A Novel Polyurethane-Based Polyion Complex Material with Tunable Selectivity against Interferents for Selective Dopamine Determination.

Polyion complex (PIC) materials have been widely used in biosensors due to their molecular selectivity. However, achieving both widely controllable molecular selectivity and long-term solution stability with traditional PIC materials has been challenging due to the different molecular structures of polycations (poly-C) and polyanions (poly-A). To address this issue, we propose a novel polyurethane (PU)-based PIC material in which the main chains of both poly-A and poly-C are composed of PU structures. In this study, we electrochemically detect dopamine (DA) as the analyte and L-ascorbic acid (AA) and uric acid (UA) as the interferents to evaluate the selective property of our material. The results show that AA and UA are significantly eliminated, while DA can be detected with a high sensitivity and selectivity. Moreover, we successfully tune the sensitivity and selectivity by changing the poly-A and poly-C ratios and adding nonionic polyurethane. These excellent results were employed in the development of a highly selective DA biosensor with a detection range from 500 nM to 100 µM and a 3.4 µM detection limit. Overall, our novel PIC-modified electrode has the potential to advance biosensing technologies for molecular detection.

Electrochemistry in bicontinuous microemulsions derived from two immiscible electrolyte solutions for a membrane-free redox flow battery.

HYPOTHESES: Bicontinuous microemulsions (BMEs) have attracted attention as unique heterogeneous mixture for electrochemistry. An interface between two immiscible electrolyte solutions (ITIES) is an electrochemical system that straddles the interface between a saline and an organic solvent with a lipophilic electrolyte. Although most BMEs have been reported with nonpolar oils, such as toluene and fatty acids, it should be possible to construct a sponge-like three-dimensionally expanded ITIES comprising a BME phase. EXPERIMENTS: Dichloromethane (DCM)-water microemulsions stabilized by a surfactant were investigated in terms of the concentrations of co-surfactants and hydrophilic/lipophilic salts. A Winsor III microemulsion three-layer system, consisting of an upper saline phase, a middle BME phase, and a lower DCM phase, was prepared, and electrochemistry was conducted in each phase. FINDINGS: We found the conditions for ITIES-BME phases. Regardless of where the three electrodes were placed in the macroscopically heterogeneous three-layer system, electrochemistry was possible, as in a homogeneous electrolyte solution. This indicates that the anodic and cathodic reactions can be divided into two immiscible solution phases. A redox flow battery comprising a three-layer system with a BME as the middle phase was demonstrated, paving the way for applications such as electrolysis synthesis and secondary batteries.

Evaluation of factors affecting epidermal growth factor receptor tyrosine kinase inhibitor-induced hepatotoxicity in Japanese patients with non-small cell lung cancer: a two-center retrospective study.

BACKGROUND: Gefitinib and erlotinib, are epidermal growth factor receptor tyrosine kinase inhibitors, and are currently recommended for non-small cell lung cancer stage IV in the elderly and in patients with decreased performance status in the Japanese Lung Cancer Society Guideline, but they occasionally caused severe hepatotoxicity requiring postponement or modification of treatment. However, little is known about the risk factors for hepatotoxicity in patients receiving gefitinib and erlotinib. In this study, we investigated the factors influencing hepatotoxicity in Japanese non-small cell lung cancer (NSCLC) patients treated with gefitinib or erlotinib monotherapy. METHODS: Japanese patients with NSCLC who started gefitinib or erlotinib monotherapy from January 2005 to December 2017 at Kanazawa University Hospital or Kanazawa Medical University Hospital were included in this study. Factors affecting hepatotoxicity were retrospectively investigated by multiple logistic regression analysis. RESULTS: A total of 102 patients who received gefitinib and 95 patients who received erlotinib were included in the analysis. In the gefitinib group, a body mass index (BMI) ≥ 25 was associated with an increased risk of hepatotoxicity (OR = 4.571, 95% CI = 1.486-14.056, P = 0.008). In the erlotinib group, concomitant use of acid-suppressing medications (AS), namely proton pump inhibitors or histamine-2 receptor antagonists, was associated with a reduced risk of hepatotoxicity (OR = 0.341, 95% CI = 0.129-0.900, P = 0.030). CONCLUSIONS: BMI ≥ 25 in patients treated with gefitinib increased the risk of hepatotoxicity. In contrast, AS combination with erlotinib reduced the risk of hepatotoxicity. Thus, because different factors influence the risk of hepatotoxicity, monitoring for adverse events should take into account patient background factors and concomitant medications.

