Chemical, structural and cytotoxicity characterisation of experimental fluoride-doped calcium phosphates as promising remineralising materials for dental applications.

OBJECTIVES: This study aimed at evaluating the cytotoxicity, chemical and structural properties of experimental fluoride-doped calcium-phosphates as potential remineralising materials for dental applications. METHODS: Experimental calcium phosphates were formulated using ß-tricalcium phosphate, monocalcium phosphate monohydrate, calcium hydroxide, and different concentrations of calcium/sodium fluoride salts [(5 wt%: VSG5F), (10 wt%: VSG10F), (20 wt%: VSG20F)]. A fluoride-free calcium phosphate (VSG) was used as control. Each tested material was immersed in simulated body fluid (SBF), (24 h, 15 and 30 days) to assess their ability to crystallise into apatite-like. Cumulative fluoride release was assayed up to 45 days. Moreover, each powder was placed into a medium containing human dental pulp stem cells (200 mg/mL) and their cytotoxicity was analysed using the 3-(4,5-dimethylthiazol-2-yl)- 2,5-diphenyltetrazolium bromide (MTT) assay (24 h, 48 h and 72 h incubation). These latter results were statistically analysed by ANOVA and Tukey's test (α = 0.05). RESULTS: All the experimental VSG-F materials produced fluoride-containing apatite-like crystals after SBF immersion. VSG20F presented prolonged release of fluoride ions into the storage media (45d). VSG, VSG10F and VSG20F showed a significant cytotoxicity at dilution of 1:1, while at 1:5, only VSG and VSG20F demonstrated a reduction in cell viability. At lower dilutions (1:10, 1:50 and 1:100) all specimens showed no significant toxicity to hDPSCs, but an increase in cell proliferation. SIGNIFICANCE: The experimental fluoride-doped calcium-phosphates are biocompatible and possess a clear ability to evoke fluoride-containing apatite-like crystallisation. Hence, they may be promising remineralising materials for dental applications.

Non-chromatographic arsenic speciation analyses in wild shrimp (Farfantepenaeus brasiliensis) using functionalized magnetic iron-nanoparticles.

A new iron-magnetic nanomaterial functionalized with organophosphorus compound was used as solid-phase for arsenic speciation analysis in seafood samples by ICP-MS. The procedure was optimized using chemometric tools and the variables pH = 4.0, 15 min extraction time, and 20 mg of mass of material were obtained as the optimum point. The inorganic arsenic (iAs) extracted using nanoparticles presented concentrations between 20 and 100 µg kg-1 in the evaluated samples. The method was validated for accuracy using CRMs DOLT-5 and DORM-4. It was possible to reuse the same magnetic nanomaterial for 6 successive cycles, and we obtained a detection limit of 16.4 ng kg-1. The proposed method is suitable for the use of inorganic speciation of As, presenting good accuracy, precision, relatively low cost, and acquittance to green chemistry principles.

A new heterofunctional support for enzyme immobilization: PEI functionalized Fe3O4 MNPs activated with divinyl sulfone. Application in the immobilization of lipase from Thermomyces lanuginosus.

Lipase from Thermomyces lanuginosus (TLL) was immobilized onto a novel heterofunctional support, divinyl sulfone (DVS) superparamagnetic nanoparticles (SPMNs) functionalized with polyethyleneimine (PEI). Particle size and zeta potential measurements, elemental analysis, X-ray powder diffraction, magnetic measurements, and infrared spectroscopy analysis were used to characterize the TLL preparations. At pH 10, it was possible to achieve 100 % of immobilization yield in 1 h. The immobilization pH gives TLL preparations with different stabilities; indeed the TLL preparation immobilized at pH 5.0 was the most stable during the thermal inactivation at all pH values. For the hydrolysis of racemic methyl mandelate, the nanobiocatalysts immobilized at pH 5.0 and blocked with ethylenediamine (EDA) and ethanolamine (ETA) obtained good enantioselectivities (68 % and 72 %, respectively) with high catalytic activities in the reaction medium at pH 7.0. The operational stability of the systems was evaluated in the esterification reaction of benzyl alcohol, obtaining up to 61 % conversion after the seventh reaction cycle. These results show that SPMN@PEI-DVS support is a robust strategy for the easy and rapid recovery of the nanobiocatalyst by applying a magnetic field, showing great potential for industrial applications.

Ethyl Butyrate Synthesis Catalyzed by Lipases A and B from Candida antarctica Immobilized onto Magnetic Nanoparticles. Improvement of Biocatalysts' Performance under Ultrasonic Irradiation.

The synthesis of ethyl butyrate catalyzed by lipases A (CALA) or B (CALB) from Candida antarctica immobilized onto magnetic nanoparticles (MNP), CALA-MNP and CALB-MNP, respectively, is hereby reported. MNPs were prepared by co-precipitation, functionalized with 3-aminopropyltriethoxysilane, activated with glutaraldehyde, and then used as support to immobilize either CALA or CALB (immobilization yield: 100 ± 1.2% and 57.6 ± 3.8%; biocatalysts activities: 198.3 ± 2.7 Up-NPB/g and 52.9 ± 1.7 Up-NPB/g for CALA-MNP and CALB-MNP, respectively). X-ray diffraction and Raman spectroscopy analysis indicated the production of a magnetic nanomaterial with a diameter of 13.0 nm, whereas Fourier-transform infrared spectroscopy indicated functionalization, activation and enzyme immobilization. To determine the optimum conditions for the synthesis, a four-variable Central Composite Design (CCD) (biocatalyst content, molar ratio, temperature and time) was performed. Under optimized conditions (1:1, 45 °C and 6 h), it was possible to achieve 99.2 ± 0.3% of conversion for CALA-MNP (10 mg) and 97.5 ± 0.8% for CALB-MNP (12.5 mg), which retained approximately 80% of their activity after 10 consecutive cycles of esterification. Under ultrasonic irradiation, similar conversions were achieved but at 4 h of incubation, demonstrating the efficiency of ultrasound technology in the enzymatic synthesis of esters.

Comparison of the immobilization of lipase from Pseudomonas fluorescens on divinylsulfone or p-benzoquinone activated support.

NiZnFe2O4 superparamagnetic nanoparticles were coated with silica by impregnation with tetraethoxysilane (TEOS) and further activated with divinylsulfone (DVS) and p-benzoquinone (BQ) for covalent immobilization lipase from Pseudomonas fluorescens (PFL), producing the biocatalysts TEOS-NANO-DVS-PFL and TEOS-NANO-BQ-PFL. The optimal conditions for enzyme immobilization were found to be pH 7 and 0.1 M of both activating reagents. PFL was also immobilized on TEOS nanoparticles without any activation as a reference (TEOS-NANO-PFL). Results indicated that TEOS could be released from the nanoparticles at alkaline pH value. Optimal TEOS-NANO-PFL exhibited a recovered activity of 55% and a t1/2(60°C) of just over 150 min; while TEOS-NANO-DVS-PFL showed 82% of activity recovered and t1/2(60°C) of 225 min; being the TEOS-NANO-BQ-PFL the biocatalyst offering the best results (89% of recovered activity and a half-life over 1440 min), the maximum enzyme load was ≈300 U/g.