The therapeutic efficacy of silver loaded rhenium disulfide nanoparticles as a photothermal agent for cancer eradication.

Cancer is a life-threatening disease when it is diagnosed at a late stage or treatment procedures fail. Inhibiting cancer cells in the tumor environment is a significant challenge for anticancer therapy. The photothermal effects of nanomaterials are being studied as a new cancer treatment. In this work, rhenium disulfide (ReS2) nanosheets were made by liquid exfoliation with gum arabic (GA) and coated with silver nanoparticles (AgNPs) to produce reactive oxygen species that destroy cancer cells. The synthesized AgNP-GA-ReS2 NPs were characterized using UV, DLS, SEM, TEM, and photothermal studies. According to the DLS findings, the NPs were about 216 nm in size and had a zeta potential of 76 mV. The TEM and SEM analyses revealed that the GA-ReS2 formed single-layered nanosheets on which the AgNPs were distributed. The photothermal effects of the AgNP-GA-ReS2 NPs at 50 µg/mL were tested with an 808 nm laser at 1.2 W cm-2, and they reached 55.8 °C after 5 min of laser irradiation. MBA-MB-231 cells were used to test the cytotoxicity of the newly designed AgNP-GA-ReS2 NPs with and without laser irradiation for 5 min. At 50 µg/mL, the AgNP-GA-ReS2 showed cytotoxicity, which was confirmed with calcein and EtBr staining. The DCFH-DA and flow cytometry analyses demonstrated that AgNP-GA-ReS2 nanosheets under NIR irradiation generated ROS with high anticancer activity, in addition to the photothermal effects.

Fabrication and characterizations of simvastatin-containing mesoporous bioactive glass and molybdenum disulfide scaffold for bone tissue engineering.

Due to the limitations of the current treatment approaches of allograft and autograft techniques, treating bone disorders is a significant challenge. To address these shortcomings, a novel biomaterial composite is required. This study presents the preparation and fabrication of a novel biomaterial composite scaffold that combines poly (D, L-lactide-co-glycolide) (PLGA), mesoporous bioactive glass (MBG), molybdenum disulfide (MoS2), and simvastatin (Sim) to address the limitations of current bone grafting techniques of autograft and allograft. The fabricated scaffold of PLGA-MBG-MoS2-Sim composites was developed using a low-cost hydraulic press and salt leaching method, and scanning electron microscopy (SEM) analysis confirmed the scaffolds have a pore size between 143 and 240 µm. The protein adsorption for fabricated scaffolds was increased at 24 h. The water adsorption and retention studies showed significant results on the PLGA-MBG-MoS2-Sim composite scaffold. The biodegradation studies of the PLGA-MBG-MoS2-Sim composite scaffold have shown 54% after 28 days. In vitro, bioactivity evaluation utilizing simulated body fluid studies confirmed the development of bone mineral hydroxyapatite on the scaffolds, which was characterized using x-ray diffraction, Fourier transform infrared, and SEM analysis. Furthermore, the PLGA-MBG-MoS2-Sim composite scaffold is biocompatible with C3H10T1/2 cells and expresses more alkaline phosphatase and mineralization activity. Additionally, in vivo research showed that PLGA-MBG-MoS2-Sim stimulates a higher rate of bone regeneration. These findings highlight the fabricated PLGA-MBG-MoS2-Sim composite scaffold presents a promising solution for the limitations of current bone grafting techniques.

Casein-assisted exfoliation of tungsten disulfide nanosheets for biomedical applications.

Our regular life can be more challenging by bone abnormalities. Bone tissue engineering is used for repairing, regenerating, or replacing bone tissue that has been injured or infected. It is effective in overcoming the drawbacks of conventional bone grafting methods like autograft and allograft by enhancing the effectiveness of bone regeneration. Recent discoveries have shown that the exfoliation of transition metal dichalcogenides (TMDs) with protein is in great demand for bone tissue engineering applications. WS2 nanosheets were developed using casein and subsequently characterized with different analytical techniques. Strong absorption peaks were observed in the UV-visible spectra at 520 nm and 630 nm. Alginate and alginate-casein WS2 microspheres were developed. Stereomicroscopic images of the microspheres are spherical in shape and have an average diameter of around 0.8 ± 0.2 mm. The alginate-casein WS2 microspheres show higher content of water absorption and retention properties than only alginate-containing microspheres. The apatite formation in the simulated bodily fluid solution was facilitated more effectively by the alginate-casein-WS2 microspheres. Additionally, alginate-casein-WS2 microspheres have a compressive strength is 58.01 ± 4 MPa. Finally, in vitro cell interaction studies reveals that both the microspheres are biocompatible with the C3H10T1/2 cells, and alginate-casein-WS2-based microspheres promote cell growth more significantly. Alginate-casein-WS2 microspheres promote alkaline phosphatase activity, and mineralization process. Additionally, alginate-casein-WS2-based microspheres exponentially enhance the genes for ALP, BMP-2, OCN, and Collage type-1. The produced alginate-casein-WS2 microspheres could be a suitable synthetic graft for a bone transplant replacement.

