Bioprocess development for extraction and purification of cellulases from Aspergillus niger 3ASZ using statistical experimental design techniques.

The amount of cellulosic materials is large and may lead to environmental pollution, so they can be converted into useful materials for use in food or energy. Statistical design (Plackett-Burman and Box-Behnken) was the main topic of this study and was used to optimize the effect of environmental factors on cellulase production by Aspergillus niger. Cellulase production using Plackett-Burman was 6.86-fold higher than the production of cellulase using the basal medium. B0X-Benken showed an increase in the cellulase production equal to 18 times compared to the basal medium, where the cellulase produced had an activity equal to 79.4 U/mL/min. Ammonium sulfate precipitation was applied to the crude enzyme, followed by sequential fractionation with an Amicon system. The Amicon was used to demonstrate the final volume, total enzyme activity, specific activity, purification fold, and yield of cellulase (partially purified enzyme). Numerous cellulolytic enzymes are abundant in Aspergillus species. All of the data showed that Aspergillus sp. might be a reliable source of industrially and economically useful cellulases. By statistically calculating the relevance of a large number of elements in one experiment using a multifactorial statistical design, time may be saved while still maintaining the validity of each component.

2,4-Dichlorophenol biotransformation using immobilized marine halophilic Bacillus subtilis culture and laccase enzyme: application in wastewater treatment.

BACKGROUND: 2,4-Dichlorophenol (2,4-DCP) is a very toxic aromatic compound for humans and the environment and is highly resistant to degradation. Therefore, it is necessary to develop efficient remediation and cost-effective approaches to this pollutant. Microbial enzymes such as laccases can degrade phenols, but limited information is known about immobilized bacterial laccase and their reuse. METHODS: Immobilization of marine halophilic Bacillus subtilis AAK cultures via entrapment and adsorption techniques and degradation of different phenolic compounds by immobilized cells were estimated. Partial purification and immobilization of laccase enzymes were carried out. In addition, the biodegradation of 2,4-DCP and others contaminated by wastewater was investigated. RESULTS: Immobilization of cells and partially purified laccase enzymes by adsorption into 3% alginate increased 2,4-DCP biotransformation compared with free cells and free enzymes. In addition, the reuse of both the immobilized culture and laccase enzymes was evaluated. The highest removal of 2,4-DCP from pulp and paper wastewater samples inoculated by immobilized cells and the immobilized enzyme was 90% and 95%, respectively, at 50 h and 52 h of incubation, compared to free cells and free enzyme. CONCLUSION: The results of this study have revealed the immobilization of a biocatalyst and its laccase enzyme as a promising technique for enhancing the degradation of 2,4-DCP and other toxic phenolic and aromatic compounds. The reuse of the biocatalyst and its laccase enzyme enabled the application of this cost-effective bioremediation strategy.

Lead adsorption and antibacterial activity using modified magnetic biochar/sodium alginate nanocomposite.

Biochar is one of the most promising wastewater treatment materials. As shown in the Scanning Electron Micrograph, the magnetic biochar (BC) cross-linked glutaraldehyde (G) with sodium alginate (SA) (BC-G-SA) nanocomposite formed with uniform particle size without aggregation, and an X-Ray Diffraction study revealed that the BC-G-SA nanocomposite has an amorphous structure. The BC-G-SA nanocomposite enhanced the microwave adsorption process for Pb (II). The maximum metal capacity value was obtained using the microwave adsorption technique at pH 5.0 and contact time 20 s for Pb (II) at medium and low microwave power (940 and 1400 µmol g-1, respectively). Pb (II) adsorption isotherm follows a pseudo-second-order model. Also, the BC-G-SA nanocomposite effectively inhibited bacterial growth throughout the growth kinetics experiment. BC-G-SA inhibited the growth of S. aureus at a MIC of 200 g mL-1, whereas L. monocytogenes had a MIC of 200 g mL-1. The MIC values for E. faecalis and E. faecium were significantly lower (50 and 100 g mL-1, respectively).

Incidence of virulence determinants and antibiotic resistance in lactic acid bacteria isolated from food products.

