Synthesis of new quaternized chitosan Schiff bases and their N-alkyl derivatives as antimicrobial and anti-biofilm retardants in membrane technology.

New quaternized salicylidene chitosan Schiff bases (QSCSBs) and their N-octyl derivatives (OQCs) have been synthesized and characterized, aiming to develop innovative antimicrobial and anti-biofilm agents. This research holds immense potential, as these compounds could be utilized as anti-biofouling additives in membrane technology in the future. The synthesis involved the modification of low molecular-weight-chitosan (LMC) through simultaneous Schiff base formation and quaternization processes to create QSCSBs. Subsequently, QSCSBs were catalytically reduced to form quaternized N-benzyl chitosan (QBCs) intermediates, which then underwent nucleophilic substitution reactions affording N-octyl quaternized chitosans (OQCs). Characterization techniques such as elemental, spectral, and microscopic analyses were used to confirm the successful synthesis of these materials. As membrane technology relies on surface charge, QSCSBs and OQCs with large zeta potentials could be used as positively charged additives. Moreover, SEM image revealed the regular distribution of pores and voids across the additives' surfaces raises intriguing questions about their implications for membrane performance. Meanwhile, the superior antibacterial and antibiofilm potential of these materials, particularly QSCSB2 and OQC2, indicate that the utilization of these compounds as anti-biofouling additives in membrane technology could significantly improve the performance and longevity of membranes used in various applications such as water treatment and desalination.

Cost-effective removal of toxic methylene blue dye from textile effluents by new integrated crosslinked chitosan/aspartic acid hydrogels.

Chitosan/aspartic acid hydrogels were synthesized for MB dye removal from textile aqueous effluents with different ratios by gelation of chitosan with non-toxic gelling agent, crosslinker, glutaraldehyde (Glu). The obtained hydrogels were characterized by spectral and morphological techniques. The characterization techniques confirmed successful preparations and MB dye adsorption. Batch experiments were done to investigate the effects of adsorbent dose, pH, contact time, temperature, and initial MB dye concentration. The optimum conditions were: adsorbent dose 0.1 g, pH 5, contact time 30 min, and temperature 25 °C for Chitosan-Aspartic Acid Hydrogel 1 (CSAA-HG1) and adsorbent dose 0.4 g, pH 2, contact time 60 min, temperature 25 °C for Chitosan-Aspartic Acid Hydrogel 2 (CSAA-HG2). Adsorption capacity of newly hydrogels CSAA-HG1,2 was compared with each other. Adsorption efficiencies reached 99.85 % for CSAA-HG1 and 99.88 % for CSAA-HG2. MB dye adsorption on CSAA-HG1,2 followed Freundlich isotherm model (R2 = 0.94 and 0.92, respectively). Both adsorbents exhibited pseudo-second-order kinetics for MB dye adsorption (R2 = 1). The negative ΔHo indicated that the MB dye adsorption was exothermic, negative ΔGo confirmed that MB dye adsorption process was spontaneous and low values of ∆So indicated low degree of freedom, ordered MB dye molecules on CSAA-HG1,2 surfaces.

Dual ionic liquid-based crosslinked chitosan for fine-tuning of antifouling, water throughput, and denitrification performance of polysulfone membrane.

This study aimed to design a facile and efficient protocol for upgrading the performance indices of polysulfone (PS) membrane (porosity, hydrophilicity, pure water flux (PWF), surface charge, and fouling-resistance) by blending with newly synthesized poly(ionic) crosslinked chitosan Schiff bases (PICCSBs). The PS-PICCSBs mixed-matrix membranes (MMMs) have successfully fabricated and characterized based on spectral and microscopic analyses, porosity, zeta potential, water contact angle, and water uptake (wettability) measurements. The PWF, fouling-resistance against bovine serum albumin (BSA), as well as ion exchange capacity (IEC) against nitrate anion were studied. The wettability, hydrophilicity and overall porosity of new MMMs have greatly increased, in comparison to a pristine PS membrane (M0). In addition, blending of PS with PICCSBs resulted in switching its surface from negatively- to positively-charged. The PWF of MMMs has increased to reach a maximum value of 238.6 L/m2 h for MMM1 (9.3-fold higher than M0). Meanwhile, BSA rejection has declined from 96.62% for M0 to 41.9% for MMM1. The fouling parameters results of MMMs indicated their low fouling propensity. The IEC of nitrate anions revealed that the nitrate uptake by MMM1 is higher than that for M0 and MMM2 by 34% and 14%, respectively.

Mining marine shell wastes for polyelectrolyte chitosan anti-biofoulants: Fabrication of high-performance economic and ecofriendly anti-biofouling coatings.

Banning organotins as antifouling biocides in 2003 was the starting point for many researchers to search for novel economic and environmentally-friendly anti-fouling biocides. In our present contribution, we have successfully functionalized a natural biopolymer, chitosan (CS), isolated from marine wastes with polyelectrolyte brushes akin to ionic liquids. These antifouling biopolymers anchoring polyelectrolyte brushes were in vitro assessed for their ability to eradicate or inhibit the Staphylococcal/Escherichia biofilms. Moreover, these anti-fouling candidates were incorporated into the matrix of commercial paint to formulate antifouling coatings which were subjected to a field static immersion test in the Mediterranean Sea in comparison to a standard antifoulant, Diuron®. The obtained results revealed the prevention of biofilms along with a promising anti-fouling performance. So the new polyelectrolyte chitosan architectures may offer promising anti-foulants additives for biofouling coating applications.