Recent developments in microplastic contaminated water treatment: Progress and prospects of carbon-based two-dimensional materials for membranes separation.

Micro (nano)plastics pollution is a noxious menace not only for mankind but also for marine life, as removing microplastics (MPs) is challenging due to their physiochemical properties, composition, and response toward salinity and pH. This review provides a detailed assessment of the MPs pollution in different water types, environmental implications, and corresponding treatment strategies. With the advancement in nanotechnology, mitigation strategies for aqueous pollution are seen, especially due to the fabrication of nanosheets/membranes mostly utilized as a filtration process. Two-dimensional (2D) materials are increasingly used for membranes due to their diverse structure, affinity, cost-effectiveness, and, most importantly, removal efficiency. The popular 2D materials used for membrane-based organic and inorganic pollutants from water mainly include graphene and MXenes however their effectiveness for MPs removal is still in its infancy. Albeit, the available literature asserts a 70- 99% success rate in micro/nano plastics removal achieved through membranes fabricated via graphene oxide (GO), reduced graphene oxide (rGO) and MXene membranes. This review examined existing membrane separation strategies for MPs removal, focusing on the structural properties of 2D materials, composite, and how they adsorb pollutants and underlying physicochemical mechanisms. Since MPs and other contaminants commonly coexist in the natural environment, a brief examination of the response of 2D membranes to MPs removal was also conducted. In addition, the influencing factors regulate MPs removal performance of membranes by impacting their two main operating routes (filtration and adsorption). Finally, significant limitations, research gaps, and future prospects of 2D material-based membranes for effectively removing MPs are also proposed. The conclusion is that the success of 2D material is strongly linked to the types, size of MPs, and characteristics of aqueous media. Future perspectives talk about the problems that need to be solved to get 2D material-based membranes out of the lab and onto the market.

Ultrahigh Energy and Power Densities of d-MXene-Based Symmetric Supercapacitors.

Here, rational design electrodes are fabricated by mixing MXene with an aqueous solution of chloroauric acid (HAuCl4). In order to prevent MXene from self-restacking, the groups of -OH on the surface of Ti3C2Tx nanosheets underwent a one-step simultaneous self-reduction from AuCl4-, generating spaces for rapid ion transit. Additionally, by using this procedure, MXene's surface oxidation can be decreased while preserving its physio-chemical properties. The interlayered MX/Au NPs that have been obtained are combined into a conducting network structure that offers more active electrochemical sites and improved mass transfer at the electrode-electrolyte interface, both of which promote quick electron transfer during electrochemical reactions and excellent structural durability. The Ti3C2Tx-AuNPs film thus demonstrated a rate performance that was preferable to that of pure Ti3C2Tx film. According to the results of the characterization, the AuNPs effectively adorn the MXene nanosheets. Due to the renowned pseudocapacitance charge storage mechanism, MXene-based electrode materials also work well as supercapacitors in sulfuric acid, which is why MXene AuNPs electrodes have been tested in 3 M and 1 M H2SO4. The symmetric supercapacitors made of MXene and AuNPs have shown exceptional specific capacitance of 696.67 Fg-1 at 5 mVs-1 in 3 M H2SO4 electrolyte, and they can sustain 90% of their original capacitance for 5000 cycles. The highest energy and power density of this device, which operates within a 1.2 V potential window, are 138.4 Wh kg-1 and 2076 W kg-1, respectively. These findings offer a productive method for creating high-performance metal oxide-based symmetric capacitors and a straightforward, workable approach for improving MXene-based electrode designs, which can be applied to other electro-chemical systems that are ion transport-restricted, such as metal ion batteries and catalysis.

Next-generation graphene oxide additives composite membranes for emerging organic micropollutants removal: Separation, adsorption and degradation.

