Occurrence of methicillin-resistant Staphylococcus aureus in surface waters near industrial hog operation spray fields.

Industrial hog operations (IHOs) have been identified as a source of antibiotic-resistant Staphylococcus aureus, including methicillin-resistant S. aureus (MRSA). However, few studies have investigated the presence of antibiotic-resistant S. aureus in the environment near IHOs, specifically surface waters proximal to spray fields where IHO liquid lagoon waste is sprayed. Surface water samples (n=179) were collected over the course of approximately one year from nine locations in southeastern North Carolina and analyzed for the presence of presumptive MRSA using CHROMagar MRSA media. Culture-based, biochemical, and molecular tests, as well as matrix-assisted laser desorption/ionization-time of flight mass spectrometry were used to confirm that isolates that grew on CHROMagar MRSA media were S. aureus. Confirmed S. aureus isolates were then tested for susceptibility to 16 antibiotics and screened for molecular markers of MRSA (mecA, mecC) and livestock adaptation (absence of scn). A total of 12 confirmed MRSA were detected in 9 distinct water samples. Nine of 12 MRSA isolates were also multidrug-resistant (MDRSA [i.e., resistant to ≥3 antibiotic classes]). All MRSA were scn-positive and most (11/12) belonged to a staphylococcal protein A (spa) type t008, which is commonly associated with humans. Additionally, 12 confirmed S. aureus that were methicillin-susceptible (MSSA) were recovered, 7 of which belonged to spa type t021 and were scn-negative (a marker of livestock-adaptation). This study demonstrated the presence of MSSA, MRSA, and MDRSA in surface waters adjacent to IHO lagoon waste spray fields in southeastern North Carolina. To our knowledge, this is the first report of waterborne S. aureus from surface waters proximal to IHOs.

Probenecid hypersensitivity in AIDS: a case report.

BACKGROUND: Cidofovir plus probenecid is a new therapeutic alternative for refractory cytomegalovirus and acyclovir-resistant herpes infections in AIDS patients. Probenecid is used in conjunction with the antiherpetic medication (cidofovir) in order to reduce the incidence of nephrotoxicity by cidofovir. OBJECTIVE: To present therapeutic alternatives for successful administration of probenecid to AIDS patients who develop a hypersensitivity reaction to the medication. METHODS AND RESULTS: We describe a patient with AIDS who was being treated with the cidofovir/probenecid combination for a peri-anal acyclovir-resistant herpetic infection. The patient subsequently developed a cutaneous hypersensitivity reaction to probenecid alone. A pretreatment regimen consisting of prednisone, H1 and H2 blockers was administered before the dosing of probenecid in order for the patient to continue with the antiviral therapy. CONCLUSION: Cutaneous hypersensitivity reactions to probenecid may be seen more frequently with the increasing use of cidofovir in AIDS patients. Our pre-treatment protocol is one therapeutic alternative to be considered in order to continue with probenecid.

An inverse approach to determining myocardial material properties.

Passive myocardial material properties have been measured previously by subjecting test samples of myocardium to in vitro load-deformation analysis or, in the intact heart, by pressure-volume relationships. A new method for determining passive material properties, described in this paper, couples a p-version finite element model of the heart, a nonlinear optimization algorithm and a dense set of transmural measured strains that could be obtained in the intact heart by magnetic resonance imaging (MRI) radiofrequency tissue tagging. Unknown material parameters for a nonlinear, nonhomogeneous material law are determined by solving an inverse boundary value problem. An objective function relating the least-squares difference of model-predicted and measured strains is minimized with respect to the unknown material parameters using a novel optimization algorithm that utilizes forward finite element solutions to calculate derivatives of model-predicted strains with respect to the material parameters. Test cases incorporating several salient features of the inverse material identification problem for the heart are formulated to test the performance of the inverse algorithm in typical experimental conditions. Known true material parameters can be determined to within a small tolerance and random noise is shown not to affect the stability of the inverse solution appreciably. On the basis of these validation experiments, we conclude that the inverse material identification problem for the heart can be extended to solve for unknown material parameters that describe in vivo myocardial material behavior.

An experimental method for evaluating constitutive models of myocardium in in vivo hearts.

