Assessing the impact of plasma-activated water-assisted heat-moisture treatment on the extrusion-recrystallization process of hausa potato starch.

The study explored the plasma-activated water (PAW)-assisted heat-moisture treatment (HMT) on the structural, physico-chemical properties, and in vitro digestibility of extrusion-recrystallized starch. Native starch of hausa potatoes underwent modification through a dual process involving PAW-assisted HMT (PHMT) followed by extrusion-recrystallization (PERH) using a twin-screw extruder. The PHMT sample showed surface roughness and etching with a significantly greater (p ≤ 0.05) RC (20.12 %) and ΔH (5.86 J/g) compared to DHMT. In contrast, PERH-induced structural damage, resulting in an irregular block structure, and altered the crystalline pattern from A to B + V-type characterized by peaks at 17.04°, 19.74°, 22°, and 23.94°. DSC analysis showed two endothermic peaks in all the extrusion-recrystallized samples, having the initial peak attributed to the melting of structured amylopectin chains and the second one linked to the melting of complexes formed during retrogradation. Dual-modified samples displayed notably increased transition temperatures (To1 74.54 and 74.17 °C, To2 122.65 and 121.49 °C), along with increased RS content (43.76 %-45.30 %). This study envisages a novel approach for RS preparation and broadens the utilization of PAW in starch modification synergistically with environmentally friendly techniques.

Fabrication and characterization of talipot starch-based biocomposite film using mucilages from different plant sources: A comparative study.

Biocomposite films were prepared by formulating talipot starch with plant mucilage derived from shoeblack leaves, okra, and seeds of basil, fenugreek, and flax, which were identified as SBM-TSF, OKM-TSF, BSM-TSF, FGM-TSF, and FXM-TSF, respectively. The plant mucilages enhanced the crosslinking of the filmogenic solutions, which increased the film's relative crystallinity. Upon topographical investigation, the biocomposite films exhibited the same compact and homogeneous structures as the native talipot starch film (NTSF), but with finer corrugations. When compared to NTSF, the addition of plant mucilage decreased the moisture content while increasing the thickness and opacity. SBM-TSF showed significantly reduced (p ≤ 0.05) solubility and water vapor permeability, indicating that increased crosslink formation in the film obstructed the water vapor passage. Among all the biocomposite films, the BSM-TSF had the greatest tensile strength, making it more resistant to stretching. Among the studied biocomposite films, SBM-TSF and BSM-TSF demonstrated improved thermal and biodegradation stability.

Effect of foaming parameters on the physical and phytochemical properties of tomato powder.

The objective of this work was to study the effect of foaming parameters on the physical and phytochemical properties of tomato powder. A central composite rotatable design of experiments was defined with two parameters (concentration of soy protein isolate [SPI]: 1-5% and whipping time: 2-14 min) with 5 levels for each parameter. The foam was prepared by whipping tomato puree after adding SPI and dried in a thin layer (4 mm ± 1) at 50 °C. The obtained results showed the predominant effect of the concentration of SPI on the physical and phytochemical properties compared to whipping time. The powder prepared under foaming conditions of 5% SPI and whipping time of 8 min showed an increase of 97, 39, 62, and 46% in the total phenolics, total flavonoids, antioxidant activity, and porosity, respectively, while the bulk density decreased by about 25%.

Can hydro-thermo-mechanical treatment by instant controlled pressure-drop (DIC) be used as short time roasting process? Effect of processing parameters on sensory, physical, functional, and color attributes of Egyptian carob powder.

