ANN-GA optimized composite color protectant combined with magnetic field assisted freezing: Effects on the quality of mushroom (Agaricus bisporus).

Due to their high water content, frozen mushrooms (Agaricus bisporus) were greatly affected by ice crystal formation, which can lead to the destruction of tissue structure, serious browning, high juice loss, and difficulty in maintaining good sensory characteristics. In order to improve the quality of frozen Agaricus bisporus, this study employed Artificial neural network and genetic algorithm (ANN-GA) to optimize the amount of composite color protectant, and identified the optimal freezing conditions for freezing Agaricus bisporus by determining the freezing curves under different magnetic field-assisted freezing conditions, the color variance, texture and structure, drip loss, and distribution of moisture. Furthering, using X-ray µCT three dimensional images were taken to characterize the microstructure of the samples. Among them, the 6 mT magnetic field-assisted freezing treatment group was significantly better than the control group, and the results showed that the magnetic field-assisted freezing combined with chemical color protectant as a composite processing technology improved the quality of frozen Agaricus bisporus. This provides a theoretical basis and technical support for enhanced processing of frozen Agaricus bisporus.

Modulation of starch structure, swallowability and digestibility of 3D-printed diabetic-friendly food for the elderly by dry heating.

Elderly people often experience difficulty in swallowing and have impaired regulation of the nervous system. Furthermore, their blood glucose level can rise easily after eating. Therefore, functional foods that are easy to swallow and can maintain blood glucose at a lower level have been an important research topic in recent years. In this study, 3D printing was combined with dry heating to modify the starch in white quinoa and brown rice to develop whole grain foods with Osmanthus flavor that meet the dietary habits of the elderly. The samples were tested for printability, swallowing performance, and in vitro digestion. The results showed that after dry heating, all samples had shear-thinning properties and could pass through the extrusion nozzle of the printer smoothly. Both white quinoa and brown rice showed improved printability and self-support compared to the control. B45 (white quinoa, dry heating for 45 min) and C45 (brown rice, dry heating for 45 min) had significant elasticity and greater internal interaction strength during swallowing to resist disintegration of food particles during chewing. B45, C30, and C45, conformed to class 4 consistency and were characterized by easy swallowing of the diet. Further, dry heating resulted in greater resistance to enzymatic degradation of white quinoa and brown rice starch, with overall in vitro digestibility lower than the control.

3D/4D printed super reconstructed foods: Characteristics, research progress, and prospects.

Super reconstructed foods (SRFs) have characteristics beyond those of real system in terms of nutrition, texture, appearance, and other properties. As 3D/4D food printing technology continues to be improved in recent years, this layered manufacturing/additive manufacturing preparation technology based on food reconstruction has made it possible to continuously develop large-scale manufacture of SRFs. Compared with the traditional reconstructed foods, SRFs prepared using 3D/4D printing technologies are discussed comprehensively in this review. To meet the requirements of customers in terms of nutrition or other characteristics, multi-processing technologies are being combined with 3D/4D printing. Aspects of printing inks, product quality parameters, and recent progress in SRFs based on 3D/4D printing are assessed systematically and discussed critically. The potential for 3D/4D printed SRFs and the need for further research and developments in this area are presented and discussed critically. In addition to the natural materials which were initially suitable for 3D/4D printing, other derivative components have already been applied, which include hydrogels, polysaccharide-based materials, protein-based materials, and smart materials with distinctive characteristics. SRFs based on 3D/4D printing can retain the characteristics of deconstruction and reconstruction while also exhibiting quality parameters beyond those of the original material systems, such as variable rheological properties, on-demand texture, essential printability, improved microstructure, improved nutrition, and more appealing appearance. SRFs with 3D/4D printing are already widely used in foods such as simulated foods, staple foods, fermented foods, foods for people with special dietary needs, and foods made from food processingbyproducts.

