RESUMO
Three nonhalogenated ionic liquids (ILs) dissolved in 2-ethylhexyl laurate (2-EHL), a biodegradable oil, are investigated in terms of their bulk and electro-interfacial nanoscale structures using small-angle neutron scattering (SANS) and neutron reflectivity (NR). The ILs share the same trihexyl(tetradecyl)phosphonium ([P6,6,6,14]+) cation paired with different anions, bis(mandelato)borate ([BMB]-), bis(oxalato)borate ([BOB]-), and bis(salicylato)borate ([BScB]-). SANS shows a high aspect ratio tubular self-assembly structure characterized by an IL core of alternating cations and anions with a 2-EHL-rich shell or corona in the bulk, the geometry of which depends upon the anion structure and concentration. NR also reveals a solvent-rich interfacial corona layer. Their electro-responsive behavior, pertaining to the structuring and composition of the interfacial layers, is also influenced by the anion identity. [P6,6,6,14][BOB] exhibits distinct electroresponsiveness to applied potentials, suggesting an ion exchange behavior from cation-dominated to anion-rich. Conversely, [P6,6,6,14][BMB] and [P6,6,6,14][BScB] demonstrate minimal electroresponses across all studied potentials, related to their different dissociative and diffusive behavior. A mixed system is dominated by the least soluble IL but exhibits an increase in disorder. This work reveals the subtlety of anion architecture in tuning bulk and electro-interfacial properties, offering valuable molecular insights for deploying nonhalogenated ILs as additives in biodegradable lubricants and supercapacitors.
RESUMO
Ln3+-doped (Ln = lanthanide) nanocrystals are garnering strong interest for their potential as optical materials in various applications. For that reason, a thorough understanding of photophysical processes and ways to tune them in these materials is of great importance. This study, using Eu3+-doped Sr2YF7 as a well-suited model system, underscores the (not unexpected) significance of surface site occupation of Ln3+ and also challenges the prevailing views about their contribution to the luminescence of the system. High-temperature cation exchange and epitaxial shell growth allow nanocrystals to exclusively feature Eu3+ residing at the surface or in the interior, thereby separating their spectral responses. Meticulous experiments reveal that nanocrystals with high doping concentrations exhibit luminescence primarily from surface Eu3+, in contrast to the popular belief that luminescence from surface Ln3+ is largely negligible. The present study shows, on the one hand, the necessity to revise common ideas and also reveals the potential for manipulating the luminescence of such materials through an, until now, unperceived way of surface engineering.
RESUMO
Employing ionic liquid-assisted microwave synthesis and moderate heat treatment allows for the preparation of otherwise difficult-to-obtain perovskite-type BaSn1-xZrxO3 solid solutions (0 ≤ x ≤ 1). The impact of substituting Sn for the crystal structure, crystallinity, morphology, and photocatalytic performance was investigated. The obtained materials are characterized by X-ray diffraction, scanning electron microscopy, Brunauer-Emmett-Teller (BET) surface area analysis, X-ray photoelectron spectroscopy, UV-Vis diffuse reflectance spectroscopy, photoluminescence spectroscopy, and Raman and IR spectroscopy. SEM images show that the morphology of the samples varies from rods for x = 0, 0.2 to spherical for x = 0.5, 0.8, 1. Upon Zr for Sn substitution, the band gap changes from 3.1 to 5.0 eV as the valence and conduction bands move to lower and higher energies. The photocatalytic activities of the BaSn1-xZrxO3 samples in the hydroxylation of terephthalic acid (TA) follow the order BaSn0.5Zr0.5O3> BaSn0.8Zr0.2O3> BaSnO3> BaSn0.2Zr0.8O3> BaZrO3. The superior photocatalytic activity of BaSn0.5Zr0.5O3 can be attributed to the synergistically favorable combination of a suitable band structure, band gap size, and increased surface area-to-volume ratio, resulting in a diminished crystalline particle size unattainable from samples prepared via traditional synthetic routes or without ionic liquid.
