Measuring volume fractions of a three-phase flow without separation utilizing an approach based on artificial intelligence and capacitive sensors.

Many different kind of fluids in a wide variety of industries exist, such as two-phase and three-phase. Various combinations of them can be expected and gas-oil-water is one of the most common flows. Measuring the volume fraction of phases without separation is vital in many aspects, one of which is financial issues. Many methods are utilized to ascertain the volumetric proportion of each phase. Sensors based on measuring capacity are so popular because this kind of sensor operates seamlessly and autonomously without necessitating any form of segregation or disruption for measuring in the process. Besides, at the present moment, Artificial intelligence (AI) can be nominated as the most useful tool in several fields, and metering is no exception. Also, three main type of regimes can be found which are annular, stratified, and homogeneous. In this paper, volume fractions in a gas-oil-water three-phase homogeneous regime are measured. To accomplish this objective, an Artificial Neural Network (ANN) and a capacitance-based sensor are utilized. To train the presented network, an optimized sensor was implemented in the COMSOL Multiphysics software and after doing a lot of simulations, 231 different data are produced. Among all obtained results, 70 percent of them (161 data) are awarded to the train data, and the rest of them (70 data) are considered for the test data. This investigation proposes a new intelligent metering system based on the Multilayer Perceptron network (MLP) that can estimate a three-phase water-oil-gas fluid's water volume fraction precisely with a very low error. The obtained Mean Absolute Error (MAE) is equal to 1.66. This dedicates the presented predicting method's considerable accuracy. Moreover, this study was confined to homogeneous regime and cannot measure void fractions of other fluid types and this can be considered for future works. Besides, temperature and pressure changes which highly temper relative permittivity and density of the liquid inside the pipe can be considered for another future idea.

Introducing effective parameters for predicting job burnout using a self-organizing method based on group method of data handling neural network.

In addition to affecting people's bodily and mental health, the Covid-19 epidemic has also altered the emotional and mental well-being of many workers. Especially in the realm of institutions and privately held enterprises, which encountered a plethora of constraints due to the peculiar circumstances of the epidemic. It was thus anticipated that the present study would use a group method of data handling (GMDH) neural network for analyzing the relationship of demographic factors, Coronavirus, resilience, and the burnout in startups. The test methodology was quantitative. The research examined 384 startup directors and representatives, which is a sizable proportion of the limitless community. The BRCS, the MBI-GS, and custom-made assessments of stress due to the Coronavirus were all used to collect data. Cronbach's alpha confirmed the polls' dependability, and an expert panel confirmed the surveys' authenticity. The GMDH neural network's inherent potential for self-organization was used to choose the most useful properties automatically. The trained network has a three-layered topology with 4, 3, and 2 neurons in each of the hidden layers. The GMDH network has significantly reduced the computational load by using just 7 parameters of marital status, stress of covid-19, job experience, professional efficiency, gender, age, and resilience for burnout categorization. After comparing the neural network's output with the acquired data, it was determined that the constructed network accurately classified all of the information. Among the achievements of this research, high accuracy in predicting job burnout, checking the performance of neural network in determining job burnout and introducing effective characteristics in determination of this parameter can be mentioned.

Air Kerma Calculation in Diagnostic Medical Imaging Devices Using Group Method of Data Handling Network.

