Sterilization Procedures for Titanium Alloy Surfaces Leads to Higher Expression of Biofilm-Related Staphylococcus aureus Genes.

Background: Around 1-2% of all implantation surgeries lead to implant-related infections, incurring costs of $40,000-$160,000 per total hip PJI. The 5-year mortality rate of prosthetic joint infections is up to 21%. To prevent infections during surgery, sterile surgery rooms and procedures have been developed and certified standards have been established. To guarantee the sterility, implants can be acquired already sterile from manufacturers. Some titanium implants can be delivered unsterilized with a manual for sterilization procedure in compliance with ISO 17664. The aim of this study is to evaluate if the most used sterilization methods (steam sterilization in an autoclave and UV light sterilization) of titanium alloys, can influence the biofilm forming capacity of Staphylococcus aureus. In this study, we examined the influence of sterilization methods on the gene expression of biofilm-associated genes and regulators. Methods: We compared gene expression of icaADBC, SarA, SigB, and SodA on titanium CP4 and Ti6Al4V alloys sterilized by UV-light and pressurized saturated steam sterilization. We performed RT-qPCR after RNA extraction of Staphylococcus aureus ATCC 29213. In addition, bacterial cell growth on the sterilized titanium surfaces was examined by colony forming unit counting on agar plates after 24 h of incubation. Results: Colony forming units of S. aureus on titanium CP4 samples showed a higher tendency in colony counts when sterilized with UV light than with pressurized saturated steam (autoclaved). Similarly, colony forming unit counts on Ti6Al4V samples showed tendencies of higher numbers on UV light sterilized samples than on autoclaved samples. Gene expression of icaADBC, SarA and SodA between steamed samples and UV light sterilized samples showed no difference on titanium CP4 samples, whereas SigB showed higher gene expression on titanium CP4 samples when sterilized with UV light than in an autoclave. On autoclaved Ti6Al4V samples, all examined genes showed 4 to 9 times higher fold changes in gene expression than on UV light sterilized samples. Conclusions: This study indicates that steam sterilization of Ti6Al4V can increase biofilm formation of S. aureus on its surface. The significantly increased gene expression of biofilm responsible genes may indicate a modification of titanium surfaces on alloy components. This may promote biofilm formation that can lead to implant-infections in vivo.

Acetabular defect management and revision arthroplasty via the direct anterior approach.

OBJECTIVE: Acetabular revision arthroplasty and osseous defect management through the direct anterior approach (DAA) with or without proximal extension. INDICATIONS: Aseptic or septic component loosening, periacetabular osseous defects, pelvic discontinuity, intrapelvic cup protrusion, anterior pseudotumors, iliopsoas tendonitis, polyethylene wear or iliopsoas abscess. CONTRAINDICATIONS: Clinically relevant gluteal tendon lesions, active infection, morbid obesity, large abdominal pannus, ASA (American Society of Anesthesiologists) score > III, inguinal skin infection. SURGICAL TECHNIQUE: Electrocautery dissection is recommended to dissect the Hueter interval and to debulk pericapsular scar tissue. At all times during capsular debulking, it should be made sure not to damage the iliopsoas tendon or the neurovascular bundle. A stepwise releasing sequence can facilitate dislocation of the prosthesis. Most cases can be revised via the standard DAA but certain circumstances require an intra- or extrapelvic extension. Access to the anterior gluteal surface of the ilium can be provided using a "tensor snip". More posterior access is provided by the extensile extrapelvic approach described by Smith-Petersen. The intrapelvic Levine extension offers access to the entire visceral surface of the ilium and large parts of the anterior column. POSTOPERATIVE MANAGEMENT: Patient revised via the intra- or extrapelvic extension and patients suffering from extensive soft tissue or osseous defects should undergo postoperative weight-bearing restrictions with 20 kg for 6 weeks. RESULTS: Based on our studies, there is no limitation on the type of acetabular implant that can be used in DAA revision arthroplasty. Moreover, virtually all types of periacetabular osseous defects can be managed through the approach and its extensions. Acetabular revision arthroplasty via the DAA and its extensions is safe and can result in good midterm results.

Femoral revision with the direct anterior approach.