Vertically Oriented Metallic Heterodimer Array Semiembedded in Flat Conductive Carbon Film for Electrochemical Application.

General synthesis of a highly oriented metallic heterodimer array based on a selective electrodeposition technique onto a metal nanoparticle-embedded carbon film is proposed, which enables the preparation of heterodimers with a wide variety of metal combinations. This method requires no surfactant, capping agent, organic solvent, or heat treatment. As a representative metal combination, a nickel (Ni)/palladium (Pd) heterodimer array was prepared by selective electrodeposition of Ni nanoparticles (Ni NPs) on top of partially exposed Pd NPs embedded in carbon film electrodes fabricated by a cosputtering technique. Such a selective electrodeposition becomes possible by utilizing the difference in electrodeposition overpotentials between carbon and Pd NP surfaces. X-ray photoelectron spectroscopy revealed a charge transfer from Ni NPs to Pd NPs, implying that the catalytic and optical properties can be expected to be controllable. The formed heterodimer array structure was mechanically stable against ultrasonication in ethanol for over 1 h because most parts of the Pd NPs were tightly embedded in the carbon film. After conversion from Ni to nickel hydroxide (Ni(OH)2), the electrode showed high electrocatalytic activity toward glucose oxidation, with a higher turnover rate and lower overpotential compared to Ni(OH)2 electrodeposited on pure carbon film electrodes.

Development of a highly sensitive Prussian-blue-based enzymatic biosensor for L-carnitine employing the thiol/disulfide exchange reaction.

This is the first report of conducting proof-of-concept study for amperometric acetyltransferase-based L-carnitine sensor by employing the thiol/disulfide exchange reaction. The carnitine acetyltransferase (CrAT) catalyzes the reaction between acetyl-CoA and L-carnitine to produce CoA which is difficult to detect directly by electrochemical methods owing to steric hindrance and electrostatic effect of CoA. The thiol/disulfide exchange reaction between CoA and cystamine was mediated in the enzymatic reaction to produce electrochemically detectable low molecular weight of cationic cysteamine. The sensor exhibited high sensitivity and selectivity for L-carnitine in the concentration range 0.28-50 µM with a limit of detection of 0.28 µM. This is a promising strategy for L-carnitine sensing in point-of-care testing applications.

Factors Affecting Incomplete L5/S Posterior Lumbar Interbody Fusion, Including Spinopelvic Sagittal Parameters.

STUDY DESIGN: Retrospective observational study. PURPOSE: In this study we identify risk factors, including patient demographics, sagittal parameters, and clinical examinations, affecting incomplete L5/S posterior lumbar interbody fusion (PLIF). OVERVIEW OF LITERATURE: The lumbosacral spine is considered to have an interbody fusion rate lower than that of the lumbar spine, but few studies have investigated the cause, including investigating the pelvis. We believe that pelvic morphology can affect L5/S interbody fusion of the lumbosacral spine. METHODS: We observed 141 patients (61 men, 80 women; average age, 65.8 years) who had undergone PLIF and checked for the presence of L5/S interbody fusion. We investigated factors such as age, gender, the presence of diffuse idiopathic skeletal hyperostosis (DISH), fusion level, and grade 2 osteotomy, as well as pre-, post-, and post-preoperative L5/S disk height and angle, lumbar lordosis, Visual Analog Scale (VAS) score, Japanese Orthopaedic Association (JOA) score, and pelvic incidence (PI), comparing those with and without L5/S interbody fusion. In addition, we analyzed the patients classified into short-level (n=111) and multi-level fusion groups (n=30). RESULTS: Overall, the L5/S interbody fusion rate was 70% (short-level, 78%; multi-level, 40%). Age and pre- and post-preoperative L5/S disk angle were significantly different in each fusion level group. DISH presence, grade 2 osteotomy, and postoperative VAS and JOA scores were significantly different in the short-level fusion group, whereas PI was significantly different in the multi-level fusion group. CONCLUSIONS: Incomplete union after L5/S PLIF correlates with advanced age, many fusion levels, and a large value of preoperative and a small value of post-preoperative L5/S disk angles.

The influence mechanism of the molecular structure on the peak current and peak potential in electrochemical detection of typical quinolone antibiotics.

