Bowl-Shaped Kekulene Analogues: Cycloarenes with two Five-Membered Rings.

Kekulene, a cycloarene composed of 12 fused benzene rings in a circular arrangement, exhibits a highly planar and robust structure. Kekulene has been the subject of investigation into its aromaticity and electronic structure, particularly in relation to the cyclic benzenoid. We have successfully synthesized novel bowl-shaped kekulene analogues with five-membered rings incorporated into the kekulene structure. The results of DFT calculations and VT-NMR spectra indicate that inversion of their concave-convex structures occurs at room temperature. The NICS and AICD plots predict that the Clar's type resonance structure is found in a manner analogous to the pristine kekulene, albeit with the interruption of the π-conjugation on the sp3 carbons at the five-membered rings. Despite the presence of the Clar's resonance structure, the Diels-Alder reaction proceeded smoothly with a dienophile, in contrast to the behavior of planar kekulene derivatives. This study will lead to the creation of novel bowl-shaped compounds and development of reactivity in aromatic compounds.

Effect of Alloying Elements on the High-Temperature Yielding Behavior of Multicomponent γ'-L12 Alloys.

The exceptional mechanical properties of Ni-based high entropy alloys are due to the presence of ordered L12 (γ') precipitates embedded within a disordered matrix phase. While the strengthening contribution of the γ' phase is generally accepted, there is no consensus on the precise contribution of the individual strengthening mechanisms to the overall strength. In addition, changes in alloy composition influence several different mechanisms, making the assessment of alloying conditions complex. Multicomponent L12-ordered single-phase alloys were systematically developed with the aid of CALPHAD thermodynamic calculations. The alloying elements Co, Cr, Ti, and Nb were chosen to complexify the Ni3Al structure. The existence of the γ' single phase was validated by microstructure characterization and phase identification. A high-temperature compression test from 500 °C to 1000 °C revealed a positive temperature dependence of strength before reaching the peak strength in the studied alloys NiCoCrAl, NiCoCrAlTi, and NiCoCrAlNb. Ti and Nb alloying addition significantly enhanced the high-temperature yield strengths before the peak temperature. The yield strength was modeled by summing the individual effects of solid solution strengthening, grain boundary strengthening, order strengthening, and cross-slip-induced strengthening. Cross-slip-induced strengthening was shown to be the key contributor to the high-temperature strength enhancement.

Effect of serrated grain boundary on tensile and creep properties of a precipitation strengthened high entropy alloy.

In this study, tensile and creep deformation of a high-entropy alloy processed by selective laser melting (SLM) has been investigated; hot ductility drop was identified at first, and the loss of ductility at elevated temperature was associated with intergranular fracture. By modifying the grain boundary morphology from straight to serration, the hot ductility drop issue has been resolved successfully. The serrated grain boundary could be achieved by reducing the cooling rate of solution heat treatment, which allowed the coarsening of L12 structured γ' precipitates to interfere with mobile grain boundaries, resulting in undulation of the grain boundary morphology. Tensile and creep tests at 650°C were conducted, and serrated grain boundary could render a significant increase in tensile fracture strain and creep rupture life by a factor of 3.5 and 400, respectively. Detailed microstructure analysis has indicated that serrated grain boundary could distribute strains more evenly than that of straight morphology. The underlying mechanism of deformation with grain boundary serration was further demonstrated by molecular dynamic simulation, which has indicated that serrated grain boundaries could reduce local strain concentration and provide resistance against intergranular cracking. This is the first study to tackle the hot ductility drop issue in a high-entropy alloy fabricated by SLM; it can provide a guideline to develop future high-entropy alloys and design post heat treatment for elevated temperature applications.

Hierarchical microstructure strengthening in a single crystal high entropy superalloy.

A hierarchical microstructure strengthened high entropy superalloy (HESA) with superior cost specific yield strength from room temperature up to 1,023 K is presented. By phase transformation pathway through metastability, HESA possesses a hierarchical microstructure containing a dispersion of nano size disordered FCC particles inside ordered L12 precipitates that are within the FCC matrix. The average tensile yield strength of HESA from room temperature to 1,023 K could be 120 MPa higher than that of advanced single crystal superalloy, while HESA could still exhibit an elongation greater than 20%. Furthermore, the cost specific yield strength of HESA can be 8 times that of some superalloys. A template for lighter, stronger, cheaper, and more ductile high temperature alloy is proposed.