A High-Efficiency Radio-Frequency-Assisted Hot-Air Drying Method for the Production of Restructured Bitter Melon and Apple Chips.

Nowadays, consumers are increasingly demanding processed food products with high levels of beneficial components. Bitter melon and apple are both nutritious foods rich in bioactive compounds. In this study, restructured bitter melon and apple chips were processed using four drying techniques: hot-air drying with/without exhaust air recirculation (EAR), and radio-frequency-assisted hot-air drying (RFHAD) with/without EAR. The drying characteristics, effective moisture diffusivity (Deff), specific energy consumption (SEC), total energy consumption (TEC), and some selected quality characteristics of the dehydrated chips were evaluated. The experimental results show that the application of radio frequency (RF) energy significantly facilitates water evaporation in the drying material, resulting in a significant (p < 0.05) reduction of drying duration by 31~39% over the experimental test parameters. The higher Deff values obtained from RFHAD and RFHAD + EAR were 6.062 × 10-9 to 6.889 × 10-9 m2/s, while lower SEC values ranged from 301.57 to 328.79 kW·h/kg. Furthermore, the dried products possessed better or fairly good quality (such as a lower color difference of 5.41~6.52, a lower shrinkage ratio of 18.24~19.13%, better antioxidant capacity, higher chlorophyll, total flavonoid, and total phenolic content, a lower polyphenol oxidase activity of 49.82~52.04 U·min-1g-1, smaller diameter and thickness changes, and a lower hardness of 27.75~30.48 N) compared to those of hot-air-dried chips. The combination of RF-assisted air drying and partial recirculating of dryer exhaust air achieved the highest saving in TEC of about 12.4%, along with a lower moisture absorption capacity and no deterioration of product quality attributes. This drying concept is therefore recommended for the industrial drying of several food materials.

Construction of photocatalytic coating for alleviating the shriveling of postharvest fruit cucumber after simulated transportation.

The shriveling of fruit cucumber was commonly occurred during supply chain, photocatalyst exposed to UV light can endow the coatings with ethylene removal capacity to reduce the respiration of fruit and water loss. The study developed a novel photodynamic technology responsive photocatalytic coating with exceptional ultraviolet (UV) photocatalytic degradation of ethylene ability to decay the shriveling of postharvest fruit cucumber during supply chain. This coating involved the integration of Carbon dots (CDs)-loaded nano ZnO and the skillful selection of pullulan (Pul) and apple pectin (AP) matrix. The CDs/ZnO coatings boasted an impressive array of photocatalytic degradation of ethylene and adhesion properties, including high ethylene removal rates of 32.04 % in 60 min UV light stimulation. The decrease of cell-wall strength, degradation of the cell wall polysaccharides and water loss resulted in cucumber shriveling. Compared with CK sample, after UV-CDs/ZnO coating treatment, the higher firmness and cell wall polysaccharides were found in cucumbers with lower cell wall degrading enzymes activities, weight loss and water movement, which was associated with the decrease of respiration and ethylene accumulation. The UV-CDs/ZnO coatings possessed promising potential for alleviating the shriveling of postharvest fruit cucumber and applications in fruits preservation in the future.

Improvement in the quality of frozen dough for fried flour products by electrostatic field-assisted freezing.

BACKGROUND: With the development of the food industry, frozen dough technology has gradually become an indispensable part of dough processing but its quality is often reduced due to freezing during the production process. Electrostatic field-assisted freezing (EF) technology, a key research project in recent years, reduces the physical damage to food materials by reducing or changing the size of ice crystals in frozen products. RESULTS: In this study, different intensities of electrostatic fields were used to assist in the repeated freezing and thawing of dough. The effects of electrostatic fields on the freezing nucleation process were evaluated by measuring dough freezing curves, low field nuclear magnetic resonance, and melting enthalpy. It was found that the freezing time of frozen dough added with electrostatic field-assisted freezing processing was shortened, the rate at which hardness, viscosity, and elasticity decreased was reduced, and the indicators of water distribution and protein secondary structure components were closer to those of fresh dough. CONCLUSION: This experiment used electrostatic field-assisted freezing to reduce the damage to the dough structure during the freezing process, improve the quality of frozen dough and fried products, and improve the freezing efficiency of frozen dough. It provides a new idea for the study of frozen dough. © 2023 Society of Chemical Industry.