RESUMO
Commercial (protiated) samples of the "green" and biodegradable bioester 2-ethylhexyl laurate (2-EHL) were mixed with D-2-EHL synthesized by hydrothermal deuteration, with the mixtures demonstrating bulk structuring in small-angle neutron scattering measurements. Analysis in a polymer scattering framework yielded a radius of gyration (Rg) of 6.5 Å and a Kuhn length (alternatively described as the persistence length or average segment length) of 11.2 Å. Samples of 2-EHL dispersed in acetonitrile formed self-assembled structures exceeding the molecular dimensions of the 2-EHL, with a mean aggregation number (Nagg) of 3.5 ± 0.2 molecules across the tested concentrations. We therefore present structural evidence that this ester can function as a nonionic (co)surfactant. The available surfactant-like conformations appear to enable performance beyond the low calculated hydrophilic-lipophilic balance value of 2.9. Overall, our data offer an explanation for 2-EHL's interfacial adsorption properties via self-assembly, resulting in strong emolliency and lubricity for this sustainable ester-based bio-oil.
RESUMO
The new ternary compounds La15Ni13Bi5 and La9Ni8Sn5 were obtained by arc melting under argon from appropriate amounts of the elements and subsequent annealing at 800 °C for 2 weeks. Single-crystal X-ray diffraction reveals that they represent two new structure types: La15Ni13Bi5 crystallizes in the hexagonal space group P62m [hP33, a = 14.995(3), c = 4.3421(10) Å, V = 845.5(4) Å3, Z = 1] and La9Ni8Sn5 in P63/m [hP88, a = 23.870(15), c = 4.433(3) Å, V = 2187(3) Å3, Z = 4]. The crystal structures of both compounds are characterized by hexagonal honeycomb-based motifs formed by Ni and Sn that extend along the c axis. The building motif with its three-blade wind turbine shape is reminiscent of the organic molecule triptycene and is unprecedented in extended solids. First-principles calculations have been performed in order to analyze the electronic structure and provide insight into chemical bonding. They reveal significant electron transfer from La to Ni and the respective p-element, which supports the formation of the polyanionic Ni-p-element network. DFT calculations suggest paramagnetic-like behavior for both compounds, which was confirmed by magnetic measurements.
RESUMO
A series of 19 ionic liquids (ILs) based on phosphonium and imidazolium cations of varying alkyl-chain lengths with the orthoborate anions bis(oxalato)borate [BOB]- , bis(mandelato)borate, [BMB]- and bis(salicylato)borate, [BScB]- , are synthesized and studied using small-angle neutron scattering (SANS). All measured systems display nanostructuring, with 1-methyl-3-n-alkyl imidazolium-orthoborates forming clearly bicontinuous L3 spongelike phases when the alkyl chains are longer than C6 (hexyl). L3 phases are fitted using the Teubner and Strey model, and diffusely-nanostructured systems are primarily fitted using the Ornstein-Zernicke correlation length model. Strongly-nanostructured systems have a strong dependence on the cation, with molecular architecture variation explored to determine the driving forces for self-assembly. The ability to form well-defined complex phases is effectively extinguished in several ways: methylation of the most acidic imidazolium ring proton, replacing the imidazolium 3-methyl group with a longer hydrocarbon chain, substitution of [BOB]- by [BMB]- , or exchanging the imidazolium for phosphonium systems, irrespective of phosphonium architecture. The results suggest there is only a small window of opportunity, in terms of molecular amphiphilicity and cation:anion volume matching, for the formation of stable extensive bicontinuous domains in pure bulk orthoborate-based ILs. Particularly important for self-assembly processes appear to be the ability to form H-bonding networks, which offer additional versatility in imidazolium systems.
RESUMO
A series of four homologous silicides have been discovered during systematic explorations in the central part of the La-Ni-Si system at 1000 °C. All compounds La12.5Ni28.0Si18.3 (n = 3; a = 28.8686(8), c = 4.0737(2) Å, Z = 3), La22.1Ni39.0Si27.8 (n = 4; a = 20.9340(6), c = 4.1245(2) Å, Z = 1), La32.9Ni49.8Si39.3 (n = 5; a = 24.946(1), c = 4.1471(5) Å, Z = 1), and La44.8Ni66.1Si53.4 (n = 6; a = 28.995(5), c = 4.158(1) Å, Z = 1) crystallize in the hexagonal space group P63/m and can be generalized according to Lan(n+1)+xNin(n+5)+ySi(n+1)(n+2)-z with n = 3-6. Their crystal structures are based on AlB2-type building blocks, fused La-centered Ni6Si6 hexagonal prisms, yielding larger oligomeric equilateral domains with the edge size equal to n. The domains extend along the c axis and show checkered ordering of the cationic and anionic parts, while all their atoms are located on mirror planes. Lan(n+1)+xNin(n+5)+ySi(n+1)(n+2)-z can be considered as a mirror series to the La-rich La(n+1)(n+2)Nin(n-1)+2Sin(n+1), where an exchange of the formal cationic and anionic sites, i.e., La and Si, occurs. The La-Ni-Si system is the first system where two such analogous series have been observed.