OBJECTIVE: The advantages of the direct anterior approach (DAA) in primary total hip arthroplasty as a minimally invasive, muscle-sparing, internervous approach are reported by many authors. Therefore, the DAA has become increasingly popular for primary total hip arthroplasty (THA) in recent years, and the number of surgeons using the DAA is steadily increasing. Thus, the question arises whether femoral revisions are possible through the same interval. INDICATIONS: Aseptic, septic femoral implant loosening, malalignment, periprosthetic joint infection or periprosthetic femoral fracture. CONTRAINDICATIONS: A draining sinus from another approach. SURGICAL TECHNIQUE: The incision for the primary DAA can be extended distally and proximally. If necessary, two releases can be performed to allow better exposure of the proximal femur. The DAA interval can be extended to the level of the anterior superior iliac spine (ASIS) in order to perform a tensor release. If needed, a release of the external rotators can be performed in addition. If a component cannot be explanted endofemorally, and a Wagner transfemoral osteotomy or an extended trochanteric osteotomy has to be performed, the skin incision needs to be extended distally to maintain access to the femoral diaphysis. POSTOPERATIVE MANAGEMENT: Depending on the indication for the femoral revision, ranging from partial weight bearing in cases of periprosthetic fractures to full weight bearing in cases of aseptic loosening. RESULTS: In all, 50 femoral revisions with a mean age of 65.7 years and a mean follow-up of 2.1 years were investigated. The femoral revision was endofemoral in 41 cases, while a transfemoral approach with a lazy­S extension was performed in 9 patients. The overall complication rate was 12% (6 complications); 3 patients or 6% of the included patients required reoperations. None of the implanted stems showed a varus or valgus position. There were no cases of mechanical loosening, stem fracture or subsidence. Median WOMAC (Western Ontario and McMaster Universities Osteoarthritis Index) score before surgery improved significantly from preoperative (52.5) to postoperative (27.2).

Aerosol morphology and particle size distribution in orthopaedic bone machining: a laboratory worst-case contamination simulation. Is high-speed bone machining potentially harmful by pollution and quality schemes and what measures could be taken for prevention?

AIM OF THE STUDY: High-speed bone machining devices with irrigation fluid were used in surgery to spread aerosols and toss tissue particles of varying morphology into the operating room. Based on measurements taken on a phantom object, the shape, size, and spatial contamination distribution of such particles were assessed. METHOD: Cadaveric femoral heads were continuously machined with a spherical bur, manually held at a fixed attack angle. The irrigation fluid used during bone machining was enriched with bacteria to act as a tracer to quantify the spatial contamination. A vertical board equipped with snippets served as a phantom object to assess contamination load and morphology of airborne particles. RESULTS: Eight-nine percent of the particles had a non-circular cross section. The detected particle size ranged across six orders of magnitude, from 0.006 to 4 mm2 with a median particle size of 0.125 mm2. The CFU counts observed after the standard machining time ranged from 7 to 240, with a median of 2 CFUs. The highest median contamination was seen at the upper right corner of the phantom. DISCUSSION: The experiments show that contaminating particles of a wide variety of shapes and sizes are part of the aerosol created by high-speed burring. While protection of personnel and equipment is always important, surgical helmets should be worn, especially at contamination hotspots, and gloves should be replaced at the end of machining. Sensitive instruments and measuring devices-such as optical sensors-should also be protected effectively, as the optical measurement may be obstructed by aerosol particles.

An intraoperative assessment of bacterial contamination on surgical helmets and gloves during arthroplasty surgeries.

INTRODUCTION: Infection is a devasting complication after primary and revision arthroplasty. Therefore, identifying potential sources of infection can help to reduce infection rates. The aim of this study was to identify the impact and potential risk of contamination for glows and surgical helmets during arthroplasty procedures. METHODS: Surveillance cultures were used to detect contamination of the glow interface during the surgery and the surgical helmets immediately at the end of the surgery. The cultures were taken from 49 arthroplasty procedures from the surgeon as well as the assisting surgeon. RESULTS: In total, 196 cultures were taken. 31 (15.8%) of them showed a contamination. 12 (13.5%) of 98 cultures taken from the surgical helmets were positive, while 18 (18.3%) of 96 cultures taken from the gloves showed a contamination. DISCUSSION: The study showed that during arthroplasty procedures, surgical helmets and gloves were frequently contaminated with bacteria. In 20 of 49 (40.8%) arthroplasty surgeries, either the surgical helmet or the gloves showed a contamination. Surgeons should be aware that they might be a source for infection during arthroplasty surgeries.

The effect of gastrocnemius resection on knee flexion in a total knee arthroplasty model.

