Synergistic photogeneration of nitric oxide and singlet oxygen by nanofiber membranes via blue and/or red-light irradiation: Strong antibacterial action.

New functionalities were added to biocompatible polycaprolactone nanofiber materials through the co-encapsulation of chlorin e6 trimethyl ester (Ce6) photogenerating singlet oxygen and absorbing light both in the blue and red regions, and using 4-(N-(aminopropyl)-3-(trifluoromethyl)-4-nitrobenzenamine)-7-nitrobenzofurazan, NO-photodonor (NOP), absorbing light in the blue region of visible light. Time-resolved and steady-state luminescence, as well as absorption spectroscopy, were used to monitor both photoactive compounds. The nanofiber material exhibited photogeneration of antibacterial species, specifically nitric oxide and singlet oxygen, upon visible light excitation. This process resulted in the efficient photodynamic inactivation of E. coli not only close to nanofiber material surfaces due to short-lived singlet oxygen, but even at longer distances due to diffusion of longer-lived nitric oxide. Interestingly, nitric oxide was also formed by processes involving photosensitization of Ce6 during irradiation by red light. This is promising for numerous applications, especially in the biomedical field, where strictly local photogeneration of NO and its therapeutic benefits can be applied using excitation in the "human body phototherapeutic window" (600-850 nm). Generally, due to the high permeability of red light, the photogeneration of NO can be achieved in any aqueous environment where direct excitation of NOP to its absorbance in the blue region is limited.

Light-induced antifungal activity of nanoparticles with an encapsulated porphyrin photosensitizer.

The strong antifungal effect of sulfonated polystyrene nanoparticles (NPs) with an encapsulated tetraphenylporphyrin (TPP) photosensitizer is reported here. TPP is activated by visible light, resulting in the generation of singlet oxygen. Its antifungal action is potentiated in the presence of potassium iodide, yielding I2/I3⁻, another antifungal species. The NPs exhibit no dark toxicity, but a broad spectrum of antifungal photodynamic effects. The efficiency of this rapid killing (on the order of minutes) depends on the concentration of TPP NPs, potassium iodide, yeast species and temperature. A strong antifungal activity of TPP NPs is demonstrated on eleven pathogenic and opportunistic pathogenic yeast species (six Candida species and other yeast species, including melanized Hortaea werneckii). The composition and architecture of yeast cell envelope structures clearly influence the efficacy of photodynamic therapy. Candida krusei is the most sensitive to photodynamic therapy. Despite expectations, melanin does not provide Hortaea cells with marked resistance compared to white yeast species. The kinetics of the interaction of NPs with yeast cells is also described. This study may inspire and promote the fabrication of a new type of antiseptic for various skin injuries in clinical medicine.

Biological Evaluation of Photodynamic Effect Mediated by Nanoparticles with Embedded Porphyrin Photosensitizer.

Clinically approved photodynamic therapy (PDT) is a minimally invasive treatment procedure that uses three key components: photosensitization, a light source, and tissue oxygen. However, the photodynamic effect is limited by both the photophysical properties of photosensitizers as well as their low selectivity, leading to damage to adjacent normal tissue and/or inadequate biodistribution. Nanoparticles (NPs) represent a new option for PDT that can overcome most of the limitations of conventional photosensitizers and can also promote photosensitizer accumulation in target cells through enhanced permeation and retention effects. In this in vitro study, the photodynamic effect of TPP photosensitizers embedded in polystyrene nanoparticles was observed on the non-tumor NIH3T3 cell line and HeLa and G361 tumor cell lines. The efficacy was evaluated by viability assay, while reactive oxygen species production, changes in membrane mitochondrial potential, and morphological changes before and after treatment were imaged by atomic force microscopy. The tested nanoparticles with embedded TPP were found to become cytotoxic only after activation by blue light (414 nm) due to the production of reactive oxygen species. The photodynamic effect observed in this evaluation was significantly higher in both tumor lines than the effect observed in the non-tumor line, and the resulting phototoxicity depended on the concentration of photosensitizer and irradiation time.

Antibacterial Nanoparticles with Natural Photosensitizers Extracted from Spinach Leaves.

