Alpha lipoic acid mitigates adverse impacts of drought stress on growth and yield of mungbean: photosynthetic pigments, and antioxidative defense mechanism.

Context: Exogenous use of potential organic compounds through different modes is a promising strategy for the induction of water stress tolerance in crop plants for better yield. Aims: The present study aimed to explore the potential role of alpha-lipoic acid (ALA) in inducing water stress tolerance in mungbean lines when applied exogenously through various modes. Methods: The experiment was conducted in a field with a split-plot arrangement, having three replicates for each treatment. Two irrigation regimes, including normal and reduced irrigation, were applied. The plants allocated to reduced irrigation were watered only at the reproductive stage. Three levels of ALA (0, 0.1, 0.15 mM) were applied through different modes (seed priming, foliar or priming+foliar). Key results: ALA treatment through different modes manifested higher growth under reduced irrigation (water stress) and normal irrigation. Compared to the other two modes, the application of ALA as seed priming was found more effective in ameliorating the adverse impacts of water stress on growth and yield associated with their better content of leaf photosynthetic pigments, maintenance of plant water relations, levels of non-enzymatic antioxidants, improved activities of enzymatic antioxidants, and decreased lipid peroxidation and H2O2 levels. The maximum increase in shoot fresh weight (29% and 28%), shoot dry weight (27% and 24%), 100-grain weight (24% and 23%) and total grain yield (20% and 21%) in water-stressed mungbean plants of line 16003 and 16004, respectively, was recorded due to ALA seed priming than other modes of applications. Conclusions: Conclusively, 0.1 and 0.15 mM levels of ALA as seed priming were found to reduce the adverse impact of water stress on mungbean yield that was associated with improved physio-biochemical mechanisms. Implications: The findings of the study will be helpful for the agriculturalists working in arid and semi-arid regions to obtain a better yield of mungbean that will be helpful to fulfill the food demand in those areas to some extent.

The Quest for Two-Dimensional MBenes: From Structural Evolution to Solar-Driven Hybrid Systems for Water-Fuel-Energy Generation and Phototherapy.

The field of 2D materials has advanced significantly with the emergence of MBenes, a new material derived from the MAX phases family, a novel class of materials that originates from the MAX phases family. Herein, this article explores the unique characteristics and morphological variations of MBenes, offering a comprehensive overview of their structural evolution. First, the discussion explores the evolutionary period of 2D MBenes associated with the several techniques for synthesizing, modifying, and characterizing MBenes to tailor their structure and enhance their functionality. The focus then shifts to the defect chemistry of MBenes, electronic, catalytic, and photothermal properties which play a crucial role in designing multifunctional solar-driven hybrid systems. Second, the recent advancements and potentials of 2D MBenes in solar-driven hybrid systems e.g. photo-electro catalysis, hybrid solar evaporators for freshwater and thermoelectric generators, and phototherapy, emphasizing their crucial significance in tackling energy and environmental issues, are explored. The study further explores the fundamental principles that regulate the improved photocatalytic and photothermal characteristics of MBenes, highlighting their promise for effective utilization of solar energy and remediation of the environment. The study also thoroughly assesses MBenes' scalability, stability, and cost effectiveness in solar-driven systems. Current insights and future directions allow researchers to utilize MBenes for sustainable and varied applications. This review regarding MBenes will be valuable to early researchers intrigued with synthesizing and utilizing 2D materials for solar-powered water-energy-fuel and phototherapy systems.

Enhancing Methane Gas Sensing through Defect Engineering in Ag-Ru Co-doped ZnO Nanorods.

Detection of leaks of flammable methane (CH4) gas in a timely manner can mitigate health, safety, and environmental risks. Zinc oxide (ZnO), a polar semiconductor with controllable surface defects, is a promising material for gas sensing. In this study, Ag-Ru co-doped into self-assembled ZnO nanorod arrays (ZnO NRs) was prepared by a one-step hydrothermal method. The Ag-Ru co-doped sample shows a good hydrophobic property as a result of its particular microstructure, which results in high humidity resistance. In addition, oxygen vacancy density significantly increased after Ag-Ru co-doping. Density functional theory (DFT) calculations revealed an exceptionally high charge density accumulated at the Ru sites and the formation of a localized strong electric field, which provides additional energy for the CH4 reaction with •O2- at the surface at room temperature. Optimized AgRu0.025-ZnO demonstrated an outstanding CH4 sensing performance, with a limit of detection (LOD) as low as 2.24 ppm under free-heat and free-light conditions. These findings suggest that introducing defects into the ZnO lattice, such as oxygen vacancies and localized ions, offers a promising approach to improving the gas sensing performance.