The air kerma, which is the amount of energy given off by a radioactive substance, is essential for medical specialists who use radiation to diagnose cancer problems. The amount of energy that a photon has when it hits something can be described as the air kerma (the amount of energy that was deposited in the air when the photon passed through it). Radiation beam intensity is represented by this value. Hospital X-ray equipment has to account for the heel effect, which means that the borders of the picture obtain a lesser radiation dosage than the center, and that air kerma is not symmetrical. The voltage of the X-ray machine can also affect the uniformity of the radiation. This work presents a model-based approach to predict air kerma at various locations inside the radiation field of medical imaging instruments, making use of just a small number of measurements. Group Method of Data Handling (GMDH) neural networks are suggested for this purpose. Firstly, a medical X-ray tube was modeled using Monte Carlo N Particle (MCNP) code simulation algorithm. X-ray tubes and detectors make up medical X-ray CT imaging systems. An X-ray tube's electron filament, thin wire, and metal target produce a picture of the electrons' target. A small rectangular electron source modeled electron filaments. An electron source target was a thin, 19,290 kg/m3 tungsten cube in a tubular hoover chamber. The electron source-object axis of the simulation object is 20° from the vertical. For most medical X-ray imaging applications, the kerma of the air was calculated at a variety of discrete locations within the conical X-ray beam, providing an accurate data set for network training. Various locations were taken into account in the aforementioned voltages inside the radiation field as the input of the GMDH network. For diagnostic radiology applications, the trained GMDH model could determine the air kerma at any location in the X-ray field of view and for a wide range of X-ray tube voltages with a Mean Relative Error (MRE) of less than 0.25%. This study yielded the following results: (1) The heel effect is included when calculating air kerma. (2) Computing the air kerma using an artificial neural network trained with minimal data. (3) An artificial neural network quickly and reliably calculated air kerma. (4) Figuring out the air kerma for the operating voltage of medical tubes. The high accuracy of the trained neural network in determining air kerma guarantees the usability of the presented method in operational conditions.

Proposing Intelligent Approach to Predicting Air Kerma within Radiation Beams of Medical X-ray Imaging Systems.

The air kerma is a key parameter in medical diagnostic radiology. Radiologists use the air kerma parameter to evaluate organ doses and any associated patient hazards. The air kerma can be simply described as the deposited kinetic energy once a photon passes through the air, and it represents the intensity of the radiation beam. Due to the heel effect in the X-ray sources of medical imaging systems, the air kerma is not uniform within the X-ray beam's field of view. Additionally, the X-ray tube voltage can also affect this nonuniformity. In this investigation, an intelligent technique based on the radial basis function neural network (RBFNN) is presented to predict the air kerma at every point within the fields of view of the X-ray beams of medical diagnostic imaging systems based on discrete and limited measured data. First, a diagnostic imaging system was modeled with the help of the Monte Carlo N Particle X version (MCNPX) code. It should be noted that a tungsten target and beryllium window with a thickness of 1 mm (no extra filter was applied) were used for modeling the X-ray tube. Second, the air kerma was calculated at various discrete positions within the conical X-ray beam for tube voltages of 40 kV, 60 kV, 80 kV, 100 kV, 120 kV, and 140 kV (this range covers most medical X-ray imaging applications) to provide the adequate dataset for training the network. The X-ray tube voltage and location of each point at which the air kerma was calculated were used as the RBFNN inputs. The calculated air kerma was also assigned as the output. The trained RBFNN model was capable of estimating the air kerma at any random position within the X-ray beam's field of view for X-ray tube voltages within the range of medical diagnostic radiology (20-140 kV).

Investigation on the Wilson Neuronal Model: Optimized Approximation and Digital Multiplierless Implementation.

Neuromorphic engineering is an essential science field which incorporates the basic aspects of issues together such as: physics, mathematics, electronics, etc. The primary block in the Central Nervous System (CNS) is neurons that have functional roles such as: receiving, processing, and transmitting data in the brain. This paper presents Wilson Multiplierless Neuron (WMN) model which is a modified version of the original model. This model uses power-2 based functions, Look-Up Table (LUT) approach and shifters to apply a multiplierless digital realization leads to overhead costs reduction and increases in the final system frequency. The proposed model specifically follows the original neuron model in case of spiking patterns and also dynamical pathways. To validate the proposed model in digital hardware implementation, the FPGA board (Xilinx Virtex II XC2VP30) can be used. Hardware results show the increasing in the system frequency compared with the original model and other similar papers. Numerical results demonstrate that the proposed system speed-up is 210 MHz that is higher than the original one, 85 MHz. Additionally, the overall saving in FPGA resources for the proposed model is 96.86 % that is more than the original model, 95.13 %. From case study viewpoint for CNS consideration, a network consisting of Wilson neurons, synapses, and astrocytes have been considered to test the controlling effects on LTP and LTD processes for investigating the neuronal diseases (medical approaches) such as Epilepsy.

