Magnetically controlled insertion of magnetic nanoparticles into membrane model.

Polysaccharide-coated magnetic nanoparticles (MNPs) have been reported to show potential applications in many biomedical fields. In this report, we have studied the interactions between magnetite (Fe3O4) MNPs functionalized with polysaccharides (diethylamino-ethyl dextran, DEAE-D or chitosan, CHI) with different membranes models by Langmuir isotherms, incorporation experiments, and brewster angle microscopy (BAM). In this report, zwitterionic 1,2-distearoyl-sn-glycerol-3-phosphoethanolamine (DSPE) and anionic 1,2-distearoyl-sn-glycerol-3-phosphate (DSPA) phospholipid, were used to form membrane models. Incorporation experiments (π-t) as well as the compression isotherms demonstrate positive interactions between MNPs and DSPE or DSPA monolayers. The study assessed the impact of varying initial surface pressure on a preformed phospholipid monolayer to determine the maximum insertion pressure (MIP) and synergy. Our findings indicate that the primary driving force of the coated MNPs incorporation into the monolayer predominantly stems from electrostatic interaction. The drop in the subphase pH from 6.0 to 4.0 led to an enhancement of the MIP value for DSPA phospholipid monolayer. On the other hand, for DSPE, the drop in the pH does not affect the MIP values. Besides, the presence of a magnetic field induces an enhancement of the insertion process of the MNPs into DSPA preformed monolayer, demonstrating that a previous interaction between MNPs and phospholipid preformed monolayer needs to take place to enhance the incorporation process. This work opens novel perspectives for the research of the influence of magnetic fields on the incorporation of MNPs into model membranes.

Interaction between Pharmaceutical Drugs and Polymer-Coated Fe3O4 Magnetic Nanoparticles with Langmuir Monolayers as Cellular Membrane Models.

Surface modification of magnetic nanoparticles (MNPs) has been reported to play a significant role in determining their interactions with cell membranes. In this research, the interactions between polymer functionalized (chitosan, CHI or diethylamino-ethyl dextran, DEAE-D) Fe3O4 MNPs, pharmaceutical drugs and model cell membranes were investigated by Langmuir isotherms and adsorption measurements. In this study, 1,2-distearoyl-sn-glycerol-3-phosphate (DSPA) phospholipid monolayers were used as cell membrane models. Insertion experiments demonstrate that diclofenac (DCFN) is not absorbed at the air-water interface, whereas triflupromazine (TFPZ) has a MIP (maximum insertion pressure) of 35 m Nm-1. The insertion of composites MNPs:TFPZ or DCFN has larger MIP values, indicating that the MNPs are adsorbed on the monolayer with the drugs. An Fe3O4@CHI:DCFN composite presented an MIP of 39 m Nm-1 and Fe3O4@DEAE-D:DCFN presented an impressive MIP of 67 mNm-1. In the case of TFPZ, the enhancement in the MIP values is also evident, being 42 mNm-1 for Fe3O4@CHI:TFPZ and 40 mNm-1 for Fe3O4@DEAE-D:DCFN composite. All MNPs:drugs composites have MIP values greater than commonly accepted membrane pressure values, indicating that MNPs:drugs can penetrate a cellular membrane. The fact that the composite MNPs:drugs present greater MIP values than separated compounds indicates that polymer-coated MNPs can act as good drug delivery systems.

Visible-light driven water oxidation and oxygen production at soft interfaces.

The visible light driven water oxidation reaction (WOR) by the organic electron acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyano-quinodimethane (TCNQF4) was studied at the water|butyronitrile interface. The WOR was performed at neutral pH, and without any metal or organometallic catalysts. The oxygen generated was measured by GC-MS and cyclic voltammetry, and the protons produced were monitored by measuring the aqueous pH. This work opens novel perspectives for water photo-oxidation in liquids and artificial photosynthesis.

S-incorporated TiO2 coatings grown by plasma electrolytic oxidation for reduction of Cr(VI)-EDTA with sunlight.

The plasma electrolytic oxidation (PEO) technique was used to prepare photocatalytic S-TiO2 coatings on Ti sheets; the incorporation of the S ions was possible from the electrolyte for modifying the structural and optics characteristics of the material. In this work, substrates of Ti (ASME SB-265 of 20 × 20 × 1 mm) were used in a PEO process in 10 min, using constant voltage pulses of 340 V with frequency of 1 kHz and duty cycles of 10% and of 30%. Solutions with H2SO4 (0.1 M) and CH4N2S (52 and 79 mM) were used as electrolytes. X-ray diffraction, scanning electron microscopy, and energy dispersive spectroscopy (EDS) were utilized to analyze the surface morphology, crystalline phase, and chemical composition of the samples. According to the results, the catalyst coatings had microporous structure and contained anatase-rutile TiO2 nanocrystalline mixture, until 73.2% rutile and 26.8% anatase in the samples grown with 30% duty cycle and the lowest concentration of CH4N2S. From the EDS measurements, the incorporation of sulfur ions to the coatings was 0.08 wt%. 99.5% reduction efficiency of Cr(VI)-EDTA with sunlight was observed after 2 h; it was determined by diphenyl carbazide spectrophotometric method. These coatings have potential for effective sunlight heterogeneous photoreduction of this toxic, cumulative, and non-biodegradable heavy metal that contaminates the soil and water and is a serious risk to sustainability, ecosystems, and human health.