Investigation of 3D printing of toddler foods with special shape and function based on fenugreek gum and flaxseed protein.

The practicability of using corn and flaxseed protein as printing inks for manufacture of printed products specifically designed for toddlers as a dysphagia diet with high precision and special shapes with addition of fenugreek gum (FGG) was investigated. 3D printing was used to process grains and dysphagia-compatible food (corn) into a dietary product with attractive appearance which was also easy to swallow. Rheological measurements shown that appropriate amount of flaxseed protein (FP, 0-10 %) can reduce the stickiness and yield strength of printing material. Based on FTIR measurements, FP weakened the hydrogen bond strength of inks, but it was still an important gradient for the formation of the ink suitable for precision 3D printing. The TPA results shown that the addition of FP (0-10 %) remarkably reduced both the stickiness and hardness of the ink. These results shown that compared with the control group, materials with FGG additions possessed higher printing accuracy and self-supporting ability. Ink with 5 % FP content exhibited the best printability and swallowability, while ink with 10 % FP content had the lowest viscosity and hardness, but it was not suitable for 3D printing. 3D printing of objects printed using Ink-C (5%FP and 0.8 %FGG) showed high support characteristic and attractive appearance. According to the international IDDSI testing standards, Ink-C (5%FP and 0.8 %FGG), Ink-E (15%FP and 0.8 %FGG), and Ink-F (20%FP and 0.8 %FGG) were defined as level 5-minced and moist foods.

Technological innovations enhance postharvest fresh food resilience from a supply chain perspective.

Fresh food is rich in nutrients but is usually seasonal, perishable, and challenging to store without degradation of quality. The inherent limitations of various preservation technologies can result in losses in all stages of the supply chain. As consumers of fresh foods have become more health-conscious, new technologies for intelligent, energy-efficient, and nondestructive preservation and processing have emerged as a research priority in recent years. This review aims to summarize the quality change characteristics of postharvest fruits, vegetables, meats, and aquatic products. It critically analyzes research progress and applications of various emerging technologies, which include: the application of high-voltage electric field, magnetic field, electromagnetic field, plasma, electrolytic water, nanotechnology, modified atmosphere packaging, and composite bio-coated film preservation technologies. An evaluation is presented of the benefits and drawbacks of these technologies, as well as future development trends. Moreover, this review provides guidance for design of the food supply chain to take advantage of various technologies used to process food, reduce losses and waste of fresh food, and this improve the overall resilience of the supply chain.

Technological advances in protein extraction, structure improvement and assembly, digestibility and bioavailability of plant-based foods.

Plant-based foods are being considered seriously to replace traditional animal-origin foods for various reasons. It is well known that animals release large amounts of greenhouse gases into the environment during feeding, and eating animal-origin foods may also cause some health problems. Moreover, animal resources will likely be in short supply as the world population grows. It is highly likely that serious health problems ascribed to insufficient protein intake in some areas of the world will occur. Studies have shown that environmentally friendly, abundant, and customizable plant-based foods can be an effective alternative to animal-based foods. However, currently, available plant-based foods lack nutrients unique to animal-based foods. Innovative processing technologies are needed to improve the nutritional value and functionality of plant-based foods and make them acceptable to a wider range of consumers. Therefore, protein extraction technologies (e.g., high-pressure extraction, ultrasound extraction, enzyme extraction, etc.), structure improvement and assembly technologies (3D printing, micro-encapsulation, etc.), and technologies to improve digestibility and utilization of bioactive substances (microbial fermentation, physical, etc.) in the field of plant-based foods processing are reviewed. The challenges of plant-based food processing technologies are summarized. The advanced technologies aim to help the food industry solve production problems using efficient, environmentally friendly, and economical processing technologies and to guide the development of plant-based foods in the future.

