Synthesis of Vinyl-Containing Polydimethylsiloxane in An Active Medium.

This research deals with the synthesis of copoly(methylvinyl)(dimethyl)siloxanes by the copolycondensation of dimethyldiethoxy- and methylvinyldimethoxysilane in an active medium, followed by thermal condensation in a vacuum. We achieved a range of copolymers exhibiting finely tuned molecular weights spanning between 1500 and 20,000 with regulated functional methylvinylsiloxane units. Analysis of the microstructure showed that the copolymerization predominantly formed products demonstrating a random distribution of units (R~1). However, an increase in the content of vinyl-containing monomers increases the R parameter, indicating an enhanced tendency towards alternating linkages within the copolymer matrix.

Thioether-Containing Zirconium(Alkoxy)Siloxanes: Synthesis and Study of Dielectric and Mechanical Properties of Silica-Filled Polydimethylsiloxane Compositions Cured by Them.

A number of thioether-containing zirconium siloxanes, differing in their composition and metal atom shielding degree with a siloxy substituent, were synthesized and characterized. Synthesis of such compounds made it possible to evaluate the effect of sulfur atoms' presence in the cured compositions on their dielectric properties, as well as to evaluate their curing ability and influence on mechanical characteristics compared to the sulfur-free analogs obtained earlier. Studying a wide range of compositions differing in their content and ratio of metallosiloxane and silica components revealed that such systems are still typical dielectrics. At the same time, the introduction of thioether groups can provide increased dielectric constant and conductivity in comparison with previously obtained sulfur-free similar compositions in the <102 Hz frequency range (dielectric constant up to ~10-30 at frequency range 1-10 Hz). As before, the dielectric parameters increase is directly determined by the silica component proportion in the cured material. It is also shown that varying sulfur-containing zirconium siloxanes structure and functionality and its combination with previously obtained sulfur-free analogs, along with varying the functionality and rubber chain length, can be an effective tool for changing the dielectric and mechanical material parameters in a wide range (tensile strength 0.5-7 Mpa, elastic deformation 2-300%), which determine the prospects for the use of such cured systems as dielectric elastomers for various purposes.

Pervaporation and Gas Separation Properties of High-Molecular Ladder-like Polyphenylsilsesquioxanes.

This paper presents the results of studies on the pervaporation properties (for benzene/hexane mixtures) and gas permeability (for He, H2, N2, O2, CO2, CH4, C2H6, and C4H10) of ladder-like polyphenylsesquioxanes (L-PPSQ) with improved physical and chemical properties. These polymers were obtained by condensation of cis-tetraphenylcyclotetrasiloxanetetraol in ammonia medium. The structure of L-PPSQ was fully confirmed by a combination of physicochemical analysis methods: 1H, 29Si NMR, IR spectroscopy, HPLC, powder XRD, and viscometry in solution. For the first time, a high molecular weight of the polymer (Mn = 238 kDa, Mw = 540 kDa) was achieved, which determines its improved mechanical properties and high potential for use in membrane separation. Using TGA and mechanical analysis methods, it was found that this polymer has high thermal (Td5% = 537 °C) and thermal-oxidative stability (Td5% = 587 °C) and good mechanical properties (Young's module (E) = 1700 MPa, ultimate tensile stress (σ) = 44 MPa, elongation at break (ε) = 6%), which is important for making membranes workable under various conditions. The polymer showed a high separation factor for a mixture of 10% wt. benzene in n-hexane (126) at a benzene flow of 33 g/(m2h).

Quantitative Elasticity Mapping of Submicron Silica Hollow Particles by PeakForce QNM AFM Mode.