We prepared antibacterial polystyrene nanoparticles (NPs) with natural photosensitizers from chlorophyll (Chl) extract via a simple nanoprecipitation method using the same solvent for dissolution of the polystyrene matrix and extraction of Chls from spinach leaves. A high photo-oxidation and antibacterial effect was demonstrated on Escherichia coli and was based on the photogeneration of singlet oxygen O2(1Δg), which was directly monitored by NIR luminescence measurements and indirectly verified using a chemical trap. The photoactivity of NPs was triggered by visible light, with enhanced red absorption by Chls. To reduce the quenching effect of carotenoids (ß-carotene, lutein, etc.) in the Chl extract, diluted and/or preirradiated samples, in which the photo-oxidized carotenoids lose their quenching effect, were used for preparation of the NPs. For enhanced photo-oxidation and antibacterial effects, a sulfonated polystyrene matrix was used for preparation of a stable dispersion of sulfonated NPs, with the quenching effect of carotenoids being suppressed.

Magnetically Separable Photoactive Nanofiber Membranes for Photocatalytic and Antibacterial Applications.

We have prepared photoactive multifunctional nanofiber membranes via the simple electrospinning method. The antibacterial and photocatalytic properties of these materials are based on the generation of singlet oxygen formed by processes photosensitized by the tetraphenylporphyrin encapsulated in the nanofibers. The addition of magnetic features in the form of magnetic maghemite (γ-Fe2O3) nanoparticles stabilized by polyethylenimine enables additional functionalities, namely, the postirradiation formation of hydrogen peroxide and improved photothermal properties. This hybrid material allows for remote manipulation by a magnetic field, even in hazardous and/or highly microbial contaminant environments.

Photodynamic effect of TPP encapsulated in polystyrene nanoparticles toward multi-resistant pathogenic bacterial strains: AFM evaluation.

Photodynamic inactivation (PDI) is a promising approach for the efficient killing of pathogenic microbes. In this study, the photodynamic effect of sulfonated polystyrene nanoparticles with encapsulated hydrophobic 5,10,15,20-tetraphenylporphyrin (TPP-NP) photosensitizers on Gram-positive (including multi-resistant) and Gram-negative bacterial strains was investigated. The cell viability was determined by the colony forming unit method. The results showed no dark cytotoxicity but high phototoxicity within the tested conditions. Gram-positive bacteria were more sensitive to TPP-NPs than Gram-negative bacteria. Atomic force microscopy was used to detect changes in the morphological properties of bacteria before and after the PDI treatment.

Effects of zinc porphyrin and zinc phthalocyanine derivatives in photodynamic anticancer therapy under different partial pressures of oxygen in vitro.

Photodynamic therapy (PDT) is gradually becoming an alternative method in the treatment of several diseases. Here, we investigated the role of oxygen in photodynamically treated cervical cancer cells (HeLa). The effect of PDT on HeLa cells was assessed by exposing cultured cells to disulphonated zinc phthalocyanine (ZnPcS2) and tetrasulphonated zinc tetraphenylporphyrin (ZnTPPS4). Fluorescence microscopy revealed their different localizations within the cells. ZnTPPS4 seems to be mostly limited to the cytosol and lysosomes, whereas ZnPcS2 is most likely predominantly attached to membrane structures, including plasmalemma and the mitochondrial membrane. Phototoxicity assays of PDT-treated cells carried out under different partial pressures of oxygen showed dose-dependent responses. Interestingly, ZnPcS2 was also photodynamically effective at a minimal level of oxygen, under a nitrogen atmosphere. On the other hand, hyperbaric oxygenation did not lead to a higher PDT efficiency of either photosensitizer. Although both photosensitizers can induce a significant drop in mitochondrial membrane potential, ZnPcS2 has a markedly higher effect on mitochondrial respiration that was completely blocked after two short light cycles. In conclusion, our observations suggest that PDT can be effective even in hypoxic conditions if a suitable sensitizer is chosen, such as ZnPcS2, which can inhibit mitochondrial respiration.

Multifunctional Photosensitizing and Biotinylated Polystyrene Nanofiber Membranes/Composites for Binding of Biologically Active Compounds.

A three-step postprocessing functionalization of pristine electrospun polystyrene nanofiber membranes was used for the preparation of nanostructured biotinylated materials with an externally bonded porphyrin photosensitizer. Subsequently, the material was able to strongly bind biologically active streptavidin derivatives while keeping its photosensitizing and antibacterial properties due to the generation of singlet oxygen under the exclusive control of visible light. The resulting multifunctional materials functionalized by a streptavidin-horseradish peroxidase conjugate as a model bioactive compound preserved its enzymatic activity even in the presence of a porphyrin photosensitizer with some quenching effect on the activity of the photosensitizer. Prolonged kinetics of both singlet oxygen luminescence and singlet oxygen-sensitized delayed fluorescence (SODF) were found after irradiation by visible light. The above results reflected less effective quenching of the porphyrin photosensitizer triplet state by ground state oxygen and indicated hindered oxygen transport (diffusion) due to surface functionalization. We found that SODF could be used as a valuable tool for optimizing photosensitizing efficiency as well as a tool for confirming surface functionalization. Full photosensitizing and enzyme activity could be achieved by a space separation of photosensitizers and enzyme/biomolecules in the nanofiber composites consisting of two layers. The upper layer contained a photosensitizer that generated antibacterial singlet oxygen upon irradiation by light, and the bottom layer retained enzymatic activity for biochemical reactions.