Background: Lactic acid bacteria (LAB) confer beneficial health effects in humans. However, the safety of these bacteria and their potential to spread resistance in the environment must be evaluated. Materials & methods: Fifty-three LAB were isolated from different food samples and assessed for the prevalence of virulence determinants and antibiotic resistance profile. Results: Multiple resistance was reported for Lactobacillus brevis MIM04, having revealed phenotypic resistance to vancomycin (MIC >128 µg/ml), ampicillin, cefotaxime, oxacillin and gentamicin. Virulence traits (cylA, gelE, esp and agg) were detected using specific primers. Enterococcus faecium CHE32, Lactobacillus plantarum CHE37 and E. faecium MLK68 lack virulence genes, possess antimicrobial activity and survive in low pH and bile salt conditions. Conclusion: Isolated LAB revealed probiotic properties.

Novel Siwa propolis and colistin-integrated chitosan nanoparticles: elaboration; in vitro and in vivo appraisal.

Aim: The present study aimed to formulate novel cremophore-decorated chitosan nanoparticles of colistin, integrated with Siwa propolis extract, to solve bacterial resistance to colistin. Materials & methods: The novel nanoformula was prepared using an incorporation method. Physicochemical assessment and in vivo studies of the selected nanoformulations were performed. Results: The nanoformulation exhibited a nanosize of 48.3 nm, high ζ potential (43.6 mV), high entrapment efficiency (75%) and complete bacterial growth eradication within 2 h (minimum inhibitory concentration = 6.25 µg/ml). Histological examination showed that incorporation of colistin into the nanoformulation could successfully prevent its nephrotoxicity. Conclusion: Tailoring of proper nanocarrier could successfully revert bacteria from being colistin-resistant to colistin-sensitive. The developed nanoformulation can be considered as a potential antibacterial agent in pneumonia treatment.

Polyvinylpyrrolidone-Aminopropyl-SBA-15 schiff Base hybrid for efficient removal of divalent heavy metal cations from wastewater.

The mesoporous silica-polymer hybrid was prepared as an adsorbent for divalent heavy metals (Pb(II), Ni(II), and Cu (II)) from rice husk and polyvinylpyrrolidone (PVP) through three successive steps. The first is the preparation of the mesoporous silica (SBA-15), the second is grafting 3-aminopropyltrimethoxysilane on SBA-15, and the following step is the formation of Schiff base (PVP-SBA-15) between amine end-capped silica and PVP moieties. The materials were characterized by different techniques, including FTIR, low and wide-angle XRD, N2-adsorption, and HR-TEM. The NH2-SBA-15 displayed a moderate affinity toward heavy element ions under study. Grafting of PVP moieties introduces a high affinity toward heavy metal ions, and the adsorption is a well-fitted Langmuir adsorption model. A series of experiment adsorption equilibrium reported with SBA-15, NH2-SBA-15, and PVP-SBA-15, which showed an adsorption capacity of 128 mg/g (Cu (II)), 175 mg/g (Pb (II)) and 72 mg/g for Ni(II). Kinetic studies have shown that the best way to describe the adsorption process of heavy metals is pseudo-first-order. The value of ΔG°, ΔH°, and ΔS° demonstrated that the adsorption of heavy metals on the PVP-SBA-15 was endothermic in nature and spontaneous. These results exhibited that PVP-SBA-15 material has considerable competence in eliminating heavy metals from wastewater.

Assessment of the heavy metal bioremediation efficiency of the novel marine lactic acid bacterium, Lactobacillus plantarum MF042018.