Silica hollow spheres with a diameter of 100-300 nm and a shell thickness of 8±2 nm were synthesized using a self-templating amphiphilic polymeric precursor, i.e., poly(ethylene glycol)-substituted hyperbranched polyethoxysiloxane. Their elastic properties were addressed with a high-frequency AFM indentation method based on the PeakForce QNM (quantitative nanomechanical mapping) mode enabling simultaneous visualization of the surface morphology and high-resolution mapping of the mechanical properties. The factors affecting the accuracy of the mechanical measurements such as a local slope of the particle surface, deformation of the silica hollow particles by a solid substrate, shell thickness variation, and applied force range were analysed. The Young's modulus of the shell material was evaluated as E=26±7 GPa independent of the applied force in the elastic regime of deformations. Beyond the elastic regime, the buckling instability was observed revealing a non-linear force-deformation response with a hysteresis between the loading and unloading force-distance curves and irreversible deformation of the shell at high applied forces. Thus, it was demonstrated that PeakForce QNM mode can be used for quantitative measurements of the elastic properties of submicon-sized silica hollow particles with nano-size shell thickness, as well as for estimation of the buckling behaviour beyond the elastic regime of shell deformations.

Tetrachromophoric Derivatives of Dibenzoylmethanatoboron Difluoride Based on Stereoregular Cyclotetrasiloxanes: Synthesis and Properties.

A series of new tetrachromophoric systems based on stereoregular tetracyclosiloxanes and dibenzoylmethanatoboron difluoride derivatives have been synthesized and characterized by a complex of physicochemical methods. The photophysical properties of the synthesized compounds are studied by electronic absorption, steady-state, and time-resolved fluorescence spectroscopy. In the synthesized compounds, four dibenzoylmethanatoboron difluoride (DBMBF2)-based fluorophores are in an all-cis arrangement with respect to a cyclotetrasiloxane scaffold. DFT calculations predict that they can form H-type dimers, trimers, or tetramers with an antiparallel orientation of their ground-state dipole moments. Under UV excitation, solutions of these compounds in polar and nonpolar solvents exhibit complex fluorescence consisting of monomer- and excimer-like emissions with different lifetimes. Global fitting analysis reveals the presence of at least four kinetically distinguishable species in the excited state. The studied compounds in solutions have CIE chromaticity coordinates very close to the white color point and are promising objects for the development of next-generation single-emission materials for white illumination.

Synthesis of Siloxane Derivatives of Phenylboronic Acids of Different Structures.

The synthesis of a storage-stable organosilicon modifier with a dioxaborolane-protecting group is described. Its high reactivity and selective anti-Markovnikov addition in hydrosilylation reactions to afford siloxanes of various structures are shown. The possibility of deprotection of both the initial modifier and its siloxane derivatives under mild conditions using water in yields up to 96% is demonstrated. The existence of an equilibrium between the organosilicon derivatives of phenylboronic acids and their cyclic six-membered boroxines was confirmed by 1H NMR spectroscopy and X-ray diffraction analysis data. The use of siloxane derivatives of phenylboronic acids in Suzuki-Miyaura and Chan-Lam cross-coupling reactions was studied. All synthesized compounds were characterized by NMR (1H, 11B, 13C, and 29Si), IR spectroscopy, and high-resolution mass spectrometry.

Synthesis of Multifunctional Oligomethylsilsesquioxanes by Catalyst-Free Hydrolytic Polycondensation of Methyltrimethoxysilane under Microwave Radiation.

The catalyst-free hydrolytic polycondensation of methyltrimethoxysilane under microwave radiation has been studied. The effect of molar ratios of the reagents (MTMS/H2O = 1/0.5-1/9), radiation power (20-300 W), temperature (30-50 °C) and duration of exposure (2.5-90 min) on the course of the process is considered. It has been shown that the use of microwave radiation promotes the activation of the process, and almost complete conversion of the monomer can be achieved in 5 min at 30 °C, 20 W and an MTMS/H2O ratio of 1/3. The optimal radiation power for the maximum conversion of the monomer and MeO-groups is in the range from 20 to 100 W. An increase in the water amount, the duration and temperature of the process contribute to an increase in the monomer conversion, a decrease in the content of residual MeO-groups and the yield of non-volatile oligomethylsilsesquioxanes. The limits of this approach using to the synthesis of multifunctional branched polyorganosilsesquioxanes are determined. Depending on the process conditions, homogeneous water-alcohol solutions of oligomethylsilsesquioxane with a concentration of 20 to 50 wt.% can be obtained. The OH-group content and the molecular weight of the obtained oligomers vary from 10 to 30 wt.% and from 1000 to 600 Da, respectively.

Polydimethylsiloxanes with Grafted Dibenzoylmethanatoboron Difluoride: Synthesis and Properties.

