Histological and biophysical changes of cassava roots during retting, a key step of fufu processing.

BACKGROUND: Retting is a key step of cassava processing into widely consumed foods (fufu, chikwangue, miondo and bobolo) in sub-Saharan Africa. For some populations, retting ability is a major quality criterion that drives the adoption of new cassava varieties. Despite this importance, the physiological basis associated with this process remains poorly understood, and should lead to improved screening tools for breeding. Eight cassava varieties contrasting in retting ability properties were used in the present study. Roots and soaking water were sampled during retting and characterized at both histological and biochemical levels. RESULTS: Histological data highlighted the degradation of root cell wall during retting. The average pH of soaking water decreased from 5.94 to 4.31 and the average simple sugars decreased from 0.18 to 0 g L-1 , whereas the organic acids increased up to 5.61 g L-1 . In roots tissue, simple sugars and organic acid contents decreased from 22.9 to 0 g kg-1 and from 80 to 0 g kg-1 , respectively. The total pectin content of roots among varieties at harvest was similar, and decreased during the retting process. Overall, there was a negative correlation between total pectins content and root softening, although this did not reach statistical significance. CONCLUSION: Major histological and biochemical changes occurred during cassava root retting, with some of them associated with the process. Retting affected starch pasting properties more than starch content. Although this process is characterized by root softening and degradation of cell wall structure, the present study strongly suggested that pectin is not the only cell wall component involved in these changes. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Genetic and environmental effects on processing productivity and food product yield: drudgery of women's work.

BACKGROUND: Cassava processing is a crucial source of livelihood for rural farmers and processors in Nigeria and Cameroon. This study investigated the varietal effect on the processing productivity of women farmer processors within their working environment and compared this with the food product quality as evaluated by the processors and the field yield. Field trials were established in Nigeria (Benue and Osun state) and Cameroon (Littoral region). Eight cassava genotypes were evaluated. These eight varieties included newly bred genotypes, commercial checks and varieties provided and preferred by the processors. The roots of these genotypes were harvested and processed into gari and eba by processors. The time of each processing step was recorded. Processors assessed the quality of the roots and food products using pairwise ranking. RESULTS: In the field trials in Cameroon and Nigeria (Benue state), the newly bred genotypes showed superior performance in terms of dry matter content and fresh and dry yield. During processing, genotypes showed significant variation for most assessed parameters in both countries. Some newly bred varieties exhibited lower productivity that can make them more prone to drudgery than the local commercial checks and the varieties provided and preferred by the processors. Newly bred varieties were mostly ranked higher or equal to processors' preferred varieties concerning fresh root and food product quality. In the Cameroon location there were significant varietal differences in processing productivity and drudgery index which suggest that the particular processing methods there - such as pressing methods and fermentation time - cause these varietal differences to matter more. CONCLUSIONS: The varieties that were tested were observed to differ in yield, product quality, processing productivity, and potential drudgery levels. Some breeders' germplasms displayed a combination of increased yields and good product quality and good processor productivity. Those varieties that showed low processor productivity should be avoided during selection to avoid increased labour burden and associated drudgery of women processors. Further research is recommended to enhance food product color, latent culinary qualities, and processing productivity of newly bred varieties to improve acceptability and reduce processing drudgery for women. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Drivers of consumer acceptability of cassava gari-eba food products across cultural and environmental settings using the triadic comparison of technologies approach (tricot).