Heavy metal pollution is one of the most serious environmental and human health risk problem associated with industrial progress. The present study was conducted with the goal of isolation and characterization of metal-resistant lactic acid bacteria (LAB) from the Alexandrian Mediterranean Seacoast, Egypt, with their possible exploitation in metal remediation. Lactobacillus plantarum MF042018 exhibited high degree of resistance, up to 500 and 100 ppm, to both nickel and chromium, respectively, with multiple antibiotic resistance (MAR) index above 0.5. In an attempt to improve chromium removal by L. plantarum MF042018, Plackett-Burman followed by Box-Behnken statistical designs were applied. An initial Cr2+ concentration of 100 ppm and inoculum size of 3% presented the best conditions for the accumulation of chromium by L. plantarum MF042018. The study was also navigated to assess the biosorption capacity of L. plantarum MF042018, the maximum uptake capacity (q) of both Cd2+ and Pb2+ was recorded at pH 2.0 and a temperature of 22 °C after 1 hr. The biosorption process of Cd2+ and Pb2+ was well explained by the Langmuir isotherm model better than the Freundlich isotherm. Furthermore, the results revealed that the use of L. plantarum MF042018 is an effective tool for the treatment of hazardous metal-polluted battery-manufacturing effluent. Therefore, the present study implies that L. plantarum MF042018 can be applied as a promising biosorbent for the removal of heavy metals from industrial wasterwaters.

Synthesis and applications of CaCO3/HPC core-shell composite subject to heavy metals adsorption processes.

Core-shell particles are a class of materials from nanostructures that have received increased attention recently due to their interesting properties and wide range of applications in catalysis, biology, chemistry of materials and sensors. Simple and cost-effective one-pot synthesis route to directly prepare CaCO3@highly porous carbon microsphere in a core-shell structure (denoted as CaCO3/HPC) had been developed as a high-performance heavy metals sorbent. XRD (X-Ray Diffraction), SEM (scanning electron microscopy), Raman, FTIR (Fourier Transform Infrared Spectroscopy) and BET tools were used in structure characterization of the products. The adsorption properties of the products obtained were studied. From this study the adsorption performances of CaCO3/HPCwere found to be optimal by comparing the maximum adsorption capacity of heavy metal ions (Pb (II) and Co(III)) with CaCO3/HPC.The adsorption of CaCO3/HPCtest to Pb(II) and Co(III), in particular Pb(II) had a good effect over a wide pH range (pH 2-7). The maximum adsorption capacitiesof CaCO3/HPC for Pb (II) and Co(III) were 677.6 mg/g, and 308.5 mg/g, respectively, at pH = 6 (lead ion was 5.5) and 25 °C, and the adsorption rate was fast. The lead ions can be adsorbed almost entirely in 5 minutes and only 0.2 g/L was the best effective doseof adsorbent. The prepared and carefully testednanocomposites had been found to be of excellent performances in adsorption and in analytical regeneration. The adsorption processof Pb(II) and Co(III) through core shell of the preparednanocomposite adsorbent was found to be a second-order chemical adsorption and fit for Langmuir and Freundlich isotherms, in the form of amonomolecular and multi-layer heavy metal adsorptionprocesses. The (CaCO3/HPC)-based sorbents (with and without) pelletization shows superior heavy metals adsorption performances compared to a CaCO3-based sorbent.

Draft Genome Sequence of an Enterococcus faecalis Strain (24FS) That Was Isolated from Healthy Infant Feces and Exhibits High Antibacterial Activity, Multiple-Antibiotic Resistance, and Multiple Virulence Factors.

Enterococcus faecalis 24FS is a bacteriocin-producing, multiply antibiotic-resistant, and potentially virulent bacterium isolated from healthy infant feces. The draft 2.9-Mb genome sequence revealed 2,968 protein-encoding genes; 11 antibiotic resistance, 8 virulence, and 3 bacteriocin genes; and 2 plasmids, 4 prophages, 30 insertion sequence (IS) elements, 1 transposon, and 1 integron.

Synthesis of recyclable carbon/lignin biocomposite sorbent for in-situ uptake of BTX contaminants from wastewater.