A method for the preparation of polydimethylsiloxanes with grafted methoxy-substituted dibenzoylmethanatoboron difluoride has been described. The structures of prepared polymers were confirmed using NMR, IR spectroscopy and gel permeation chromatography methods. Their thermal properties were investigated using thermal gravimetric analysis, differential scanning calorimetry and thermomechanical analysis. The prepared polymers had good thermal (Td5% up to 393 °C) and thermo-oxidative (Td5% = 413 °C) stability. The polymers started to transit in a viscous flow state at about 40 °C (for 3 a) and at about 20 °C (for 3 b). The viscoelastic characteristics of prepared polymers were determined in the sinusoidal oscillating vibrations mode. It was shown that the studied polymers at low frequencies at room temperature are viscoelastic fluids (G' < G″). Increasing the frequency led to inversion (crossover) of dependences G' and G″, which indicated the transition of polymers from viscous to elastomeric behavior characteristics, and the beginning of the formation of a physical network. Optical properties were studied using electron absorption, steady-state and time-resolved fluorescence spectroscopy. It was shown that intramolecular H-dimers exist in the ground state. The polymers studied had a bright fluorescence in the solution and in the solid state, consisting of bands of monomer and excimer emission. Thermally-activated delayed fluorescence was observed in the solution and the solid state. The prepared polymers possess intriguing properties that make them useful as optical materials, sensors or imaging agents.

Chemical Recycling of High-Molecular-Weight Organosilicon Compounds in Supercritical Fluids.

The main known patterns of thermal and/or catalytic destruction of high-molecular-weight organosilicon compounds are considered from the viewpoint of the prospects for processing their wastes. The advantages of using supercritical fluids in plastic recycling are outlined. They are related to a high diffusion rate, efficient extraction of degradation products, the dependence of solvent properties on pressure and temperature, etc. A promising area for further research is described concerning the application of supercritical fluids for processing the wastes of organosilicon macromolecular compounds.

Ratiometric Singlet Oxygen Sensor Based on BODIPY-DPA Dyad.

Compounds sensitive to reactive oxygen species are widely used in the study of processes in living cells and in the development of therapeutic agents for photodynamic therapy. In the present work, we have synthesized a dyad in which the BODIPY dye is chemically bound to 9,10-diphenylanthracene (DPA). Here, DPA acts as a specific sensor of singlet oxygen and BODIPY as a reference dye. We studied the photophysical properties of the BODIPY-DPA dyad and showed that energy transfer occurs between the chromophores. As a result, the compound has excitation maxima in the absorption region of both DPA and BODIPY, but the fluorescence emission occurs mainly from BODIPY. In the presence of singlet oxygen, the excitation maximum of DPA decreases, while the intensity of the excitation maximum of BODIPY remains almost unchanged. This allows the BODIPY-DPA dyad to be used as a ratiometric sensor of singlet oxygen.

Controllable Synthesis of Hybrid Dendrimers Composed of a Carbosilane Core and an Aromatic Shell: Does Size Matter?

The controllable synthesis of novel hybrid dendrimers composed of flexible and rigid components was accomplished via effective Cu-catalyzed azide-alkyne cycloaddition ("click") reaction between azide-functionalized carbosilane cores of two generations and monoethynyl-substituted hexaphenylbenzene dendron. A comprehensive analysis of the thermal and phase behavior of dendrimers allows us to detect a similar performance of dendrimers of both generations which, in our opinion, can be due to the similar ratio of rigid and flexible blocks in the dendrimers regardless the generation of carbosilane cores. The propensity to crystallization and ordering after the annealing procedure was confirmed by DSC and SWAXS. We found that hybrid dendrimers have a tendency to order depending on their constituents of different structures. This is in contrast to homogeneous dendrimers whose propensity to order is determined by the dendrimer molecule as a whole.

Polyborosiloxanes (PBS): Evolution of Approaches to the Synthesis and the Prospects of Their Application.