Biomimetic chitosan with biocomposite nanomaterials for bone tissue repair and regeneration.

Biomimetic materials for better bone graft substitutes are a thrust area of research among researchers and clinicians. Autografts, allografts, and synthetic grafts are often utilized to repair and regenerate bone defects. Autografts are still considered the gold-standard method/material to treat bone-related issues with satisfactory outcomes. It is important that the material used for bone tissue repair is simultaneously osteoconductive, osteoinductive, and osteogenic. To overcome this problem, researchers have tried several ways to develop different materials using chitosan-based nanocomposites of silver, copper, gold, zinc oxide, titanium oxide, carbon nanotubes, graphene oxide, and biosilica. The combination of materials helps in the expression of ideal bone formation genes of alkaline phosphatase, bone morphogenic protein, runt-related transcription factor-2, bone sialoprotein, and osteocalcin. In vitro and in vivo studies highlight the scientific findings of antibacterial activity, tissue integration, stiffness, mechanical strength, and degradation behaviour of composite materials for tissue engineering applications.

Fucoidan-based nanoparticles: Preparations and applications.

Nanoparticle-based therapy has gained much attention in the pharmaceutical industry. Fucoidan is a sulfated polysaccharide naturally derived from marine brown algae and is widely used for medical applications. We explore preparation of fucoidan-based nanoparticles and their biomedical applications in the current review. The fucoidan-based nanoparticles have been synthesized using microwave, emulsion, solvent evaporation, green synthesis, polyelectrolyte self-assembly, precipitation, and ultrasonication methods. The synthesized nanoparticles have particle sizes ranging from 100 to 400 nm. Therefore, fucoidan-based nanoparticles have a variety of potential therapeutic applications, including drug delivery, cancer therapies, tissue engineering, antimicrobial applications, magnetic resonance imaging contrast, and atherothrombosis imaging. For example, fucoidan nanoparticles have been used to deliver curcumin, dextran, gentamicin, epigallocatechin gallate, and cisplatin for cancer therapies. Furthermore, fucoidan nanoparticles coupled with metal nanoparticles have been used to target and recognize clinical conditions for diagnostic purposes. Hence, fucoidan-based nanoparticles have been helpful for biomedical applications.

Alginate-based Composite Microspheres: Preparations and Applications for Bone Tissue Engineering.

Alginate-based biomaterials have been extensively studied for bone tissue engineering. Scaffolds, microspheres, and hydrogels can be developed using alginate, which is biocompatible, biodegradable, and able to deliver growth factors and drugs. Alginate microspheres can be produced using crosslinking, microfluidic, three-dimensional printing, extrusion, and emulsion methods. The sizes of the alginate microspheres range from 10 µm to 4 mm. This review describes the chemical characterization and mechanical assessment of alginatebased microspheres. Combinations of alginate with hydroxyapatite, chitosan, collagen, polylactic acid, polycaprolactone, and bioglass were discussed for bone tissue repair and regeneration. In addition, alginate combinations with bone morphogenetic proteins, vascular endothelial growth factor, transforming growth factor beta- 3, other growth factors, cells, proteins, drugs, and osteoinductive drugs were analyzed for tissue engineering applications. Furthermore, the biocompatibility of developed alginate microspheres was discussed for different cell lines. Finally, alginate microsphere-based composites with stem cell interaction for bone tissue regeneration were presented. In the present review, we have assessed the preclinical research on in vivo models of alginatebased microspheres for bone tissue repair and regeneration. Overall, alginate-based microspheres are potential candidates for graft substitutes and the treatment of various bone-related diseases.