In this work, both palm-date pits and pulping black liquor industrial wastes were recycled as low-cost starting materials for the production of three series of granule activated carbon (gAC)/Kraft lignin (KL) (gAC/KLx, x = 33, 50 and 67%) biocomposites using a one-pot solid-state method. The gAC/KLx biocomposites with defined characteristics were examined towards batch adsorption of BTX (Benzene, Toluene, and Xylene) in multi-solute salty wastewaters. Optimization of adsorption performances under different experimental conditions were carried out using high performance liquid chromatography (HPLC). Adsorption modeling versus contact time (0-12 h) and BTX concentrations (150-2250 mg/L) were examined using non-linear forms of nine kinetic and five isotherm equations to best understand gAC/KL0.5 suitability for BTX sorption/recovery processing. Accordingly, the gAC/KLx at KL blended ratio of 50% was found to be the topmost to achieve the highest BTX capacity even at broad ranges of water salinity (0-100 g/L) and pH (3-9) values. The adsorption mechanism found to best described by physico-sorption (E ≈ 0.12-1.38 kJ/mol) via the hydrophobic interaction and diffusion mechanisms. In respect to gAC/KL0.5 affinities, the sorption capacity followed the descending sequence of X ≥ T > B. Particularly, the maximum theoretical BTX capacity using the best fitted Langmuir-Freundlich model (L-FM) for gAC/KL0.5 was found to be slightly higher than obtained by gAC (363.9 and 360.1 mg/g, respectively), along with higher initial sorption (h) rate (≈742.47 mg/g.h) than of gAC (≈559.85 mg/g.h) and KL (≈22.22 mg/g.h). Batch BTX sorption/recovery processes and estimated cost suggested the effective utilization of gAC/KL0.5 as a promising in-expensive sorbent (0.31 ±â€¯0.05 US$/kg) for commercial decontamination of petroleum hazardous (BTX) pollutants from wastewaters up to five reuse cycles.

Synthesis, spectroscopic, thermal, antimicrobial and electrochemical characterization of some novel Ru(iii), Pt(iv) and Ir(iii) complexes of pipemidic acid.

Three new solid complexes of pipemidic acid (Pip-H) with Ru3+, Pt4+ and Ir3+ were synthesized and characterized. Pipemidic acid acts as a uni-dentate chelator through the nitrogen atom of the -NH piperazyl ring. The spectroscopic data revealed that the general formulas of Pip-H complexes are [M(L) n (Cl) x ]·yH2O ((1) M = Ru3+, L: Pip-H, n = 3, x = 3, y = 6; (2) M = Pt4+, L: Pip-NH4, n = 2, x = 4, y = 0 and (3) M = Ir3+, L: Pip-H, n = 3, x = 3, y = 6). The number of water molecules with their locations inside or outside the coordination sphere were assigned via thermal analyses (TG, DTG). The DTG curves refer to 2-3 thermal decomposition steps where the first decomposition step at a lower temperature corresponds to the loss of uncoordinated water molecules followed by the decomposition of Pip-H molecules at higher temperatures. Thermodynamic parameters (E*, ΔS*, ΔH* and ΔG*) were calculated from the TG curves using Coats-Redfern and Horowitz-Metzeger non-isothermal models. X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques were carefully used to assign properly the particle sizes of the prepared Pip-H complexes. The biological enhancement of Pip-H complexes rather than free chelate were assessed in vitro against four kinds of bacteria G(+) (Staphylococcus epidermidis and Staphylococcus aureus) and G(-) (Klebsiella and Escherichia coli) as well as against the human breast cancer (MCF-7) tumor cell line.

Statistically optimized ceftriaxone sodium biotransformation through Achromobacter xylosoxidans strain Cef6: an unusual insight for bioremediation.

The present study underlines a unique promising approach toward efficient biotransformation of ceftriaxone sodium (Ceftx), a highly frequent prescribed cephalosporin antibiotic, by a newly bacterium namely Achromobacter xylosoxidans strain Cef6 isolated from Ceftx contaminated raw materials in pharmaceutical industries. A three step sequential statistical-mathematical approach (Plackett-Burman design [PBD], Central Composite Design [CCD], and ridge-canonical analyses) was anticipated to optimize the biotransformation process. Ceftx concentration and medium volume: bottle volume ratio, two key determinants, significantly (p < 0.05) affected the process outcome deduced by regression analysis of PBD' data. CCD and ridge-canonical analyses localized the optimal levels of Ceftx concentration and medium volume: 250 ml bottle volume ratio to be 0.39 and 7.973 g Ceftx/L modified tryptic soy broth achieving Ceftx biotransformation (100%) after 39 h under aerobic static conditions at 30 °C, irrespectively deduced via HPLC analysis. Impressively, only one of five Ceftx byproducts was detected by the end of the biotransformation process. To the best of authors' knowledge, this is the first report addressing a detailed study regarding efficient biotransformation of Ceftx by single bacterium not bacterial consortium under aerobic conditions. Present data would greatly encourage applying this approach for decontamination of some Ceftx contaminated environmental sites.