RESUMO
The understanding of structure and bonding in intermetallic phases still lags behind that of molecular compounds. For that reason, exploring intermetallic phases and identifying structural patterns and relationships are particularly important for closing this knowledge gap. In particular, here we report on the addition of increasing amounts of platinum to â¼2:1 mixtures of tin and neodymium, which yields eight ternary Pt/Sn/Nd compounds, four of which have not been reported before. Interestingly, except for PtSnNd (1), all observed ternary phases of the system can be derived from the binary compounds Sn2Nd and Sn5Nd2 by adding Pt to the composition(s), as they lie on or close to two lines: Sn2Nd-Pt (Pt0.21(1)Sn2Nd (2), PtSn2Nd (3), Pt1.33Sn2Nd (4), Pt2-xSn2+xNd (x = 0.27(3), 5), and Pt3Sn2Nd (6)) or Sn5Nd2-Pt (Pt1.5Sn5-xNd2 (x = 0.16(2), 7) and Pt3Sn5Nd2-x (x = 0.161(8), 8)). While the introduction of increasing amounts of Pt to the binaries Sn2Nd and Sn5Nd2 leads to stepwise changes in the coordination environment of Nd, Pt preserves its coordination over the entire system in the form of interpenetrating bipyramidal {PtSn5Nd5} clusters.
RESUMO
The new phase Mg7Pt4Ge4 (≡Mg8â¡1Pt4Ge4; â¡ = vacancy) was prepared by reacting a mixture of the corresponding elements at high temperatures. According to single crystal X-ray diffraction data, it adopts a defect variant of the lighter analogue Mg2PtSi (≡Mg8Pt4Si4), reported in the Li2CuAs structure. An ordering of the Mg vacancies results in a stoichiometric phase, Mg7Pt4Ge4. However, the high content of Mg vacancies results in a violation of the 18-valence electron rule, which appears to hold for Mg2PtSi. First principle density functional theory calculations on a hypothetical, vacancy-free "Mg2PtGe" reveal potential electronic instabilities at EF in the band structure and significant occupancy of states with an antibonding character resulting from unfavorable Pt-Ge interactions. These antibonding interactions can be eliminated through introduction of Mg defects, which reduce the valence electron count, leaving the antibonding states empty. Mg itself does not participate in these interactions. Instead, the Mg contribution to the overall bonding comes from electron back-donation from the (Pt, Ge) anionic network to Mg cations. These findings may help to understand how the interplay of structural and electronic factors leads to the "hydrogen pump effect" observed in the closely related Mg3Pt, for which the electronic band structure shows a significant amount of unoccupied bonding states, indicating an electron deficient system.
RESUMO
Light-emitting materials based on earth-abundant metals, such as manganese hold great promise as emitters for organic lighting devices. In order to apply such emitter materials and, in particular, to overcome the problem of self-quenching due to cross-relaxation, we investigated a series of tetrabromidomanganate ([MnBr4]2-) salts with bulky tetraalkylphosphonium counter cations [Pnnn]+, namely [Pnnnn]2[MnBr4] (n = 4 (1), 6 (2) and 8 (3)), which can be obtained by a straightforward reaction of the respective phosphonium bromide and MnBr2. Variation of the cation size allows control of the properties of the resulting ionic materials. 1 and 3 qualify as ionic liquids (ILs), where 1 features a melting point of 68 °C, and 3 is liquid at room temperature and even at very low temperatures. Furthermore, 1 and 2 show the formation of higher-ordered thermotropic mesophases. For 1 a transition to a thermodynamically metastable smectic liquid crystalline phase can be observed at room temperature upon reheating from the metastable glassy state; 2 appears to form a plastic crystalline phase at â¼63 °C, which persists up to the melting point of 235 °C. The photoemission is greatly affected by phase behaviour and ion dynamics. A photoluminescence quantum yield of 61% could be achieved, by balancing the increase in Mn2+-Mn2+ separation and reducing self-quenching through increasingly large organic cations which leads to adverse increased vibrational quenching. Compared to analogous ammonium compounds, which have been promoted as Ìinorganic hybrid perovskitesÌ, the phosphonium salts show superior performance, with respect to photoluminescent quantum yield and thermal and air/humidity stability. As the presented compounds are not sensitive to the atmosphere, in particular moisture, and show strong visible electroluminescence in the green region of light, they are important emitter materials for use in organic light-emitting devices.
