Brosimum alicastrum Sw. (Ramón): An Alternative to Improve the Nutritional Properties and Functional Potential of the Wheat Flour Tortilla.

The wheat flour tortilla (WFT) is a Mexican food product widely consumed in the world, despite lacking fiber and micronutrients. Ramón seed flour (RSF) is an underutilized natural resource rich in fiber, minerals and bioactive compounds that can be used to improve properties of starchy foods, such as WFT. The study evaluated the impact of partial replacement of wheat flour with RSF on the physicochemical, sensory, rheological and nutritional properties and antioxidant capacity (AC) of RSF-containing flour tortilla (RFT). Results indicated that RFT (25% RSF) had higher dietary fiber (4.5 times) and mineral (8.8%; potassium 42.8%, copper 33%) content than WFT. Two sensory attributes were significantly different between RTF and WFT, color intensity and rollability. RFT was soft and it was accepted by the consumer. Phenolic compounds (PC) and AC were higher in RFT (11.7 times, 33%-50%, respectively) than WFT. PC identification by ultra-performance liquid chromatography quadrupole time of flight mass spectrometry (UPLC-QTOF-MS) showed that phenolic acids esterified with quinic acid, such as chlorogenic and other caffeoyl and coumaroyl derivatives were the major PC identified in RSF, resveratrol was also detected. These results show that RSF can be used as an ingredient to improve nutritional and antioxidant properties of traditional foods, such as the WFT.

Study of organochlorine pesticides and heavy metals in soils of the Juarez valley: an important agricultural region between Mexico and the USA.

The Juarez Valley is an important agricultural region in northern Mexico, conveniently organized into three modules (I to III). For decades, their soils have been exposed to organochlorine pesticides (OCPs) and also have been irrigated with wastewaters, which may contain heavy metals. Nowadays, there is very limited information regarding the presence of OCPs and heavy metals in these soils. Thus, the aim of this study was to diagnose these soils for OCPs and heavy metal content by using gas chromatography coupled with electron micro-capture detector and atomic absorption spectrometry, respectively. The results indicated that 4,4'-dichlorodiphenyldichloroethylene and 4,4'-dichlorodiphenyltrichloroethane were primarily disseminated across the three modules since they were found in 100% and 97% of the analyzed soils, respectively. According to international regulations, none of the determined OCP concentrations are out of the limits. Additionally, the Cu, Zn, Fe, Pb, and Mn were found in all sampled soils from the three modules. The highest concentration of Fe was found in module II (1902.7 ± 332.2 mg kg-1), followed by Mn in module III (392.43 ± 74.43 mg kg-1), Zn in module I (38.36 ± 26.57 mg kg-1), Pb in module II (23.48 ± 6.48 mg kg-1), and Cu in module I (11.04 ± 3.83 mg kg-1) (p ≤ 0.05). These values did not exceed the limits proposed by international standards. The Cd was detected in most of the analyzed soils and all their values, with an average of 2 mg kg-1, surpassed the Mexican standards (0.35 mg kg-1). This study has mapped the main OCPs and heavy metals in the Juarez Valley and can serve as a starting point to further monitor the behave of xenobiotics. Since these recalcitrant compounds might be bio-accumulated in biological systems, further analytical methods, as well as remediation techniques, should be developed.

Toxicity of copper hydroxide nanoparticles, bulk copper hydroxide, and ionic copper to alfalfa plants: A spectroscopic and gene expression study.

Bulk Cu compounds such as Cu(OH)2 are extensively used as pesticides in agriculture. Recent investigations suggest that Cu-based nanomaterials can replace bulk materials reducing the environmental impacts of Cu. In this study, stress responses of alfalfa (Medicago sativa L.) seedlings to Cu(OH)2 nanoparticle or compounds were evaluated. Seeds were immersed in suspension/solutions of a Cu(OH)2 nanoform, bulk Cu(OH)2, CuSO4, and Cu(NO3)2 at 25 and 75 mg/L. Six days later, the germination, seedling growth, and the physiological and biochemical responses of sprouts were evaluated. All Cu treatments significantly reduced root elongation (average = 63%). The ionic compounds at 25 and 75 mg/L caused a reduction in all elements analyzed (Ca, K, Mg, P, Zn, and Mn), excepting for S, Fe and Mo. The bulk-Cu(OH)2 treatment reduced K (48%) and P (52%) at 75 mg/L, but increased Zn at 25 (18%) and 75 (21%) mg/L. The nano-Cu(OH)2 reduced K (46%) and P (48%) at 75 mg/L, and also P (37%) at 25 mg/L, compared with control. Confocal microscopy images showed that all Cu compounds, at 75 mg/L, significantly reduced nitric oxide, concurring with the reduction in root growth. Nano Cu(OH)2 at 25 mg/L upregulated the expression of the Cu/Zn superoxide dismutase gene (1.92-fold), while ionic treatments at 75 mg/L upregulated (∼10-fold) metallothionein (MT) transcripts. Results demonstrated that nano and bulk Cu(OH)2 compounds caused less physiological impairments in comparison to the ionic ones in alfalfa seedlings.

