A Diagnostic Chip for the Colorimetric Detection of Legionella pneumophila in Less than 3 h at the Point of Need.

Legionella pneumophila has been pinpointed by the World Health Organization as the highest health burden of all waterborne pathogens in the European Union and is responsible for many disease outbreaks around the globe. Today, standard analysis methods (based on bacteria culturing onto agar plates) need several days (~12) in specialized analytical laboratories to yield results, not allowing for timely actions to prevent outbreaks. Over the last decades, great efforts have been made to develop more efficient waterborne pathogen diagnostics and faster analysis methods, requiring further advancement of microfluidics and sensors for simple, rapid, accurate, inexpensive, real-time, and on-site methods. Herein, a lab-on-a-chip device integrating sample preparation by accommodating bacteria capture, lysis, and DNA isothermal amplification with fast (less than 3 h) and highly sensitive, colorimetric end-point detection of L. pneumophila in water samples is presented, for use at the point of need. The method is based on the selective capture of viable bacteria on on-chip-immobilized and -lyophilized antibodies, lysis, the loop-mediated amplification (LAMP) of DNA, and end-point detection by a color change, observable by the naked eye and semiquantified by computational image analysis. Competitive advantages are demonstrated, such as low reagent consumption, portability and disposability, color change, storage at RT, and compliance with current legislation.

Spoilage potential of Bacillus subtilis in a neutral-pH dairy dessert.

The objective of this study was the characterization of the microbiota associated with spoilage of vanilla cream pudding during storage at different temperatures. Commercial cream samples were stored aerobically at 4, 8, 12 and 15 °C for a maximum time period of 40 days. At appropriate time intervals, cream samples were subjected to: (i) microbiological analyses, and (ii) high-performance liquid chromatography (HPLC). Furthermore, the spoilage microbiota was identified through repetitive extragenic palindrome-PCR, while selected isolates were further characterized based on sequencing of the V1-V3 region of the 16S rRNA gene. Microbial growth was observed only during storage of cream samples at 12 and 15 °C, with the applied genotypic analysis demonstrating that Bacillus subtilis subsp. subtilis was the dominant spoilage microorganism of this product. Based on the HPLC analysis results, citric acid and sucrose were the most abundant organic acid and sugar, respectively throughout storage of cream pudding, whereas notable changes mainly included: (i) increase in the concentration of lactic acid and to a lesser extent of formic and acetic acids, and (ii) increase in the concentration of glucose and fructose at the expense of sucrose and lactose. The results of this study should be useful for the dairy industry in detecting and controlling microbiological spoilage in cream pudding and other chilled, neutral-pH dairy desserts.

Growth of Listeria monocytogenes in pasteurized vanilla cream pudding as affected by storage temperature and the presence of cinnamon extract.

The objective of the present study was the assessment and quantitative description of the growth behavior of Listeria monocytogenes as a function of temperature in vanilla cream pudding, formulated with or without cinnamon extract. Commercially prepared pasteurized vanilla cream pudding, formulated with (0.1% w/w) or without cinnamon extract, was inoculated with a five-strain mixture of L. monocytogenes (ca. 2logCFU/g) and stored aerobically at 4, 8, 12 and 16°C. At appropriate time intervals, L. monocytogenes populations were determined, and the primary model of Baranyi and Roberts was fitted to the derived microbiological data for the estimation of the pathogen's growth kinetic parameters. The effect of temperature on maximum specific growth rate (µmax) was then modeled for each product type using a square-root-type model, and the developed models were validated using independent growth data generated during storage of inoculated vanilla cream samples under dynamic temperature conditions. Although the kinetic behavior of the pathogen was similar in cream with and without cinnamon extract during storage at higher temperatures, significant (P<0.05) differences were observed between the two product types at 4°C. With regard to secondary modelling, the estimated values of Tmin for cream with and without cinnamon extract were 0.39°C and -2.54°C, respectively, while the dynamic models exhibited satisfactory performance. Finally, as demonstrated by the findings of pulsed-field gel electrophoresis, both temperature and cinnamon extract affected the pathogen's strains dominating during storage. According to the collected data, cinnamon extract exhibits an important potential of enhancing the microbiological safety of vanilla cream pudding, provided that efficient temperature control is in place. The developed models should be useful in quantitative microbial risk assessment regarding the studied cream products.

Effect of Product Dimensions and Surface Browning Method on Salmonella Contamination in Frozen, Surface-Browned, Breaded Chicken Products Treated with Antimicrobials.