A strategy of designing high-entropy alloys with high-temperature shape memory effect.

Shape memory effect, the ability to recover a pre-deformed shape on heating, results from a reversible martensitic transformation between austenite and martensite phases. Here, we demonstrate a strategy of designing high-entropy alloys (HEAs) with high-temperature shape memory effect in the CrMnFeCoNi alloy system. First, we calculate the difference in Gibbs free energy between face-centered-cubic (FCC) and hexagonal-close-packed (HCP) phases, and find a substantial increase in thermodynamic equilibrium temperature between the FCC and HCP phases through composition tuning, leading to thermally- and stress-induced martensitic transformations. As a consequence, the shape recovery temperature in non-equiatomic CrMnFeCoNi alloys can be increased to 698 K, which is much higher than that of conventional shape memory alloys (SMAs) and comparable to that of B2-based multi-component SMAs containing noble metals (Pd, Pt, etc.) or refractory metals (Zr, Hf, etc.). This result opens a vast field of applications of HEAs as a novel class of cost-effective high-temperature SMAs.

An oxidation resistant refractory high entropy alloy protected by CrTaO4-based oxide.

Although refractory high entropy alloys (RHEAs) have shown potentials to be developed as structural materials for elevated temperature applications, most of the reported oxidation behaviours of RHEA were associated with short term exposures for only up to 48 hours, and there is a lack of understanding on the oxidation mechanism of any RHEA to-date. In this work, by using thermogravimetric analysis, isothermal oxidation was conducted on a novel RHEA at 1000 °C and 1100 °C for up to 200 hours, which is an unprecedented testing duration. The external oxide layer strongly influenced the weight gain behaviours, and it consisted of CrTaO4-based oxide with some dispersion of Al2O3 and Cr2O3. At 1000 °C, the inability to form dense CrTaO4-based oxide layer resulted an exponential dependence of weight gain throughout 200 hours. At 1100 °C, mass gain curve showed two parabolic dependences associated with the formation of protective CrTaO4-based oxide layer and the weight gain after 200 hours was 4.03 mg/cm2, which indicates that it is one of the most oxidation resistant RHEAs comparing to literature data to-date. This work can also provide insights on how to further develop RHEA to withstand long term oxidation at elevated temperatures.

The High Temperature Tensile and Creep Behaviors of High Entropy Superalloy.

This article presents the high temperature tensile and creep behaviors of a novel high entropy alloy (HEA). The microstructure of this HEA resembles that of advanced superalloys with a high entropy FCC matrix and L12 ordered precipitates, so it is also named as "high entropy superalloy (HESA)". The tensile yield strengths of HESA surpass those of the reported HEAs from room temperature to elevated temperatures; furthermore, its creep resistance at 982 °C can be compared to those of some Ni-based superalloys. Analysis on experimental results indicate that HESA could be strengthened by the low stacking-fault energy of the matrix, high anti-phase boundary energy of the strengthening precipitate, and thermally stable microstructure. Positive misfit between FCC matrix and precipitate has yielded parallel raft microstructure during creep at 982 °C, and the creep curves of HESA were dominated by tertiary creep behavior. To the best of authors' knowledge, this article is the first to present the elevated temperature tensile creep study on full scale specimens of a high entropy alloy, and the potential of HESA for high temperature structural application is discussed.

Synthesis and electrocatalytic performance of atomically ordered nickel carbide (Ni3C) nanoparticles.

Atomically ordered nickel carbide, Ni3C, was synthesized by reduction of nickel cyclopentadienyl (NiCp2) with sodium naphthalide to form Ni clusters coordinated by Cp (Ni-Cp clusters). Ni-Cp clusters were thermally decomposed to Ni3C nanoparticles smaller than 10 nm. The Ni3C nanoparticles showed better performance than Ni nanoparticles and Au nanoparticles in the electrooxidation of sodium borohydride.

Nanostructured LaB6 field emitter with lowest apical work function.

LaB(6) nanowires are ideal for applications as an electrical field-induced ion and electron point source due to their miniature dimensions, low work function, as well as excellent electrical, thermal, and mechanical properties. We present here a reliable method to fabricate and assemble single LaB(6) nanowire-based field emitters of different crystal orientations. The atomic arrangement, emission brightness from each crystal plane, and field emission stability have been characterized using field ion microscopy (FIM) and field emission microscopy (FEM). It is found that the 001 oriented LaB(6) nanowire emitter has the highest field emission symmetry while the 012 oriented LaB(6) nanowire has the lowest apical work function. The field emission stability from the single LaB(6) nanowire emitter is significantly better than either the LaB(6) needle-type emitter or W cold field emitters.