Complete Genome Sequence of Lactobacillus plantarum 10CH, a Potential Probiotic Lactic Acid Bacterium with Potent Antimicrobial Activity.

Lactobacillus plantarum 10CH is a bacteriocin-producing potential probiotic lactic acid bacterium (LAB) strain isolated from cheese. Its complete nucleotide sequence shows a single circular chromosome of 3.3 Mb, with a G+C content of 44.51%, a 25-gene plantaricin bacteriocin gene cluster, and the absence of recognized virulence factors.

Hydrogel Dressing with a Nano-Formula against Methicillin-Resistant Staphylococcus aureus and Pseudomonas aeruginosa Diabetic Foot Bacteria.

This study proposes an alternative approach for the use of chitosan silver-based dressing for the control of foot infection with multidrug-resistant bacteria. Sixty-five bacterial isolates were isolated from 40 diabetic patients. Staphylococcus aureus (37%) and Pseudomonas aeruginosa (18.5%) were the predominant isolates in the ulcer samples. Ten antibiotics were in vitro tested against diabetic foot clinical bacterial isolates. The most resistant S. aureus and P. aeruginosa isolates were then selected for further study. Three chitosan sources were tested individually for chelating silver nanoparticles. Squilla chitosan silver nanoparticles (Sq. Cs-Ag(0)) showed the maximum activity against the resistant bacteria when mixed with amikacin that showed the maximum synergetic index. This, in turn, resulted in the reduction of the amikacin MIC value by 95%. For evaluation of the effectiveness of the prepared dressing using Artemia salina as the toxicity biomarker, the LC50 was found to be 549.5, 18,000, and 10,000 µg/ml for amikacin, Sq. Cs-Ag(0), and dressing matrix, respectively. Loading the formula onto chitosan hydrogel dressing showed promising antibacterial activities, with responsive healing properties for the wounds in normal rats of those diabetic rats (polymicrobial infection). It is quite interesting to note that no emergence of any side effect on either kidney or liver biomedical functions was noticed.

In vitro antagonistic activity, plant growth promoting traits and phylogenetic affiliation of rhizobacteria associated with wild plants grown in arid soil.

The role of plant growth-promoting rhizobacteria (PGPR) in adaptation of plants in extreme environments is not yet completely understood. For this study native bacteria were isolated from rhizospeheric arid soils and evaluated for both growth-promoting abilities and antagonistic potential against phytopathogenic fungi and nematodes. The phylogentic affiliation of these representative isolates was also characterized. Rhizobacteria associated with 11 wild plant species from the arid soil of Almadinah Almunawarah, Kingdom of Saudi Arabia (KSA) were investigated. From a total of 531 isolates, only 66 bacterial isolates were selected based on their ability to inhibit Fusarium oxysporum, and Sclerotinia sclerotiorum. The selected isolates were screened in vitro for activities related to plant nutrition and plant growth regulation as well as for antifungal and nematicidal traits. Isolated bacteria were found to exhibit capabilities in fix atmospheric nitrogen, produce ammonia, indoleacetic acid (IAA), siderophores, solubilize phosphate and zinc, and showed an antagonistic potential against some phytopathogenic fungi and one nematode species (Meloidogyne incognita) to various extent. Isolates were ranked by their potential ability to function as PGPR. The 66 isolates were genotyped using amplified rDNA restriction analysis (ARDRA) and 16S rRNA gene sequence analysis. The taxonomic composition of the representative genotypes from both rhizosphere and rhizoplane comprised Bacillus, Enterobacter and Pseudomonas. Out of the 10 genotypes, three strains designated as PHP03, CCP05, and TAP02 might be regarded as novel strains based on their low similarity percentages and high bootstrap values. The present study clearly identified specific traits in the isolated rhizobacteria, which make them good candidates as PGPR and might contribute to plant adaption to arid environments. Application of such results in agricultural fields may improve and enhance plant growth in arid soils.