INTRODUCTION: Flexion contracture in knee arthritis and total knee arthroplasty (TKA) is a common and significant problem. An improvement in knee extension in patients with TKA and mild flexion contractures has been observed clinically when a gastrocnemius recession was performed for other concomitant conditions. The goal of this study was to quantify the effect of gastrocnemius recession on knee flexion in TKA cadaver model. MATERIALS AND METHODS: Range of motion (ROM) of 23 cadaveric knees was determined with a navigation system before and after performing TKA using a medial parapetallar approach and after performing a gastrocnemius recession. Varus-valgus, flexion-extension, and internal-external rotation angles of the knee joint were recorded with leg in full extension and in 90°of knee flexion. Extension and flexion gaps were measured using a gap tensioning device. Dorsiflexion of the foot was measured with a goniometer when a torque moment of 10 Nm was applied to the ankle joint. RESULTS: A statistically significant improvement of 5° in knee extension was observed following gastrocnemius recession (P = 0.015). Varus and valgus angles, internal, and external rotation were unaffected by gastrocnemius recession. Ankle dorsiflexion increased by 9° following gastrocnemius recession (P ≤ 0.001). CONCLUSIONS: Performing a gastrocnemius recession improves the knee extension in TKA knees with flexion contractures. Gastrocnemius recession may be a useful technique to improve terminal extension in TKA.

Subsidence of a metaphyseal-anchored press-fit stem after 4-year follow-up: an EBRA-FCA analysis.

PURPOSE: Uncemented stem migration analysis by EBRA-FCA (Einzel-Bild-Roentgen Analyse, Femoral Component Analyse) has been seen to be a good predictive indicator for early implant failure. In this study, we investigated the migration behavior of a cementless metaphyseal-anchored press-fit stem after 4-year follow-up. METHODS: Applying a retrospective study design, we reviewed all consecutive patients who between 2012 and 2017 received a cementless Accolade II press-fit stem at our Department. We reviewed medical histories and performed radiological measurements using EBRA-FCA software. EBRA-FCA measurements and statistical investigations were performed by two independent investigators. RESULTS: A total of 102 stems in 91 patients (female 60; male 31) fulfilled our inclusion criteria. Mean age at surgery was 66.2 (range 24.3-92.6) years. EBRA migration analysis showed a mean subsidence of 1.4 mm (range 0.0-12.0) at final follow-up. The angle between stem and femur axis was 0.5° (range 0.0°-2.8°) after 48 months. No correlations between gender or Dorr types and subsidence were found (p > 0.05). A body mass index > 30 kg/m2 showed a significant increase in stem subsidence within the first 6 (p = 0.0258) and 12 months (p = 0.0466) postoperative. CONCLUSIONS: Migration pattern of the metaphyseal-anchored stem and a low subsidence rate at final follow-up may predict a good long-term clinical result. TRIAL REGISTRATION: Number: 20181024-1875.

A Prospective Assessment of Knee Arthroscopy Skills Between Medical Students and Residents-Simulator Exercises for Partial Meniscectomy and Analysis of Learning Curves.

BACKGROUND: The Covid-19 pandemic has created the largest disruption of education in history. In a response to this, we aimed to evaluate the knee arthroscopy learning curve among medical students and orthopaedic residents. METHODS: An arthroscopy simulator was used to compare the learning curves of two groups. Medical students with any prior knowledge of arthroscopy (n=24) were compared to a residents group (n=16). Analyzed parameters were "time to complete a task," assessment of the movement of tools and values scoring damage to the surrounding tissues. RESULTS: After several repetitions, both groups improved their skills in terms of time and movement. Residents were on average faster, had less camera movement, and touched the cartilage tissue less often than did students. Students showed a steeper improvement curve than residents for certain parameters, as they started from a different experience level. CONCLUSION: The participants were able to reduce the time to complete a task. There was also a decrease in possible damage to the virtual surrounding tissues. In general, the residents had better mean values, but the students had the steeper learning curve. Particularly less experienced surgeons can especially train their hand-eye coordination skills required for arthroscopy surgery. Training simulators are an important training tool that supplements cadaveric training and participation in arthroscopic operations and should be included in training.

Hemiarthroplasty of the hip using the direct anterior approach.