BACKGROUND: Nigeria and Cameroon are multi-ethnic countries with diverse preferences for food characteristics. The present study aimed to inform cassava breeders on consumer-prioritized eba quality traits. Consumer testing was carried out using the triadic comparison of technologies (tricot). Diverse consumers in villages, towns and cities evaluated the overall acceptability of eba made from different cassava genotypes. Data from both countries were combined and linked to laboratory analyses of eba and the gari used to make it. RESULTS: There is a strong preference for eba with higher cohesiveness and eba from gari with higher brightness and especially in Cameroon, with lower redness and yellowness. Relatively higher eba hardness and springiness values are preferred in the Nigerian locations, whereas lower values are preferred in Cameroon. Trends for solubility and swelling power of the gari differ between the two countries. The study also reveals that the older improved cassava genotype TMS30572 is a benchmark genotype with superior eba characteristics across different regions in Nigeria, whereas the recently released variety Game changer performs very well in Cameroon. In both locations, the recently released genotypes Obansanjo-2 and improved variety TM14F1278P0003 have good stability and overall acceptability for eba characteristics. CONCLUSION: The wide acceptance of a single genotype across diverse geographical and cultural conditions in Nigeria, as well as three acceptable new improved varieties in both locations, indicates that consumers' preferences are surprisingly homogeneous for eba. This would enhance breeding efforts to develop varieties with wider acceptability and expand potential target areas for released varieties. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Establishing the linkage between eba's instrumental and sensory descriptive profiles and their correlation with consumer preferences: implications for cassava breeding.

BACKGROUND: Gari and eba, forms of cassava semolina, are mainly consumed in Nigeria and other West African countries. This study aimed to define the critical quality traits of gari and eba, to measure their heritability, to define medium and high throughput instrumental methods for use by breeders, and to link the traits with consumer preferences. The definition of a food product's profiles, including its biophysical, sensory, and textural qualities, and the identification of the characteristics that determine its acceptability, are important if new genotypes are to be adopted successfully. RESULTS: Eighty cassava genotypes and varieties (three different sets) from the International Institute of Tropical Agriculture (IITA) research farm were used for the study. Participatory processing and consumer testing data on different types of gari and eba products were integrated to prioritize the traits preferred by processors and consumers. The color, sensory, and instrumental textural properties of these products were determined using standard analytical methods, and standard operating protocols (SOPs) developed by the RTBfoods project (Breeding Roots, Tubers, and Banana Products for End-user Preferences, https://rtbfoods.cirad.fr). There were significant (P < 0.05) correlations between instrumental hardness and sensory hardness and between adhesiveness and sensory moldability. Principal component analysis showed broad discrimination amongst the cassava genotypes and the association of the genotypes concerning the color and textural properties. CONCLUSIONS: The color properties of gari and eba, together with instrumental measures of hardness and cohesiveness, are important quantitative discriminants of cassava genotypes. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Composition and Functional Effect of Mango (Mangifera indica L.) Almond Flours on Wheat Dough Rheology.

Composition and technofunctional properties of the almond flours of 12 mango varieties from savannah zones of Cameroon (Central Africa) are assessed in order to highlight their potential use in breadmaking, through their effect on dough rheology. The compositions of almonds display starch as the major constituent (60-65%) with more than 80% of amylopectin and a significant presence of phenolic compounds (1-7%), lipids (7-13%), and proteins (4-7%), depending on mango varieties, with local varieties showing the highest polyphenol and lipid contents. Almond flours are characterized by high WAC (water absorption capacity) and OAC (oil absorption capacity) and pasting properties influenced by starch lipid and starch protein complexes. In wheat-mango almond composite flours, the pasting properties are mango variety and almond flour treatment (native or delipidated) dependent, with a substitution threshold effect variable from one variety to another. Alveographic profiles of the composite flours result in dough characterized by high tenacity (P) but low swelling index (G) and baking strength (W). These effects are intensified with increasing substitution of wheat. However, up to 10% wheat substitution, the composite flours seem acceptable in breadmaking, with 9 mango varieties hypothetically convenient for the reduction of bread staling.

Ipomea batatas Leaf Powder from Cameroon: Antioxidant Activity and Antihyperlipidemic Effect in Rats Fed with a High-Fat Diet.

