Evaluation of Transmission Near the Christiansen Wavelength for Dynamic Sand Samples.

Many optical applications, including free-space optical communications, lidar, and astronomical measurements, are impacted by the presence of light-scattering particles also known as obscurants. Scattering from particles consisting of sand, dust, dirt, and other substances can significantly degrade optical signals. For many obscurants, the index of refraction is dependent on the wavelength of light, and there exists a Christiansen wavelength (λc) at which scattering is at a minimum. At λc the index of refraction of the scattering particles (ns) matches that of the surrounding medium, in this case air (with refractive index na). This condition makes the scattering particulates almost invisible to the propagating light, minimizing scattering and increasing transmission at λc. Previously, the authors showed a technique for measuring the index of refraction n(λ) and the extinction coefficient k(λ) using spectroscopic ellipsometry for various sand samples. Spectroscopic measurements on static sand samples demonstrated good agreement with the predicted spectral properties and highlighted the presence of a Christiansen feature near 8 µm. However, in outdoor environments, the scattering particles are never stationary but in a constant state of motion. In this work, spectroscopic measurements on dynamic sand samples (sand that is falling through the optical beam path) show two Christiansen features seen previously in predicted and observed static sand measurements. Additionally, we characterize, for the first time, transmission around a Christiansen feature using a tunable laser and show results consistent with other spectroscopic measurements.

Measurement of the Optical Constants of Sand Samples Using Ellipsometry on Sand-Adhesive Composites.

In order to model the propagation of light through a sand cloud, it is critical to have accurate data for the optical constants of the sand particles that comprise it. The same holds true for modeling propagation through particles of any type suspended in a medium. Few methods exist, however, to measure these quantities with high accuracy. In this paper, a characterization method based on spectroscopic ellipsometry (SE) that can be applied to a particulate material is presented. In this method, a polished disc of an adhesive compound is prepared, and its optical constants are measured. Next, a mixture of the adhesive and a sand sample is prepared and processed into a polished disc, and SE is performed. By treating the mixture as a Bruggeman effective medium, the optical constants of the particulate material are extracted. For verification of the proposed method, it is first applied to pure silica powder, demonstrating good agreement between measured optical constants and literature values. It is then applied to Arizona road dust, a standard reference material, as well as real desert sand samples. The resulting optical constant data is input into a rigorous scattering model to predict extinction coefficients for various types of sand. Modeling results are compared to spectroscopic measurements on static sand samples, demonstrating good agreement between predicted and measured spectral properties including the presence of a Christiansen feature near a wavelength of 8 µm.

Thermal tuning of arsenic selenide glass thin films and devices.

We present a method of post-deposition tuning of the optical properties of thin film dielectric filters and mirrors containing chalcogenide glass (ChG) layers by thermally adjusting their refractive index. A common challenge associated with the use of ChG films in practical applications is that they suffer from slight run-to-run variations in optical properties resulting from hard-to-control changes in source material and deposition conditions. These variations lead to inconsistencies in optical constants, making the fabrication of devices with prescribed optical properties challenging. In this paper, we present new work that takes advantage of the large variation of a ChG films' refractive index as a function of annealing. We have carried out extensive characterization of the thermal index tuning and thickness change of arsenic selenide (As2Se3) ChG thin films and observed refractive index changes larger than 0.1 in some cases. We show results for refractive index as a function of annealing time and temperature and propose a model to describe this behavior based on bond rearrangement. We apply thermal refractive index tuning to permanently shift the resonance of a Fabry-Perot filter and the cutoff wavelength of a Bragg reflector. The Bragg reflector, consisting of alternating As2Se3 and CaF2 layers, exhibits high reflectance across a ∼550 nm band with only five layers. Modeling results are compared with spectroscopic measurements, demonstrating good agreement.

Optical Properties of a Sulfur-Rich Organically Modified Chalcogenide Polymer Synthesized via Inverse Vulcanization and Containing an Organometallic Comonomer.

Inverse vulcanization is the method by which molten sulfur can be combined with comonomers to form stable polymers termed "organically modified chalcogenide" or "ORMOCHALC" polymers. One advantage to ORMOCHALC polymers is that they can possess important optical properties, such as high refractive index and strong infrared (IR) transmission, while being easier to fabricate than glass materials with similar optical properties. In the present work, a new ORMOCHALC is fabricated by using tetravinyltin as a comomoner with sulfur. This is the first example of an organometallic molecule being used as a comonomer to develop ORMOCHALCs. The result is an ORMOCHALC polymer that has the highest refractive index reported for a "sulfur and comonomer" polymer and that demonstrates unprecedented transmission in the IR region.

Reconfiguring structured light beams using nonlinear metasurfaces.

Ultra-compact, low-loss, fast, and reconfigurable optical components, enabling manipulation of light by light, could open numerous opportunities for controlling light on the nanoscale. Nanostructured all-dielectric metasurfaces have been shown to enable extensive control of amplitude and phase of light in the linear optical regime. Among other functionalities, they offer unique opportunities for shaping the wave front of light to introduce the orbital angular momentum (OAM) to a beam. Such structured light beams bring a new degree of freedom for applications ranging from spectroscopy and micromanipulation to classical and quantum optical communications. To date, reconfigurability or tuning of the optical properties of all-dielectric metasurfaces have been achieved mechanically, thermally, electrically or optically, using phase-change or nonlinear optical materials. However, a majority of demonstrated tuning approaches are either slow or require high optical powers. Arsenic trisulfide (As2S3) chalcogenide glass offering ultra-fast and large χ(3)nonlinearity as well as a low two-photon absorption coefficient in the near and mid-wave infrared spectral range, could provide a new platform for the realization of fast and relatively low intensity reconfigurable metasurfaces. Here, we design and experimentally demonstrate an As2S3 chalcogenide glass based metasurface that enables reshaping of a conventional Hermite-Gaussian beam with no OAM into an OAM beam at low intensity levels, while preserves the original beam's amplitude and phase characteristics at high intensity levels. The proposed metasurface could find applications for a new generation of optical communication systems and optical signal processing.