Polystyrene and Poly(ethylene glycol)-b-Poly(ε-caprolactone) Nanoparticles with Porphyrins: Structure, Size, and Photooxidation Properties.

The transport of a photosensitizer to target biological structures followed by the release of singlet oxygen is a critical step in photodynamic therapy. We compared the (photo)physical properties of polystyrene nanoparticles (TPP@PS) of different sizes and self-assembled poly(ethylene glycol)-b-poly(ε-caprolactone) core/shell nanoparticles (TPP@PEG-PCL) with different lengths of copolymer blocks, both suitable for the transport of the tetraphenylporphyrin (TPP) photosensitizer. The singlet oxygen was formed inside both nanoparticles after irradiation with visible light. Its kinetics was controlled by the size of TPP@PS; its lifetime (τΔ) increased with increasing nanoparticle size (from 6.5 to 16 µs) because of hindered diffusion into the external aqueous environment, where it was quickly deactivated. Accordingly, the prolongation of the singlet oxygen-sensitized delayed fluorescence kinetics was found for TPP@PS of high size. The TPP@PEG-PCL self-assemblies allowed for enhanced oxygen diffusion, and the estimated low values of τΔ ≈ 3.7 µs were independent of the size of building blocks. The delayed fluorescence in oxygen-free conditions originating from triplet-triplet annihilation indicated a high mobility of TPP in the PCL core in comparison with fixed molecules in the PS matrix. Photooxidation of uric acid revealed the highest efficacy for TPP@PS of small sizes, whereas the largest TPP@PS exhibited the lowest activity, and the efficacy of TPP@PEG-PCL remained independent of the sizes of the building blocks.

Straightforward Synthesis and Properties of Highly Fluorescent [5]- and [7]-Helical Dispiroindeno[2,1-c]fluorenes.

This work presents a general approach for synthesis of substituted [5]-helical dispiroindeno[2,1-c]fluorenes based on Rh-catalyzed intramolecular cyclotrimerization of triynes. This approach was further extended for the first synthesis of configurationally stable [7]-helical dispiroindeno[2,1-c]fluorenes. A series of variously substituted derivatives was prepared and their photophysical and electrochemical properties were evaluated. Their fluorescence emission maxima were in the region of 351-428 nm and quantum yields up to 88 % are the highest measured among the full-carbon helical compounds.

Optimization of the photodynamic inactivation of prions by a phthalocyanine photosensitizer: The crucial involvement of singlet oxygen.

Prion disorders are fatal neurodegenerative diseases caused by the autocatalytic conversion of a natively occurring prion protein (PrPC ) into its misfolded infectious form (PrPTSE ). The proven resistance of PrPTSE to common disinfection procedures increases the risk of prion transmission in medical settings. Herein, we present the effective photodynamic inactivation (PDI) of prions by disulfonated hydroxyaluminum phthalocyanine (AlPcOH(SO3 )2 ) utilizing two custom-built red light sources. The treatment eliminates PrPTSE signal in infectious mouse brain homogenate with efficiency that depends on light intensity but has a low effect on the overall protein content. Importantly, singlet oxygen (O2 (1 Δg )) is the only species significantly photogenerated by AlPcOH(SO3 )2 , and it is responsible for the PDI of prions. More intensive light conditions show not only higher O2 (1 Δg ) production but also decreases in AlPcOH(SO3 )2 photostability. Our findings suggest that PDI by AlPcOH(SO3 )2 -generated O2 (1 Δg ) represents a promising approach for prion inactivation that may be useful in future decontamination strategies for delicate medical tools.

The effect of iodide and temperature on enhancing antibacterial properties of nanoparticles with an encapsulated photosensitizer.

