A multimodal comparison of latent denoising diffusion probabilistic models and generative adversarial networks for medical image synthesis.

Although generative adversarial networks (GANs) can produce large datasets, their limited diversity and fidelity have been recently addressed by denoising diffusion probabilistic models, which have demonstrated superiority in natural image synthesis. In this study, we introduce Medfusion, a conditional latent DDPM designed for medical image generation, and evaluate its performance against GANs, which currently represent the state-of-the-art. Medfusion was trained and compared with StyleGAN-3 using fundoscopy images from the AIROGS dataset, radiographs from the CheXpert dataset, and histopathology images from the CRCDX dataset. Based on previous studies, Progressively Growing GAN (ProGAN) and Conditional GAN (cGAN) were used as additional baselines on the CheXpert and CRCDX datasets, respectively. Medfusion exceeded GANs in terms of diversity (recall), achieving better scores of 0.40 compared to 0.19 in the AIROGS dataset, 0.41 compared to 0.02 (cGAN) and 0.24 (StyleGAN-3) in the CRMDX dataset, and 0.32 compared to 0.17 (ProGAN) and 0.08 (StyleGAN-3) in the CheXpert dataset. Furthermore, Medfusion exhibited equal or higher fidelity (precision) across all three datasets. Our study shows that Medfusion constitutes a promising alternative to GAN-based models for generating high-quality medical images, leading to improved diversity and less artifacts in the generated images.

Finding an effective MRI sequence to visualise the electroporated area in plant-based models by quantitative mapping.

Plant-based models can reduce the number of animal studies for electroporation research in medical cancer treatment modalities like irreversible electroporation. Magnetic resonance imaging (MRI) provides volumetric visualisation of electroporated animal or plant tissues; however, contrast behaviour is complex, depending on tissue and sequence parameters. This study numerically analysed contrast between electroporated and non-electroporated tissue at 1.5 T in various MRI sequences (DWI, T1W, T2W, T2*W, PDW, FLAIR) performed 4 h after electroporation in apples (N = 4) and potatoes (N = 8). Sequence parameters (inversion time [TI], echo time [TE], b-value) for optimal contrast and electroporation-mediated changes in T1 and T2 relaxation times and apparent diffusion coefficient (ADC) were determined for potato (N = 4) using quantitative parameter mapping. FLAIR showed the electroporated zone in potatoes with best contrast, whereas no sequence yielded clear visibility in apples. After electroporation, T1 and T2 in potato decreased by 29% ([1245 ± 54 to 886 ± 119] ms) and 12% ([249 ± 17 to 217 ± 12] ms), respectively. ADC increased by 11% ([1303 ± 25 to 1449 ± 28] × 10-6 mm2/s). Optimal contrast was found for TI = 1000 ms, low TE and high b-value. T1 was most sensitive to EP-mediated tissue changes. Future research could use this methodology and findings to obtain high-contrast MR images of electroporated and non-electroporated biological tissues.

Using Machine Learning to Reduce the Need for Contrast Agents in Breast MRI through Synthetic Images.

Background Reducing the amount of contrast agent needed for contrast-enhanced breast MRI is desirable. Purpose To investigate if generative adversarial networks (GANs) can recover contrast-enhanced breast MRI scans from unenhanced images and virtual low-contrast-enhanced images. Materials and Methods In this retrospective study of breast MRI performed from January 2010 to December 2019, simulated low-contrast images were produced by adding virtual noise to the existing contrast-enhanced images. GANs were then trained to recover the contrast-enhanced images from the simulated low-contrast images (approach A) or from the unenhanced T1- and T2-weighted images (approach B). Two experienced radiologists were tasked with distinguishing between real and synthesized contrast-enhanced images using both approaches. Image appearance and conspicuity of enhancing lesions on the real versus synthesized contrast-enhanced images were independently compared and rated on a five-point Likert scale. P values were calculated by using bootstrapping. Results A total of 9751 breast MRI examinations from 5086 patients (mean age, 56 years ± 10 [SD]) were included. Readers who were blinded to the nature of the images could not distinguish real from synthetic contrast-enhanced images (average accuracy of differentiation: approach A, 52 of 100; approach B, 61 of 100). The test set included images with and without enhancing lesions (29 enhancing masses and 21 nonmass enhancement; 50 total). When readers who were not blinded compared the appearance of the real versus synthetic contrast-enhanced images side by side, approach A image ratings were significantly higher than those of approach B (mean rating, 4.6 ± 0.1 vs 3.0 ± 0.2; P < .001), with the noninferiority margin met by synthetic images from approach A (P < .001) but not B (P > .99). Conclusion Generative adversarial networks may be useful to enable breast MRI with reduced contrast agent dose. © RSNA, 2023 Supplemental material is available for this article. See also the editorial by Bahl in this issue.

