Organophosphate Detoxification and Acetylcholinesterase Reactivation Triggered by Zeolitic Imidazolate Framework Structural Degradation.

Organophosphate (OP) toxicity is related to inhibition of acetylcholinesterase (AChE) activity, which plays a key role in the neurotransmission process. In this work, we report the ability of different zinc zeolitic imidazolate frameworks (ZIFs) to behave as potential antidotes against OP poisoning. The Zn-L coordination bond (L = purine, benzimidazole, imidazole, or 2-methylimidazole) is sensitive to the G-type nerve agent model compounds diisopropylfluorophosphate (DIFP) and diisopropylchlorophosphate, leading to P-X (X = F or Cl) bond breakdown into nontoxic diisopropylphosphate. P-X hydrolysis is accompanied by ZIF structural degradation (Zn-imidazolate bond hydrolysis), with the concomitant release of the imidazolate linkers and zinc ions representing up to 95% of ZIF particle dissolution. The delivered imidazolate nucleophilic attack on the OP@AChE adduct gives rise to the recovery of AChE enzymatic function. P-X bond breakdown, ZIF structural degradation, and AChE reactivation are dependent on imidazolate linker nucleophilicity, framework topology, and particle size. The best performance is obtained for 20 nm nanoparticles (NPs) of Zn(2-methylimidazolate)2 (sod ZIF-8) exhibiting a DIFP degradation half-life of 2.6 min and full recovery of AChE activity within 1 h. 20 nm sod ZIF-8 NPs are not neurotoxic, as proven by in vitro neuroblastoma cell culture viability tests.

Water-Enhanced Direct Air Capture of Carbon Dioxide in Metal-Organic Frameworks.

We have developed two series of amine-functionalized zirconium (Zr) metal-organic framework-808 (MOF-808), which were produced by postsynthetic modifications to have either amino acids coordinated to Zr ions (MOF-808-AAs) or polyamines covalently bound to the chloro-functionalized structure (MOF-808-PAs). These MOF variants were comprehensively characterized by liquid-state 1H nuclear magnetic resonance (NMR) measurements and potentiometric acid-base titration to determine the amounts of amines, energy-dispersive X-ray spectroscopy to assess the extent of covalent substitution by polyamines, powder X-ray diffraction analysis to verify the maintenance of the MOF crystallinity and structure after postsynthetic modifications, nitrogen sorption isotherm measurements to confirm retention of the porosity, and water sorption isotherm measurements to find the water uptake in the pores of each member of the series. Evaluation and testing of these compounds in direct air capture (DAC) of CO2 showed improved CO2 capture performance for the functionalized forms, especially under humid conditions: In dry conditions, the l-lysine- and tris(3-aminopropyl)amine-functionalized variants, termed as MOF-808-Lys and MOF-808-TAPA, exhibited the highest CO2 uptakes at 400 ppm, measuring 0.612 and 0.498 mmol g-1, and further capacity enhancement was achieved by introducing 50% relative humidity, resulting in remarkable uptakes of 1.205 and 0.872 mmol g-1 corresponding to 97 and 75% increase compared to the dry uptakes, respectively. The mechanism underlying the enhanced uptake efficiency was revealed by 13C solid-state NMR and temperature-programmed desorption measurements, indicating the formation of bicarbonate species, and therefore a stoichiometry of 1:1 CO2 to each amine site.

CO2 Adsorption in a Robust Iron(III) Pyrazolate-Based MOF: Molecular-Level Details and Frameworks Dynamics From Powder X-ray Diffraction Adsorption Isotherms.

Understanding adsorption processes at the molecular level, with multi-technique approaches, is nowadays at the frontier of porous materials research. In this work it is shown that with a proper data treatment, in situ high-resolution powder X-ray diffraction (HR-PXRD) at variable temperature and gas pressure can reveal atomic details of the accommodation sites, the framework dynamics as well as thermodynamic information (isosteric heat of adsorption) of the CO2 adsorption process in the robust iron(III) pyrazolate-based MOF Fe2(BDP)3 [H2BDP = 1,4-bis(1H-pyrazol-4-yl)benzene]. Highly reliable "HR-PXRD adsorption isotherms" can be constructed from occupancy values of CO2 molecules. The "HR-PXRD adsorption isotherms" accurately match the results of conventional static and dynamic gas sorption experiments and Monte Carlo simulations. These results are indicative of the impact of the molecular-level behavior on the bulk properties of the system under study and of the potential of the presented multi-technique approach to understand adsorption processes in metal-organic frameworks.