Antibiotic pollution in water has become an increasingly serious problem, posing a potentially huge threat to human health. Ofloxacin (OFL), norfloxacin (NOR), and enoxacin (ENX) are typical broad-spectrum quinolone antibiotics, which are frequently detected in various water environments. An electrochemical sensor is a rapid and effective tool to detect antibiotics in the aquatic environment. The molecular structure of target pollutants is an important factor affecting the detection performance of electrochemical sensors. Based on the electrochemical detection results of antibiotics (OFL, NOR, and ENX), we first used the molecular structure analysis method based on quantum chemistry to accurately identify the electronegativity and the electrocatalytic degree of the oxidizable (and non-oxidizable) functional groups of pollutants. We also clarified the influence mechanism of the molecular structure on the peak current and peak potential. These results can provide theoretical support for rapidly selecting electrodes with a suitable electrochemical window to efficiently detect trace organic pollutants (such as antibiotics) in water based on the molecular structure of the target pollutant.

Fabrication of Biosensing Interface with Monolayers.

Surface modification is recognized as one of the fundamental techniques to fabricate biosensing interfaces. This review focuses on the surface modification of carbon substrates (GC and HOPG) and silica with a close-packed monolayer, in particular. In the cases of carbon substrates, GC and HOPG, it was demonstrated that surface modification of carbon substrates with diazonium derivatives could create a close-packed monolayer similar to the self-assembled monolayer (SAM) formation with mercapto derivatives. Similarly, the potential of trialkoxysilanes to form a close-packed monolayer was evaluated, and modification with a close-packed monolayer tended to occur under milder conditions when the trialkoxysilanes had a longer alkyl chain. In these studies, we synthesized surface modification materials having ferrocene as a redox active moiety to explore features of the modified surfaces by an electrochemical method using cyclic voltammetry, where surface concentrations of immobilized molecules and blocking effect were studied to obtain insight for density leading to a close-packed layer. Based on those findings, fabrication of a biosensing interface on the silica sensing chip of the waveguide-mode sensor was carried out using triethoxysilane derivatives bearing succinimide ester and oligoethylene glycol moieties to immobilize antibodies and to suppress nonspecific adsorption of proteins, respectively. The results demonstrate that the waveguide-mode sensor powered by the biosensing interface fabricated with those triethoxysilane derivatives and antibody has the potential to detect several tens ng/mL of biomarkers in human serum with unlabeled detection method.

Early functional recovery after two-stage surgery with an allogenic bone graft for baseplate loosening in reverse shoulder arthroplasty: a case report.

OBJECTIVES: Reverse shoulder arthroplasty (RSA) for cuff tear arthropathy results in good shoulder function. However, RSA is associated with several complications, including infection, dislocation of the shoulder joint, implant loosening, and axillary nerve palsy. Several problems may also occur on the glenoid side, including bone defects of the glenoid, baseplate loosening, and displacement of the sphere. Herein, we report a 79-year-old man who obtained early functional recovery following a two-stage operation with an allogenic bone graft to treat baseplate loosening and a glenoid bone defect after RSA. CASE REPORT: The patient presented with pain during motion and limited active shoulder joint movement 5 weeks after undergoing RSA for cuff tear arthropathy. CT revealed baseplate loosening and a glenoid bone defect; these complications were treated via a two-stage operation. The first stage comprised the removal of all implants and the grafting of allogenic bone from the femoral head into the glenoid defect. Six months later, CT confirmed complete union of the grafted bone and glenoid. The second stage comprised the re-insertion of all implants. Two months after the last operation, the active shoulder range of motion of the affected side was almost identical to that of the contralateral side. CONCLUSION: Good early functional recovery was obtained using a two-stage operation for baseplate loosening after RSA. Allogenic bone grafting was effective in the reconstruction of the glenoid defect.

Supporting effects of a N-doped carbon film electrode on an electrodeposited Ni@Ni(OH)2 core-shell nanocatalyst in accelerating electrocatalytic oxidation of oligosaccharides.

The supporting effect of a N-doped carbon film induced superior crystallinity in electrodeposited Ni@Ni(OH)2 core-shell nanoparticles. This improvement resulted in a much higher regeneration rate of catalytic sites (NiOOH), leading to higher oxidation currents of sugars. Also, the overpotential of the maltopentaose (G5) oxidation reaction decreased significantly, probably due to the effect of the electrostatic interaction between NPs and G5.

Hybrid Carbon Film Electrodes for Electroanalysis.

