Analysis and improvement of sports industry development and public health strategy under low-carbon economic structure.

With the continuous development of society, various industries are rising and developing rapidly. Against this background, the energy crisis has come quietly. Therefore, to improve the quality of life of residents and promote the comprehensive and sustainable development of society, it is essential to enhance the development of the sports industry and formulate public health strategies under the background of a low carbon economy (LCE). Based on this, to promote the low-carbon development of the sports industry and optimize the formulation of social public health strategies, firstly, this paper introduces the low-carbon economic structure and its role in society. Then, it discusses the development of the sports industry and the necessity of perfecting public health strategy. Finally, based on LCE's development background, the sports industry's development situation in the whole society and M enterprises is analyzed, and suggestions are put forward to improve the public health strategy. The research results show that the current development prospect of the sports industry is extensive, and the added value of the sports industry will be 1,124.81 billion yuan in 2020, up by 11.6% year-on-year, accounting for 1.14% of Gross Domestic Product (GDP). Although industrial development declined in 2021, the added value of the sports industry accounts for an increasing proportion of GDP yearly, which shows that the sports industry is playing an increasingly important role in economic growth. And through the analysis of the development of M enterprise sports industry as a whole and in different directions, this paper shows that enterprises should reasonably control the development of various industries to provide impetus for the overall development of enterprises. The innovation of this paper lies in the innovative use of the sports industry as the primary research object, and its development under LCE is studied. This paper not only supports the sustainable development of sports industry in the future, but also contributes to improving public health strategy.

The effects of Sodium-glucose cotransporter 2 inhibitors on adipose tissue in patients with type 2 diabetes: A meta-analysis of randomized controlled trials.

Purpose: To systematically evaluate the effect of Sodium-glucose cotransporter 2 (SGLT2) inhibitors on adipose tissue in patients with type 2 diabetes. Methods: We searched PubMed, Cochrane Library, EMBASE, and Web of science databases for literature pertaining to Randomized controlled trials (RCTs) of SGLT2 inhibitors in treating type 2 diabetes patients. The retrieval time was from the date of establishment of the databases to September 1, 2022. Meta-analysis was performed using RevMan5.4 software. Results: Totally 551 patients were included in 10 articles. Meta-analysis results showed that compared with the control group, the visceral adipose tissue (WMD = -16.29 cm2, 95% CI: -25.07 ~ -7.50, P<0.00001), subcutaneous adipose tissue (WMD = -19.34 cm2, 95% CI: -36.27 ~ -2.41, P<0.00001), body weight (WMD = -2.36 kg, 95% CI: -2.89 ~ -1.83, P<0.00001) and triglyceride (WMD = -24.41 mg/dl, 95% CI: -45.79 ~ -3.03, P = 0.03) of the trial group significantly reduced. Conclusion: SGLT2 inhibitors cause significant reductions in visceral adipose tissue, subcutaneous adipose tissue, body weight and triglycerides in type 2 diabetes patients, which may be attributed to the protective effect of the inhibitors on cardiovascular system.

A Mild Method for Encapsulation of Citral in Monodispersed Alginate Microcapsules.

Citral is a typical UV-irritation and acid-sensitive active and here we develop a mild method for the encapsulation of citral in calcium alginate microcapsules, in which UV irritation or acetic acid is avoided. Monodispersed oil-in-water-in-oil (O/W/O) emulsions are generated in a capillary microfluidic device as precursors. The middle aqueous phase of O/W/O emulsions contains sodium alginate, calcium-ethylenediaminetetraacetic acid (EDTA-Ca) complex as the calcium source, and D-(+)-Gluconic acid δ-lactone (GDL) as the acidifier. Hydrolysis of GDL will decrease the pH value of the middle aqueous solution, which will trigger the calcium ions released from the EDTA-Ca complex to cross-link with alginate molecules. After the gelling process, the O/W/O emulsions will convert to alginate microcapsules with a uniform structure and monodispersed size. The preparation conditions for alginate microcapsules are optimized, including the constituent concentration in the middle aqueous phase of O/W/O emulsions and the mixing manner of GDL with the alginate-contained aqueous solution. Citral-containing alginate microcapsules are successfully prepared by this mild method and the sustained-release characteristic of citral from alginate microcapsules is analyzed. Furthermore, a typical application of citral-containing alginate microcapsules to delay the oxidation of oil is also demonstrated. The mild gelling method provides us a chance to encapsulate sensitive hydrophobic actives with alginate, which takes many potential applications in pharmaceutical, food, and cosmetic areas.