Scalable Synthesis and Electrocatalytic Performance of Highly Fluorinated Covalent Organic Frameworks for Oxygen Reduction.

In this study, we present a novel approach for the synthesis of covalent organic frameworks (COFs) that overcomes the common limitations of non-scalable solvothermal procedures. Our method allows for the room-temperature and scalable synthesis of a highly fluorinated DFTAPB-TFTA-COF, which exhibits intrinsic hydrophobicity. We used DFT-based calculations to elucidate the role of the fluorine atoms in enhancing the crystallinity of the material through corrugation effects, resulting in maximized interlayer interactions, as disclosed both from PXRD structural resolution and theoretical simulations. We further investigated the electrocatalytic properties of this material towards the oxygen reduction reaction (ORR). Our results show that the fluorinated COF produces hydrogen peroxide selectively with low overpotential (0.062 V) and high turnover frequency (0.0757 s-1 ) without the addition of any conductive additives. These values are among the best reported for non-pyrolyzed and metal-free electrocatalysts. Finally, we employed DFT-based calculations to analyse the reaction mechanism, highlighting the crucial role of the fluorine atom in the active site assembly. Our findings shed light on the potential of fluorinated COFs as promising electrocatalysts for the ORR, as well as their potential applications in other fields.

Effect of Missing-Linker Defects and Ion Exchange on Stability and Proton Conduction of a Sulfonated Layered Zr-MOF.

Intentionally introduced defects into solid materials create opportunities to control and tune their diverse physicochemical properties. Despite the growing interest in defect-engineered metal-organic frameworks (MOFs), there are still only a handful of studies on defective proton-conducting MOFs, including no reports on two-dimensional ones. Ion-conducting materials are fundamentally of great importance to the development of energy storage and conversion devices, including fuel cells and batteries. In this work, we demonstrate the introduction of missing-linker defects into a sulfonated proton conductive 2D zirconium-based MOF (JUK-14), using a facile post-synthetic approach and compare the stability and performance of the resulting materials, including proton conductivity, as well as adsorption of N2, CO2, and H2O molecules. We also discuss the associated presence of interlayer counterions and their effect on the properties and stability. Our approach to defect engineering can be extended to other layered MOFs and used for tuning their activity.

A mesoporous Zr-based metal-organic framework driven by the assembly of an octatopic linker.

Metal-organic frameworks (MOFs) based on high-connected nets are generally very attractive due to their combined robustness and porosity. Here, we describe the synthesis of BCN-348, a new high-connected Zr-MOF built from an 8-connected (8-c) cubic Zr-oxocluster and an 8-c organic linker. BCN-348 contains a minimal edge-transitive 3,4,8-c eps net, and combines mesoporosity with thermal and hydrolytic stability. Encouraging results from preliminary studies on its use as a catalyst for hydrolysis of a nerve-agent simulant suggest its potential as an agent for detoxification of chemical weapons and other pernicious compounds.

Mercury Clathration-Driven Phase Transition in a Luminescent Bipyrazolate Metal-Organic Framework: A Multitechnique Investigation.