Syntheses, molecular structures and pH-dependent monomer-dimer equilibria of Dawson alpha2-monotitanium(IV)-substituted polyoxometalates.

The preparation and structural characterization of a novel, solid Brønsted acid based on Dawson alpha2-monotitanium(IV)-substituted polyoxometalates (POMs) are described. The free-acid form of the POM, i.e., 13H+-heteropolyacid with the formula H13[1b].55H2O DH-1 (1b = [(alpha2-P2W17TiO61)(alpha2-P2W17TiO61H)(mu-O)]13-), was prepared by passing an aqueous solution containing a potassium salt precursor, K14[1a].17H2O DK-1 (1a=[(alpha2-P2W17TiO61)2(mu-O)]14-), through a cation-exchange resin column. Compound DK-1 was obtained by a stoichiometric reaction of mono-lacunary Dawson POM [alpha2-P2W17O61]10- with Ti(SO4)2 in an aqueous solution. [Note: the abbreviations D, M, K and H stand for dimer, monomer, potassium salt and free-acid form, respectively.] Compounds DK-1 and DH-1 were characterized by using complete elemental analysis, thermogravimetric (TG) and differential thermal analysis (DTA), FTIR, solution (31P and 183W) NMR spectroscopy, pH-varied 31P NMR spectroscopy, solid-state 31P CPMAS NMR, X-ray crystallography and acidity measurements in an organic solvent with a Hammett indicator for DH-1. The monomeric form, K8[alpha2-P2W17TiO62]. 18H2O MK-1, was derived from DK-1. The molecular structure of 1b was composed of a dimer connected through one Ti-O-Ti bond between two alpha2-mono-Ti(IV)-substituted Dawson POM subunits. BVS (bond valence sum) calculation showed that one oxygen atom (O(60A)) in one of the two Dawson subunits was protonated, therefore the two subunits were unequivalent. On the other hand, the molecular structure of la was a Ti-O-Ti bonding dimer of two equivalent Dawson subunits. The pH-varied 31P NMR spectra of DK-1 and DH-1 in aqueous solutions showed that the monomer at pH 7.0, the dimer at pH 1.0-3.0, and the mono-protonated species of the dimer at pH 0.5 were the predominant species in the solutions. The Hammett acidity constant (H0) of DH-1 in CH3CN (-2.87) was estimated to be almost the same as that of homo-Dawson heteropolyacid H6[P2W18O62].17H2O(-2.77).

Synthesis, reaction and structure of a highly light-stable silver(I) cluster with an Ag4S4N4 core having a tridentate 4N-morpholyl 2-acetylpyridine thiosemicarbazone ligand: use of water-soluble silver(I) carboxylates as a silver(I) source.

A novel neutral tetrameric silver(I) cluster [Ag(mtsc)](4) was obtained from reactions of a tridentate (4)N-morpholyl 2-acetylpyridine thiosemicarbazone ligand (N'-[1-(2-pyridyl)ethylidene] morpholine-4-carbothiohydrazide, Hmtsc) and silver(I) sources containing Ag-O bonds (Ag(2)O, Ag(OAc), silver(I) 2-pyrrolidone-5-carboxylate (infinity){[Ag(Hpyrrld)](2)}, silver(I) 5-oxo-2-tetrahydrofurancarboxylate (infinity){[Ag(othf)](2)}, and silver(I) complexes with camphanic acid (infinity){[Ag(ca)]} and (infinity){[Ag(ca)(Hca)]}). The cluster was characterized by elemental analysis, TG/DTA, FTIR and single-crystal X-ray analysis in the solid state. The solution properties of the complexes were investigated using solution molecular weight measurement, ESI-MS and solution ((1)H, (13)C and (31)P) NMR spectroscopy. The obtained cluster is a novel example of a light-stable Ag(I) cluster with a tridentate thiosemicarbazone ligand and the second report of a crystal structure of a thiosemicarbazone silver(I) complex. The reaction of the tetramer with a large excess of PPh(3) gave dimeric complexes, namely, [Ag(micro(S)-mtsc)(PPh(3))](2) and [(PPh(3))(2)Ag(micro(S)-mtsc)(2)Ag]. The chloroform solution of the tetrameric complex showed modest and effective activities against selected bacteria (Bacillus subtilis, Staphylococcus aureus and Pseudomonas aeruginosa) and yeasts (Candida albicans and Saccharomyces cerevisiae), respectively, but it did not inhibit the growth of any selected microorganisms in a water-suspension system.