Consumer-oriented smart dynamic detection of fresh food quality: recent advances and future prospects.

Since fresh foods include a significant amount of water, fat, and protein, it is more likely to become infected by microorganisms causing a major loss of quality. Traditional detection techniques are less able to meet customer expectations owing to the limitations of high cost, slow response time, and inability to permit dynamic monitoring. Intelligent non-destructive detection technologies have emerged in recent years, which offer the advantages of small size and fast response at low cost. However, dynamic monitoring of fresh food quality based on intelligent detection technologies on the consumer side has not been rigorously evaluated yet. This paper discussed the application of intelligent detection technologies based on the consumer side in the dynamic monitoring of fresh food freshness, microorganisms, food additives, and pesticide residues. Furthermore, the application of intelligent detection technologies combined with smartphones for quality monitoring and detection of fresh foods is evaluated. Moreover, the challenges and development trends of intelligent fresh food quality detection technologies are also discussed. Intelligent detection technologies based on the consumer side are designed to detect in real-time the quality of fresh food through visual color changes in combination with smartphones. This paper provides ideas and recommendations for the application of intelligent detection technologies based on the consumer side in food quality detection/monitoring and future research trends.

Novel strategies for controlling nitrite content in prepared dishes: Current status, potential benefits, limitations and future challenges.

Sodium nitrite is commonly used as a multifunctional curing ingredient in the processing of prepared dishes, especially meat products, to impart unique color, flavor and to prolong the shelf life of such products. However, the use of sodium nitrite in the meat industry has been controversial due to potential health risks. Finding suitable substitutes for sodium nitrite and controlling nitrite residue have been a major challenge faced by the meat processing industry. This paper summarizes possible factors affecting the variation of nitrite content in the processing of prepared dishes. New strategies for controlling nitrite residues in meat dishes, including natural pre-converted nitrite, plant extracts, irradiation, non-thermal plasma and high hydrostatic pressure (HHP), are discussed in detail. The advantages and limitations of these strategies are also summarized. Raw materials, cooking techniques, packaging methods, and storage conditions all affect the content of nitrite in the prepared dishes. The use of vegetable pre-conversion nitrite and the addition of plant extracts can help reduce nitrite residues in meat products and meet the consumer demand for clean labeled meat products. Atmospheric pressure plasma, as a non-thermal pasteurization and curing process, is a promising meat processing technology. HHP has good bactericidal effect and is suitable for hurdle technology to limit the amount of sodium nitrite added. This review is intended to provide insights for the control of nitrite in the modern production of prepared dishes.

Double-nozzle 3D-printed bean paste buns: Effect of filling ratio and microwave heating time.

With the aggravation of the global aging process, more and more elderly people are facing the problem of dysphagia. The advantages of three-dimensional (3D) printing in making chewy food are increasingly prominent. In this study, the two-nozzle 3D printer was used to explore the effects of different proportions of buckwheat flour, printing filling ratio, microwave power, and time on the quality of bean-paste buns. The results showed that the bean paste filling containing 6% buckwheat flour had the best antioxidant and sensory properties. When the filling ratio was 21.6%, the microwave power was 560 W, and the time was 4 min, the obtained sample was the most satisfactory. Compared with the microwave-treated and steamed traditional samples, the chewiness of the samples was reduced by 52.43% and 15.14%, respectively, and the final product was easier to chew and swallow.

Sensing materials for fresh food quality deterioration measurement: a review of research progress and application in supply chain.

