Unintended consequences: Assessing thermo-mechanical changes in vinyl nitrile foam due to micro-computed X-ray tomographic imaging.

Micro-computed X-ray tomography (µCT) is a volumetric imaging tool used to quantify the internal structure of materials. µCT imaging with mechanical testing (in situ µCT) helps visualize strain-induced structural changes and develop structure-property relationships. However, the effects on thermophysical properties of radiation exposure during in situ µCT imaging are seldom addressed, despite potential radiation sensitivity in elastomers. This work quantifies the radiation dosage effect on thermo-, chemical-, and mechanical-properties for a vinyl nitrile-based foam. Material properties were measured after (0, 1, 2, and 3) days at (8.1 ± 0.9) kGy/d. Morphological characteristics were investigated via scanning electron microscopy. Thermal transitions were assessed using differential scanning calorimetry. Viscoelasticity was measured with dynamic mechanical analysis over a range from -30 °C to 60 °C. Higher dose lead to stiffening and increased dissipation. Chemical structure was assessed with Fourier transform infrared spectroscopy and energy-dispersive X-ray spectroscopy. Soxhlet extraction was used to measure gel content. In summary, substantial changes occur in thermophysical properties, which may confound structure-property measurements. However, this also provides a modification pathway. Quantitation and calibration of the properties changes informed a finite element user material for material designers to explore tunablity and design optimization for impact protection engineers.

A materials data framework and dataset for elastomeric foam impact mitigating materials.

The availability of materials data for impact-mitigating materials has lagged behind applications-based data. For example, data describing on-field helmeted impacts are available, whereas material behaviors for the constituent impact-mitigating materials used in helmet designs lack open datasets. Here, we describe a new FAIR (findable, accessible, interoperable, reusable) data framework with structural and mechanical response data for one example elastic impact protection foam. The continuum-scale behavior of foams emerges from the interplay of polymer properties, internal gas, and geometric structure. This behavior is rate and temperature sensitive, therefore, describing structure-property characteristics requires data collected across several types of instruments. Data included are from structure imaging via micro-computed tomography, finite deformation mechanical measurements from universal test systems with full-field displacement and strain, and visco-thermo-elastic properties from dynamic mechanical analysis. These data facilitate modeling and design efforts in foam mechanics, e.g., homogenization, direct numerical simulation, or phenomenological fitting. The data framework is implemented using data services and software from the Materials Data Facility of the Center for Hierarchical Materials Design.