In the past two decades, membrane technology has attracted considerable interest as a viable and promising method for water purification. Emerging organic micropollutants (EOMPs) in wastewater have trace, persistent, highly variable quantities and types, develop hazardous intermediates and are diffusible. These primary issues affect EOMPs polluted wastewater on an industrial scale differently than in a lab, challenging membranes-based EOMP removal. Graphene oxide (GO) promises state-of-the-art membrane synthesis technologies and use in EOMPs removal systems due to its superior physicochemical, mechanical, and electrical qualities and high oxygen content. This critical review highlights the recent advancements in the synthesis of next-generation GO membranes with diverse membrane substrates such as ceramic, polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The EOMPs removal efficiencies of GO membranes in filtration, adsorption (incorporated with metal, nanomaterial in biodegradable polymer and biomimetic membranes), and degradation (in catalytic, photo-Fenton, photocatalytic and electrocatalytic membranes) and corresponding removal mechanisms of different EOMPs are also depicted. GO-assisted water treatment strategies were further assessed by various influencing factors, including applied water flow mode and membrane properties (e.g., permeability, hydrophily, mechanical stability, and fouling). GO additive membranes showed better permeability, hydrophilicity, high water flux, and fouling resistance than pristine membranes. Likewise, degradation combined with filtration is two times more effective than alone, while crossflow mode improves the photocatalytic degradation performance of the system. GO integration in polymer membranes enhances their stability, facilitates photocatalytic processes, and gravity-driven GO membranes enable filtration of pollutants at low pressure, making membrane filtration more inexpensive. However, simultaneous removal of multiple contaminants with contrasting characteristics and variable efficiencies in different systems demands further optimization in GO-mediated membranes. This review concludes with identifying future critical research directions to promote research for determining the GO-assisted OMPs removal membrane technology nexus and maximizing this technique for industrial application.

PDMS-Encapsulated MXene@Polyester Fabric Strain Sensor for Multifunctional Sensing Applications.

Flexible strain sensors based on 2D materials have been proven effective for wearable health monitoring devices, human motion detection, and fitness applications. These sensors are flexible, light, and user-friendly, but their sensitivity and detection range need to be enhanced. Among many 2D materials, MXene attracts much interest due to its remarkable properties, such as high electrical conductivity, excellent mechanical properties, flexibility, and good hydrophilicity. However, it is a challenge to fabricate strain sensors with extreme sensitivity and a wide sensing range. In this work, a multifunctional, cost-effective, and highly sensitive PDMS-encapsulated MXene@polyester fabric strain sensor was fabricated. Firstly, complete adsorption of MXene within the fabric formed conductive networks, and then PDMS was used to endow superhydrophobicity and corrosion resistance. The strain sensor demonstrated multifunctional applications and outstanding performance, such as long-term stability (over 500 cycles) and a wide sensing range (8%). The proposed sensor has promising potential for wearable electronic devices such as health monitoring systems and physiological sensing applications.

Insight into monsoon for shaping the air quality of Islamabad, Pakistan: Comparing the magnitude of health risk associated with PM10 and PM2.5 exposure.

Monsoon plays a determinant role in defining the air quality of many Asian countries. Filter-based 24 h ambient PM10 and PM2.5 sampling was performed by using two paralleled medium volume air samplers during pre-and post-monsoon periods. A negligible change in PM2.5 mass concentration from 45.77 to 44.46 µg/m3 compared to PM10 from 74.34 to 142.49 µg/m3 was observed after the monsoon season. The air quality index (AQI) results showed that the air quality of the city retained from good to slightly polluted in both periods, where PM2.5 remained as the main detrimental to air quality in 95% of the total days. The NOAA HYSPLIT model analysis and wind rose patterns showed air trajectories, especially in post-monsoon originated from relatively polluted areas transported higher PM10. Meteorological attributes indicated a more conducive atmospheric condition for secondary pollution in the pre-monsoon. Evidence showed post-monsoon as a more polluted period, compared to the pre-monsoon and would pose an extra 1.07 × 10-3 lifetime risk to the local population. Similarly, a higher level of PM10 in the post-monsoon caused 43% more premature mortality and 41% more deaths from all-cause mortality compare to the pre-monsoon period, respectively. Implications: Pakistan is an under-developing country where pollution monitoring studies are decidedly limited. Notably, studies, concise PM2.5 and health assessment are deficient. The present study may contribute to evaluating the air quality in special events such as monsoon and can also provide scientific and technical support for subsequent air pollution research. Moreover, the results help to develop adequate prevention and pollution control strategies and offer policy suggestions for monsoon observing countries in general and in particular, in Islamabad, Pakistan. These findings provide essential arguments in favor of educating people and raising awareness about the detrimental health effects of air pollution. Improving the quality of life of people with cardiovascular and respiratory disorders requires an immediate and substantial reduction of air pollution.