Novel Ti-O-Ti bonding species constructed in a metal-oxide cluster: reaction products of bis(oxalato)oxotitanate(IV) with the dimeric, 1,2-dititanium(IV)-substituted Keggin polyoxotungstate.

The preparation and structural characterization of a novel Ti-O-Ti bonding complex constructed in a dilacunary alpha-Keggin polyoxometalate (POM), [[{Ti(ox)(H2O)}4(mu-O)3](alpha-PW10O37)](7-) (H2ox = oxalic acid) (1a), are described. The water-soluble, crystalline complex with a formula of K6H[1a].0.5KCl.10H2O (1p) was prepared as the bulk sample in 28.0% (0.51 g scale) yield in a 1:4 molar-ratio reaction of the dititanium(IV)-substituted, dimeric form of an alpha-Keggin POM, K10[(alpha-1,2-PW10Ti2O39)2].18H2O, with the titanium(IV) source K2[TiO(ox)2].2H2O in HCl-acidic solution (pH 0.08). Prior to formation of 1p, the KCl-free crystalline compound (1c) obtained was characterized with X-ray crystallography. The compound 1p was unequivocally characterized with complete elemental analysis, thermogravimetric and differential thermal analyses (TG/DTA), FTIR, and solution (31P, 183W, and 13C) NMR spectroscopy. The molecular structure of 1a was determined. The POM 1a in the solid state was composed of the four octahedral Ti groups (four guests), i.e., the two Ti-O-Ti groups linked with the mu-O atom, incorporated to the two adjacent, octahedral vacant sites (two hosts) in the dilacunary Keggin POM. The formation of 1a, as well as the recently found POM [{Ti(ox)(H2O)}2(mu-O)](alpha-PW11O39)](5-) (2a), was strongly dependent on the reaction with [TiO(ox)2](2-), i.e., the anionic titanium(IV) complex as the titanium(IV) source. The POM 1a is contrasted to most titanium(IV)-substituted POMs consisting of a combination of a monolacunary site (one host) and an octahedral Ti group (one guest) and also contrasted to 2a as a combination of a monolacunary site (one host) and two octahedral Ti groups or a Ti-O-Ti group (two guests).

Long-term outcome after primary stenting versus balloon angioplasty for acute myocardial infarction.

The objective of the present prospective multicenter case-control study was to investigate the long-term clinical outcome (5 years) of primary stenting compared to primary percutaneous transluminal coronary angioplasty (PTCA) without stenting (POBA) in patients with acute myocardial infarction at 7 cardiovascular centers in Hokkaido, Japan. Forty-one patients with acute myocardial infarction treated with successful primary stenting (stent group: case) and paired with 41 matched control subjects with acute myocardial infarction treated by successful primary PTCA without stenting (POBA group: control) were analyzed. After 1 year, the stent group had a lower incidence of the combined clinical endpoint (death, rehospitalization due to congestive heart failure, nonfatal myocardial infarction, repeat angioplasty, CABG, or cerebrovascular events) compared to the POBA group (17.1% versus 39.0%, P = 0.049). After 5 years, the incidences of congestive heart failure and cardiac death were the same in both groups. However, compared to the POBA group, the stent group had a lower combined clinical endpoint (34.1% versus 61.0%, P = 0.027). The Kaplan-Meier event-free survival curves of the stent group showed a significantly lower occurrence of clinical events compared to the POBA group (P = 0.0116). Multiple logistic regression analysis of clinical events identified age > or = 69 years (P = 0.0092, odds ratio = 4.179) and stenting (P = 0.0158, odds ratio = 0.279) as explanatory factors. Compared with POBA, primary stenting for acute myocardial infarction results in a better long-term clinical outcome.

Kallikrein/kinin protects against gentamicin-induced nephrotoxicity by inhibition of inflammation and apoptosis.