RESUMO
Open framework materials such as zeolites and metalorganic frameworks are garnering tremendous interest because of their intriguing architecture and attractive functionalities. Thus, new types of open framework materials are highly sought after. Here, we present the discovery of completely new inorganic framework materials, where, in contrast to conventional inorganic open frameworks, the scaffold is not based on tetrahedral EO4 (E = main group element) but octahedral MO6 (M = transition metal) building blocks. These structural features place them closer to polyoxometalates than zeolites. The first representatives of this class of materials are [(R)24(NH4)14(PO(OH)2)6]·[M134(PO3(OH,F))96F120] (M = Co, R = C2Py = 1-ethylpyridinium and M = Ni, R = C4C1Py = 1-butyl-3-methylpyridinium) featuring interlinked fullerene-like nanosphere cavities. Having a transition metal building up the framework brings about interesting properties, for example, spin-glass behavior, and, with this particular topology, a hedgehog-like spin orientation.
RESUMO
Aqueous solutions of a series of short carbon chain tetra(n-alkyl)ammonium hydroxides, [Nnnnn][OH] with n = 2: n-ethyl, 3: n-propyl, 4: n-butyl, have been serendipitously found to be potential candidates for direct air carbon capture (DAC) when being used as reagents in more complicated reactions. Aqueous solutions of [N3333][OH], [N2222][OH], or [N3333][OH] with UO2SO4·3H2O and 1,4-diamidoximylbenzene, and [N4444][OH] with cytosine (HCyt) directly absorb CO2 from the atmosphere upon mild heating in the open atmosphere crystallizing in complexes reaching up to 2 : 1 CO2/[Nnnnn]OH ratio. [N2222][HCO3]·3H2O (1), [N2222]2[H(HCO3)3]·5H2O (2), [N3333][HCO3]·0.5H2O (3), [N3333][H(HCO3)2] (4), [N3333]2[(tpa)(H2CO3)2] (5; tpa = terephthalate), [N4444][H(Cyt)(HCO3)]·H2O (6) and [N4444][H2(Cyt)2(HCO3)]·H2O (7) have been isolated in crystalline form and structurally characterized by single crystal X-ray diffraction. The compounds are characterized by complex polyanionic formations from bicarbonate dimers ([(HCO3)2·(H2O)]24-) or chains ([H(HCO3)2]nn- or [H2(tpa)(HCO3)2]n2n-) to water-bicarbonate associates ([(HCO3)2·6H2O]2- and [(H2CO3·(HCO3)2)2·6H2O·2H2O]2-) and three-component anionic layers ([H(Cyt)(HCO3)·H2O]nn- and [H2(Cyt)2(HCO3)·H2O]nn-) frequently showing proton sharing. While some hydroxides themselves can maintain a high CO2/[Nnnnn][OH] ratio, particularly 2 and 4, the presence of secondary hydrogen bond donors/acceptors may increase the sorption efficiency through decreased solubility and enhanced crystallization.
Assuntos
Bicarbonatos , Dióxido de Carbono , Cristalização , Dióxido de Carbono/química , Hidróxidos , Água , Prótons , CarbonoRESUMO
The structural and magnetic properties of the ThCr2Si2-type solid solution LaMn2(Ge1-xSix)2 (x = 0.0 to 1.0) have been investigated employing a combination of X-ray diffraction, magnetization and neutron diffraction measurements, which allowed establishing a magnetic composition-temperature phase diagram. Substitution of Ge by Si leads to a compression of the unit cell, which affects the magnetic exchange interactions. In particular, the magnetic structure of LaMn2(Ge1-xSix)2 is strongly affected by the unit cell parameter c, which is related to the distance between adjacent Mn layers. Commensurate antiferromagnetic layers and a canted ferromagnetic structure dominate the Si-rich part of the solid solution, whilst an incommensurate antiferromagnetic flat spiral and a conical magnetic structure are observed in the Si-poor part.