The present study consists of analyzing the phytochemical composition of Ipomoea batatas leaf powders and evaluating their antihyperlipidemic effect on rats receiving a high-fat diet. Ipomoea batatas leaves were collected from four agroecological areas of Cameroon, and powders were obtained after washing, drying, grinding, and sieving. Standard analytical methods were used to determine the phytochemical composition of two varieties (IRAD-tib1yellow-V1 and IRAD-1112white-V2) from North Z1, Adamawa Z2, West Z3, Center Z4. The effect of I. batatas leaf powder on lipid metabolism was assessed in vivo by feeding different groups of rats with a high-fat diet supplemented with 5 and 10% of I. batatas leaf powder during 30 days. At the end of the experimentation, total cholesterols, triglycerides, LDL- (low-density lipoprotein-) cholesterol, HDL- (High-density lipoprotein-) cholesterol, ASAT (aspartate aminotransferase), ALAT (alanine aminotransferase), and creatinine were measured using commercial enzymatic kits (Spinreact, Spain). The results of phytochemical analysis of I. batatas leaf powders revealed that the total phenol content ranged from 660.173 mg GAE/100 gDW (Z1V2) to 657.76 mg GAE/100 gDW (Z3V2), the flavonoids content ranged from 282.25 mgEC/100 gDW (Z3V1) to 325.05 mgEC/100 gDW (Z4V2), and the anthraquinone content ranged from 324.05 mg/100 gDW (Z3V2) to 326.72 mg/100 gDW (Z4V2). The total antioxidant capacity ranged from 19.00 (Z1V1) to 23.48 mg AAE/gDW (Z3V2), while the IC50 ranged from 1.58 mg/mL (Z1V1) to 3.08 mg/mL (Z3V2). Rats fed a high-fat diet and supplemented with 5 and 10% of I. batatas leaf powder showed a significant (p < 0.05) reduction in body weight compared to the control with a reduction rate ranging from 6 to 10%. The consumption of I. batatas leaf powder for 30 days significantly (p < 0.05) reduced serum total cholesterol, LDL-cholesterol, triglycerides, ALAT, and creatinine level. These results suggest the use of I. batatas leaves as a phytomedicine in the treatment of cardiovascular diseases.

A review of cassava semolina (gari and eba) end-user preferences and implications for varietal trait evaluation.

The purpose of this review is to support breeders and food scientists by examining research carried out on end-user preferences for gari and its derived dough product, eba, in Africa. The review focused on gari regarding the physical and chemical composition of raw cassava roots, methods of storage, the composition of gari with or without enrichment, and the sensory evaluation of gari and eba. The primary sensory attributes identified to describe gari are colour, taste, texture, aroma and flavour. Texture attribute of importance is crispiness for uncooked gari, and hand feel before consumption for eba. There was a significant correlation between the sensory characteristics of gari and the starch and cyanogenic potential (CNP) contents of the raw roots. Hence, the correlation of the end-user preferences with the chemical composition of the cassava roots could be helpful to breeders in refining selection criteria and developing high-throughput screening methods.

From cassava to gari: mapping of quality characteristics and end-user preferences in Cameroon and Nigeria.

User's preferences of cassava and cassava products along the value chain are supported by specific root quality characteristics that can be linked to root traits. Therefore, providing an evidence base of user preferred characteristics along the value chain can help in the functional choice of cassava varieties. In this respect, the present paper presents the results from focus group discussions and individual interviews on user preferred quality characteristics of raw cassava roots and the derived product, gari, - one of the major cassava products in Sub-Saharan Africa - in major production and consumption areas of Cameroon and Nigeria. Choice of cassava varieties for farming is mainly determined by the multiple end uses of the roots, their agricultural yield and the processing determinants of roots that support their major high-quality characteristics: size, density, low water content, maturity, colour and safety. Processing of cassava roots into gari goes through different technological variants leading to a gari whose high-quality characteristics are dryness, colour, shiny/attractive appearance, uniform granules and taste. Eba, the major consumption form of gari in Cameroon and Nigeria, is mainly characterised by its textural properties: smoothness, firmness, stickiness, elasticity and mouldability. Recommendations are made, suggesting that breeding will have to start evaluating cassava clones for brightness/shininess, as well as textural properties such as mouldability and elasticity of cassava food products, for the purpose of supporting decision-making by breeders and the development of high-throughput selection methods of cassava varieties. Women are identified as important beneficiaries of such initiatives giving their disadvantaged position and their prominent role in cassava processing and marketing of gari.

