Analysis of nitrifying bacteria growth on two new types of biomass carrier using respirometry and molecular genetic methods.

This work addresses the testing of two newly produced biomass carriers (micro- and nanofibers) and one commercially available AnoxKaldnes™ K3 carrier in a laboratory post-nitrification reactor. The carriers were prepared under parameters suitable for high-quality biomass adhesion to their surface, and each was characterized by its specific structures. As part of the evaluation of the biofilms using respirometry and molecular genetic methods, the carriers were assessed in terms of their effectiveness and comparability. The rate of biofilm development was dependent on the structure and surface properties of the individual carriers. The results showed that the biofilm most strongly adhered to nanofiber carriers, where nitrating bacteria's slower but more abundant development occurred. Microfiber carriers were more stable, but a diverse internal structure may be unsuitable in a populated carrier's early stages. The AnoxKaldnes™ K3 carriers showed the slowest growth of biofilm, but the monitored nitrifying bacteria were abundant after an extended time. AOB representatives are likely to prefer an environment with a high amount of biomass and a large active area. Conversely, NOB representatives thrive better in a slowly forming biofilm. The methods used to monitor biofilm are challenging to compare directly, but they do complement each other, which aids in verifying the individual test results. Developing new types of biomass carriers with the potential for high-quality adhesion of microorganisms is a prerequisite for the expansion of highly efficient biotechnological processes, especially for wastewater treatment.

Application of nanofiber carriers for sampling of microbial biomass from contaminated groundwater.

Sampling of microbial biomass is crucial for understanding and controlling remediation processes ongoing at contaminated sites in general, particularly when molecular genetic analyses are employed. In this study, fiber-based carriers with a nanofiber layer were developed and tested as a method to sample microbial biomass in groundwater for molecular genetic analysis. Nanofiber carriers, varying in the shape and the linear density of nanofibers, were examined throughout a 27-month monitoring period in groundwater contaminated with benzene, toluene, ethylbenzene and xylene isomers (BTEX), and chlorinated ethenes. The effect of carrier shape and nanofiber layer density on the microbial surface colonization and composition of the microbial biofilm was determined using real-time PCR and next-generation sequencing (NGS) analysis. Differences in microbial community composition between nanofiber carriers, groundwater, and soil samples were also analyzed to assess the applicability of carriers for biomass sampling at contaminated sites. The nanofiber carriers showed their applicability as a sampling tool, particularly because of their easy manipulation that facilitates DNA isolation. The majority of taxa (Proteobacteria, Firmicutes, and Bacteroidetes) present on the carrier surfaces were also detected in the groundwater. Moreover, the microbial community on all nanofiber carriers reflected the changes in the chemical composition of groundwater. Although the carrier characteristics (shape, nanofiber layer) did not substantially influence the microbial community on the carrier surface, the circular and planar carriers with a nanofiber layer displayed faster microbial surface colonization. However, the circular carrier was the most suitable for biomass sampling in groundwater because of its high contact area and because it does not require pre-treatment prior to DNA extraction.

Engineered in situ biogeochemical transformation as a secondary treatment following ISCO - A field test.

ISCO using activated sodium persulphate is a widely used technology for treating chlorinated solvent source zones. In sensitive areas, however, high groundwater sulphate concentrations following treatment may be a drawback. In situ biogeochemical transformation, a technology that degrades contaminants via reduced iron minerals formed by microbial activity, offers a potential solution for such sites, the bioreduction of sulphate and production of iron sulphides that abiotically degrade chlorinated ethenes acting as a secondary technology following ISCO. This study assesses this approach in the field using hydrochemical and molecular tools, solid phase analysis and geochemical modelling. Following a neutralisation and bioaugmentation, favourable conditions for iron- and sulphate-reducers were created, resulting in a remarkable increase in their relative abundance. The abundance of dechlorinating bacteria (Dehalococcoides mccartyi, Dehalobacter sp. and Desulfitobacterium spp.) remained low throughout this process. The activity of iron- and sulphate-reducers was further stimulated through application of magnetite plus starch and microiron plus starch, resulting in an increase in ferrous iron concentration (from