Experimental investigation and thermodynamic analysis of application of hybrid nanofluid in a parabolic solar trough collector.

In this research, thermal modeling has been done to investigate the effect of nanofluid on the performance of the linear parabolic collector. Therminol vapor/liquid phase fluid (VP-1) has been used as a base fluid; iron oxide nanoparticles have been used to produce mono-nanofluid; and iron oxide multi-walled carbon nanotubes nanocomposite has been used as nanoparticles to produce hybrid nanofluid. The fluid flow inside the absorber tube of the collector is assumed to be turbulent. The results show that when hybrid nanofluid and mono-nanofluid are used, the energy and exergy efficiencies of the collector are higher than those for the conditions of using the base fluid, but their amount is slightly lower with the use of hybrid nanofluid than when the working fluid is mono-nanofluid. According to the obtained results, the highest energy efficiency of the linear parabolic collector using nanofluid and mono-nanofluid is 70.2% and 70.4%, respectively, and the highest exergy efficiency is 35.7% and 35.9%, respectively. Despite this, the friction coefficient of mono-nanofluid compared to hybrid nanofluid was obtained on average about 9% higher. The results showed that the criterion for evaluating the performance of the collector (hydrodynamic thermal efficiency) when hybrid nanofluid is used is more than when mono-nanofluid is used.

Prediction models based on soil properties for evaluating the heavy metal uptake into Hordeum vulgare L. grown in agricultural soils amended with different rates of sewage sludge.

The current study aims at forming new prediction models to be employed in the approximating the possible uptake of a range of 10 heavy metals (HMs) (Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb and Zn) by Hordeum vulgare tissues including roots, shoots and grains following its growth in soil amended with sewage sludge (SS) using conditions employed in greenhouses. The present study determined an insignificant difference between the actual and predicted quantities of the HMs in the three tissues using t values. The majority of the predicted quantities of the HMs were acceptable with the exception of Cd in the shoots, Cu in grains and Pb in roots. Consequently, it is possible to use these models in assessing the cultivation of barley plants in soil amended with SS in a safe way, while simultaneously monitoring any potential risks to the health of humans.

Simultaneous synthesis of H2, O2, and N2 via an innovatory energy system in Coronavirus pandemic time: Design, techno-economic assessment, and optimization approaches.

In this work, an innovative integrated system that is incorporated from solid oxide electrolysis cells and an oxygen separator membrane is assessed and optimized from the techno-economic aspects to respond to oxygen, hydrogen, and nitrogen demands for hospitals and other health care applications. Besides, a parametric comparison is conducted to apprehend the weights of parameters changes on the performance of criteria. Relying on the assessments, from the hydrogen production of 1 kg/s, 23.19 kg/s of oxygen, and 50.22 kg/s of nitrogen are produced. The parametric study shows that by raising the working temperature of the electrolyzer, the cell voltage variation has descending trend and the power consumption of the system is decreased by 19%. Finally, the results of multi-criteria optimization on the Pareto front reveal that in the optimal case, the system payback period is attained at about 5.32 years and the exergy efficiency of 92.47%, which are improved 16.6% and 16.2% compared to the base case, sequentially. Consequently, this system is proposed to consider as a cost-effective and reliable option towards its vital and valuable productions, in the pandemic period and after's.