OBJECTIVE: Minimally invasive approach in total hip arthroplasty for the treatment of femoral neck fractures with a hemiarthroplasty. INDICATIONS: Femoral neck fractures of patients without hip osteoarthritis where the acetabulum is still intact. CONTRAINDICATIONS: Lesions and infections of the skin in the approach area; hip osteoarthritis; surgeon's lack of experience with the technique. SURGICAL TECHNIQUE: The direct anterior approach (DAA) uses the Smith-Peterson interval between the tensor fasciae latae (TFL) and the rectus and sartorius muscle. After coagulation of the ascending branches of the femoral circumflex vessels, the capsule is opened. The remaining parts of the femoral neck are removed and osteotomized if necessary. The femoral head is removed with a cork screw. Then the shaft is supported by 2 sharp retractors at the greater trochanter from cranial, and the leg is externally rotated, hyperextended, and adducted. A TFL release can be performed which we also recommend. The femoral canal is opened step by step and extended with rasps which are introduced with the double curved broach handle. Cement and the final implant are introduced and after the trial reduction also the final head. The hip is reduced, the capsule adapted and the wound closed. POSTOPERATIVE MANAGEMENT: For this approach, there are no approach specific recommendations. Postoperative treatment depends on whether the approach was extended with muscle releases and on the type of reconstruction performed. If the approach was limited to the minimally invasive direct anterior portal, quicker rehabilitation can be expected due to the reduced muscle damage. We prefer mobilization with full weight bearing as tolerated on the next day.

Influence of Nutrient Media Compared to Human Synovial Fluid on the Antibiotic Susceptibility and Biofilm Gene Expression of Coagulase-Negative Staphylococci In Vitro.

Bacterial antibiotic resistance and biofilm formation are mechanisms usually involved in the pathogeny of implant-related infections. Worldwide, antibiotic susceptibility tests are usually carried out using nutrient-rich media. Clinical routine laboratories and even research centers use for example EUCAST or CLSI for guidelines. In this study, we investigated the effect of different nutrient media on the antibiotic susceptibility and icaADBC gene expression of bacteria in biofilm. As media, Müller-Hinton Bouillon (MHB), Tryptic Soy Broth (TSB) and human synovial fluid (SF) diluted 1:4 in phosphate buffered saline (PBS), each also supplemented with 1% glucose, were used. The influence of different nutrient media on the antibiotic susceptibility of coagulase-negative staphylococci (CoNS) was evaluated by counting of colony-forming units (CFU) and by checking the metabolic activity of the bacteria. We used reverse transcriptase and real-time qPCR to investigate the influence of nutrient media on the biofilm gene expression. We used two-way analysis of variance (ANOVA). p < 0.05 was considered to be statistically significant. Significant differences in growth and antibiotic susceptibility were detected in all strains tested among the different media used. The nutrient media showed influence on the cell viability of all bacteria after antibiotic treatment. IcaADBC gene expression was significantly influenced by glucose and all nutrient media. The results highlight the influence of glucose on the antibiotic susceptibility, growth and gene expression of all strains tested. For all strains, a significant difference in bacterial recovery, viability and gene expression were found when compared to biofilm grown in SF.

Mechanical and Morphological Assessment of an Innovative Textile for Patient Positioning Applications: Comparison to Two Standard Bandage Systems.

In the healthcare environment, bandage systems are versatile medical devices to position and fix patients' torsos or extremities. In this study, the mechanical and morphological properties of an innovative patient position system, iFix, were assessed and compared to two commercially available bandages. Morphological properties were investigated using a scanning electron microscope (SEM). The iFix bandage showed anisotropic mechanical properties, with a more rigid behavior in the longitudinal direction and a more elastic behavior in the transverse direction. This behavior results from the organization of the fibers visible in the SEM images. All three materials investigated in this study were able to support similar maximum loads. In cases where a rigid fixation of patient limbs or torso is necessary, the authors recommend the usage of iFix. In vivo studies should be carried out to prove safety in a surgical environment before its clinical usage.

Antibacterial and Anti-Biofilm Activity of Omega-3 Polyunsaturated Fatty Acids against Periprosthetic Joint Infections-Isolated Multi-Drug Resistant Strains.