Biological properties and structural characterization of a novel rhamnolipid like-biosurfactants produced by Lactobacillus casei subsp. casei TM1B.

Biosurfactants are microbial surface-active compounds with antimicrobial and antioxidant activities that display a range of physiological functions. In this study, a strain isolated from a Cameroonian fermented milk "pendidam" and identified as Lactobacillus casei subsp. casei TM1B was used for biosurfactants production. The biosurfactants produced by L. casei TM1B with molasses as the substrate had a good surface (40.77 mN/m) and emulsifying (84.50%) activities. The scavenging of the ABTS+• radical (IC50 value of 0.60 ± 0.03 mg/mL) by the biosurfactants was found to be higher than that of DPPH• radical (IC50 value of 0.97 ± 0.13 mg/mL). The maximum chelating activity of biosurfactants (82.29%) was observed at 3.5 mg/mL. The biologically active compound of the biosurfactants produced by L. casei TM1B was identified as 2,5-O-methylrhamnofuranosyl-palmitate, a novel rhamnolipid-like biosurfactant by using chemical, Fourier transform infrared spectroscopy, gas chromatography-mass spectrometry, and NMR analysis. The biosurfactants were bactericidal against several Gram-negative and Gram-positive pathogens (minimum inhibitory concentration values ranged from 3.22 to 12.83 mg/mL), and scanning electron microscope analysis revealed bacterial cell walls and membranes as main targets.

Synergistic interactions in dilute aqueous solutions between alginate and tropical vegetal hydrocolloids.

Encapsulation in alginate beads has always been limited by the leakage due to the too wide distribution of pore sizes. Mixing alginate with other polymers have sometimes reduced the problem. Hydrocolloids from seven tropical vegetal species (barks of Triumfetta cordifolia and Bridelia thermifolia, seeds of Irvingia gabonensis and Beilschmiedia obscura, and leaves of Ceratotheca sesamoides, Adansonia digitata and Corchorus olitorius) were screened for synergistic interactions with alginate in dilute aqueous solution. Mixtures with alginate were made at different volume proportions and deviations from the initial viscosity set at 1 were evaluated. In distilled water, the gums from T. cordifolia, B. obscura, C. sesamoides and C. olitorius presented synergies with alginate. In 2 mM calcium chloride, the seven gums showed positive synergy. Interactions are favored by gum flexibility and the presence of charges, although high charges reduced the interactions. Alginate fraction of maximum viscosity enhancement depends on the ability to conformational order of the gum. The measure by laser diffraction of alginate-gum particles sizes at different fractions showed that the cooperative interactions did not always involve the largest complexes formed in gums associations. The occurrence of these interactions predicts the formation of homogeneous mixed gels at higher polymer and calcium concentrations.

Innovation in Tigernut (Cyperus Esculentus L.) Milk Production: In Situ Hydrolysis of Starch.

Tigernut tubers (Cyperus esculentus) are used for the production of vegetable milk, commonly known as "Horchata de chufa" in Spain. The presence of starch in the tuber limits the yield of the milk, since this carbohydrate gelatinizes during the pasteurization of the milk and leads to the considerable solidification of this drink. The present work aims to improve the yields and extraction practice of the milk by an in situ hydrolysis of starch, using exogenous amylases of industrial or vegetable origin. The obtained results show that sprouting improves the extraction yields of tigernut milk, which goes from 50% to about 70%. This improvement in milk yield corresponds to a hydrolysis of about 35% of the starch in the tuber. The use of exogenous amylases leads to starch hydrolysis rates of 45% and 70%, respectively, for amylolytic extracts from sprouted tigernut tubers and amylase, with the corollary of a natural increase in the sweetness of milk. This technical approach makes it possible to produce a naturally sweetened tigernut milk which easily lends itself to pasteurization without a significant increase in viscosity.