Change in mean postoperative pain in patients undergoing tonsillectomy with cold water versus usual practice: A pragmatic trial.

Introduction: Tonsillectomy is one of the most common procedures performed in otolaryngology. There are various methods to perform tonsillectomies (cold and hot). Thermal damage and inflammation of the surrounding tissue using monopolar cautery is said to point to increased pain whereas immediate cooling of the burnt area is thought to reduce pain owing to heat dissipation. Our objective was to determine the difference in mean post-tonsillectomy pain scores among patients irrigated with cold water (4°C) and in patients not irrigated with cold water. Material and Methods: A quasi-experimental trial was conducted from January 2016 to December 2017 at a tertiary care hospital. All tonsillectomies were carried out with monopolar cautery at a power of 20 W. Patients either received cold water irrigation post tonsillectomy of the tonsillar bed (intervention arm) or no irrigation (control arm). The pain score was measured on Days 0, 1, 3, 5, and 7. Pain scores were charted on a visual analog scale on the respective days. Results: Seventy-eight patients were included in the study. The mean age of our patients was 10.26 (4.24) years old in the intervention arm, and 11.95 (4.19) years old in the control arm. It was observed that the pain was significantly lower in patients with cold water irrigation of the tonsillar fossa on Days 1, 3, 5, and 7 (p = 0.001). There were no readmissions postprocedure and none of our patients developed any complications postsurgery. Conclusions: In this trial, we report a reduced pain score at all days of observation in the intervention group. Irrigation of the tonsillar fossa is a safe, cost-effective, and less technically demanding technique that could be employed to reduce postoperative pain. Further studies with randomization, blinding and a larger sample size could further improve on our results.

Dose-Response Study of Caffeine on Postnatal Weight Gain in Premature Neonates-A Retrospective Cohort Study.

Background: Caffeine citrate (CC)-induced excessive energy expenditure, diuresis, natriuresis, and other CC-associated potential side effects (CC-APSEs) result in lower daily weight gain (WG) in premature neonates. This study aimed to assess higher CC-doses' effect on the mean daily-WG (MD-WG) and CC-APSE development, considering 5 mg/kg/day as the standard regimen. Method: This retrospective cohort study included neonates of ≤36 weeks gestational age and received CC-therapy. The same participants were followed for data analysis in two postnatal phases: 15-28 and 29-42 days of life (DOL). Based on daily CC-dose, formed group-I=(5 mg/kg/day), group-II=(>5-7 mg/kg/day), and group-III=(>7 mg/kg/day). Data was analyzed separately for group-II and group-III using group-I as the standard. Results: The study included 284 neonates. During phase-I, the MD-WG was significantly higher in group-I than group-II (19.9 ± .88 g/kg/d vs 17.5 ± .49, P = .031) and group-III (19.9 ± .88 g/kg/d vs 16.7 ± .71, P < .001). During 29-42 DOL, the MD-WG of group-I was only significantly higher than group-III (21.5 ± .42 g/kg/d vs 18.1 ± .39 g/kg/d, P = .003) and comparable with group-II. During 15-28 DOL, CC-APSEs were significantly higher in group-II and group-III but during 29-42 DOL was significant only in group-III. Conclusion: Exposure to higher caffeine doses in this study cohort is associated with lower postnatal WG in preterm neonates than standard daily doses may be due to its catabolic effects and CC-APSEs.

Aqueous humour interleukin-6 and vision outcomes with anti-vascular endothelial growth factor therapy.