RESUMO
By employing the pyridinium hexafluorophosphate task-specific ionic liquids 1-butyl-4-methylpyridinium hexafluorophosphate ([C4mpyr][PF6]) and 1-ethylpyridinium hexafluorophosphate ([C2pyr][PF6]) as the reaction medium, mineralizer, structure-directing agent, and, in the case of the smaller pyridinium cation, even a structural component, it was possible to obtain five new alkali metal iron phosphates featuring interconnected FeX6 octahedra and PX4 (X = F, O, or OH) tetrahedra. NaFe(PO3F)2 (1) is a dense 3D structure, RbFe(PO3F)(PO2(OH)F)(PO2(OH)2) (2) features 1D strands, (C2pyr)LiFe(PO3F)3(PO2F2)F (3) has 2D layers, and LiFe(PO3F)(PO2F2)F (4) as well as Cs0.75Fe(PO2.75(OH)0.25F)(PO2F2)2 (5) are 3D open frameworks. While in 1-2 as well as in 4 and 5, FeX6 octahedra and PX4 (X = F, O, or OH) tetrahedra alternate, 3 features octahedra dimers, Fe2X11 (X = F, O, or OH). The magnetic behavior of all compounds is governed by antiferromagnetic interactions. Interestingly, 3 exhibits a broad maximum in the temperature dependence of the magnetic susceptibility, characteristic of a low-dimensional magnetic system consistent with the presence of Fe-Fe dimers in its crystal structure.
RESUMO
Reaction of the elements yielded Ca3Pt4Bi8 and CaPtBi, which are, to the best of our knowledge, the first reported ternary Ca-Pt-Bi compounds. The compounds crystallize isostructural to the Pd analogs Ca3Pd4Bi8 (own structure type) and CaPdBi (TiNiSi structure type), respectively. Employing a multistep temperature treatment allows for the growth of mm-sized single crystals of Ca3Pd4Bi8 and Ca3Pt4Bi8 from a Bi self-flux. Their crystal structures can be visualized as consisting of a three-dimensional extended polyanion [M4Bi8]6- (M = Pd, Pt), composed of interlinked M-Bi chains propagating along the c direction, and Ca2+ cations residing in one-dimensional channels between the chains. First-principles calculations reveal quasi-one-dimensional electronic behavior with reduced effective electron masses along [001]. Bader analysis points to a strong anionic character of the M species (M = Pd, Pt) in Ca3M4Bi8. Thus, it is more appropriate to address the compounds Ca3Pd4Bi8 and Ca3Pt4Bi8 as a palladide and platinide, respectively. Magnetization measurements indicate diamagnetic behavior with no indications for superconductivity down to 2 K. Electrical resistivity data are consistent with metallic behavior and suggest predominant electron-phonon scattering.
RESUMO
Ionic liquids (ILs) are becoming a revolutionary synthesis medium for inorganic nanomaterials, permitting more efficient, safer and environmentally benign preparation of high quality products. A smart combination of ILs and unconventional synthesis methods allows added value to be drawn from the broad matrix of available property combinations. Mixed systems such as Deep Eutectic Solvents (DES) offer a similarly broad combinatorial playground, which is also beginning to translate into applications. Approached holistically, these liquids therefore enable new universal manufacturing techniques that provide solutions to the existing problems of nanomanufacturing, and beyond that will open completely new horizons and possibilities for controlling the growth and assembly of nanostructures. Examples that illustrate the power of ILs in the improved manufacturing of nanomaterials are explored, such as the synthesis of light phosphors with exceptional quantum yields, record-figure-of merit thermoelectrics, and efficient photocatalysts, alongside developments in DES nanostructure and deep eutectic-solvothermal and ionothermal techniques.