Carbon materials have been widely used for electrochemical analysis and include carbon nanotubes, graphene, and boron-doped diamond electrodes in addition to conventional carbon electrodes, such as those made of glassy carbon and graphite. Of the carbon-based electrodes, carbon film has advantages because it can be fabricated reproducibly and micro- or nanofabricated into electrodes with a wide range of shapes and sizes. Here, we report two categories of hybrid-type carbon film electrodes for mainly electroanalytical applications. The first category consists of carbon films doped or surface terminated with other atoms such as nitrogen, oxygen and fluorine, which can control surface hydrophilicity and lipophilicity or electrocatalytic performance, and are used to detect various electroactive biochemicals. The second category comprises metal nanoparticles embedded in carbon film electrodes fabricated by co-sputtering, which exhibits high electrocatalytic activity for environmental and biological samples including toxic heavy metal ions and clinical sugar markers, which are difficult to detect at pure carbon-based electrodes.

Risk Factors Affecting Cage Retropulsion into the Spinal Canal Following Posterior Lumbar Interbody Fusion: Association with Diffuse Idiopathic Skeletal Hyperostosis.

STUDY DESIGN: This was a retrospective observational study. PURPOSE: We identify risk factors, including physical and surgical factors, and comorbidities affecting cage retropulsion following posterior lumbar interbody fusion (PLIF). OVERVIEW OF LITERATURE: Diffuse idiopathic skeletal hyperostosis (DISH) is considered a risk factor for reoperation after PLIF. We evaluated the effect of DISH on cage retropulsion into the spinal canal, which may require surgical revision for severe neurological disorders. METHODS: A total of 400 patients (175 men, 225 women) who underwent PLIF were observed for >1 year. Factors investigated included the frequency of cage retropulsion and surgical revision. In addition, physical (age, sex, disease), surgical (fusion and PLIF levels, cage number, grade 2 osteotomy), and comorbid (DISH, existing vertebral fracture) factors were compared between patients with and without cage retropulsion. Factors related to surgical revision during the observation period were also considered. RESULTS: Cage retropulsion occurred in 15 patients and surgical revision was performed in 11. Revisions included the replacement of pedicle screws (PSs) with larger screws in all patients and supplementary implants in 10. Among the patients with cage retropulsion, the average PLIF level was 2.7, with DISH present in nine patients and existing vertebral fractures in six. Factors affecting cage retropulsion were diagnoses of osteoporotic vertebral fracture, multilevel fusion, single-cage insertion, grade 2 osteotomy, presence of DISH, and existing vertebral fracture. Multivariable analysis indicated that retropulsion of a fusion cage occurred significantly more frequently in patients with DISH and multilevel PLIF. CONCLUSIONS: DISH and multilevel PLIF were significant risk factors affecting cage retropulsion. Revision surgery for cage retropulsion revealed PS loosening, suggesting that implant replacement was necessary to prevent repeat cage retropulsion after revision.

Stand-Alone Semi-Solid-State Electrochemical Systems Based on Bicontinuous Microemulsion Gel Films.

Bicontinuous microemulsion (BME)-based hydrogel films were integrated with screen-printed electrodes (SPEs) comprising working, counter, and reference electrodes to form stand-alone, semi-solid-state electrochemical systems that do not require an outer electrolyte solution. The gel network of the BME hydrogel only exists in the microaqueous phase and retains the structure of the entire BME gel. Following gelation, a microaqueous phase with sufficient ionic strength ensured effective ionic conductivity, even in thin gel films. This enabled the electrochemical reaction to proceed using a thin gel film as an electrolyte solution. However, an intact micro-oil phase with no gel network enabled efficient extraction from an external oil solution and exhibited rapid electrochemistry that was comparable to that of a BME solution. Cyclic voltammograms of lipophilic redox species in oil using the gel-integrated SPE system demonstrated successfully in the oil itself and in the air with dropped oil onto the system.

Study of the More Suitable Drugs and Dosage Forms for Administration to Newborn Infants via Feeding Tube Using the Collection Rate as an Indicator.

The dosages of drugs in newborn infants are small. Small dose necessitate consideration of the loss of drug when administered via feeding tube. In this study, we conducted a tube administration test for seven kinds of antiepileptic drugs and two kinds of potassium supplements using a neonatal feeding tube and investigated the drug loss using the collection rate. We also studied the differences in collection rates among different dosage forms and drugs to determine the more suitable dosage forms and drugs. We investigated three dosage forms: powder, fine granules or dry syrup (powdery form) drugs, powdery form drugs that have been pulverized (pulverized powdery forms), and pulverized tablets. Additionally, we investigated two potassium supplements to determine which was more suitable: potassium L-aspartate and potassium gluconate. For topiramate, only the powdery form caused tube obstructions; the collection rates of the pulverized powdery form and pulverized tablets were > 90%. All antiepileptic drugs other than topiramate that were tested had collection rates of about > 90%. Considering stability and pharmacokinetics, the more suitable dosage form for topiramate is pulverized tablets, whereas the more suitable dosage form for other antiepileptic drugs is powdery form. Collection rate of potassium gluconate was higher than that of potassium L-aspartate. The current study, which indicates that potassium gluconate powdery form is the more suitable drug, presents the more suitable dosage form and drug for administration via feeding tube to newborn infants. These results show that it is essential to evaluate passage through the tube using the collection rate.