This study deals with the manufacture of a specific cocoa-like powder from Egyptian carob. The crucial unit operation consists of texturing/roasting unseeded carob kibbles, with the aim being to ensure perfect control of the chemical transformations that generate the desired flavor, drying to remove excess moisture, deodorizing to eliminate the undesirable flavor, and texturing to favor the physical/micro-mechanical changes that regulate the microstructure of the end product, in order to obtain an expanded-granule powder that can be used in many food formulations. The effect of saturated steam pressure of 0.30-0.60 MPa (133.5-158.8 °C) and processing time of 40-70 s, on the sensory attributes, physical and functional properties, and color characteristics were evaluated and optimized using response surface methodology (RSM). DIC-texturing/roasting could be used to improve the sensory and color characteristics, increase the expansion ratio and oil holding capacity, and decrease the bulk density of DIC-textured/roasted carob powder. The desired quality of textured/roasted carob powder was obtained at 0.60 MPa (158.8 °C) for 55 s (experimental conditions) with water holding capacity close to those of non-textured/unroasted sample. DIC can be used as a coupled process of texturing and roasting at 0.60 MPa for 68 s as predicted by RSM.

Hydrothermal modifications of nonconventional kithul (Caryota urens) starch: physico-chemical, rheological properties and in vitro digestibility.

Effect of hydrothermal modifications (autoclaving, annealing and heat moisture treatment) on physico-chemical, rheological properties and in vitro digestibility of kithul starch was studied. Annealing and heat moisture treatment decreased swelling index, solubility and increased crystalline properties as compared with autoclaving. Autoclaving, annealing and heat moisture treatment caused significant morphological damages such as large holes and fissures on the kithul starch, in addition, granules changed from oval to donut shape. Heat moisture treatment formed higher number of agglomerated starch granules. Light transmittance decreased after hydrothermal modifications. Autoclaving and annealing increased the pasting viscosities (except break down viscosity) of kithul starch. A significant increase (p ≤ 0.05) in peak temperature, conclusion temperature and enthalpy was found in annealed and heat moisture treated kithul starches. The digestibility of kithul starch decreased with increasing resistant starch after annealing and heat moisture treatment. Autoclaved, annealed and heat moisture treated kithul starches exhibited higher value of storage modulus (G') and loss modulus (G″) than native kithul starch. It entail to higher firmness of modified starch gel. The current study showed that the remarkable changes formed by hydrothermal modifications increased the industrial acceptance of kithul starch.

Texture and color characteristics of swell-dried ready-to-eat Zaghloul date snacks: Effect of operative parameters of instant controlled pressure drop process.

In this work, development of ready-to-eat snacks from Zaghloul date using swell-drying process was studied. Pre-dried Zaghloul date samples having 12% water content on dry basis were textured by instant controlled pressure drop technique (DIC) at different operative parameters, saturated steam pressure (p) and processing time (t), ranged from 0.2 to 0.6 MPa and from 9 to 35 s, respectively. The effect of these operative parameters on texture, color, and sensory characteristics of swell-dried (SD) Zaghloul date snacks were determined and optimized through the response surface methodology. Textural (expansion ratio, hardness, springiness, cohesiveness, and chewiness) and color (L*, a*, b*, C*, and ΔE*) characteristics were significantly affected by the operative parameters of DIC. The optimized textural characteristics was identified for SD Zaghloul date at p = 0.6 MPa and t = 22 s with slight yellowness, while the best color properties were observed for texturing conditions of p = 0.2 MPa and t = 22 s. The expansion ratio εr was then 46% higher and the hardness was 262% lower for SD than airflow-dried date. Instrumental analysis such as texture profile analysis and Hunter's Lab color analyzer could be used to describe the texture and color changes occurred during food drying. Beside these analyses, the expansion ratio could be used to describe the texture as well. Swell-drying process, an alternative drying process, is defined as DIC-assisted hot air drying. The thermo-mechanical effects of DIC are mainly induced by the abrupt pressure drop toward a vacuum after short-time treatment (9-35 s) by saturated steam pressure (0.2 up to 0.6 MPa). The abrupt pressure drop rate induces an autovaporization of product's water immediately decreasing the product's temperature allowing it to cross the glass transition Tg border. The impact of DIC operative parameters on Zaghloul date could be observed through the expansion ratio, and the textural characteristics (hardness HA, springiness SP, cohesiveness CO, and chewiness CH).