BACKGROUND: This analysis evaluated aqueous humour (AH) interleukin (IL)-6 concentrations and the association between AH IL-6 and visual outcomes in patients with neovascular age-related macular degeneration (nAMD) or diabetic macular oedema (DMO) receiving anti-vascular endothelial growth factor (VEGF) monotherapy. METHODS: Post hoc analysis of the multicentre, double-masked, randomised HARBOR (NCT00891735) and READ-3 (NCT01077401) trials. HARBOR enrolled treatment-naïve nAMD patients. READ-3 enrolled treatment-naïve/previously treated DMO patients. HARBOR patients received ranibizumab 0.5 or 2.0 mg monthly or as needed; AH samples were collected at month 2, after two previous intravitreal injections. READ-3 patients received ranibizumab 0.5 or 2.0 mg as needed; AH samples were collected at baseline and months 3, 6, 9, and 12. MAIN OUTCOME MEASURE: association between AH IL-6 concentrations and month 24 best-corrected visual acuity (BCVA). RESULTS: In both trials (HARBOR, N = 36; READ-3, N = 137), patients with higher AH IL-6 concentrations had worse visual outcomes. HARBOR patients with low AH IL-6 concentrations at month 2 had a mean (95% CI) BCVA change at month 24 of +2.9 (-2.6, 8.3) letters, whereas patients with high AH concentrations had a mean (95% CI) BCVA change of -9.0 (-22.7, 4.7) letters. READ-3 patients with low AH concentrations at baseline had a mean (95% CI) BCVA change at month 12 of +9.3 (7.4, 11.3) letters, whereas patients with high AH concentrations had a mean (95% CI) BCVA change of +5.6 (2.2, 9.1) letters. CONCLUSIONS: Higher IL-6 AH concentrations may predict suboptimal visual responses to anti-VEGF monotherapy in patients with nAMD/DMO.

Solid Self-Nanoemulsifying Drug Delivery Systems of Furosemide: In Vivo Proof of Concept for Enhanced Predictable Therapeutic Response.

Liquid self-nano emulsifying drug delivery systems (SNEDDS) of furosemide (FSM) have been explored as a potential solution for enhancing solubility and permeability but are associated with rapid emulsification, spontaneous drug release, and poor in vivo correlation. To overcome the shortcoming, this study aimed to develop liquid and solid self-emulsifying drug delivery systems for FSM, compare formulation dynamics, continue in vivo therapeutic efficacy, and investigate the advantages of solidification. For this purpose, liquid SNEDDS (L-SEDDS-FSM) were formed using oleic acid as an oil, chremophore EL, Tween 80, Tween 20 as a surfactant, and PEG 400 as a co-surfactant containing 53 mg/mL FSM. At the same time, solid SNEDDS (S-SEDDS-FSM) was developed by adsorbing liquid SNEDDS onto microcrystalline cellulose in a 1:1 ratio. Both formulations were evaluated for size, zeta potential, lipase degradation, and drug release. Moreover, in vivo diuretic studies regarding urine volume were carried out in mice to investigate the therapeutic responses of liquid and solid SNEDDS formulations. After dilution, L-SEDDS-FSM showed a mean droplet size of 115 ± 4.5 nm, while S-SEDDS-FSM depicted 116 ± 2.6 nm and zeta potentials of -5.4 ± 0.55 and -6.22 ± 1.2, respectively. S-SEDDS-FSM showed 1.8-fold reduced degradation by lipase enzymes in comparison to L-SEDDS-FSM. S-SEDDS-FSM demonstrated a sustained drug release pattern, releasing 63% of the drug over 180 min, in contrast to L-SEDDS-FSM, exhibiting 90% spontaneous drug release within 30 min. L-SEDDS-FSM exhibited a rapid upsurge in urine output (1550 ± 56 µL) compared to S-SEDDS-FSM, showing gradual urine output (969 ± 29 µL) till the 4th h of the study, providing sustained urine output yet a predictable therapeutic response. The solidification of SNEDDS effectively addresses challenges associated with spontaneous drug release and precipitation observed in liquid SNEDDS, highlighting the potential benefits of solid SNEDDS in improving the therapeutic response of furosemide.

Chitosan-based materials for dental implantology: A comprehensive review.

Chitosan, a versatile biopolymer, has gained recognition in the discipline of dental implantology due to possessing salient properties. This comprehensive review explores the potential of chitosan in dental implants, focusing on its biocompatibility, bioactivity, and the various chitosan-based materials that have been utilized for dental implant therapy. The review also highlights the importance of surface treatment in dental implants to enhance osseointegration and inhibit bacterial biofilm formation. Additionally, the chemical structure, properties, and sources of chitosan are described, along with its different structural forms. The characteristics of chitosan particularly color, molecular weight, viscosity, and degree of deacetylation are discussed about their influence on its applications. This review provides valuable insights into the promising utilization of polymeric chitosan in enhancing the success and functionality of dental implants. This study highlights the potential applications of chitosan in oral implantology. Chitosan possesses various advantageous properties, including muco-adhesiveness, hemostatic action, biocompatibility, biodegradability, bioactivity, and antibacterial and antifungal activities, which enhance its uses in dental implantology. However, it has limited aqueous solubility at the physiological pH, which sometimes restricts its biological application, but this problem can be overcome by using modified chitosan or chitosan derivatives, which have also shown encouraging results. Recent research suggests that chitosan may act as a promising material for coating titanium-based implants, improving osteointegration together with antibacterial properties.