Evening primrose oil and celecoxib inhibited pathological angiogenesis, inflammation, and oxidative stress in adjuvant-induced arthritis: novel role of angiopoietin-1.

Rheumatoid arthritis is a chronic inflammatory disease characterized by overproduction of inflammatory mediators along with undermined oxidative defensive mechanisms. Pathological angiogenesis was found to play a critical role in the progression of this disease. The current study was carried out to evaluate the anti-angiogenic, anti-inflammatory, and anti-oxidant effects of evening primrose oil (EPO), rich in gamma linolenic acid (GLA), either alone or in combination with aspirin or celecoxib, on adjuvant-induced arthritis. Arthritis was induced by subcutaneous injection of complete Freund's adjuvant (CFA) in the right hind paw of male albino rats. All treatments were administered orally from day 0 (EPO, 5 g/kg b.w.) or day 4 (celecoxib, 5 mg/kg; aspirin, 150 mg/kg) till day 27 after CFA injection. In the arthritic group, the results revealed significant decrease in the body weight and increase in ankle circumference, plasma angiopoietin-1 (ANG-1) and tumor necrosis factor-alpha (TNF-α) levels. Anti-oxidant status was suppressed as manifested by significant decline in reduced glutathione content along with decreased enzymatic activity of superoxide dismutase and increased lipid peroxidation. Oral administration of EPO exerted normalization of body weight, ANG-1, and TNF-α levels with restoration of activity as shown by reduced malondialdehyde levels. Moreover, histopathological examination demonstrated that EPO significantly reduced the synovial hyperplasia and inflammatory cells invasion in joint tissues, an effect that was enhanced by combination with aspirin or celecoxib. The joint use of GLA-rich natural oils, which possess anti-angiogenic, anti-inflammatory, and anti-oxidant activities, with traditional analgesics represents a promising strategy to restrain the progression of rheumatoid arthritis.

15-PGDH inhibitors: the antiulcer effects of carbenoxolone, pioglitazone and verapamil in indomethacin induced peptic ulcer rats.

BACKGROUND AND AIM: 15-hydroxyprostaglandin dehydrogenase (15-PGDH) is the enzyme responsible for prostaglandins (PGs) metabolism. PGs have an important role in the protection of stomach mucosa against destructive stimuli. The aim of the present study is to investigate the inhibitory effect of carbenoxolone, pioglitazone and verapamil on 15-PGDH enzyme. MATERIALS AND METHODS: The experiments were carried out in the Faculty of Pharmacy, Suez Canal University, Ismailia, Egypt from May 2011 to August 2011. Adult male albino rats were fasted for 18 hours before administration of high dose of indomethacin (30 mg/kg, p.o.), except for the negative control group which received saline only, followed by pyloric ligation to induce acute gastric ulcers. The rats were pretreated orally with saline, pioglitazone (20 mg/kg), verapamil (25 mg/kg), carbenoxolone (30 mg/kg) or their combinations 30 minutes before indomethacin. The rats were sacrificed after four hours of pyloric ligation. The effects of the previous treatments on the ulcer index (Ui), the microscopic appearance of gastric mucosa, the gastric acid output, the gastric barrier mucus content, and 15-PGDH enzyme activity were determined. RESULTS: Indomethacin resulted in severe ulceration and increased gastric acid output (p < 0.05) compared to negative control. The rats pretreated with carbenoxolone, pioglitazone, verapamil had reduced ulcer index, gastric acid output and 15-PGDH activity (p < 0.05) compared to either indomethacin group or the negative control group. Individual treatments with carbenoxolone, pioglitazone or verapamil increased gastric barrier mucus (p < 0.05) compared to either indomethacin group or the negative control group. The combinations of verapamil with either carbenoxolone or pioglitazone caused further reduction in ulcer index, gastric acid output and 15-PGDH activity (p < 0.05), while causing further increase in gastric barrier mucus (p < 0.05) compared to their respective individual treatment group. CONCLUSIONS: The antiulcer properties of pioglitazone and verapamil are, in part, consequences of their inhibitory effect on the enzyme 15-PGDH, responsible for PGs degradation, and the resultant prolongation of PGE2 biological activity in rat stomach mucosa.