Mercury is one of the most toxic heavy metals. By virtue of its triple bond, the novel ligand 1,2-bis(1H-pyrazol-4-yl)ethyne (H2BPE) was expressly designed and synthesized to devise metal-organic frameworks (MOFs) exhibiting high chemical affinity for mercury. Two MOFs, Zn(BPE) and Zn(BPE)·nDMF [interpenetrated i-Zn and noninterpenetrated ni-Zn·S, respectively; DMF = dimethylformamide], were isolated as microcrystalline powders. While i-Zn is stable in water for at least 15 days, its suspension in HgCl2 aqueous solutions prompts its conversion into HgCl2@ni-Zn. A multitechnique approach allowed us to shed light onto the observed HgCl2-triggered i-Zn-to-HgCl2@ni-Zn transformation at the molecular level. Density functional theory calculations on model systems suggested that HgCl2 interacts via the mercury atom with the carbon-carbon triple bond exclusively in ni-Zn. Powder X-ray diffraction enabled us to quantify the extent of the i-Zn-to-HgCl2@ni-Zn transition in 100-5000 ppm HgCl2 (aq) solutions, while X-ray fluorescence and inductively coupled plasma-mass spectrometry allowed us to demonstrate that HgCl2 is quantitatively sequestered from the aqueous phase. Irradiating at 365 nm, an intense fluorescence is observed at 470 nm for ni-Zn·S, which is partially quenched for i-Zn. This spectral benchmark was exploited to monitor in real time the i-Zn-to-HgCl2@ni-Zn conversion kinetics at different HgCl2 (aq) concentrations. A sizeable fluorescence increase was observed, within a 1 h time lapse, even at a concentration of 5 ppb. Overall, this comprehensive investigation unraveled an intriguing molecular mechanism, featuring the disaggregation of a water-stable MOF in the presence of HgCl2 and the self-assembly of a different crystalline phase around the pollutant, which is sequestered and simultaneously quantified by means of a luminescence change. Such a case study might open the way to new-conception strategies to achieve real-time sensing of mercury-containing pollutants in wastewaters and, eventually, pursue their straightforward and cost-effective purification.

Oxime@Zirconium-Metal-Organic Framework Hybrid Material as a Potential Antidote for Organophosphate Poisoning.

A novel material with dual activity toward organophosphate (OP) poisoning, based on Zr-MOF-808 and neutral oxime RS69N, has been prepared. The hybrid material has a significant drug payload (5.2 ± 0.9 oxime to MOF-808 molar ratio) and shows a sustained oxime release in simulated physiological media, leading to the successful reactivation of OP-inhibited acetylcholinesterase. At the same time, the hybrid system presents an efficient and moderately fast removal rate of a toxic organophosphorus model compound (diisopropylfluorophosphate) from simulated physiological media (t1/2 = 183 min; 95% removal rate after 24 h).

MOF/polymer hybrids through in situ free radical polymerization in metal-organic frameworks.

We use the free radical polymerization initiator 4,4'-azobis(cyanovaleric acid) coordinated to the open metal sites of metal-organic frameworks (MOFs) to give rise to highly uniform MOF/polymer hybrids. We demonstrate this strategy on two robust zirconium MOFs (NU-1000 and MOF-808), which are the most effective catalysts for degradation of chemical warfare nerve agents. The resulting hybrid materials maintain their hydrolytic catalytic activity and have substantially improved adhesion to polypropylene and activated carbon textile fibers, yielding highly robust MOF/polymer/textile hybrid systems. These composites are suitable for the green production of active protective clothing and filters capable of detoxifying organophosphorus warfare agents.

Tetrazine Linkers as Plug-and-Play Tags for General Metal-Organic Framework Functionalization and C60 Conjugation.

The value of covalent post-synthetic modification in expanding the chemistry and pore versatility of reticular solids is well documented. Here we use mesoporous crystals of the metal-organic framework (MOF) UiO-68-TZDC to demonstrate the value of tetrazine connectors for all-purpose inverse electron-demand Diels-Alder ligation chemistry. Our results suggest a positive effect of tetrazine reticulation over its reactivity for quantitative one-step functionalization with a broad scope of alkene or alkyne dienophiles into pyridazine and dihydropyridazine frameworks. This permits generating multiple pore environments with diverse chemical functionalities and the expected accessible porosities, that is also extended to the synthesis of crystalline fulleretic materials by covalent conjugation of fullerene molecules.

Impact of Pore Flexibility in Imine-Linked Covalent Organic Frameworks on Benzene and Cyclohexane Adsorption.