Activities of Daily Living after Surgical Treatment for Osteoporotic Vertebral Fracture with or without Diffuse Idiopathic Skeletal Hyperostosis: A Retrospective Single-Institutional Study.

STUDY DESIGN: This investigation was a retrospective observational study. PURPOSE: The aim of this study was to evaluate whether having diffuse idiopathic skeletal hyperostosis (DISH) as a comorbidity affects the patient's ability to perform activities of daily living (ADL) after surgical treatment for osteoporotic vertebral fracture (OVF). OVERVIEW OF LITERATURE: A few studies have extensively evaluated elderly patients with comorbidities such as DISH and OVFinduced persistent back pain and their ability to perform ADL postoperatively. METHODS: In this study, 63 patients (21 men and 42 women) who underwent surgical treatment for OVF were enrolled. Of these patients, 26 had DISH (D+) and 37 did not have DISH (D-). Patient demographic characteristics and surgical, clinical, and radiological findings were compared between those with and without DISH. The change in their ability to perform ADL after surgery was also evaluated. RESULTS: Age, number of comorbidities, and 1-year mortality rate were significantly higher in the D+ group (p<0.05). Postoperative Visual Analog Scale (VAS) scores were significantly higher in patients with impaired (n=6, p=0.04) abilities to perform ADL, and improvements in VAS scores were significantly higher in patients with unchanged abilities to perform ADL (n=54, p=0.03) after surgery. The average postoperative VAS scores were 2.2 for the D+ group and 2.3 for the D- group, which were not significantly different. CONCLUSIONS: The frequency of OVF with DISH was higher in elderly men with multiple comorbidities and contributed to a higher 1-year mortality rate than those in patients without DISH. However, preoperative and postoperative VAS scores and improvements in VAS scores were similar between those with and without DISH. Postoperative impaired ability to perform ADL was associated with old age, high postoperative VAS scores, and little improvements in VAS scores, which were limitedly influenced by DISH. Surgical treatment of OVF combined with DISH is effective and appropriate for elderly patients.

Surgical Treatment of Osteoporotic Vertebral Fracture Associated with Diffuse Idiopathic Skeletal Hyperostosis along with Comparative Assessment of the Levels of Affected Vertebra or Anterior Column Reconstruction.

INTRODUCTION: Surgical treatment of osteoporotic vertebral fracture (OVF) often involves older patients with various comorbidities; thus, attending physicians must pay special attention to the invasiveness of surgical procedures and possible perioperative complications. In this retrospective observational study, we investigated the relationship between OVF and diffuse idiopathic skeletal hyperostosis (DISH) by examining the clinical characteristics and surgical outcomes. METHODS: Subjects comprised 26 patients (14 men, 12 women) who underwent surgical treatment for OVF complicated by DISH. Vertebral injuries affected the thoracolumbar transitional vertebrae in 18 patients and the middle and lower lumbar vertebrae in eight patients. The clinical characteristics, surgical results, radiological assessments, and outcomes were evaluated on the basis of the levels of affected vertebrae and whether anterior column reconstruction (ACR) was performed. RESULTS: Visual Analog Scale (VAS) measurements improved from an average of 69.7 mm before surgery to 21.3 mm after surgery. 14 patients had neurological deficits, who exhibited improvements by one or more steps on the Frankel scale after surgery. Activities of daily living (ADLs) were maintained during the six-month period following surgery in 23 patients. Comorbidity was observed in 22 patients. 14 patients had perioperative complications, and six required additional surgery. Both operating time and blood loss volume were significantly higher in patients in the middle and lower lumbar vertebrae and ACR groups. Postoperative correction loss was also significantly lower in the ACR group. CONCLUSIONS: Favorable degrees of improvement in neurological deficits and VAS were observed following surgery in patients with OVF complicated by DISH, and postoperative ADLs were maintained in 92% of the patients. Elderly men frequently presented with comorbidities, and the frequencies of patients with perioperative complications and those requiring additional surgery were high.