Not-ready-to-eat breaded chicken products formulated with antimicrobial ingredients were tested for the effect of sample dimensions, surface browning method and final internal sample temperature on inoculated Salmonella populations. Fresh chicken breast meat portions (5 × 5 × 5 cm), inoculated with Salmonella (7-strain mixture; 5 log CFU/g), were mixed with (5% v/w total moisture enhancement) (i) distilled water (control), (ii) caprylic acid (CAA; 0.0625%) and carvacrol (CAR; 0.075%), (iii) CAA (0.25%) and ε-polylysine (POL; 0.5%), (iv) CAR (0.15%) and POL (0.5%), or (v) CAA (0.0625%), CAR (0.075%) and POL (0.5%). Sodium chloride (1.2%) and sodium tripolyphosphate (0.3%) were added to all treatments. The mixtures were then ground and formed into 9 × 5 × 3 cm (150 g) or 9 × 2.5 × 2 cm (50 g) portions. The products were breaded, browned in (i) an oven (208 °C, 15 min) or (ii) deep fryer (190 °C, 15 s), packaged, and stored at -20 °C (8 d). Overall, maximum internal temperatures of 62.4 ± 4.0 °C (9 × 2.5 × 2 cm) and 46.0 ± 3.0 °C (9 × 5 × 3 cm) were reached in oven-browned samples, and 35.0 ± 1.1 °C (9 × 2.5 × 2 cm) and 31.7 ± 2.6 °C (9 × 5 × 3 cm) in fryer-browned samples. Irrespective of formulation treatment, total (after frozen storage) reductions of Salmonella were greater (P < 0.05) for 9 × 2.5 × 2 cm oven-browned samples (3.8 to at least 4.6 log CFU/g) than for 9 × 5 × 3 cm oven-browned samples (0.7 to 2.5 log CFU/g). Product dimensions did not (P ≥ 0.05) affect Salmonella reductions (0.6 to 2.8 log CFU/g) in fryer-browned samples. All antimicrobial treatments reduced Salmonella to undetectable levels (<0.3 log CFU/g) in oven-browned 9 × 2.5 × 2 cm samples. Overall, the data may be useful for the selection of antimicrobials, product dimensions, and surface browning methods for reducing Salmonella contamination.

Efficacy of chemical interventions against Escherichia coli O157:H7 and multidrug-resistant and antibiotic-susceptible Salmonella on inoculated beef trimmings.

Studies were conducted to compare the decontamination efficacy of six chemical treatments against Escherichia coli O157:H7 and multidrug-resistant and antibiotic-susceptible Salmonella inoculated on beef trimmings. The inocula, comprising four-strain mixtures of rifampin-resistant E. coli O157:H7 and antibiotic-susceptible or multidrug-resistant (MDR and/or MDR-AmpC) Salmonella Newport and Salmonella Typhimurium, were inoculated (3 log CFU/cm(2)) separately onto samples (10 by 5 by 1 cm) derived from beef chuck rolls. Samples were left untreated (control), were immersed for 30 s in acidified sodium chlorite (0.1%, pH 2.5), peroxyacetic acid (0.02%, pH 3.8), sodium metasilicate (4%, pH 12.6), Bromitize Plus (0.0225% active bromine, pH 6.6), or AFTEC 3000 (pH 1.2), or were immersed for 5 s in SYNTRx 3300 (pH 1.0). Levels of surviving Salmonella on treated trimmings were not influenced by serotype or antibiotic resistance phenotype and were generally similar (P ≥ 0.05) or lower (P < 0.05) than levels of surviving E. coli O157:H7 regardless of antimicrobial treatment. Overall, depending on chemical treatment (reductions within each chemical treatment were similar among all tested inocula), initial counts of E. coli O157:H7 (2.7 to 3.1 log CFU/cm(2)) were reduced (P < 0.05) by 0.2 to 1.4 log CFU/cm(2). Similarly, initial counts of the tested Salmonella inocula (2.8 to 3.3 log CFU/cm(2)) were reduced (P < 0.05) by 0.4 to 1.4 (Salmonella Newport, antibiotic susceptible), 0.3 to 1.4 (Salmonella Newport, MDR-AmpC), 0.2 to 1.5 (Salmonella Typhimurium, antibiotic susceptible), 0.4 to 1.3 (Salmonella Typhimurium, MDR), and 0.4 to 1.5 (Salmonella Typhimurium, MDR-AmpC) log CFU/cm(2), depending on antimicrobial treatment. Reductions obtained with sodium metasilicate were 1.3 to 1.5 log CFU/cm(2), regardless of inoculum, and reductions obtained with the five remaining antimicrobial treatments were 0.2 to 0.7 log CFU/cm(2) (depending on treatment). Findings of this study should be useful to regulatory authorities and the meat industry as they consider Salmonella contamination on beef trimmings.

Activity of caprylic acid, carvacrol, ε-polylysine and their combinations against Salmonella in not-ready-to-eat surface-browned, frozen, breaded chicken products.