RESUMO
Many crystalline materials form polymorphs and undergo solid-solid transitions between different forms as a function of temperature or pressure. However, there is still a poor understanding of the mechanism of transformation. Conclusions about the transformation process are typically drawn by comparing the crystal structures before and after the conversion, but gaining detailed mechanistic knowledge is strongly impeded by the generally fast rate of these transitions. When the crystal morphology does not change, it is assumed that crystallinity is maintained throughout the process. Here we report transformation between polymorphs of ZnCl2(1,3-diethylimidazole-2-thione)2 which are sufficiently slow to allow unambiguous assignment of single crystal to single crystal transformation with shape preservation proceeding through an amorphous intermediate phase. This result fundamentally challenges the commonly accepted views of polymorphic phase transition mechanisms.
RESUMO
In the search for new multifunctional materials, particularly for application in solid-state lighting, a set of terbium salicylato (Sal) complexes of general composition [Cat][Tb(Sal)4] with the commonly ionic liquid-forming (IL) cations [Cat] = (2-hydroxyethyl)trimethylammonium (choline) (Chol+), diallyldimethylammonium (DADMA+), 1-ethyl-3-methylimidazolium (C2C1Im+), 1-butyl-3-methylimidazolium (C4C1Im+), 1-ethyl-3-vinylimidazolium (C2Vim+), and tetrabutylphosphonium (P4444+) were synthesized. All Tb compounds exhibit strong green photoluminescence of high color purity by energy transfer from the ligand in comparison with what the analogous La compounds show, and quantum yields can reach up to 63% upon ligand excitation. When excited with an HF generator, the compounds show strong green electroluminescence with the same features of mission. The findings promise a high potential of application as emitter materials in solid-state lighting. As an additional feature, the Tb compounds show a strong response to applied external fields, rendering them multifunctional materials.
RESUMO
SrMn2P2 and CaMn2P2 are insulators that adopt the trigonal CaAl2Si2-type structure containing corrugated Mn honeycomb layers. Magnetic susceptibility χ and heat capacity versus temperature T data reveal a weak first-order antiferromagnetic (AFM) transition at the Néel temperature [Formula: see text] K for SrMn2P2 and a strong first-order AFM transition at [Formula: see text] K for CaMn2P2 Both compounds exhibit isotropic and nearly T-independent [Formula: see text], suggesting magnetic structures in which nearest-neighbor moments are aligned at [Formula: see text] to each other. The 31P NMR measurements confirm the strong first-order transition in CaMn2P2 but show critical slowing down above [Formula: see text] for SrMn2P2, thus also evidencing second-order character. The 31P NMR measurements indicate that the AFM structure of CaMn2P2 is commensurate with the lattice whereas that of SrMn2P2 is incommensurate. These first-order AFM transitions are unique among the class of (Ca, Sr, Ba)Mn2 (P, As, Sb, Bi)2 compounds that otherwise exhibit second-order AFM transitions. This result challenges our understanding of the circumstances under which first-order AFM transitions occur.
RESUMO
We report two new rare-earth (R) ternary intermetallic compounds-Ho2Ni0.8T1.2 with T = Si and Ge-that correspond to the R5Ni2T3 phase earlier reported to form in Dy-Ni-T and Ho-Ni-T ternary systems. The compounds crystallize in a filled version of the orthorhombic Zr2Ni1-xP-type structure with x = 0.52; their stoichiometry, determined from both single-crystal and powder X-ray diffraction data, is centered on Ho2Ni0.8T1.2 with a narrow solid solubility range for the silicide, while the germanide appears to be a line phase. In addition to R = Dy and Ho, R2Ni0.8T1.2 compounds also form for R = Y and Tb, representing the first examples of rare-earth-based compounds adopting the Zr2Ni1-xP structural prototype. Bulk magnetization data reveal the main transitions of the ferrimagnetic or ferromagnetic type at TC = 38 K for Ho2Ni0.8Si1.2 and TC = 37 K for Ho2Ni0.8Ge1.2, which are followed by subsequent magnetic reordering at lower temperatures. Neutron diffraction shows complex magnetic structures below TC with both ferromagnetic and antiferromagnetic components and magnetic propagation vector κ1 = [0, 0, 0]. Below TN â 24 K (22 K) for the silicide (germanide), an additional antiferromagnetic coupling following an incommensurate magnetic propagation vector κ2 = [κx, 0, 0] appears to coexist with the first magnetic structure.