This work focuses on the impact of covalent organic frameworks' (COFs) pore flexibility in the adsorption and separation of benzene and cyclohexane. With this aim, we have selected the imine-linked 3D COFs COF-300 and LZU-111 as examples of flexible and rigid frameworks, respectively. Optimized syntheses at room temperature or in solvothermal conditions enabled us to selectively isolate the narrow-pore form of COF-300 (COF-300-rt) or a mixture of the narrow-pore and a larger-pore form (COF-300-st), respectively, with different textural properties (BET specific surface area = 39 or 1270 m2/g, respectively, from N2 adsorption at 77 K). In the case of LZU-111, only the room temperature route was successful, leading to the known microporous framework. COF-300-rt, COF-300-st, and LZU-111 were studied for benzene and cyclohexane adsorption and separation in static and dynamic conditions. At 298 K and 1 bar, these COFs adsorb more benzene (251, 221, and 214 cm3/g STP, respectively) than cyclohexane (175, 133, and 164 cm3/g STP, respectively). Moreover, the benzene and cyclohexane isotherms of COF-300-rt and COF-300-st are characterized by steps, as expected with a flexible material. Indeed, in situ powder X-ray diffraction experiments on benzene- and cyclohexane-impregnated batches enabled us to trap, for the first time, a sequence of forms of COF-300 with different pore aperture, rationalizing the stepped hysteretic isotherms. Finally, benzene/cyclohexane separation was evaluated using a benzene/cyclohexane 50:50 v/v flow at different temperatures (T = 298, 323, and 348 K): LZU-111 does not selectively retain any of the two components, while COF-300 exhibits stronger benzene-COF interactions also in dynamic conditions.

Zirconium Metal-Organic Polyhedra with Dual Behavior for Organophosphate Poisoning Treatment.

Organophosphate nerve agents and pesticides are extremely toxic compounds because they result in acetylcholinesterase (AChE) inhibition and concomitant nerve system damage. Herein, we report the synthesis, structural characterization, and proof-of-concept utility of zirconium metal-organic polyhedra (Zr-MOPs) for organophosphate poisoning treatment. The results show the formation of robust tetrahedral cages [((n-butylCpZr)3(OH)3O)4L6]Cl6 (Zr-MOP-1; L = benzene-1,4-dicarboxylate, n-butylCp = n-butylcyclopentadienyl, Zr-MOP-10, and L = 4,4'-biphenyldicarboxylate) decorated with lipophilic alkyl residues and possessing accessible cavities of ∼9.8 and ∼10.7 Šinner diameters, respectively. These systems are able to both capture the organophosphate model compound diisopropylfluorophosphate (DIFP) and host and release the AChE reactivator drug pralidoxime (2-PAM). The resulting 2-PAM@Zr-MOP-1(0) host-guest assemblies feature a sustained delivery of 2-PAM under simulated biological conditions, with a concomitant reactivation of DIFP-inhibited AChE. Finally, 2-PAM@Zr-MOP systems have been incorporated into biocompatible phosphatidylcholine liposomes with the resulting assemblies being non-neurotoxic, as proven using neuroblastoma cell viability assays.

Layer-by-Layer Integration of Zirconium Metal-Organic Frameworks onto Activated Carbon Spheres and Fabrics with Model Nerve Agent Detoxification Properties.

We report the controlled synthesis of thin films of prototypical zirconium metal-organic frameworks [Zr6O4(OH)4(benzene-1,4-dicarboxylate-2-X)6] (X = H, UiO-66 and X = NH2, UiO-66-NH2) over the external surface of shaped carbonized substrates (spheres and textile fabrics) using a layer-by-layer method. The resulting composite materials contain metal-organic framework (MOF) crystals homogeneously distributed over the external surface of the porous shaped bodies, which are able to capture an organophosphate nerve agent simulant (diisopropylfluorophosphate, DIFP) in competition with moisture (very fast) and hydrolyze the P-F bond (slow). This behavior confers the composite material self-cleaning properties, which are useful for blocking secondary emission problems of classical protective equipment based on activated carbon.

Impact of Pore Size and Defects on the Selective Adsorption of Acetylene in Alkyne-Functionalized Nickel(II)-Pyrazolate-Based MOFs.