Microdosing clinical study to clarify pharmacokinetic and pharmacogenetic characteristics of atorvastatin in Japanese hypercholesterolemic patients.

The present study investigated whether the clinical pharmacokinetics of atorvastatin can be predicted from the results of microdosing study in Japanese patients with hypercholesterolemia whose SLCO1B1 and ABCG2 polymorphisms were analyzed. Forty seven statin-naive patients clinically indicated to LDL cholesterol-lowering therapy with atorvastatin were enrolled in a two-period crossover study. Microdose (100 µg) of atorvastatin was orally administered followed by therapeutic dose (10 mg) administration. Transport studies were performed with BCRP-expressing membrane vesicles. The dose-normalized plasma AUC following the therapeutic dose of atorvastatin was positively correlated with that following its microdose, but the AUC increased more than dose proportionally from microdose to therapeutic dose. The patients carrying SLCO1B1 c.521TC showed a significantly higher AUC compared with those carrying c.521TT following the microdose (175%) and therapeutic dose (139%). On the other hand, SLCO1B1 c.388G or ABCG2 c.421A variant alleles did not significantly affect the pharmacokinetics of atorvastatin. Atorvastatin showed ATP-dependent transport in BCRP-expressing membrane vesicles and it inhibited rosuvastatin transport with Ki of 6.3 ± 2.9 µM (mean ± SD). Microdosing study appears to be feasible to roughly estimate the pharmacokinetic and pharmacogenetic profiles of atorvastatin following the oral therapeutic dose in hypercholesterolemic patients.

Electrochemical performance at sputter-deposited nanocarbon film with different surface nitrogen-containing groups.

Carbon materials containing nitrogen have been extensively studied as electrode materials for use in non-platinum cathodes of fuel cells due to their high electrocatalytic activity for oxygen reduction. The activity is strongly dependent on the structure of surface nitrogen-containing functional groups. Carbon film containing nitrogen is also suitable for analytical applications because of its low background noise and its electrocatalytic activity, which is superior to that of pure carbon film. Here, we fabricated sputter-deposited nanocarbon film with a nitrogen-containing group and estimated the efficacy of a surface nitrogen-containing group for detecting biomolecules. Two types of carbon films, one rich in graphite-like nitrogen-containing bonds and the other rich in pyridine-like bonds, were successfully fabricated without changing their nitrogen concentration, sp2/sp3 ratio or surface flatness. The carbon film rich in pyridine-like bonds shows a positive oxygen reduction peak of about 250 mV compared with pure carbon film and is also 200 mV more positive compared with film with graphite-like nitrogen-containing bonds. This indicates that pyridine-like bonds contribute more effectively to electrocatalytic activity than graphite-like nitrogen-containing bonds. For detecting biomolecules, carbon film rich in pyridine-like bonds also exhibits more negative peak potentials for the oxidation of NADH and l-ascorbic acid, suggesting that carbon film rich in pyridine-like bonds will show improved performance for detecting electroactive biomolecules.

Increased electrode activity during geosmin oxidation provided by Pt nanoparticle-embedded nanocarbon film.

The musty odor compound geosmin was electrochemically detected by using Pt nanoparticle (PtNP)-embedded nanocarbon (Pt-C) films formed with unbalanced magnetron (UBM) co-sputtering. The sputtered Pt components formed NPs (typically 1.53-4.75 nm in diameter) spontaneously in the carbon films, owing to the poor intermiscibility of Pt with carbon. The surface concentrations of PtNPs embedded in the nanocarbon film were widely controllable (Pt = 4.8-35.9 at%) by regulating the target powers of the Pt and carbon individually. The obtained film had a flat surface (Ra = 0.17-0.18 nm) despite the fact the PtNPs were partially exposed at the surface. Compared with a Pt film electrode, some Pt-C films exhibited higher electrode activity against geosmin although the surface Pt concentrations of these Pt-C films were much lower than that of the Pt film electrode, thanks to the wider potential window and lower background current that resulted from the ultraflat and stable carbon-based film prepared by UBM co-sputtering. Computational experiments revealed that the theoretical oxidation potential (Eox) value for geosmin was relatively similar to that obtained in electrochemical experiments using our Pt-C film electrode. Moreover, we also theoretically estimated the possible oxidation site of geosmin molecules and the advantage of the NP shape of the electroactive Pt parts as regards the electrochemical oxidation of geosmin. We successfully used the Pt-C film (10.6 at%) electrode to detect geosmin in combination with HPLC at a low detection limit of 100 ng L-1.