Background: Implantable medical devices, such as prosthetics, catheters, and several other devices, have revolutionized medicine, but they increase the infection risk. In previous decades, commercially available antibiotics lost their activity against coagulase-negative Staphylococci (CoNS) and several other microorganisms. Docosahexaenoic acid (DHA) and eicosapentaenoic acid (EPA) are the two major omega-3 polyunsaturated fatty acids (ω-3 PUFAs) with antimicrobial properties. Materials and Methods: In this study, we tested the EPA and the DHA for its antibacterial and anti-biofilm activity in vitro against Staphylococcus epidermidis, Staphylococcus aureus, and different CoNS as reference strains and isolated from patients undergoing orthopedic treatment for implant infections. The tests were carried out with the strains in planktonic and biofilm form. Cytotoxicity assay was carried out with EPA and DHA using human gingival fibroblasts HGF-1. Results: The highest concentration of EPA and DHA promoted the complete killing of S. epidermidis 1457 and S. aureus ATCC 25923 in planktonic form. The fatty acids showed low activity against P. aeruginosa. EPA and DHA completely killed or significantly reduced the count of planktonic bacteria of the patient isolated strains. When incubated with media enriched with EPA and DHA, the biofilm formation was significantly reduced on S. epidermidis 1457 and not present on S. aureus ATCC 25923. The reduction or complete killing were also observed with the clinical isolates. The pre-formed biofilms showed reduction of the cell counting after treatment with EPA and DHA. Conclusion: In this study, the ω-3 PUFAs EPA and DHA showed antimicrobial and anti-biofilm activity in vitro against S. aureus, S. epidermidis, and P. aeruginosa, as well as against multi-drug resistant S. aureus and CoNS strains isolated from patients undergoing periprosthetic joint infections (PJI) treatment. Higher concentrations of the fatty acids showed killing activity on planktonic cells and inhibitory activity of biofilm formation. Although both substances showed antimicrobial activity, EPA showed better results in comparison with DHA. In addition, when applied on human gingival fibroblasts in vitro, EPA and DHA showed a possible protective effect on cells cultured in medium enriched with ethanol. Further studies are required to confirm the antimicrobial activity of EPA and DHA against multi-drug resistant strains and pan-drug resistant strains.

The spatial distribution of aerosols in high-speed bone burring with external irrigation.

It is well-known that the use of high-speed burring devices with irrigation used in bone surgery produces aerosols, and can toss tissue particles into space. The aim of this study was to assess the spatial vertical contamination in the sterile operation field while using a high-speed cutting device at various locations. A fresh porcine knee was resected for 10 min with a high-speed burring device. To determine the spatial contamination distribution bacteria were used as a tracer. In this novel method for detecting environmental contamination droplets of the contaminated irrigation solution were collected on vertically mounted Petri dishes and the number of colony-forming units was counted. Contamination of varying intensity was observed throughout the room. The highest contamination was found perpendicular to the bur rotation axis in a distance 0.5 m from the bur, at a height of 1.4 m. Around this spot, colony-forming units count isotropically drops to less than 100 CFUs at an area of 0.5 m in diameter. The contamination decreases with increasing distance to the bur head and a main direction of contamination was identified. Placing critical sterile objects in the highly contaminated space during and after bone resection procedures should be avoided whenever possible.

Variation of BMP2 Concentration and Its Activity in Bone Grafts Obtained from Patients Undergoing Hip Replacement Surgery.

AIM: Bone morphogenetic protein 2 (BMP2) is a member of a subgroup of the transforming growth factor beta superfamily and triggers various signaling events which in turn stimulate chondrogenesis, osteogenesis, angiogenesis and extracellular matrix remodeling leading to fracture healing. In this study, we quantified the concentration of BMP2 in fresh human bone grafts obtained from 40 patients undergoing hip replacement surgery. Besides the concentration, the activity of the detected BMP2 was also investigated. MATERIALS AND METHODS: In this study, the concentration of BMP2 in fresh human bone grafts obtained from 40 patients undergoing hip replacement surgery was quantified. Human BMP2 enzyme-linked immunosorbent assays and bicinchoninic acid quantification was used to determine the total concentration of protein present in each sample. To determine the activity of the BMP2 found in each bone sample, alkaline phosphatase activity was measured by colorimetric assay. RESULTS: The amount of BMP2 seemed to vary slightly between the patients. Taking into consideration the patient's gender, we observed that male patients presented slightly more BMP2 in comparison with females. When analyzing the activity of BMP2, we observed that in female patients, the activity was slightly higher in comparison to males. This variation may be caused by a number of factors, including but not limited to gender, age, osteoporosis and previous diseases. This information shows that the osteogenic potential of different bone graft samples is not consistent. CONCLUSION: The activity of BMP2 in femur heads obtained from patients undergoing total hip replacement surgery showed significant variation according to gender and age. The measurement of bone proteins activity might be promising as a qualitative method in bone banks and should be further investigated.