A bromide substituted 2D additive for stable and efficient perovskite photovoltaics.

In this article, a bromide substituted 2D layered perovskite having a repeated vertical orientation and coexisting with the bulk of a 3D perovskite is reported for the first time. This novel structure is obtained through controlled compositional engineering of the perovskite precursor solution. The photovoltaic performance of this novel 2D/3D perovskite was higher than that of 3D MAPbI3 and a maximum photoconversion efficiency (PCE) of 17.4% was achieved. The devices fabricated using this perovskite heterostructure were stable and retained their initial PCE up to 20 days when kept open in a laboratory environment with 40% relative humidity.

Transgenerational effects of pyriproxyfen in a field strain of Musca domestica L. (Diptera: Muscidae).

Musca domestica L. (Muscidae: Diptera) is a human and livestock pest especially in tropical and sub-tropical areas. Different insecticides have been used to control this pest that pose serious harmful effects on humans and the environment. The current study was planned to investigate the effects of two concentrations (LC25 and LC50) of pyriproxyfen on biological and population parameters of a field strain of M. domestica. The exposed parents (F0) and their progeny (F1) were studied to examine the transgenerational effects. The results indicated that preadult duration was higher in control (13.68 days) compared to LC50 treated individuals (12.44 days). The male and female longevity was relatively lower in the LC25 treated population i.e. 24.62 and 26.62 days, respectively. The adult pre-oviposition period (APOP) and total pre-oviposition period (TPOP) values were higher in the LC25 treated individuals than those of control. Moreover, oviposition days and fecundity were reduced in the treated individuals as compared to the control treatment. A gradual decrease in the net reproductive rate (R0) was observed (8.46-14.07 per day) while the value of R0 was significantly higher in control. The results suggested that pyriproxyfen can be effectively utilized and incorporated in the management programs of M. domestica.

Graphene Oxide Membrane Reactor for Electrochemical Deuteration Reactions.

The deuteration of organic molecules is considerably important in organic and medicinal chemistry. An electrochemical membrane reactor using proton-conducting graphene oxide (GO) nanosheets was developed to synthesize valuable deuterium-labeled products via an efficient hydrogen-to-deuterium (H/D) exchange under mild conditions at ambient temperature and atmospheric pressure. Deuterons (D+) formed by the anodic oxidation of heavy water (D2O) at the Pt/C anode permeate through the GO membrane to the Pt/C cathode, where organic molecules with functional groups (C≡C and C═O) are deuterated with adsorbed atomic D species. Deuteration occurs in outstanding yields with high levels of D incorporation. We also achieved the electrodeuteration of a drug molecule, ibuprofen, demonstrating the promising feasibility of the GO membrane reactor in the pharmaceutical industry.

The effect of fibroblast growth factor-2 on the outcomes of tooth replantation: A systematic review of animal studies.

Background/Aim: The ideal treatment of tooth avulsion is replantation. However, replanting teeth may lead to root resorption. Fibroblast growth factor-2 (FGF-2) is a cytokine that plays an important role in wound repair and tissue regeneration. Recently, FGF-2 has been studied a potential regenerative agent to prevent root resorption and ankylosis. The aim of this review is to analyze and summarize the currently available literature focusing on using FGF-2 based regenerative modalities to improve the outcomes of tooth replantation. Materials and Methods: An electronic search was conducted via PubMed/Medline, Google Scholar and ISI Web of Knowledge, using the Medical Subject Headings (MeSH) terms "Basic fibroblast growth factor," "Fibroblast growth factor-2," "tooth replantation," and "replantation" for studies published between January 2001 and June 2021. Data was extracted and quality assessment was carried using the ARRIVE guidelines. Results: Nine animal studies were included in this review. In six studies, FGF-2 had a favorable effect on the tissue regeneration around roots of replanted teeth when compared to other treatment groups. However, quality assessment of the studies revealed many sources of bias and deficiencies in the studies. Conclusions: Within the limitations of this study, it may be concluded that FGF-2 may improve the outcomes of delayed replantation of avulsed teeth. However, more long-term animal studies, with improved experimental designs, and clinical trials are required to determine the clinical potential of the growth factor in improving the outcomes of delayed tooth replantation.

Structural performance of FRP composite bars reinforced rubberized concrete compressive members: Tests and numerical modeling.