Chemistry and functionalities of lake deposits and plant-based salts used in food preparations: A review.

Lake deposits, plant-based ashes, filtrates and evaporites or alkaline salts are used traditionally in food preparations by local populations in Africa, Asia, South America, and Oceania. Depending on the context, traditional alkaline salts are used to reduce cooking times, improve rheological characteristics of starchy doughs, maintain the color of vegetables, improve the viscosity of sticky vegetables, and act as emulsifiers. This review highlights some of the relationships among chemical composition and physicochemical properties of traditional alkaline salts when used in solution as well as their functionalities. In addition, their potential toxicity and physiological effects are explored, which might lead to a better understanding of some previously unexplained functionalities and future trends in research, such as their impact on human health.

Application of empirical Peleg model to study the water adsorption and mineral desorption of cocoa (Theobroma cacao) beans in water and sodium bicarbonate during debittering process.

The ability of water and sodium bicarbonate solution in producing debittering cocoa bean for immediate consumption as ready to cook food and the applicability of empirical Peleg model in order to interpret the sorption data is evaluated in this study. Fermented cocoa beans were soaked and/or boiled in water and in 2% sodium bicarbonate solution with a weight to volume ratio of 1:10. Cocoa beans were withdrawn at each interval over a 6-h time period and moisture and minerals (calcium, magnesium, phosphorus and potassium) content analyzed using standard analytical methods. Bitterness was measured by sensory analysis. Peleg model was used to transform the sorption data into the mathematical equation and Peleg parameters K1, K2 and Me calculated. It has been found that boiling in water and sodium bicarbonate (2%) significantly reduces the bitterness of cocoa beans. Kinetic curves of water absorption express the characteristic shape with a fast water absorption rate at the beginning of the process follow by a decreasing rate as the equilibrium moisture is reached. Mineral desorption curves exhibited unusual pattern depending on the mineral under consideration. Application of sorption data demonstrates a predictive capacity of the Peleg model as judged by the regression coefficients. Boiling cocoa beans for 50 min in 2% sodium bicarbonate and 30 min in boiling water can be considered as optimal for debittering cocoa beans in order to give them palatable option to be integrated in nutrition and in none medicinal therapeutics in Cameroon.

Effect of Different Carbon Sources on Biosurfactants' Production by Three Strains of Lactobacillus spp.

The potential of three indigenous bacterial strains (Lactobacillus delbrueckii N2, Lactobacillus cellobiosus TM1, and Lactobacillus plantarum G88) for the production of biosurfactants using sugar cane molasses or glycerol as substrates was investigated through emulsifying, surface tension, and antimicrobial activities. The different biosurfactants produced with molasses as substrate exhibited high surface tension reduction from 72 mN/m to values ranged from 47.50 ± 1.78 to 41.90 ± 0.79 mN/m and high emulsification index ranging from 49.89 ± 5.28 to 81.00 ± 1.14%. Whatever the Lactobacillus strain or the substrate used, the biosurfactants produced showed antimicrobial activities against Candida albicans LV1, some pathogenic and/or spoilage Gram-positive and Gram-negative bacteria. The yields of biosurfactants with molasses (2.43 ± 0.09 to 3.03 ± 0.09 g/L) or glycerol (2.32 ± 0.19 to 2.82 ± 0.05 g/L) were significantly (p < 0.05) high compared to those obtained with MRS broth as substrate (0.30 ± 0.02 to 0.51 ± 0.09 g/L). Preliminary characterization of crude biosurfactants reveals that they are mainly glycoproteins and glycolipids with molasses and glycerol as substrate, respectively. Therefore, sugar cane molasses or glycerol can effectively be used by Lactobacillus strains as low-cost substrates to increase their biosurfactants production.