Femoral Revision Total Hip Arthroplasty Performed through the Interval of the Direct Anterior Approach.

BACKGROUND: we report the clinical outcomes for femoral revision total hip replacement (THR) using the Direct Anterior Approach (DAA) interval. METHODS: 149 patients (165 hips) with a mean age of 68.9 years (range, 33.2-91.0 years) and a mean follow-up of 4.2 years (1.1-8.9 years) were included. The indication for revision surgery was aseptic stem loosening in 131 (79.4%) hips, periprosthetic fracture in 29 (17.6%) hips, revision for stem malalignment in one (0.6%) hip, and prosthetic failure in four (2.4%) hips. RESULTS: an endofemoral approach was used for 156 hips, and a Wagner transfemoral osteotomy was used for nine hips. An additional cup revision was done in 52 hips (uncemented cup: n = 29; cemented cup: n = 21; acetabular cage: n = 2). The overall complication rate was 14.5% (24 complications). Ten patients (10 hips) were revised (8 cups, 2 liners, 2 stems) with an average time to revision of 6 months (range, 3-23 months). The median preoperative Western Ontario McMasters Osteoarthritis Score (WOMAC) score was 52.5 (Inter Quartile Range (IQR): 33.3), which improved to 27.2 (IQR: 30) postoperatively (p < 0.01). CONCLUSION: use of the DAA achieved similar results when compared with other surgical approaches in terms of clinical outcomes and complications, including dislocation rate. These results suggest that femoral revision using the DAA interval can be a safe and reliable procedure.

Outcome and EBRA migration analysis of a reconstruction cage in acetabular revision arthroplasty: a clinical and radiological study.

PURPOSE: Restoration cages and bone allografts have been proposed to manage severe acetabular bone defects. We aimed to investigate the migration behaviour of a restoration cup and impacted allograft bone in severe acetabular defects with Einzel-Bild-Röntgen-Analyse (EBRA). METHODS: Applying a retrospective study design, 64 cases treated between 2009 and 2016 were reviewed. We determined the preoperative Charlson Comorbidity Index (CCI), pre- to postoperative WOMAC score, blood loss and functional outcome. From preoperative x rays, the acetabular deficiencies were classified according to Paprosky. Cup migration analyses were performed with EBRA. RESULTS: Mean age at surgery was 73 (range: 38-93) years. According to the classification by Paprosky et al., 50% (n = 32) of our patients showed a type III B and 28.1% (n = 18) a type III A defect. Radiological follow-up for migration analysis was 35 (range: 4-95) months. Migration analysis showed a mean cup migration of 0.7 mm (range: 5.7-9.6) medial and 1.8 mm (range: 1.7-12.6) cranial. CONCLUSION: In conclusion, acetabular restoration cages in combination with bone impaction grafting showed a low revision rate at a mean follow-up of 35 months. Mean cup migration revealed low rates after 2 years and suggested a stable postoperative implant position.

Increased Staphylococcus aureus Biofilm Formation on Biodegradable Poly(3-Hydroxybutyrate)-Implants Compared with Conventional Orthopedic Implants: An In Vitro Analysis.

OBJECTIVE: To compare the biofilm formation on a biodegradable material, poly(3-hydroxybutyrate) (PHB), with that on conventional titanium (Ti) and steel (St) implant material. METHODS: Pins made of the different materials were incubated in Müller-Hinton broth inoculated with 2 × 10 colony-forming units (CFU)·mL of Staphylococcus aureus for 2 and 7 days and then sonicated for the disruption of the biofilms. CFU were counted to quantify the number of bacteria in the biofilm, and the cell proliferation assay 2,3-Bis-(2-methoxy-4-nitro-5-sulfophenyl)-2H- tetrazolium-5-carboxanilid salt was used to evaluate their metabolic activity. Scanning electron microscopy visualized the structure of the biofilm. RESULTS: We found a significantly higher metabolic activity and CFU count in the biofilm of PHB pins compared with St and Ti pins (analysis of variance, P < 0.0001). Scanning electron microscopy revealed structured biofilms on PHB pins already after 2 days of incubation, which was not observed on the other tested implants. CONCLUSION: PHB implants seem to provide an environment that advantages the formation of biofilms of S. aureus, a common pathogen in implant-related infections. The amount of biofilm is higher on PHB implant compared with conventionally used orthopedic titanium and steel implants. To overcome the potential risk of surgical site infections linked to the clinical use of PHB implants, possible modifications of the material, increasing its antibacterial properties, need to be further investigated.