Waste tyre rubber has become an environmental and health concern that needs to be sustainably managed to avoid fire hazards and save natural resources. This research work aims to study the structural behavior of glass fiber reinforced polymer (glass-FRP) reinforced rubberized concrete (GRC) compressive elements under monotonic axial compression loads. Nine GRC circular compressive elements with different axial and crosswise reinforcement ratios were fabricated. All the elements were 300 mm in diameter and 1200 mm in height. A 3D nonlinear finite element equation (FEM) was suggested for the GRC compressive elements using a commercial package ABAQUS. A parametric study has been done to examine the effect of various parameters of GRC elements. The test outcomes revealed that the ductility of GRC elements ameliorated with the lessening in the spaces of glass-FRP ties. The addition of rubberized concrete improved the ductility of GRC elements. The damage to GRC elements occurred due to the vertical cracking along the height of the elements. The estimates of FEM were in close agreement with the test outcomes. The suggested empirical equation depending on the 600 test elements, which considered the lateral confinement effect of FRP ties, presented higher accuracy than previous equations.

Comparative Molecular Virulence Typing and Antibiotic Resistance of Campylobacter Species at the Human-Animal-Environment Interface.

This study holds significant importance due to its focus on Campylobacter, the leading bacterial cause of gastroenteritis worldwide, responsible for ∼96 million cases each year. By investigating the prevalence of both Campylobacter jejuni and Campylobacter coli in humans, animals, and the environment, this research sheds light on the broader impact of these pathogens, which can harm both human and animal populations. Traditional microbiological methods were implemented followed by optimized multiplex polymerase chain reaction targeting 16S rDNA and virulence gene markers by using specific primers. The findings revealed that a total of 219 Campylobacter isolates were recovered from 528 collected specimens from human, animal, and environmental sources. Campylobacter species showed a prevalence of 41.5%, with C. jejuni accounting for 53% and C. coli for 47%. Antimicrobial resistance rates were high, with tetracycline at 89%, ceftriaxone at 75%, cefotaxime at 70%, erythromycin at 69%, nalidixic acid at 54%, ciprofloxacin at 39%, and gentamicin at 23%. Commonly prevalent virulence-associated genes observed in the Campylobacter were cadF at 93%, flaA at 91%, cdtB at 88%, cheY at 86%, sodB at 78%, and iamA at 32%. The study confirmed multidrug-resistant Campylobacter prevalence at the human-animal-environment interface, harboring virulence-associated genes with potential harm to humans. Data analysis showed a nonsignificant (p ≥ 0.05) correlation between virulence genes and antibiotic susceptibility. To effectively manage Campylobacter infections, a multifaceted strategy incorporating preventative interventions at different levels is required. This strategy should take into account practicability, effectiveness, and sustainability while strengthening surveillance systems and addressing the economics of disease prevention.

High-Throughput Analysis of Leaf Chlorophyll Content in Aquaponically Grown Lettuce Using Hyperspectral Reflectance and RGB Images.

Chlorophyll content reflects plants' photosynthetic capacity, growth stage, and nitrogen status and is, therefore, of significant importance in precision agriculture. This study aims to develop a spectral and color vegetation indices-based model to estimate the chlorophyll content in aquaponically grown lettuce. A completely open-source automated machine learning (AutoML) framework (EvalML) was employed to develop the prediction models. The performance of AutoML along with four other standard machine learning models (back-propagation neural network (BPNN), partial least squares regression (PLSR), random forest (RF), and support vector machine (SVM) was compared. The most sensitive spectral (SVIs) and color vegetation indices (CVIs) for chlorophyll content were extracted and evaluated as reliable estimators of chlorophyll content. Using an ASD FieldSpec 4 Hi-Res spectroradiometer and a portable red, green, and blue (RGB) camera, 3600 hyperspectral reflectance measurements and 800 RGB images were acquired from lettuce grown across a gradient of nutrient levels. Ground measurements of leaf chlorophyll were acquired using an SPAD-502 m calibrated via laboratory chemical analyses. The results revealed a strong relationship between chlorophyll content and SPAD-502 readings, with an R2 of 0.95 and a correlation coefficient (r) of 0.975. The developed AutoML models outperformed all traditional models, yielding the highest values of the coefficient of determination in prediction (Rp2) for all vegetation indices (VIs). The combination of SVIs and CVIs achieved the best prediction accuracy with the highest Rp2 values ranging from 0.89 to 0.98, respectively. This study demonstrated the feasibility of spectral and color vegetation indices as estimators of chlorophyll content. Furthermore, the developed AutoML models can be integrated into embedded devices to control nutrient cycles in aquaponics systems.