Optimization of vegetable milk extraction from whole and dehulled Mucuna pruriens (Var Cochinchinensis) flours using central composite design.

Extraction conditions for maximum values of protein yield, protein content, sugar content and dry matter of vegetable milk extracts from dehulled Mucuna cochinchinensis bean flour and whole Mucuna cochinchinensis bean flour were investigated using response surface methodology. A Central Composite Design (CCFD) with three factors: temperature (25 to 95 °C); extraction time (6 to 74 min.) and water to flour ratio (6 to 24 mL/g) were used. Data analysis showed that all the factors significantly (p < 0.05) affected the responses variables. The optimal conditions determined for extraction were temperature 63-66 °C, water to flour ratio 12-13 mL/g and extraction time of 57-67 min. At these optimum points the protein and sugar contents, extraction yield of protein and dry matter were respectively 14.0 g/100 mL, 4.8 g/100 mL, 53.8 g/100 g, 12.1 g/100 g for vegetable milk produced from dehulled M. cochinchinensis bean flour and 6.4 g/100 mL, 3.5 g/100 mL, 50.0 g/100 g and 8.0 g/100 g for vegetable milk extracted from whole M. cochinchinensis bean flour milk. The optimal condition was verified at the optimum points for model validation and the response values were not significantly different from the predicted values.

Microbial interactions for enhancement of α-amylase production by Bacillus amyloliquefaciens 04BBA15 and Lactobacillus fermentum 04BBA19.

Interactions occurring between Saccharomyces cerevisiae and two thermostable α-amylase producing strains (Bacillus amyloliquefaciens 04BBA15 and Lactobacillus fermentum 04BBA19) were analyzed by comparing their growth patterns obtained in isolation with those obtained in mixture. The difference between the patterns was assessed using analysis of variance (ANOVA) in order to measure how much the growth of an organism was affected by other. The results showed two types of interactions in mixed culture; commensalism between S. cerevisiae and B. amyloliquefaciens 04BBA15 and mutualism between S. cerevisiae and L. fermentum 04BBA19. In mixed culture, the α-amylase production increased significantly compared to that observed in monoculture (P < 0.05). Response surface optimization of fermentation parameters in mixed cultures (initial yeast to bacteria ratio 1.125, temperature 33.5 °C, pH 5.5) resulted in about 1.8 fold higher enzyme production than that observed in the unoptimized fermentation.

Nutrient content of complementary foods based on processed and fermented sorghum, groundnut, spinach, and mango.

BACKGROUND: Many African mothers use gruels made of maize and sorghum as complementary foods for their infants because they cannot afford the cost of nutritionally superior commercial weaning foods. OBJECTIVE: To improve the nutritional quality of traditional sorghum gruels used as complementary foods for children between six months and five years in the northern part of Cameroon. METHODS: Sorghum grains were processed by dehulling, sprouting, dehulling and cooking, and sprouting and cooking, then fermented using Saccharomyces cerevisae and tested for nutritional quality. The processed samples were analyzed for their nutrient composition and the digestibility of proteins and carbohydrates. RESULTS: The resulting products showed a significant reduction in antinutritional factors (e.g., phenolic compounds and phytates). In addition, germination improved the in vitro digestibility of proteins and carbohydrates. These effects were enhanced by fermentation of the resulting sorghum flour, regardless of how grains were pretreated, although the protein and mineral content remained low. Use of a composite flour made from pretreated sorghum, groundnut, spinach, and mango improved the protein, mineral, and vitamin A and C content of the gruels. Fermentation of composite flours resulted in an improvement in the protein content. CONCLUSIONS: This study, conducted under local conditions and using local technology, describes an opportunity for improving the quality of complementary foods using local ingredients.