Fresh food are consumed in large quantities worldwide. During the supply chain, microbial growth in fresh food can lead to the production of a number of metabolites, which make food highly susceptible to spoilage and contamination. The quality of fresh food changes in terms of smell, tenderness, color and texture, which causes a decrease in freshness and consumers acceptance. Therefore, the quality monitoring of fresh food has become an essential part in the supply chain. As traditional analysis methods are highly specialized, expensive and have a small scope of application, which cannot be applied to the supply chain to realize real-time monitoring. Recently, sensing materials have received a lot of attention from researchers due to the low price, high sensitivity and high speed. However, the progress of research on sensing materials has not been critically evaluated. The study examines the progress of research in the application of sensing materials for fresh food quality monitoring. Meanwhile, indicator compounds for spoilage of fresh food are analyzed. Moreover, some suggestions for future research directions are given.

Feasibility of hydrocolloid addition for 3D printing of Qingtuan with red bean filling as a dysphagia food.

Glutinous rice flour, the main component of Qingtuan, has increased adhesiveness after gelatinization and hardness after aging; this results in great challenge in swallowing if for patients with dysphagia. Dual nozzle 3D printing has great potential for developing innovative Chinese pastries with fillings that conform to dysphagia diets. In this experimental study, the gelatinization and retrogradation behavior of glutinous rice starch was improved by designing printing inks of optimal properties made with different soluble soybean polysaccharide (SSPS) additions (0%, 0.3%, 0.6%, 0.9%). The internal structure of Qingtuan was modified by adjusting different filling densities (75%, 100%) in combination with the dual nozzle 3D printing. The objective of these tests was to enhance the texture of Qingtuan so that it meets the requirements of International Dysphagia Diet Standardization Initiative (IDDSI). The experimental results showed that 0.9% SSPS addition could effectively reduce the hardness and adhesiveness of the Qingtuan, which met the Level- 6 -soft & bite-sized standard while lower filling density lowers both hardness and adhesiveness.

Effects of electric and magnetic field on freezing characteristics of gel model food.

The novel freezing technologies including electrostatic field assisted freezing (EF), static magnetic field assisted freezing (MF), electrostatic field combined with static magnetic field assisted freezing (EMF) were conducted on model food to facilitate comparing their application effect. The results show that the effect of EMF treatment was best, which significantly changed the freezing parameters of the sample. Compared with the control, the phase transition time and total freezing time were shortened by 17.2% and 10.5%, respectively; the proportion of the sample free water content detected by low-field nuclear magnetic resonance was significantly decreased; the gel strength and hardness were significantly improved; the protein secondary and tertiary structures were better maintained; the ice crystal area was reduced by 49.28%. Inverted fluorescence and scanning electron microscopic results indicated that the gel structure of EMF treatment samples was better than MF and EF. MF was less effective in maintaining the quality of frozen gel model.

Effects of magnetic field-assisted liquid carbon dioxide spray freezing on the quality of honeydew melon.

The effectiveness of static magnetic fields with different intensities (5, 10, 15 mT) combined with liquid carbon dioxide spray freezing (LCSF) technique in improving the quality of frozen honeydew melon was investigated. The results showed that LCSF with magnetic fields above 10 mT significantly improved ice nucleation and quality of frozen melons compared to conventional -20 °C freezing, -80 °C freezing and LCSF method without magnetic field assistance (P < 0.05). 15 mT strength static magnetic field assistance suggested the best results, with a 15.0% reduction in total freezing time, 17.7% increase in average freezing rate, 26.6% reduction in drip loss, and better maintenance of sample quality compared to LCSF. These findings demonstrate that LCSF with static magnetic field assistance is promising in improving the quality of frozen foods.

Maillard reaction products of pea protein hydrolysate as a flavour enhancer for beef flavors: Effects on flavor and physicochemical properties.