BACKGROUND: Our previous study showed that kallikrein gene transfer protects against gentamicin-induced nephrotoxicity and enhances renal function. In this study, we investigated the effects and potential mechanisms of kallikrein/kinin on inflammation and apoptosis induced by gentamicin. METHODS: Rats were injected subcutaneously with gentamicin daily for 10 days and received an intravenous injection of adenovirus carrying the human tissue kallikrein gene or control virus on the first day of gentamicin administration. RESULTS: After 10 days of gentamicin treatment, kallikrein gene transfer significantly attenuated gentamicin-induced tubular dilatation and lumenal protein casts. Moreover, kallikrein gene transfer reduced monocyte/macrophage infiltration, monocyte chemoattractant peptide-1 expression and renal cell apoptosis. Kallikrein's protective effects were accompanied by increased nitric oxide formation, and reduced NADH oxidase activity and superoxide production. Suppression of oxidative stress was associated with diminished c-jun N-terminal kinase activation and intercellular adhesion molecule-1 and transforming growth factor-beta protein levels. These biochemical effects were blocked by icatibant, indicating a kinin B2 receptor-mediated signalling event. CONCLUSIONS: This study indicates that kallikrein/kinin protects against gentamicin-induced nephrotoxicity by inhibiting inflammatory cell recruitment and apoptosis through suppression of oxidative stress-mediated signalling pathways. These findings raise the potential of applying kallikrein therapy approaches in treating aminoglycoside-induced renal damage.

Low adiponectin level in young normotensive men with a family history of essential hypertension.

Circulating level of adiponectin, an adipocyte-derived protein, is reduced in states of insulin resistance such as obesity and type 2 diabetes. We have previously shown that hypoadiponectinemia is related to insulin resistance in essential hypertension. Recent studies have shown that normotensive subjects with a positive family history of essential hypertension (FH+) have decreased insulin sensitivity compared to subjects with a negative family history of essential hypertension (FH-). We here examined the association between adiponectin concentration and insulin sensitivity in FH+ and FH-. Thirty young, non-obese and normotensive men without a family history of diabetes mellitus were enrolled. A total of 15 subjects were FH+, and the remaining 15 subjects were FH-. Insulin sensitivity index (ISI) was evaluated by the euglycemic hyperinsulinemic glucose clamp technique. Concentrations of adiponectin and other metabolic variables were measured. The FH+ group had significantly lower levels of ISI and adiponectin than did the FH- group. In all of the subjects, ISI was positively correlated with adiponectin concentration and high-density lipoprotein (HDL) cholesterol level and was negatively correlated with insulin level. Adiponectin concentration was the only independent determinant of ISI in a multiple regression analysis. Our results showed that adiponectin level was significantly decreased and that this was accompanied by reduced insulin sensitivity in young, nonobese and normotensive men with a family history of essential hypertension. Phenotype of reduced adiponectin level as an earlier penetrance may be especially useful in genetic analyses of insulin resistance and essential hypertension.

Olmesartan ameliorates insulin sensitivity by modulating tumor necrosis factor-alpha and cyclic AMP in skeletal muscle.

We have reported that tumor necrosis factor (TNF)-alpha in skeletal muscle is one of the determinants of insulin resistance and that the renin-angiotensin system may be related to the regulation of TNF-a in skeletal muscle. Recent studies have suggested the involvement of cyclic adenosine monophosphate (cAMP) in the regulation of TNF-a in vascular smooth muscle cells or monocytes. The aim of this study was to determine the relationship between cAMP and TNF-a in skeletal muscle in connection with the renin-angiotensin system. Six-week-old male Sprague-Dawley rats were fed either normal rat chow or fructose-rich chow for 6 weeks. For the last 2 weeks of a 6-week period, the rats were treated with a vehicle or with an angiotensin II type 1 receptor antagonist (olmesartan medoxomil, 0.1 mg/kg/day). TNF-alpha levels in the soleus muscle were significantly higher and cAMP levels in the soleus muscle were significantly lower in fructose-fed rats than in control rats. Olmesartan increased cAMP and reduced TNF-a simultaneously in fructose-fed rats. There was a significant negative correlation between levels of cAMP and TNF-alpha. Moreover, a cAMP analogue reduced TNF-a levels in the soleus muscle. These results indicate that the increase in TNF-alpha via suppression of cAMP may affect the induction of insulin resistance. In addition, the facts that olmesartan increased cAMP and decreased TNF-alpha suggest that a part of the TNF-alpha regulation by angiotensin II might consist of modulation of cAMP through Gi protein activation in skeletal muscle.