Current Situation and Strategy Formulation of College Sports Psychology Teaching Following Adaptive Learning and Deep Learning Under Information Education.

This study aims to explore the current situation and strategy formulation of sports psychology teaching in colleges and universities following adaptive learning and deep learning under information education. The informatization in physical education, teaching methods, and teaching processes make psychological education more scientific and efficient. First, the relevant theories of adaptive learning and deep learning are introduced, and an adaptive learning analysis model is implemented. Second, based on the deep learning automatic encoder, college students' sports psychology is investigated and the test results are predicted. Finally, the current situation and development strategy of physical education in colleges and universities are analyzed. The results show that when the learning rate is 1, 0.1, and 0.01, there is no significant change in the analysis factors of recall, ndcg, item_coverage, and sps. When the learning rate is 1, their analysis factors change obviously, and it is calculated that the optimal learning rate of the model is 1. And the difficulty of the recommended test questions by using the sports psychology teaching method based on adaptive learning and deep learning is relatively stable. The test questions include various language points of sports psychology. Compared with others methods, adaptive learning and deep learning can provide comprehensive test questions for sports psychology teaching. This study provides technical support for the reform of sports psychology teaching in colleges and universities and contributes to optimizing the information-based teaching mode.

An Inductive Sensor for Two-Dimensional Displacement Measurement.

The simultaneous and independent measurements of two-dimensional (2D) displacements are significant for 2D positioning. Here a planar inductive sensor which is based on the principle of electromagnetic induction is proposed. The sensor is composed of a primary coil and a secondary coil. The primary coil consists of an array of planar spiral coils which are arranged as an m × n matrix. The primary coil is supplied with 4 kHz alternating current to generate an array of pulsating magnetic field. The secondary coil contains four spiral coils which are arranged as a 2 × 2 matrix. Thereby, four roads of modulated signals whose amplitudes vary with displacements of the secondary coil along x- and y-axis are induced. An algorithm based on the Coordinate Rotation Digital Computer algorithm is introduced to resolve the planar displacements. The structure and working principle of the sensor are proposed firstly. Then, the finite element analysis of the electromagnetic model and the numerical simulation of the algorithm are given. An experiment has been performed on a sensor prototype and the results show that the proposed scheme is feasible. Measurement error analysis of the sensor has been pursued at the end of the paper.

Controllable preparation of monodisperse alginate microcapsules with oil cores.

Here we report a novel strategy for controllable preparation monodisperse alginate microcapsules with oil cores, where the thickness of the alginate shells, as well as the number and diversity of the oil cores can be tailored precisely. Monodisperse oil-in-water-in-oil (O/W/O) emulsions are generated in a microfluidic device as templates, which contain alginate molecules and a water-soluble calcium complex in the middle aqueous phase. Alginate microcapsules are produced by gelling O/W/O emulsions in oil solution with acetic acid, where the pH decreasing will trigger the calcium ions being released from calcium complex and cross-linking with alginate molecules. Increasing the alginate molecule concentration in emulsion templates affects little on the thickness of the microcapsules but improves their stability in DI water. The strength of alginate microcapsules can be reinforced by post cross-linking in calcium chloride, polyetherimide, or chitosan solution. Typical payloads, such as thyme essential oil, lavender essential oil and W/O emulsions are encapsulated in alginate microcapsules successfully. Furthermore, tailoring the thickness of the alginate shells, as well as the number and the diversity of the oil cores precisely by manipulation the emulsion templates with microfluidics is also demonstrated. The proposed method shows excellent controllability in designing alginate microcapsules with oil cores.

Trojan-Horse-Like Stimuli-Responsive Microcapsules.

Multicompartment microcapsules, with each compartment protected by a distinct stimuli-responsive shell for versatile controlled release, are highly desired for developing new-generation microcarriers. Although many multicompartmental microcapsules have been created, most cannot combine different release styles to achieve flexible programmed sequential release. Here, one-step template synthesis of controllable Trojan-horse-like stimuli-responsive microcapsules is reported with capsule-in-capsule structures from microfluidic quadruple emulsions for diverse programmed sequential release. The nested inner and outer capsule compartments can separately encapsulate different contents, while their two stimuli-responsive hydrogel shells can individually control the content release from each capsule compartment for versatile sequential release. This is demonstrated by using three types of Trojan-horse-like stimuli-responsive microcapsules, with different combinations of release styles for flexible programmed sequential release. The proposed microcapsules provide novel advanced candidates for developing new-generation microcarriers for diverse, efficient applications.

