Microscopic Techniques for the Analysis of Micro and Nanostructures of Biopolymers and Their Derivatives.

Natural biopolymers, a class of materials extracted from renewable sources, is garnering interest due to growing concerns over environmental safety; biopolymers have the advantage of biocompatibility and biodegradability, an imperative requirement. The synthesis of nanoparticles and nanofibers from biopolymers provides a green platform relative to the conventional methods that use hazardous chemicals. However, it is challenging to characterize these nanoparticles and fibers due to the variation in size, shape, and morphology. In order to evaluate these properties, microscopic techniques such as optical microscopy, atomic force microscopy (AFM), and transmission electron microscopy (TEM) are essential. With the advent of new biopolymer systems, it is necessary to obtain insights into the fundamental structures of these systems to determine their structural, physical, and morphological properties, which play a vital role in defining their performance and applications. Microscopic techniques perform a decisive role in revealing intricate details, which assists in the appraisal of microstructure, surface morphology, chemical composition, and interfacial properties. This review highlights the significance of various microscopic techniques incorporating the literature details that help characterize biopolymers and their derivatives.

Isolation of cellulose-II nanospheres from flax stems and their physical and morphological properties.

In this study, cellulose-II nanospheres (CNS) were extracted from flax fibers and analyzed to understand the crystalline, functional and morphological properties by means of X-ray Diffraction (X-RD), Fourier Transform Infrared (FT-IR) and Scanning Electron Microscopy (SEM). FT-IR and SEM results indicate the effective removal of extractives, lignin and hemicellulose. X-RD results clearly show the transformation from cellulose-I to cellulose-II during the mercerization process. Further, the resulting cellulose fibers were treated with sulfuric acid in order to obtain cellulose nanospheres (CNS). The morphology was measured by SEM, Transmission Electron Microscopy (TEM) and Atomic Force Microscopy (AFM). The size distribution and the surface charge of CNS were investigated by Small-Angle X-ray Scattering (SAXS) and Nanosizer. The results indicate a size distribution of CNS between 20 and 90nm moderately dispersed. Finally, the transversal elastic modulus of CNS-II was determined by using AFM, and results reveal the range varying from 6 to 25GPa.

Ionic Compatibilization of Cellulose Nanocrystals with Quaternary Ammonium Salt and Their Melt Extrusion with Polypropylene.

On account to their high mechanical properties along with high reinforcing capacity, cellulose nanocrystals (CNCs) could be the ultimate choice for polymer nanocomposites as filler. Recently, different strategies have been investigated for the melt extrusion of CNC-based polymer nanocomposites because it is a solvent-free process and because this technique is more viable for commercial industrialization. However, most thermoplastic polymers are processed at high temperatures, and sulfuric acid preparation of CNC limits the processing because of surface sulfate groups degradation. In this study we profitably used these negatively charged groups, and quaternary ammonium salt was ionically adsorbed on CNC by a simple aqueous method. Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray diffraction were used to characterize adsorbed CNC, and changes in polarity were investigated by contact angle measurements. Modified CNC was extruded with polypropylene at 190 °C, and the ensuing composites were characterized in terms of mechanical (by dynamic mechanical analysis and tensile tests), thermal (by differential scanning calorimetry), and morphological (scanning electron microscopy) properties. The melt rheology of PP-based nanocomposites was also reported.

Structural investigation of cellulose nanocrystals extracted from chili leftover and their reinforcement in cariflex-IR rubber latex.

The morphology and chemical composition of chili fibres were investigated. Unusual low lignin content was found when compared to other annual plants. High aspect ratio cellulose nanocrystals (CNCs) were prepared from these fibres by an acid hydrolysis treatment. CNCs extracted from chili leftover were characterized using FT-IR, AFM, TGA and XRD to access their functional, structural, thermal and crystallinity properties, respectively. The length and diameter of the chili leftover CNC were 90-180 nm and 4-6 nm, respectively, resulting in an average aspect ratio of 26. This high aspect ratio ensures percolation at low filler content which in turn results in high thermal and mechanical properties of the nanocomposites. These CNCs were used to prepare nanocomposite films using the highly marketing commercial latex called Cariflex-Isoprene (IR) by casting/evaporation in order to investigate their reinforcing effect. The mechanical properties of nanocomposite films were investigated in both the linear and nonlinear range by DMA and tensile test, respectively, and their morphology was studied using scanning electron microscopy.