Sildenafil citrate protects against gastric mucosal damage induced by indomethacin in rats.

BACKGROUND AND OBJECTIVES:   The present study was conducted to investigate the possible gastroprotective effect of sildenafil citrate, a selective inhibitor of cyclic guanosine monophosphate-specific phosphodiesterase, against indomethacin-induced gastric damage in rats. Further, the study was extended to investigate some possible mechanisms underlying this effect. MATERIALS AND METHODS: Forty rats were assigned to vehicle (saline), control (indomethacin, 30 mg/kg, p.o.), ranitidine (50 mg/kg, p.o.), sildenafil (5 mg/kg, p.o.) and sildenafil (10 mg/kg, p.o.); the drugs were administered 30 minutes prior to indomethacin. Four hours after indomethacin administration, all rats were sacrificed and the gastric juices were collected. Then, each stomach was opened and macroscopically examined for gastric lesions and longitudinal sections were used for biochemical and histopathological analysis. RESULTS: Our results indicated that indome-thacin induced marked ulceration in the gastric mucosa, in addition to an increase in gastric acidity as compared to saline group (p ≤ 0.05). Furthermore, indomethacin group showed lower concentration of mucin and reduced glutathione, whereas, lipid peroxides and tumor necrosis factor-α (TNF-α) were elevated in the stomach homogenate. Pretreatment with sildenafil (5 mg/kg) significantly reduced gastric acid secretion, ulcer score and lipid peroxides production without effect on mucin, TNF-α, or nitric oxide (NO). The higher dose of sildenafil (10 mg/kg) provided similar results with the exception of increasing tissue NO (p ≤ 0.05). CONCLUSIONS: We concluded that sildenafil can protect the gastric mucosa against the aggressive effect of indomethacin via increasing NO and inhibiting lipid peroxidation. Therefore, sildenafil might be helpful in preventing the gastric adverse effects of non-steroidal anti-inflammatory drugs in a clinical setting.

Synthesis, characterization and the antimicrobial activity of new eco-friendly ionic liquids.

A green microwave-assisted procedure for the preparation of a series of 24 new 1-alkyl-3-ethylimidazolium ionic liquids with different functional groups in the alkyl chain is described. Moreover, the synthesis of a variety of ten new geminal dicationic ionic liquids is reported. Their structures were characterized by FT-IR, (1)H NMR, (13)C NMR, (11)B, (19)F, (31)P, and mass spectrometry. Several ionic liquids were selected for antimicrobial activity studies, yielding very interesting and promising results.

Solid-state fermentation for the production of meroparamycin by streptomyces sp. strain MAR01.

The antibiotic meroparamycin was produced in the free culture system of Streptomyces sp. strain MAR01. Five solid substrates (rice, wheat bran, Quaker, bread, and ground corn) were screened for their ability to support meroparamycin production in solid-state fermentation. In batch culture, wheat bran recorded the highest antibacterial activity with the lowest residual substrate values. The highest residual substrate values were recorded for both ground corn and Quaker. On the other hand, no antibacterial activity was detected for rice as a solid substrate. The use of the original strength of starch-nitrate medium in the solid-state fermentation gave a lower antibacterial activity compared with the free culture system. Doubling the strength of this medium resulted in the increase in the activity to be equivalent to the free culture. The initial pH (7.0) of the culture medium and 2 ml of spore suspension (1 ml contains 5x10(9) spores/ml) were the optima for antibiotic production. The water was the best eluent for the extraction of the antibiotic from the solid-state culture. Ten min was enough time to extract the antibiotic using a mixer, whereas, 60 min was required when shaking was applied. Semicontinuous production of meroparamycin using a percolation method demonstrated a more or less constant antibacterial activity over 4 runs (450-480 microg/ml). The semicontinuous production of the antibiotic was monitored in a fixed-bed bioreactor and the maximum activity was attained after the fourth run (510 microg/ml) and the overall process continued for 85 days.