ICA of full complex-valued fMRI data using phase information of spatial maps.

BACKGROUND: ICA of complex-valued fMRI data is challenging because of the ambiguous and noisy nature of the phase. A typical solution is to remove noisy regions from fMRI data prior to ICA. However, it may be more optimal to carry out ICA of full complex-valued fMRI data, since any filtering or voxel-based processing may disrupt information that can be useful to ICA. NEW METHOD: We enable ICA of the full complex-valued fMRI data by utilizing phase information of estimated spatial maps (SMs). The SM phases are first adjusted to properly represent spatial phase changes of all voxels based on estimated time courses (TCs), and then these are used to segment the voxels into BOLD-related and unwanted voxels based on a criterion of TC real-part power maximization. Single-subject and group phase masks are finally constructed to remove the unwanted voxels from the individual and group SM estimates. RESULTS: Our method efficiently estimated not only the task-related component but also the non-task-related component DMN. COMPARISON WITH EXISTING METHOD(S): Our method extracted 139-331% more contiguous and reasonable activations than magnitude-only infomax for the task-related component and DMN at |Z|>2.5, and detected more BOLD-related voxels, but eliminated more unwanted voxels than ICA of complex-valued fMRI data with pre-ICA de-noising. Our TC-based phase de-ambiguity exhibited higher accuracy and robustness than the SM-based method. CONCLUSIONS: The TC-based phase de-ambiguity is essential to prepare the SM phases. The SM phases provide a new post-ICA index for reliably identifying and suppressing the unwanted voxels.

Monodisperse and fast-responsive poly(N-isopropylacrylamide) microgels with open-celled porous structure.

A simple and efficient method is developed to fabricate monodisperse and fast-responsive poly(N-isopropylacrylamide) (PNIPAM) microgels with open-celled porous structure. First, numerous fine oil droplets are fabricated by homogeneous emulsification method and are then evenly dispersed inside monodisperse PNIPAM microgels as porogens via the combination of microfluidic emulsification and UV-initiated polymerization methods. Subsequently, the embedded fine oil droplets inside the PNIPAM microgels are squeezed out upon stimuli-induced rapid volume shrinkage of the microgels; as a result, a spongelike open-celled porous structure is formed inside the PNIPAM microgels. The open-celled porous structure provides numerous interconnected free channels for the water transferring convectively inward or outward during the volume phase transition process of PNIPAM microgels; therefore, the response rates of the PNIPAM microgels with open-celled porous structure are much faster than that of the normal ones in both thermo-responsive shrinking and swelling processes. Because of the fast-responsive characteristics, the microgels with open-celled porous structure will provide ever better performances in their myriad applications, such as microsensors, microactuators, microvalves, and so on.

Simple and cheap microfluidic devices for the preparation of monodisperse emulsions.

Droplet microfluidics, which can generate monodisperse droplets or bubbles in unlimited numbers, at high speed and with complex structures, have been extensively investigated in chemical and biological fields. However, most current methods for fabricating microfluidic devices, such as glass etching, soft lithography in polydimethylsiloxane (PDMS) or assembly of glass capillaries, are usually either expensive or complicated. Here we report the fabrication of simple and cheap microfluidic devices based on patterned coverslips and microscope glass slides. The advantages of our approach for fabricating microfluidic devices lie in a simple process, inexpensive processing equipment and economical laboratory supplies. The fabricated microfluidic devices feature a flexible design of microchannels, easy spatial patterning of surface wettability, and good chemical compatibility and optical properties. We demonstrate their utilities for generation of monodisperse single and double emulsions with highly controllable flexibility.

Electro-acupuncture at 'Neiguan' (PC6) attenuates liver injury in endotoxaemic rats.

