulting biological properties.
Assuntos
Diaminas/síntese química , Poliaminas/química , Diaminas/química , Espectroscopia de Ressonância Magnética , Dados de Sequência Molecular , Estrutura Molecular , Técnicas de Síntese em Fase Sólida , EstereoisomerismoRESUMO
The synthesis of monodisperse polymers with a defined monomer sequence is a new challenge in polymer chemistry. Recently, we introduced a novel synthetic strategy towards monodisperse, sequence-defined poly(amidoamine)s based on the stepwise assembly of diamine and diacid building blocks on a solid support. Here we introduce the first chiral building block suitable for the automated poly(amidoamine) synthesis. The synthetic strategy utilizes natural amino acids as starting materials, thus providing a variety of chiral building blocks with different functionalities in the side chain. As a first chiral monomer, L-alanine is transformed into a mono Fmoc-protected diamine building block and successfully introduced into poly(amide) segments.