C2 H2 /CO2 separation is a highly challenging process as a consequence of their similar physicochemical properties. In this work we have explored, by static and dynamic gas sorption techniques and computational modelling, the suitability of a series of two isoreticular robust Ni(II)pyrazolate-based MOFs, bearing alkyne moieties on the ligand backbones, for C2 H2 /CO2 separation. The results are consistent with high adsorption capacity and selectivity of the essayed systems towards C2 H2 molecules. Furthermore, a post-synthetic treatment with KOH ethanolic solution gives rise to linker vacancy defects and incorporation of extraframework potassium ions. Creation of defects is responsible for increased adsorption capacity for both gases, however, strong interactions of the cluster basic sites and extraframework potassium cations with CO2 molecules are responsible for a lowering of C2 H2 over CO2 selectivity.

Chlorination of a Zeolitic-Imidazolate Framework Tunes Packing and van der Waals Interaction of Carbon Dioxide for Optimized Adsorptive Separation.

Molecular separation of carbon dioxide (CO2) and methane (CH4) is of growing interest for biogas upgrading, carbon capture and utilization, methane synthesis and for purification of natural gas. Here, we report a new zeolitic-imidazolate framework (ZIF), coined COK-17, with exceptionally high affinity for the adsorption of CO2 by London dispersion forces, mediated by chlorine substituents of the imidazolate linkers. COK-17 is a new type of flexible zeolitic-imidazolate framework Zn(4,5-dichloroimidazolate)2 with the SOD framework topology. Below 200 K it displays a metastable closed-pore phase next to its stable open-pore phase. At temperatures above 200 K, COK-17 always adopts its open-pore structure, providing unique adsorption sites for selective CO2 adsorption and packing through van der Waals interactions with the chlorine groups, lining the walls of the micropores. Localization of the adsorbed CO2 molecules by Rietveld refinement of X-ray diffraction data and periodic density functional theory calculations revealed the presence and nature of different adsorption sites. In agreement with experimental data, grand canonical Monte Carlo simulations of adsorption isotherms of CO2 and CH4 in COK-17 confirmed the role of the chlorine functions of the linkers and demonstrated the superiority of COK-17 compared to other adsorbents such as ZIF-8 and ZIF-71.

Multifunctionality in an Ion-Exchanged Porous Metal-Organic Framework.

Porous robust materials are typically the primary selection of several industrial processes. Many of these compounds are, however, not robust enough to be used as multifunctional materials. This is typically the case of Metal-Organic Frameworks (MOFs) which rarely combine several different excellent functionalities into the same material. In this report we describe the simple acid-base postsynthetic modification of isotypical porous rare-earth-phosphonate MOFs into a truly multifunctional system, maintaining the original porosity features: [Ln(H3pptd)]·xSolvent [where Ln3+ = Y3+ (1) and (Y0.95Eu0.05)3+ (1_Eu)] are converted into [K3Ln(pptd)]·zSolvent [where Ln3+ = Y3+ (1K) and (Y0.95Eu0.05)3+ (1K_Eu)] by immersing the powder of 1 and 1_Eu into an ethanolic solution of KOH for 48 h. The K+-exchanged Eu3+-based material exhibits a considerable boost in CO2 adsorption, capable of being reused for several consecutive cycles. It can further separate C2H2 from CO2 from a complex ternary gas mixture composed of CH4, CO2, and C2H2. This high adsorption selectivity is, additionally, observed for other gaseous mixtures, such as C3H6 and C3H8, with all these results being supported by detailed theoretical calculations. The incorporation of K+ ions notably increases the electrical conductivity by 4 orders of magnitude in high relative humidity conditions. The conductivity is assumed to be predominantly protonic in nature, rendering this material as one of the best conducting MOFs reported to date.

Metal-organic frameworks for the removal of the emerging contaminant atenolol under real conditions.

Pharmaceutical and personal care products (PPCPs) are regarded as an emerging class of contaminants, which are often released directly into the environment, causing severe deleterious effects. In particular, the widely prescribed ß-blocker atenolol (At) is alarmingly present in water. Despite the toxicity caused by At, no specific methods are currently available for its efficient removal. Here, 8 highly porous metal-organic frameworks (MOFs) with a priori remarkable aqueous stability and exceptional porosity were proposed for the removal of At. A robust nickel bispyrazolate MOF (Ni8BDP6) was selected as the most promising adsorbent, further improving its At decontamination efficiency (92-100%) and stability (<1% degradation) by using its defective version, KOH@Ni8BDP6. Finally, the At removal was studied for the first time using a MOF-continuous flow column-device under realistic conditions (tap drinking water and river water, and considering the MOF integrity), achieving a very high contaminant removal efficiency for consecutive 12 days (ca. 90%) and envisioning the future real application of MOFs in water remediation.