BACKGROUND: Intravenous injection of lipopolysaccharide (LPS) stimulates macrophages to release proinflammatory cytokines and nitric oxide (NO). This results in hypotension, vascular hyporeactivity and multiple organ failure (eg, liver injury) in rats. In rats with endotoxin shock, electro-acupuncture (EA) of 'Neiguan' (PC6) retrieved blood pressure and reduced plasma concentrations of NO. The authors evaluated whether EA at PC6 could alleviate the development of liver injury and dysfunction in endotoxic rats. METHODS: A total of 28 male adult Wistar rats were included in this study. Rats received intravenous LPS (10 mg/kg for 4 h) or saline for 4 h followed by EA at PC6 acupuncture point. RESULTS: Elevated biochemical parameters of liver injury and marked infiltration of neutrophils into liver tissues caused by LPS were significantly attenuated by EA. However, hypotension, tachycardia and raised production of plasma NO were not suppressed by EA at PC6. CONCLUSIONS: These results indicate that EA at PC6 should be further investigated as a possible adjuvant therapy for endotoxin-induced liver dysfunction. Its mechanism of action needs further investigation.

Novel cationic pH-responsive poly(N,N-dimethylaminoethyl methacrylate) microcapsules prepared by a microfluidic technique.

Novel monodisperse cationic pH-responsive microcapsules are successfully prepared using oil-in-water-in-oil double emulsions as templates by a microfluidic technique in this study. With the use of a double photo-initiation system and the adjustment of pH value of the monomer solution, cross-linked poly(N,N-dimethylaminoethyl methacrylate) (PDM) microcapsules with good sphericity and monodispersity can be effectively fabricated. The obtained microcapsule membranes swell at low pH due to the protonation of N(CH(3))(2) groups in the cross-linked PDM networks. The effects of various preparation parameters, such as pH of the aqueous monomer fluid, concentration of cross-linker, concentration of monomer N,N-dimethylaminoethyl methacrylate (DM) and addition of copolymeric monomer acrylamide (AAm), on the pH-responsive swelling characteristics of PDM microcapsules are systematically studied. The results show that, when the PDM microcapsules are prepared at high pH and with low cross-linking density and low DM monomer concentration, they exhibit high pH-responsive swelling ratios. The addition of AAm in the preparation decreases the swelling ratios of PDM microcapsules. The external temperature has hardly any influence on the swelling ratios of PDM microcapsules when the external pH is less than 7.4. The prepared PDM microcapsules with both biocompatibility and cationic pH-responsive properties are of great potential as drug delivery carriers for tumor therapy. Moreover, the fabrication methodology and results in this study provide valuable guidance for preparation of core-shell microcapsules via free radical polymerization based on synergistic effects of interfacial initiation and initiation in a confined space.

Application of non-destructive impedance-based monitoring technique for cyclic fatigue evaluation of endodontic nickel-titanium rotary instruments.

This study investigates the application of non-destructive testing based on the impedance theory in the cyclic fatigue evaluation of endodontic Ni-Ti rotary instruments. Fifty Ni-Ti ProTaper instruments were divided into five groups (n=10 in Groups A to E). Groups A to D were subjected to cyclic fatigue within an artificial canal (Group E was the control group). The mean value of the total life limit (TLL), defined as the instrument being rotated until fracture occurred was found to be 104 s in Group A. Each rotary instrument in Groups B, C and D were rotated until the tested instruments reached 80% (84 s), 60% (62 s) and 40% (42 s) of the TLL. After fatigue testing, each rotary instrument was mounted onto a custom-developed non-destructive testing device to give the tip of the instrument a progressive sideways bend in four mutually perpendicular directions to measure the corresponding impedance value (including the resistance and the reactance). The results indicated that the impedance value showed the same trend as the resistance, implying that the impedance was primarily affected by the resistance. The impedance value for the instruments in the 80% and 60% TLL groups increased by about 6 mΩ (about 7.5%) more than that of the instruments in the intact and 40% TLL groups. The SEM analysis result showed that crack striations were only found at the tip of the thread on the cracked surface of the instrument, consistent with the impedance measurements that found the impedance value of the cracked surface to be significantly different from those in other surfaces. These findings indicate that the impedance value may represent an effective parameter for evaluating the micro-structural status of Ni-Ti rotary instruments subjected to fatigue loading.

Probing the alkyl ligands on silylated mesoporous MCM-41 using hyperpolarized 129Xe NMR spectroscopy.

Variable-temperature hyperpolarized (HP) 129Xe NMR spectroscopy has been employed to characterize surface properties of mesoporous MCM-41 modified by silylation treatment. The characteristic chemical shifts responsible for Xe-surface interactions exhibit strong correlations with both the surface coverage and chain length of the grafted alkylsilanes. Consequently, the deshielding medium contribution due to individual alkyl ligand can be deduced based on the group contribution analysis revealing the potential use of HP 129Xe NMR for probing the surface properties of organic-functionalized porous materials.