Coordinated induction of cell survival signaling in the inflamed microenvironment of the prostate.

PURPOSE: Both prostate cancer and benign prostatic hyperplasia are associated with inflammatory microenvironments. Inflammation is damaging to tissues, but it is unclear how the inflammatory microenvironment protects specialized epithelial cells that function to proliferate and repair the tissue. The objective of this study is to characterize the cell death and cell survival response of the prostatic epithelium in response to inflammation. METHODS: We assessed induction of cell death (TNF, TRAIL, TWEAK, FasL) and cell survival factors (IGFs, hedgehogs, IL-6, FGFs, and TGFs) in inflamed and control mouse prostates by ELISA. Cell death mechanisms were determined by immunoblotting and immunofluorescence for cleavage of caspases and TUNEL. Survival pathway activation was assessed by immunoblotting and immunofluorescence for Mcl-1, Bcl-2, Bcl-XL, and survivin. Autophagy was determined by immunoblotting and immunofluorescence for free and membrane associated light chain 3 (LC-3). RESULTS: Cleavage of all four caspases was significantly increased during the first 2 days of inflammation, and survival protein expression was substantially increased subsequently, maximizing at 3 days. By 5 days of inflammation, 50% of prostatic epithelial cells expressed survivin. Autophagy was also evident during the recovery phase (3 days). Finally, immunofluorescent staining of human specimens indicates strong activation of survival proteins juxtaposed to inflammation in inflamed prostate specimens. CONCLUSIONS: The prostate responds to deleterious inflammation with induction of cell survival mechanisms, most notably survivin and autophagy, demonstrating a coordinated induction of survival factors that protects and expands a specialized set of prostatic epithelial cells as part of the repair and recovery process during inflammation.

Expansion of prostate epithelial progenitor cells after inflammation of the mouse prostate.

Prostatic inflammation is a nearly ubiquitous pathological feature observed in specimens from benign prostate hyperplasia and prostate cancer patients. The microenvironment of the inflamed prostate is highly reactive, and epithelial hyperplasia is a hallmark feature of inflamed prostates. How inflammation orchestrates epithelial proliferation as part of its repair and recovery action is not well understood. Here, we report that a novel epithelial progenitor cell population is induced to expand during inflammation. We used sphere culture assays, immunofluorescence, and flow cytometry to show that this population is increased in bacterially induced inflamed mouse prostates relative to naïve control prostates. We confirmed from previous reports that this population exclusively possesses the ability to regrow entire prostatic structures from single cell culture using renal grafts. In addition, putative progenitor cells harvested from inflamed animals have greater aggregation capacity than those isolated from naïve control prostates. Expansion of this critical cell population requires IL-1 signaling, as IL-1 receptor 1-null mice exhibit inflammation similar to wild-type inflamed animals but exhibit significantly reduced progenitor cell proliferation and hyperplasia. These data demonstrate that inflammation promotes hyperplasia in the mouse prostatic epithelium by inducing the expansion of a selected epithelial progenitor cell population in an IL-1 receptor-dependent manner. These findings may have significant impact on our understanding of how inflammation promotes proliferative diseases such as benign prostatic hyperplasia and prostate cancer, both of which depend on expansion of cells that exhibit a progenitor-like nature.

Interleukin-driven insulin-like growth factor promotes prostatic inflammatory hyperplasia.

Prostatic inflammation is of considerable importance to urologic research because of its association with benign prostatic hyperplasia and prostate cancer. However, the mechanisms by which inflammation leads to proliferation and growth remain obscure. Here, we show that insulin-like growth factors (IGFs), previously known as critical developmental growth factors during prostate organogenesis, are induced by inflammation as part of the proliferative recovery to inflammation. Using genetic models and in vivo IGF receptor blockade, we demonstrate that the hyperplastic response to inflammation depends on interleukin-1-driven IGF signaling. We show that human prostatic hyperplasia is associated with IGF pathway activation specifically localized to foci of inflammation. This demonstrates that mechanisms of inflammation-induced epithelial proliferation and hyperplasia involve the induction of developmental growth factors, further establishing a link between inflammatory and developmental signals and providing a mechanistic basis for the management of proliferative diseases by IGF pathway modulation.

Preparation and layer-by-layer solution deposition of Cu(In,Ga)O2 nanoparticles with conversion to Cu(In,Ga)S2 films.

We present a method of Cu(In,Ga)S2 (CIGS) thin film formation via conversion of layer-by-layer (LbL) assembled Cu-In-Ga oxide (CIGO) nanoparticles and polyelectrolytes. CIGO nanoparticles were created via a novel flame-spray pyrolysis method using metal nitrate precursors, subsequently coated with polyallylamine (PAH), and dispersed in aqueous solution. Multilayer films were assembled by alternately dipping quartz, Si, and/or Mo substrates into a solution of either polydopamine (PDA) or polystyrenesulfonate (PSS) and then in the CIGO-PAH dispersion to fabricate films as thick as 1-2 microns. PSS/CIGO-PAH films were found to be inadequate due to weak adhesion to the Si and Mo substrates, excessive particle diffusion during sulfurization, and mechanical softness ill-suited to further processing. PDA/CIGO-PAH films, in contrast, were more mechanically robust and more tolerant of high temperature processing. After LbL deposition, films were oxidized to remove polymer and sulfurized at high temperature under flowing hydrogen sulfide to convert CIGO to CIGS. Complete film conversion from the oxide to the sulfide is confirmed by X-ray diffraction characterization.