The mini-review deals with borosiloxanes as a class of organoelement compounds that comprise Si-O-B bonds, including individual compounds and polymeric structures. The borosiloxanes first synthesized in the 1950s using simple methods demonstrated very unusual properties but were hydrolytically unstable. However, in recent times, synthetic methods have changed significantly, which made it possible to synthesize borosiloxanes that are resistant to external factors, including atmospheric moisture. Borosiloxanes became important due to their unique properties. For example, borosiloxane liquids acquire a thixotropic behavior due to donor-acceptor interchain interactions. In addition, borosiloxanes are used to produce flame-retardant ceramics. An analysis of the literature sources shows that no review has yet been completed on the topic of borosiloxanes. Therefore, we decided that even a brief outlook of this area would be useful for researchers in this and related fields. Thus, the review shows the evolution of the synthesis methods and covers the studies on the properties of these unique molecules, the latest achievements in this field, and the prospects for their application.

Synthesis of Carbosilane and Carbosilane-Siloxane Dendrons Based on Limonene.

In this work, carbosilane dendrons of the first, second, and third generations were obtained on the basis of a natural terpenoid, limonene. Previously, we have shown the possibility of selective hydrosilylation and hydrothiolation of limonene. It is proved that during hydrosilylation, only the isoprenyl double bond reacts, while the cyclohexene double bond does not undergo into the hydrosilylation reaction. However, the cyclohexene double bond reacts by hydrothiolation. This selectivity makes it possible to use limonene as a dendron growth center, while maintaining a useful function-a double bond at the focal point. Thus, the sequence of hydrosilylation and Grignard reactions based on limonene formed carbosilane dendrons. After that, the end groups were blocked by heptamethyltrisiloxane or butyllithium. The obtained substances were characterized using NMR spectroscopy, elemental analysis and GPC. Thus, the proposed methodology for the synthesis of carbosilane dendrons based on the natural terpenoid limonene opens up wide possibilities for obtaining various macromolecules: dendrimers, Janus dendrimers, dendronized polymers, and macroinitiators.

Chemical Structural Coherence Principle on Polymers for Better Adhesion.

Composite materials are the most variative type of materials employed in almost every task imaginable. In the present study, a synthesis of a novel perfluoroalkyltriethoxysilane is reported to be used in creating composites with polyhexafluoropropylene-one of the most indifferent and adhesion-lacking polymers existing. The mechanism of adhesion of hexafluoropropylene is proved to be due to chemical structural coherence of perfluoroalkyltriethoxysilane to a link of polyhexafluoropropylene chain. The ability of perfluoroalkyltriethoxysilane to attach to surfaces was studied by FT-IR spectroscopy of modified glass microspheres. Although the perfluoroalkyltriethoxysilane surface modifier allowed partial adhesion of polyhexafluoropropylene, some detachment took place; therefore, the surface nanostructuring was used to increase its specific area by aluminum foil anodizing. An anodized aluminum surface was studied by scanning electron microscopy. The resulting composite consisting of anodized aluminum, perfluoroalkyl surface modifier, and polyhexafluoropropylene layer was proved to be stable, showed no signs of detachment, and is a promising material for usage in harsh environments.

Cross-Linked Luminescent Polymers Based on ß-Diketone-Modified Polysiloxanes and Organoeuropiumsiloxanes.

Nowadays, luminescent materials attract wide attention due to their valuable characteristics and broad area of potential application. Luminescent silicone-based polymers possess unique properties, such as flexibility, hydrophobicity, thermal and chemical stabilities, etc., which allow them to be utilized in various fields, such as optoelectronics, solid-state lasers, luminescent solar concentrators, sensors, and others. In the present work, a metal-ligand interaction approach was applied to obtain new cross-linked luminescent polymers based on multiligand polysiloxanes with grafted ß-diketone fragments and organoeuropiumsiloxanes containing various organic substituents. Organoeuropiumsiloxanes were utilized as a source of Eu3+ ions due to their compatibility with the silicon matrix. All synthesized polymers were fully characterized and their physicochemical, mechanical, self-healing, optical, and thermal properties were studied.

Organosilicone Compounds in Supercritical Carbon Dioxide.

This review considers the key advantages of using supercritical carbon dioxide as a solvent for systems with organosilicon compounds. Organosilicon polymeric materials synthesis as well as the creation and modification of composites based on them are discussed. Polydimethylsiloxane and analogues used as polymerization stabilizers and nucleation promoters in pore formation processes are analyzed as well.