UNLABELLED: Caprylic acid (CAA), carvacrol (CAR), ε-polylysine (POL), and their combinations were evaluated for reduction of Salmonella contamination in not-ready-to-eat surface-browned, frozen, breaded chicken products. Fresh chicken breast meat pieces (5 × 5 × 5 cm) were inoculated with Salmonella (7-strain mixture; 4-5 log CFU/g) and mixed with distilled water (control) or with CAA, CAR, and POL as single or combination treatments of 2 or 3 ingredients. Sodium chloride (1.2%) and sodium tripolyphosphate (0.3%) were added to all formulations, followed by grinding of the mixtures and forming into 9 × 5 × 3 cm portions. Sample surfaces were brushed with egg whites, coated with breadcrumbs, surface-browned in an oven (208 °C, 15 min), packaged, and stored at -20 °C (7 d). Total reductions of inoculated Salmonella in untreated (control) surface-browned, breaded products after frozen storage were 0.8 to 1.4 log CFU/g. In comparison, single treatments of CAA (0.25% to 1.0%), CAR (0.3% to 0.5%), and POL (0.125% to 1.0%) reduced counts by 2.9 to at least 4.5, 3.4 to at least 4.4, and 1.4 to 2.3 log CFU/g, respectively, depending on concentration. Pathogen counts of products treated with 2- or 3-ingredient combination treatments (0.03125% to 0.25% CAA, 0.0375% to 0.3% CAR, and/or 0.5% POL) were 0.4 to at least 3.3 log CFU/g lower (depending on treatment) than those of the untreated controls. The antimicrobial activity of 2-ingredient combinations comprised of 0.125% CAA, 0.15% CAR, or 0.5% POL was enhanced (P < 0.05) when applied as a 3-ingredient combination (that is, 0.125% CAA + 0.15% CAR + 0.5% POL). These data may be useful for the selection of antimicrobial treatments to reduce Salmonella contamination in not-ready-to-eat processed chicken products. PRACTICAL APPLICATION: Findings from the study may be useful for the selection of suitable antimicrobials, concentrations, and combinations to reduce Salmonella contamination in not-ready-to-eat surface-browned, frozen, breaded chicken products.

Antimicrobials for reduction of Salmonella contamination in uncooked, surface-browned breaded chicken products.

Surface-browned but uncooked frozen breaded chicken products have been associated with salmonellosis outbreaks due to inadequate or no cooking of the products before consumption. This study was conducted to evaluate the effect of three antimicrobials against Salmonella during manufacture of a surface-browned, uncooked frozen breaded chicken meat product. Fresh chicken breast meat portions (5 by 5 by 5 cm) were inoculated (4 to 5 log CFU/g) with Salmonella and mixed with caprylic acid (CAA; 0.5 and 1.0%), carvacrol (CAR; 0.3 and 0.5%), ε-polylysine (POL; 0.125 and 0.25%), or distilled water (control). Sodium chloride (1.2%) and sodium tripolyphosphate (0.3%) were added to all treatments, and the mixtures were ground (5% total moisture enhancement level) and formed into portions (9 by 5 by 3 cm). The products were breaded and surface browned by baking in an oven (208°C for 15 min) or deep frying in vegetable oil (190°C for 15 s), packaged in polyethylene bags, and stored at -20°C for 7 days. Total reductions of inoculated Salmonella in untreated control oven- or fryer-browned products after frozen storage were 1.2 and 0.8 log CFU/g, respectively. In comparison, treatment with CAA, CAR, or POL reduced initial pathogen counts by 3.3 to >4.5, 4.1 to >4.7, and 1.1 to 1.6 log CFU/g, respectively, regardless of the antimicrobial concentration and browning method. Treatment with 1.0% CAA (oven browned) or 0.5% CAR (oven or fryer browned) reduced Salmonella to nondetectable levels (<0.3 log CFU/g) in stored frozen products. These data may be useful for development of suitable antimicrobial treatments to reduce the risk of Salmonella contamination in surface-browned, uncooked frozen breaded chicken products.

The effect of heat shrink treatment and storage temperature on the time of onset of "blown pack" spoilage.

This study determined the effects of (a) the short "heat shrink" treatment frequently applied to vacuum packed meats within normal commercial production, and (b) chill holding storage temperature, on the subsequent time to onset (TTO) of "blown pack" spoilage (BPS). Beef or lamb steaks were inoculated with 10³ CFU/cm² of spore suspensions of five gas producing clostridia, vacuum packed (VP) and treated as follows: no heat, 50°C/15 s, 70°C/10 s or 90°C/3 s. Samples were stored at -1.5, 1 or 4°C and examined daily to determine TTO of BPS. For each strain, pack treatment and storage temperature had significant (P<0.05 and P<0.001 respectively) effects on TTO of BPS, i.e. 90°C/3 s<70°C/10 s<50°C/15 s≤"no heat", and 4°C<1°C<-1.5°C. The study suggested that the meat industry could reduce the risks of BPS by avoiding higher temperature (90°C/3 s or 70°C/10 s) heat shrinking, and by storing VP meats at lower temperatures (e.g. -1.5°C).