This study evaluated the effects of Maillard reaction products of pea protein hydrolyzates (MRPs-PPH) as salt-reducing and umami-enhancing components on the flavor and physicochemical properties of beef flavors. The addition of MRPs-PPH reduced the brightness of beef flavors, increased the redness and yellowness, as well as changed the texture characteristics of beef flavors. With the addition of MRPs-PPH, the apparent viscosity, storage modulus and loss modulus of beef flavors decreased. Finally, the relationship between taste attributes and flavor compounds of the samples was analyzed by Partial Least Squares Regression (PLSR), and flavor compounds with significant positive contributions to different taste attributes were found. This study showed that MRPs-PPH could be used as a flavor enhancer derived from biomacromolecules with salt reduction and freshness enhancement.

Easy-to-swallow mooncake using 3D printing: Effect of oil and hydrocolloid addition.

3D printing is a promising technology for food production, capable of producing and developing personalized food products. In recent years, research on the application of 3D printing technology to create easy-to-swallow foods for the elderly with dysphagia has received extensive attention. In this study, we applied dual nozzle 3D printing technology to develop an easy-to-swallow mooncake food using a traditional Chinese food, mooncake, as a model system. We optimized the printing dough ink formulation by setting up soybean oil gradient experiments and Arabic gum gradient experiments, and then we applied the optimized dough ink as the crust of the mooncake to produce easy-to-swallow mooncakes. The experimental results show that the addition of 2.5 g of soybean oil and 0.125 g of Arabic gum could improve the texture of the dough product and reduce its hardness and adhesiveness. The mooncake produced with this crust dough ink was rated in the IDDSI texture level four, which met expectations. Therefore, this work provides insights into the development of easy-to-swallow food products.

Phototreatment (below 1100 nm) improving quality attributes of fresh-cut fruits and vegetables: A review.

The emerging area of phototreatment technology has shown a significant potential to enhance the quality of fresh-cut fruit and vegetable products (FFVP). This review critically evaluates relevant literatures to address the potential for phototreatment technology (Red, blue, green, ultraviolet and pulsed light) applied to FFVP, outline the key to the success of phototreatment processing, and discuss the corresponding problems for phototreatment processing along with research and development needs. Base on photothermal, photophysical and photochemical process, phototreatment displays a great potential to maintain quality attributes of FFVP. The operating parameters of light, the surface properties and matrix components of the targeted material and the equipment design affect the quality of the fresh-cut products. To adapt current phototreatment technology to industrial FFVP processing, it is necessary to offset some limitations, especially control of harmful substances (For example, nitrite and furan) produced by phototreatment, comparison between different phototreatment technologies, and establishment of mathematical models/databases.

New preservation and detection technologies for edible mushrooms: A review.

Edible mushrooms are nutritious, tasty, and have medicinal value, which makes them very popular. Fresh mushrooms have a high water content and a crisp texture. They demonstrate strong metabolic activity after harvesting. However, they are prone to textural changes, microbial infestation, and nutritional and flavor loss, and they therefore require appropriate post-harvest processing and preservation. Important factors affecting safety and quality during their processing and storage include their quality, source, microbial contamination, physical damage, and chemical residues. Thus, these aspects should be tested carefully to ensure safety. In recent years, many new techniques have been used to preserve mushrooms, including electrofluidic drying and cold plasma treatment, as well as new packaging and coating technologies. In terms of detection, many new detection techniques, such as nuclear magnetic resonance (NMR), imaging technology, and spectroscopy can be used as rapid and effective means of detection. This paper reviews the new technological methods for processing and detecting the quality of mainstream edible mushrooms. It mainly introduces their working principles and application, and highlights the future direction of preservation, processing, and quality detection technologies for edible mushrooms. Adopting appropriate post-harvest processing and preservation techniques can maintain the organoleptic properties, nutrition, and flavor of mushrooms effectively. The use of rapid, accurate, and non-destructive testing methods can provide a strong assurance of food safety. At present, these new processing, preservation and testing methods have achieved good results but at the same time there are certain shortcomings. So it is recommended that they also be continuously researched and improved, for example through the use of new technologies and combinations of different technologies. © 2023 Society of Chemical Industry.