Ring-Opening Polymerization (ROP) and Catalytic Rearrangement as a Way to Obtain Siloxane Mono- and Telechelics, as Well as Well-Organized Branching Centers: History and Prospects.

PDMS telechelics are important both in industry and in academic research. They are used both in the free state and as part of copolymers and cross-linked materials. At present, the most important, practically used, and well-studied method for the preparation of such PDMS is diorganosiloxane ring-opening polymerization (ROP) in the presence of nucleophilic or electrophilic initiators. In our brief review, we reviewed the current advances in the field of obtaining polydiorganosiloxane telechelics and monofunctional PDMS, as well as well-organized branching centers by the ROP mechanism and catalytic rearrangement, one of the first and most important reactions in the polymer chemistry of silicones, which remains so at the present time.

New types of hyperbranched 1,2,3-triazole-alkoxysiloxane functional polymers for metal embedded nanocomposite surface coatings.

In this study, using the "click-chemistry" azide-alkyne cycloaddition reaction, two new types of polymers, namely, water-soluble amine-functional and water-insoluble pyridine-functional hyperbranched 1,2,3-triazoleorganoethoxysiloxane polymers, capable of stabilizing ultra-small silver nanoparticles and efficient for chemical surface modification were synthesized and characterized by 1H-NMR, 13C-NMR, 29Si-NMR and FT-IR spectroscopy, MALDI and GPC. Coordinatively active hetero-organic polymers with a flexible branched polyethoxysiloxane backbone bearing chelating 1,2,3-triazolyl-dimethylamine and -pyridine conjugated functional groups were exploited towards coordination with Ag+ metal ions, and formation and stabilization of narrowly dispersed silver nanoparticles (Ag-NPs) obtained in the process of radiation induced metal ion reduction. The influence of the chemically assisted radiation process on the Ag-NP size and size distribution was investigated. Hyperbranched polyorganoethoxysiloxanes loaded with Ag-NPs were covalently cross-linked on a Stöber silica surface, demonstrating the efficiency of the developed hetero-organic functional polymers in the preparation of functional nanocomposite coatings for various applications (heterogeneous catalytic systems, antibacterial materials, nanoparticle-based optical sensing devices, etc.). The nanocomposites were investigated and characterized by TEM-EDS, DLS, UV-Vis spectroscopy and 29Si MAS NMR spectroscopy.

Star-Shaped Polydimethylsiloxanes with Organocyclotetrasilsesquioxane Branching-Out Centers: Synthesis and Properties.

New non-crystallizable low-dispersity star-shaped polydimethylsiloxanes (PDMS) containing stereoregular cis-tetra(organo)(dimethylsiloxy)cyclotetrasiloxanes containing methyl-, tolyl- and phenyl-substituents at silicon atoms and the mixture of four stereoisomers of tetra[phenyl(dimethylsiloxy)]cyclotetrasiloxane as the cores were synthesized. Their thermal and viscous properties were studied. All synthesized compounds were characterized by a complex of physicochemical analysis methods: nuclear magnetic resonance (NMR), FT-IR spectroscopy, gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), viscometry in solution, rheometry, and Langmuir trough study.

True Molecular Composites: Unusual Structure and Properties of PDMS-MQ Resin Blends.

Poly(dimethyl siloxane)-MQ rubber molecular composites are easy to prepare, as it does not require a heterophase mixing of ingredients. They are characterized by perfect homogeneity, so they are very promising as rubber materials with controllable functional characteristics. The manuscript reveals that MQ resin particles can significantly, more than by two orders of magnitude, enhance the mechanical properties of poly(dimethyl siloxane), and, as fillers, they are not inferior to aerosils. In the produced materials, MQ particles play a role of the molecular entanglements, so rubber molecular weight and MQ filler concentration are the parameters determining the structure and properties of such composites. Moreover, a need for a saturation of the reactive groups and minimization of the surface energy of MQ particles also determine the size and distribution of the filler at different filler rates. An unusual correlation of the concentration of MQ component and the interparticle spacing was revealed. Based on the extraordinary mechanical properties and structure features, a model of the structure poly(dimethyl siloxane)-rubber molecular composites and of its evolution in the process of stretching, was proposed.