Aqueous dispersions of sulfonated polystyrene nanoparticles (average diameter: 30 ± 14 nm) with encapsulated 5,10,15,20-tetraphenylporphyrin (TPP) are promising candidates for antibacterial treatments due to the photogeneration of cytotoxic singlet oxygen species O2(1Δg) under physiological conditions using visible light. The antibacterial effect on gram-negative Escherichia coli was significantly enhanced after the addition of nontoxic potassium iodide (0.001-0.01 M) because photogenerated O2(1Δg) oxidized iodide to I2/I3-, which is another antibacterial species. The improved antibacterial properties were predicted using luminescence measurements of O2(1Δg), transient absorption of TPP triplets and singlet oxygen-sensitized delayed fluorescence (SODF). In contrast to a solution of free photosensitizers, the aqueous dispersion of photoactive nanoparticles did not exhibit any quenching of the excited states after the addition of iodide or any tendency toward aggregation and/or I3--induced photo-aggregation. We also observed a decrease in the lifetime of O2(1Δg) and a significant increase in SODF intensity at higher temperatures, due to the increased oxygen diffusion coefficient in nanoparticles and aqueous surroundings. This effect corresponds with the significantly stronger antibacterial effect of nanoparticles at physiological temperature (37 °C) in comparison with that at room temperature (25 °C).

Antibacterial nitric oxide- and singlet oxygen-releasing polystyrene nanoparticles responsive to light and temperature triggers.

Novel therapies to prevent bacterial infections are of utmost importance in biomedical research due to the emergence of multidrug-resistant strains of bacteria. Herein, we report the preparation, characterization and antibacterial evaluation of sulfonated polystyrene nanoparticles simultaneously releasing two antibacterial species, nitric oxide (NO) and singlet oxygen (O2(1Δg)), upon irradiation with visible light. The nanoparticles were prepared by simple and scalable processes from nanofiber membranes with an encapsulated NO photodonor and/or ionically entangled tetracationic porphyrin/phthalocyanine photosensitizers. The release of NO and O2(1Δg) from the polystyrene nanoparticles is controlled by light wavelength and dose, as well as by temperature, which influences the diffusion coefficient and solubility of both species in the polystyrene matrix. The concentrations of NO and O2(1Δg) were measured by amperometric and time-resolved spectroscopic techniques and by chemical analysis. Due to the efficient photogeneration of both species at physiological temperature and resultant strong antibacterial action observed on Escherichia coli, the nanoparticles are a promising material for antibacterial applications triggered/modulated by light and temperature.

Nanoparticles with Embedded Porphyrin Photosensitizers for Photooxidation Reactions and Continuous Oxygen Sensing.

We report the synthesis and characterization of sulfonated polystyrene nanoparticles (average diameter 30 ± 14 nm) with encapsulated 5,10,15,20-tetraphenylporphyrin or ionically entangled tetracationic 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrin, their photooxidation properties, and the application of singlet oxygen-sensitized delayed fluorescence (SODF) in oxygen sensing. Both types of nanoparticles effectively photogenerated singlet oxygen, O2(1Δg). The O2(1Δg) phosphorescence, transient absorption of the porphyrin triplet states, and SODF signals were monitored using time-resolved spectroscopic techniques. The SODF intensity depended on the concentration of the porphyrin photosensitizer and dissolved oxygen and on the temperature. After an initial period (a few microseconds), the kinetics of the SODF process can be approximated as a monoexponential function, and the apparent SODF lifetimes can be correlated with the oxygen concentration. The oxygen sensing based on SODF allowed measurement of the dissolved oxygen in aqueous media in the broad range of oxygen concentrations (0.2-38 mg L-1). The ability of both types of nanoparticles to photooxidize external substrates was predicted by the SODF measurements and proven by chemical tests. The relative photooxidation efficacy was highest at a low porphyrin concentration, as indicated by the highest fluorescence quantum yield (ΦF), and it corresponds with negligible inner filter and self-quenching effects. The photooxidation abilities were sensitive to the influence of temperature on the diffusion and solubility of oxygen in both polystyrene and water media and to the rate constant of the O2(1Δg) reaction with a substrate. Due to their efficient photogeneration of cytotoxic O2(1Δg) at physiological temperatures and their oxygen sensing via SODF, both types of nanoparticles are promising candidates for biomedical applications.

Synthesis of selectively 4-substituted 9,9'-spirobifluorenes and modulation of their photophysical properties.