An Optimization on the Neuronal Networks Based on the ADEX Biological Model in Terms of LUT-State Behaviors: Digital Design and Realization on FPGA Platforms.

Design and implementation of biological neural networks is a vital research field in the neuromorphic engineering. This paper presents LUT-based modeling of the Adaptive Exponential integrate-and-fire (ADEX) model using Nyquist frequency method. In this approach, a continuous term is converted to a discrete term by sampling factor. This new modeling is called N-LUT-ADEX (Nyquist-Look Up Table-ADEX) and is based on accurate sampling of the original ADEX model. Since in this modeling, the high-accuracy matching is achieved, it can exactly reproduce the spiking patterns, which have the same behaviors of the original neuron model. To confirm the N-LUT-ADEX neuron, the proposed model is realized on Virtex-II Field-Programmable Gate Array (FPGA) board for validating the final hardware. Hardware implementation results show the high degree of similarity between the proposed and original models. Furthermore, low-cost and high-speed attributes of our proposed neuron model will be validated. Indeed, the proposed model is capable of reproducing the spiking patterns in terms of low overhead costs and higher frequencies in comparison with the original one. The properties of the proposed model cause can make it a suitable choice for neuromorphic network implementations with reduced-cost attributes.

Correction: Wang et al. An Optimization on the Neuronal Networks Based on the ADEX Biological Model in Terms of LUT-State Behaviors: Digital Design and Realization on FPGA Platforms. Biology 2022, 11, 1125.

There was an error in the original publication [...].

Application of Wavelet Feature Extraction and Artificial Neural Networks for Improving the Performance of Gas-Liquid Two-Phase Flow Meters Used in Oil and Petrochemical Industries.

Measuring fluid characteristics is of high importance in various industries such as the polymer, petroleum, and petrochemical industries, etc. Flow regime classification and void fraction measurement are essential for predicting the performance of many systems. The efficiency of multiphase flow meters strongly depends on the flow parameters. In this study, MCNP (Monte Carlo N-Particle) code was employed to simulate annular, stratified, and homogeneous regimes. In this approach, two detectors (NaI) were utilized to detect the emitted photons from a cesium-137 source. The registered signals of both detectors were decomposed using a discrete wavelet transform (DWT). Following this, the low-frequency (approximation) and high-frequency (detail) components of the signals were calculated. Finally, various features of the approximation signals were extracted, using the average value, kurtosis, standard deviation (STD), and root mean square (RMS). The extracted features were thoroughly analyzed to find those features which could classify the flow regimes and be utilized as the inputs to a network for improving the efficiency of flow meters. Two different networks were implemented for flow regime classification and void fraction prediction. In the current study, using the wavelet transform and feature extraction approach, the considered flow regimes were classified correctly, and the void fraction percentages were calculated with a mean relative error (MRE) of 0.4%. Although the system presented in this study is proposed for measuring the characteristics of petroleum fluids, it can be easily used for other types of fluids such as polymeric fluids.

X-ray tube with artificial neural network model as a promising alternative for radioisotope source in radiation based two phase flowmeters.

In this paper, X-ray tube is introduced as a potential alternative for radioisotope sources used in radiation based liquid-gas two-phase flowmeters. X-ray tubes have lots of advantages over the radioisotope sources such as having an adjustable emitting photon's energy, being safer from point of view of radiation health physics during the transportation of the source, having ability to generate a high flux photon beam, and etc. The proposed radiation based system in this study composes an X-ray tube with a tube voltage of 150 kV and a 2.5 mm aluminum filter as the radiation source and one sodium iodide crystal as the photon detector. A pipe was positioned between the X-ray tube and the detector. Two main flow regimes of annular and stratified with different void fractions were modelled inside the pipe. Artificial neural network model of multi-layer perceptron (MLP) was also used in this study for analyzing the obtained data. The output spectrum of sodium iodide detector with 150 samples was applied as the input of multi-layer perceptron network and void fraction was considered as its output. The root mean squared error of proposed measuring system was 4.13 which shows the X-ray tube can be implemented as a promising alternative for radioisotope in radiation based two phase flow meters.