The Role of Corticosteroids and Immunomodulatory Therapy in the Management of Infectious Uveitis.

PURPOSE: The index review aims to provide an update on the role of corticosteroids and steroid-sparing immunomodulatory therapy (IMT) in managing patients with infectious uveitis. METHOD: Narrative literature review. RESULTS: Corticosteroids and immunomodulatory therapy (IMT) focus on the host defense system instead of the pathogen, adjusting exaggerated inflammatory reactions to reduce potential harm to ocular tissues. Systemic or local corticosteroids are primarily selected as adjunctive medication for infectious uveitis. Concomitant corticosteroids have also been used in cases of paradoxical worsening in ocular tuberculosis and immune recovery uveitis in cytomegalovirus (CMV) retinitis. While there is no well-established evidence to support the use of IMT in infectious uveitis, it is occasionally used in clinical settings to treat persistent inflammation following resolution of infection such as cases of ocular tuberculosis and ocular syphilis where an insufficient response is observed with corticosteroids. CONCLUSION: There is no consensus on the position of immunomodulatory therapy in the management of infectious uveitis with different etiologies. The index review provides an overview of available adjunctive corticosteroids and IMT options to assist clinicians in managing such disease entities more efficiently.

Quantification of toxic heavy metals, trace elements and essential minerals contents in traditional herbal medicines commonly utilized in Khyber Pakhtunkhwa, Pakistan.

Traditional herbal medicines and health supplements have been empirically used to treat various disorders but most of them are not standardized and have not been experimentally validated for safety and efficacy. In the present study, various dosage forms of traditional herbal medicines prescribed for specific diseases were collected from local practitioners at different districts of Khyber Pakhtunkhwa, Pakistan. The collected samples were analyzed for heavy metal, trace elements, and minerals using atomic absorption spectroscopy. All the tested samples contained heavy metals, trace elements and minerals in different concentrations. All the samples were tested positive for the presence of toxic heavy metals such as arsenic (As), cadmium (Cd) and lead (Pb). The trace elements like cobalt (Co), iron (Fe), zinc (Zn) and chromium (Cr) were also detected in acceptable range. Similarly, the samples analyzed were rich in some of the essential minerals such as sodium (Na), magnesium (Mg) and calcium (Ca) which are necessary for the proper functioning of the body. The hazard quotient (HQ) values were measured for toxic heavy metals to determine their safe ranges for human body. The HQ values were above the permissible range for arsenic (As) in all detected samples while for cadmium (Cd) and lead (Pb), the values ware above in 50 % of the analyzed samples. The detection of toxic metals and their HQ values beyond the permissible limits in different dosage forms raised questions about their quality. This study suggests that evaluation of traditional herbal remedies for the metals contents and their standardization are strongly recommended for quality assurance and protection of public health.

Determination of Toxic Elements in Cannabinoid and Opioid Drugs and Their Impact on Addicts' Health: A Comparative Study.

Drug addiction is associated with significant health risks, including cardiovascular complications, cancer, and mental disorders. Illicit drugs, such as cannabinoids and opioids, including prescription medications, are widely consumed and have profound health consequences. Understanding the health effects of the toxic elements in these substances is critical for overdose prevention and effective recovery strategies. This study aimed to determine toxic elements, including arsenic (As), cadmium (Cd), mercury (Hg), and nickel (Ni), in cannabinoid and opioid drugs and in biological samples (whole blood, scalp hair, and serum) from 311 male drug abuse patients aged 15-60 years with a history of drug abuse. The participants were categorized into three age groups. The comparative analysis involved 113 reference subjects of the same age groups. The sample preparation employed microwave-assisted acid digestion, and the toxic elements were quantified using atomic absorption spectrophotometry. Accuracy was ensured using certified reference materials for hair, whole blood, and serum samples. Drug-addicted subjects had significantly higher concentrations of toxic elements (arsenic, cadmium, mercury, and nickel) in biological samples than referent subjects (p > 0.001). Elevated levels of these toxic elements may increase susceptibility to infections, possibly due to malnutrition, drug-related effects, and additional contaminants. These findings necessitate further studies to explore the long-term health outcomes, potential treatment options, and broader socioeconomic impacts of substance abuse. This study serves as a baseline for future research in this critical public health field.