Self-Organization via Dewetting in Polymeric Assemblies.

Dewetting is a spontaneous process involving a thin liquid film that minimizes interfacial energy by reducing the surface area via the generation of defects on the film. In industry, dewetting is regarded as a problem that results in defects or a heterogeneous surface; however, in this study, dewetting is intentionally induced to create various patterns at intended positions spontaneously with polymeric materials and nanoparticles. The dewetting-induced patterning process is conducted by controlling the capillary force and evaporation ratio through an evaporative self-assembly system. The linear-polymeric arrays on the substrate played an important role in modifying the surface geometry and treatment for a heterogeneous surface, and an additional patterning process is performed on patterned arrays to create dewetting-induced self-organizing patterns. Here, this method is used to introduce material arrays with specific shapes such as dots, dumbbells, potbellies, Vs, and trapezoids.

Enhanced Mechanical Properties of Polylactic Acid/Poly(Butylene Adipate-co-Terephthalate) Modified with Maleic Anhydride.

An increase in plastic waste pollution and the strengthening of global environmental policies have heightened the need for research on biodegradable plastics. In this regard, polylactic acid (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) are notable examples, serving as alternatives to traditional plastics. In this study, the compatibility and mechanical properties of PLA/PBAT blends were improved by the chemical grafting of maleic anhydride (MAH). In addition, qualitative analyses were conducted, dynamic mechanical properties were investigated, and the structure and mechanical characteristics of the blends were analyzed. With an increase in the MAH concentration, the grafting yield of the blends increased, and significantly improved the compatibility of the PLA/PBAT blend, with an ~2 and 2.9 times increase in the tensile strength and elongation at break, respectively. These findings indicate that the modified PLA/PBAT blend demonstrates potential for applications that require sustainable plastic materials, thereby contributing to the development of environmentally friendly alternatives in the plastics industry.

Fabrication of Robust Superhydrophobic Surfaces with Dual-Curing Siloxane Resin and Controlled Dispersion of Nanoparticles.

We developed a simple method for the fabrication of superhydrophobic surfaces on various substrates using spray coating. The fabrication method started with the blending of a modified hydrophobic siloxane binder, silica nanoparticles, and a volatile solvent by sonication. The mixture was spray-coated on various surfaces such as slide glass, paper, metal and fabric, forming a rough surface comprising silica particles dispersed in a hydrophobic binder. Surface hydrophobicity was affected by the surface energy of the binder and the degree of roughness. Therefore, we realized a superhydrophobic surface by controlling these two factors. The hydrophobicity of the siloxane binder was determined by the treatment of fluorine silane; the roughness was controlled by the amount of coated materials and sonication time. Thus, using the spray coating method, we obtained a superhydrophobic surface that was mechanically durable, thermally stable, and chemically resistant.

Programmed Design of Highly Crystalline Organic Semiconductor Patterns with Uniaxial Alignment via Blade Coating for High-Performance Organic Field-Effect Transistors.

A solution-printing technique that enables the patterning and aligning of organic semiconducting crystals is necessary for their practical application. Here, we report the facile growth of 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS-PEN) semiconducting crystal patterns via a novel blade-coating technique. Defining low/high shearing-speed regions alternatively in a programmed manner enables the growth of TIPS-PEN crystals in low-speed regions and their patterning in high-speed regions. Various crystal-analysis tools, including polarized UV-vis absorption spectroscopy, grazing-incidence wide-angle X-ray scattering, and near-edge X-ray absorption fine structure, reveal that a crystal grown at an optimum shearing speed is highly oriented along the shearing direction with high crystallinity, and its molecules have a more edge-on orientation for efficient lateral-charge transport. As a result, organic field-effect transistors comprised of these crystals show a high field-effect mobility of up to 1.74 cm2/(V s). In addition, various crystal patterns can be created by simply changing the programming parameters, suggesting the broad utility of the crystal patterns and printing technique.

Hepatic Cellular Distribution of Silica Nanoparticles by Surface Energy Modification.

The cellular distribution of silica nanoparticles (NPs) in the liver is not well understood. Targeting specific cells is one of the most important issues in NP-based drug delivery to improve delivery efficacy. In this context, the present study analyzed the relative cellular distribution pattern of silica NPs in the liver, and the effect of surface energy modification on NPs. Hydrophobic NP surface modification enhanced NP delivery to the liver and liver sinusoid fFendothelial cells (LSECs). Conversely, hydrophilic NP surface modification was commensurate with targeting hepatic stellate cells (HSCs) rather than other cell types. There was no notable difference in NP delivery to Kupffer cells or hepatocytes, regardless of hydrophilic or hydrophobic NP surface modification, suggesting that both the targeting of hepatocytes and evasion of phagocytosis by Kupffer cells are not associated with surface energy modification of silica NPs. This study provides useful information to target specific cell types using silica NPs, as well as to understand the relationship between NP surface energy and the NP distribution pattern in the liver, thereby helping to establish strategies for cell targeting using various NPs.