Mid-term Follow-up of the Direct Anterior Approach in Acetabular Revision Hip Arthroplasty Using a Reconstruction Cage With Impaction Grafting.

BACKGROUND: Severe acetabular bone loss is often treated with reconstruction cages and impaction grafting using allograft bone. Accurate implant positioning is crucial for successful clinical and radiological outcomes. The direct anterior approach (DAA) is a standard approach for primary total hip arthroplasty (THA) that is being used more frequently for revision THA. The aim of this study was to report midterm clinical and radiological outcomes of acetabular revision arthroplasty using the DAA to address large acetabular defects by using a reconstruction cage and impaction grafting. METHODS: Acetabular cup revisions were performed in 64 patients (64 hips) with severe acetabular bone loss. All patients received reconstruction cages with impaction grafting via the DAA. The stem was also revised in 22 patients. Complications, radiological, and functional outcomes were assessed. RESULTS: Six of the 64 patients were revised at a mean follow-up of 27.6 months (range, 11-84 months), two each for implant failure, infection, and recurrent dislocation. One hip showed the radiological failure of the implant, but the patient was asymptomatic and was not revised. The median Western Ontario McMasters Osteoarthritis Score (WOMAC) for the cohort overall improved significantly (P < .01) by the latest follow-up compared with preoperative scores. CONCLUSION: Good midterm outcomes can be obtained with the DAA for acetabular cup revisions done to address severe acetabular bone loss by using reconstruction cages and impaction grafting. The number of complications was within the expected range for this type of revision procedure at midterm follow-up, and dislocation rates were low.

The direct anterior approach: treating periprosthetic joint infection of the hip using two-stage revision arthroplasty.

BACKGROUND: Either one- or two-stage revision arthroplasties can be used for the treatment of chronic periprosthetic joint infection (PJI) after total hip arthroplasty (THA). We report our results following two-stage revision surgery performed through the direct anterior approach (DAA) interval using a custom-made articulating spacer. METHODS: Between 2009 and 2014, 49 patients (49 consecutive procedures) had surgery through either a DAA or extended DAA approach. Each patient received perioperative intravenous administration of antibiotics. A custom-made spacer was implanted after explanting cup and stem and following extensive debridement. Broad-spectrum antibiotics were administered during the immediate perioperative period and then adjusted according to the infecting organism. Complication rates and eradication rates were observed. WOMAC patient assessments were administered preoperatively and one-year postoperatively. RESULTS: Of the 49 study patients, five had a recurrence of the infection after the second-stage revision, five had a proximal periprosthetic fracture during the first stage procedure and one patient had a transient femoral nerve palsy that resolved fully within the first postoperative year. 30 different microorganisms were identified on intraoperative specimens. The average time between first and second stage procedure was 65.7 days (range 21-132 days). Eradication of infection was defined as healed wound without fistula, no drainage, no recurrence of the infection, no subsequent surgical intervention for persistent or perioperative infection after second stage revision and no long-term (> 6 months) antimicrobial suppression therapy. Eradication rate of infection in our study was 89.8%. Postoperative WOMAC scores improved significantly CONCLUSION: The preliminary clinical results for the custom-made spacer technique implanted through the DAA are promising. Therefore, we believe the DAA can be used safely as a standard operative approach for two-stage revision procedures.

Measuring bone defects for acetabular revision surgery for choosing an appropriate reconstruction strategy: A concept study on plastic models.

BACKGROUND: Bone defects can be filled with autografts, allografts and artificial bone-materials. The aim of this study was to evaluate whether the digitization of known defect models with a navigation system is a reliable measurement method for estimating the size of a bone defect. METHODS: Six preformed, cylindrical and cone-shaped defects on an artificial hip-bone were digitalized by six different observers. Reference volumes were gathered by measuring the depth of the defects, using an alginate impression material to fill out the defects and calculating the volumes from a CT scan. RESULTS: One out of the six preformed defects showed a statistically significant difference between the digitalization and the calculation, four showed a significant difference between the digitalization and the mould as well as between the digitalization and the CT calculation. CONCLUSIONS: This technique offers satisfactory results and consistent reproducibility when digitalizing big defects with relatively simple shape. Decreasing size and increasing complexity of the defects leads to more imprecise measurements.