A new experimental method for the evaluation of myocardial constitutive models combines magnetic resonance (MR) radiofrequency (RF) tissue-tagging techniques with iterative two-dimensional (2-D) nonlinear finite element (FE) analysis. For demonstration, a nonlinear isotropic constitutive model for passive diastolic expansion in the in vivo canine heart is evaluated. A 2-D early diastolic FE mesh was constructed with loading parameters for the ventricular chambers taken from mean early diastolic-to-late diastolic pressure changes measured during MR imaging. FE solution was performed for regional, intramyocardial ventricular wall strains using small-strain, small-displacement theory. Corresponding regional ventricular wall strains were computed independently using MR images that incorporated RF tissue tagging. Two unknown parameters were determined for an exponential strain energy function that maximized agreement between observed (from MR) and predicted (from FE analysis) regional wall strains. Extension of this methodology will provide a framework in which to evaluate the quality of myocardial constitutive models of arbitrary complexity on a regional basis.

Ventricular interaction in the pathologic heart. A model based study.

The effects of direct ventricular interaction and interaction mediated by the pericardium on the diastolic left ventricle (LV) were quantified using idealized models of five pathologic conditions. Two-dimensional (2D) mathematical models were constructed in long and short axis views of four pathologic LV conditions and the normal heart (NL): dilated cardiomyopathy (DCM), concentric LV hypertrophy (HYP), chronic anterior-apical infarction in a normal shaped LV (CAINL), and CAI in a dilated LV (CAID). To assess the effects of RV pressure increase on the LV mechanical state, RV pressure was systematically increased for several LV pressures and changes in the LV diastolic pressure-area relationships, and LV free wall and septal principal stresses and strains were quantified. At higher RV pressures, with pericardial effects included in the models, the pressure-area relationship was similar for all models, indicating that, at these higher pressures, the effects of RV and pericardial pressures are more important than global LV shape, wall thickness, or material properties in determining the pressure-area relationship. There were significant differences among models in the changes in LV free wall and septal stress and strain after an increase in RV pressure. These models may be of use in predicting interaction in the corresponding clinical state.

Mathematical three-dimensional solid modeling of biventricular geometry.

The characterization of regional myocardial stress distribution has been limited by the use of idealized mathematical representations of biventricular geometry. State-of-the-art computer-aided design and engineering (CAD/CAE) techniques can be used to create complete, unambiguous mathematical representations (solid models) of complex object geometry that are suitable for a variety of applications, including stress-strain analyses. We have used advanced CAD/CAE software to create a 3-D solid model of the biventricular unit using planar geometric data extracted from an ex vivo canine heart. Volumetric analysis revealed global volume errors of 4.7%, -1.3%, -1.6%, and -1.1% for the left ventricular cavity, right ventricular cavity, myocardial wall, and total enclosed volumes, respectively. Model errors for 34 in-plane area and circumference determinations (mean +/- SD) were 5.3 +/- 6.7% and 3.8 +/- 2.7%. Error analysis suggested that model volume errors may be due to operator variability. These results demonstrate that solid modeling of the ex vivo biventricular unit yields an accurate mathematical representation of myocardial geometry which is suitable for meshing and subsequent finite element analysis. The use of CAD/CAE solid modeling in the representation of biventricular geometry may thereby facilitate the characterization of regional myocardial stress distribution.

Regional myocardial stress distribution from magnetic resonance image-based mathematical models.

The instantaneous regional stress distribution within the myocardium, which cannot be directly measured, has been estimated using improved numerical methods and nonaxisymmetric biventricular geometry. To do this, we have employed computer-aided solid mathematical modeling to generate a three-dimensional representation for an ex vivo canine biventricular unit using magnetic resonance imaging. A two-dimensional transverse section was isolated from the solid mathematical model for regional stress analysis using p-version finite element analysis. Loading conditions and material property descriptions were taken from published reports. Analyses showed the maximum principal stresses to range from -1.76 X 10(5) to 8.52 X 10(5) dynes/cm2 during systolic loading, and from -3.85 X 10(4) to 1.13 X 10(5) dynes/cm2 during diastolic loading. This study demonstrates that magnetic resonance image-based solid mathematical biventricular models are suitable for regional stress analysis using p-version finite element analysis. p-Version finite element analysis using magnetic resonance image-based cardiac representations facilitates in vivo stress-strain analyses and may allow the clinical estimation of regional myocardial stress.