Diffusion Control in Single-Site Zinc Reticular Amination Catalysts.

Zn-containing metal-organic frameworks have been used for the first time as heterogeneous catalysts in the amination of C-Cl bonds. The use of extended bis(pyrazolate) linkers can generate highly porous architectures, which favor the diffusion of amines to the confined spaces with respect to other imidazolate frameworks with narrower pore windows. The N4Zn nodes of the Zn-reticular framework show comparable activity to state-of-the-art homogeneous Zn amination catalysts, avoiding the use of basic conditions, precious metals, or other additives. This is combined with long-term activity and stability upon several reaction cycles, without contamination of the reaction product.

Mixed-Metal Cerium/Zirconium MOFs with Improved Nerve Agent Detoxification Properties.

A series of Ce/Zr mixed-metal-organic frameworks with different topology/connectivity, namely, Ce/Zr-UiO-66 (U01, U02, and U03) (fcu (12-c)), Ce/Zr-DUT-67-PZDC (D01 and D02) (reo (8-c)), and Ce/Zr-MOF-808 (M01, M02, and M03) (spn (6-c)) were evaluated toward the detoxification of toxic nerve agent model diisopropylfluorophosphate (DIFP) at room temperature in unbuffered aqueous solution. Noteworthily, the catalytic rate for P-F bond cleavage increased with increasing Ce/Zr molar ratio. A further increase in catalytic activity can be achieved by Mg(OMe)2 doping of the mixed-metal MOFs as exemplified with M01@Mg(OMe)2 and M02@Mg(OMe)2 systems. The results show that Mg(OMe)2 incorporation into the mesoporous cavities of M01 and M02 give rise to P-F hydrolytic degradation half-lives of nearly 5 and 2 min with 100% degradation of DIFP after 55 and 65 min for M01@Mg(OMe)2 1:2 and M02@Mg(OMe)2 1:4, respectively.

A Highly Water-Stable meta-Carborane-Based Copper Metal-Organic Framework for Efficient High-Temperature Butanol Separation.

Biofuels are considered sustainable and renewable alternatives to conventional fossil fuels. Biobutanol has recently emerged as an attractive option compared to bioethanol and biodiesel, but a significant challenge in its production lies in the separation stage. The current industrial process for the production of biobutanol includes the ABE (acetone-butanol-ethanol) fermentation process from biomass; the resulting fermentation broth has a butanol concentration of no more than 2 wt% (the rest is essentially water). Therefore, the development of a cost-effective process for separation of butanol from dilute aqueous solutions is highly desirable. The use of porous materials for the adsorptive separation of ABE mixtures is considered a highly promising route, as these materials can potentially have high affinities for alcohols and low affinities for water. To date, zeolites have been tested toward this separation, but their hydrophilic nature makes them highly incompetent for this application. The use of metal-organic frameworks (MOFs) is an apparent solution; however, their low hydrolytic stabilities hinder their implementation in this application. So far, a few nanoporous zeolitic imidazolate frameworks (ZIFs) have shown excellent potential for butanol separation due to their good hydrolytic and thermal stabilities. Herein, we present a novel, porous, and hydrophobic MOF based on copper ions and carborane-carboxylate ligands, mCB-MOF-1, for butanol recovery. mCB-MOF-1 exhibits excellent stability when immersed in organic solvents, water at 90 °C for at least two months, and acidic and basic aqueous solutions. We found that, like ZIF-8, mCB-MOF-1 is non-porous to water (type II isotherm), but it has higher affinity for ethanol, butanol, and acetone compared to ZIF-8, as suggested by the shape of the vapor isotherms at the crucial low-pressure region. This is reflected in the separation of a realistic ABE mixture in which mCB-MOF-1 recovers butanol more efficiently compared to ZIF-8 at 333 K.