Synthesis of selectively 4-substituted 9,9'-spirobifluorenes was accomplished by using catalytic [2 + 2 + 2]-cyclotrimerization of specifically substituted diynols with alkynes to the corresponding fluorenols. Further synthetic transformations provided the target molecules. The measurement of the photophysical properties of the prepared 4-substituted 9,9'-spirobifluorenes revealed that their emission maxima depended on the electronic properties of the substituents present in the para position: the presence of an electron accepting group strongly favored the maxima red shift toward the blue VIS region (CF3λmax = 361 nm vs. MeO λmax = 330 nm). Adding further substituents (aryl or arylethynyl moieties) on the phenyl ring in position 4 did not lead to a dramatic improvement in the emission maxima (CF3C6H4, λmax = 369 nm, CF3C6H4C[triple bond, length as m-dash]C, λmax = 370 nm), but increased their quantum yields considerably. In addition, a series of 9,9'-spirobifluorenes possessing various extended π-systems (pyrene, anthracene, etc.) were synthesized. In general, the emission maxima pattern reflected that of the parent π-systems, but they were red shifted by 10-30 nm. Finally, also a 1-[4-(9,9'-spirobifluorene-4-yl)phenyl]-2-aryl-ortho-carborane was prepared. These data thus may provide guidelines for further design of 9,9'-spirobifluorenes with tailored properties.

Antibacterial, Antiviral, and Oxygen-Sensing Nanoparticles Prepared from Electrospun Materials.

A simple nanoprecipitation method was used for preparation of stable photoactive polystyrene nanoparticles (NPs, diameter 30 ± 10 nm) from sulfonated electrospun polystyrene nanofiber membranes with encapsulated 5,10,15,20-tetraphenylporphyrin (TPP) or platinum octaethylporphyrin (Pt-OEP). The NPs prepared with TPP have strong antibacterial and antiviral properties and can be applied to the photooxidation of external substrates based on photogenerated singlet oxygen. In contrast to nanofiber membranes, which have limited photooxidation ability near the surface, NPs are able to travel toward target species/structures. NPs with Pt-OEP were used for oxygen sensing in aqueous media, and they presented strong linear responses to a broad range of oxygen concentrations. The nanofiber membranes can be applied not only as a source of NPs but also as an effective filter for their removal from solution.

Photoactivatable Nanostructured Surfaces for Biomedical Applications.

This review aims to summarize the current status of photoactivatable nanostructured film and polymeric nanofiber surfaces used in biomedical applications with emphasis on their photoantimicrobial activity, oxygen-sensing in biological media, light-triggered release of drugs, and physical or structural transformations. Many light-responsive functions have been considered as novel ways to alter surfaces, i.e., in terms of their reactivities and structures. We describe the design of surfaces, nano/micro-fabrication, the properties affected by light, and the application principles. Additionally, we compare the various approaches reported in the literature.

Graphene oxide nanohybrid that photoreleases nitric oxide.

We report herein a photoresponsive nanoplatform that delivers nitric oxide (NO) on demand, achieved by the covalent functionalization of graphene oxide (GO) with an amino-terminated nitric oxide (NO) photodonor (NOP1). The resulting GO-NOP1 hybrid nanomaterial is dispersible in water, is very stable in the dark and has been thoroughly characterized by SEM, TEM, AFM, XRD, FTIR and UV-Vis absorption spectroscopy. Photolysis experiments demonstrate that the photodecomposition of the NO photoreleaser integrated into the GO scaffold occurs with an efficiency similar to that observed for a free model compound, ruling out any significant quenching effect (i.e. photoinduced energy/electron transfer) and accounting for the excellent preservation of its photochemical properties upon grafting. A combination of direct amperometric detection and indirect measurements based on a fluorometric assay prove that the remote-controlled release of NO from the GO-NOP1 nanoplatform is exclusively regulated by visible light stimuli.

Polystyrene Nanofiber Materials for Visible-Light-Driven Dual Antibacterial Action via Simultaneous Photogeneration of NO and O2((1)Δg).

This contribution reports on the preparation, characterization, and biological evaluation of electrospun polystyrene nanofiber materials engineered with a covalently grafted NO photodonor and ionically entangled tetracationic porphyrin and phthalocyanine photosensitizers. These photofunctional materials exhibit an effective and simultaneous photogeneration of two antibacterial species such as nitric oxide (NO) and singlet oxygen, O2((1)Δg) under illumination with visible light, as demonstrated by their direct detection using amperometric and time-resolved spectroscopic techniques. Dual-mode photoantibacterial action is demonstrated by antibacterial tests carried out on Escherichia coli.

A [2+2+2]-Cyclotrimerization Approach to Selectively Substituted Fluorenes and Fluorenols, and Their Conversion to 9,9'-Spirobifluorenes.

Synthesis of selectively substituted fluorenes and fluorenols was achieved by using catalytic [2+2+2]cyclotrimerization. Various starting diynes were reacted with different alkynes in the presence of a catalytic amount of Wilkinson's catalyst (RhCl(PPh3)3) providing the compounds possessing the fluorene scaffold in good isolated yields. A set of four regioselectively substituted fluorenols was converted to the corresponding 9,9'-spirobifluorenes and their spectral characteristics were measured.