In vitro Inhibition of Pancreatic Lipase by Polyphenols:A Kinetic, Fluorescence Spectroscopy and Molecular Docking Study.

The inhibitory activity and binding characteristics of caffeic acid, p-coumaric acid, quercetin and capsaicin, four phenolic compounds found in hot pepper, against porcine pancreatic lipase activity were studied and compared to hot pepper extract. Quercetin was the strongest inhibitor (IC50=(6.1±2.4) µM), followed by p-coumaric acid ((170.2±20.6) µM) and caffeic acid ((401.5±32.1) µM), while capsaicin and a hot pepper extract had very low inhibitory activity. All polyphenolic compounds showed a mixed-type inhibition. Fluorescence spectroscopy studies showed that polyphenolic compounds had the ability to quench the intrinsic fluorescence of pancreatic lipase by a static mechanism. The sequence of Stern-Volmer constant was quercetin, followed by caffeic and p-coumaric acids. Molecular docking studies showed that caffeic acid, quercetin and p-coumaric acid bound near the active site, while capsaicin bound far away from the active site. Hydrogen bonds and π-stacking hydrophobic interactions are the main pancreatic lipase-polyphenolic compound interactions observed.

Effect of the refining process on Moringa oleifera seed oil quality.

We evaluated the physicochemical properties and oxidative stability of the oil extracted from the seeds of Moringa oleifera during its refining process. Refining is accomplished in three stages: neutralization, degumming, and bleaching. Four samples were analyzed, corresponding to each step of the processed and crude oil. Increases in the density, viscosity, saponification value and oxidation of the oil were detected during the refining, while the peroxide value and carotenoid content diminished. Moreover, the refractive index and iodine content were stable throughout the refining. Nine fatty acids were detected in all four samples, and there were no significant differences in their composition. Oleic acid was found in the largest amount, followed by palmitic acid and behenic acid. The crude, neutralized, and degummed oils showed high primary oxidation stability, while the bleached oil had a low incidence of secondary oxidation.

Effect of solvents and methods of stirring in extraction of lycopene, oleoresin and fatty acids from over-ripe tomato.

Lycopene and oleoresin extraction from powder of tomato over-ripe by three agitation methods and four solvents have been evaluated. Also, tomato powder and the oleoresins were characterized biochemically. On average, the moisture content of powder was found to be 4.30, ash 8.90, proteins 11.23 and lipids 4.35 g 100 g(-1). The best oleoresin extraction yield was achieved by combining sonication and acetone at 1.43 g 100 g(-1). The greatest amount of lycopene (65.57 ± 0.33 mg 100 g(-1)) was also obtained using the same treatment. The presence of trans-lycopene was positively confirmed by HPLC and FTIR. In oleoresins, linoleic acid (C18:2n6) was the predominant with 50% of total fatty acids, whereas stearic acid (C18:0) is presented in a smaller proportion (5%). A simple and suitable method for extraction of lycopene from over-ripe tomato was optimized. In industrial applications, tomato by-products are a viable source of analytes, such as lycopene and unsaturated fatty acids.

Biochemical composition and physicochemical properties of broccoli flours.

The objective of this research was to study the biochemical composition and physicochemical properties of three different flours prepared from broccoli crop remains. Florets, leaves and stalks of broccoli were dried at 60 degrees C, and the flours obtained were analysed for proximate composition, amino acid profile, fatty acid composition, and physicochemical properties. The florets flour showed the highest protein content (22.41 g/100 g dry weight); ash was higher in leaves flour (14.67 g/100 g dry weight), and the lipid content was similar in the flours of leaves and stalks. The stalks flour had high crude fibre content and low protein content. All flours presented a high water absorption index. Tyrosine, aspartic acid, glutamic acid, proline and valine were found in larger concentration. The most abundant fatty acids in the lipids were linolenic acid (C18:3n3), palmitic acid (C16:0) and linoleic acid (C18:2n6). Broccoli flours prepared in this study are good source of nutrients and could be utilized as dietary supplements.