Clinical evaluation of cylindrical regional suppression in dynamic contrast-enhanced breast MRI: An intra-individual comparison study on image quality and lesion conspicuity.

PURPOSE: To evaluate the effect of a cylindrical regional-suppression technique (CREST) on image quality and lesion conspicuity in dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) of the breast. METHOD: This was a comparative study of 67 women with 44 lesions who underwent breast DCE-MRI with CREST (CREST-DCE) and had a previous DCE-MRI without CREST (conv-DCE) available. Two radiologists assessed image quality parameters and lesion conspicuity using five-point Likert scales. In an intra-individual comparison, the effects of CREST on image quality (strong degradation to strong improvement) were assessed. Moreover, both radiologists identified the post-contrast phase, which benefited the most from using CREST in direct comparison. The statistical analysis included the Wilcoxon signed-rank test. RESULTS: Cardiac motion-rated artefacts were significantly reduced in CREST-DCE compared to conv-DCE (3.6 ± 1.2 [CREST-DCE] vs 2.1 ± 0.8 [conv-DCE], p < 0.001). At the axilla, the visualisation of anatomical structures (3.9 ± 1.0 vs 2.3 ± 1.2, p < 0.001) and the skin contour (4.3 ± 0.8 vs 3.0 ± 1.1, p < 0.001) were significantly improved in CREST-DCE, whereas ghosting artefacts were significantly less pronounced (3.8 ± 1.1 vs 2.4 ± 1.0, p < 0.001). The parasternal region was similarly assessable using both techniques (4.3 ± 1.1 vs 4.2 ± 1.2, p = 0.47). In direct comparison, CREST-DCE images were classified as "improved" in 54/67 and "equivalent" in 13/67 exams. The effects of CREST were found to be most pronounced in the very early post-contrast phase (32/67). The lesion conspicuity was rated similar for CREST and conv-DCE (4.7 ± 0.7 vs 4.8 ± 0.2, p = 0.18). CONCLUSIONS: CREST appears to be an effective tool to reduce cardiac motion-related artefacts and, therefore, may improve image quality in breast DCE-MRI without impairing lesion conspicuity.

Plant-based model for the visual evaluation of electroporated area after irreversible electroporation and its comparison to in-vivo animal data.

Electroporation (EP) is widely used in medicine, such as cancer treatment, in form of electrochemotherapy or irreversible electroporation (IRE). For EP device testing, living cells or tissue inside a living organism (including animals) are needed. Plant-based models seem to be a promising alternative to substitute animal models in research. The aim of this study is to find a suitable plant-based model for visual evaluation of IRE, and to compare the geometry of electroporated areas with in-vivo animal data.For this purpose, a variety of fruit and vegetables were selected and visually evaluated after 0/1/2/4/6/8/12/16/24 h post-EP. Apple and potato were found to be suitable models as they enabled a visual evaluation of the electroporated area. For these models, the size of the electroporated area was determined after 0/1/2/4/6/8/12/16/24 h. For apples, a well-defined electroporated area was visual within two hours, while in potatoes it reached a plateau after eight hours only. The electroporated area of apple, which showed the fastest visual results was then compared to a retrospectively evaluated swine liver IRE dataset which had been obtained for similar conditions. The electroporated area of the apple and swine liver both showed a spherical geometry of comparable size. For all experiments, the standard protocol for human liver IRE was followed. To conclude, potato and apple were found to be suitable plant-based models for the visual evaluation of electroporated area after irreversible EP, with apple being the best choice for fast visual results. Given the comparable range, the size of the electroporated area of the apple may be promising as a quantitative predictor in animal tissue. Even if plant-based models cannot completely replace animal experiments, they can be used in the early stages of EP device development and testing, decreasing animal experiments to the necessary minimum.

Getting Cartilage Thickness Measurements Right: A Systematic Inter-Method Comparison Using MRI Data from the Osteoarthritis Initiative.

OBJECTIVE: Magnetic resonance imaging is the standard imaging modality to assess articular cartilage. As the imaging surrogate of degenerative joint disease, cartilage thickness is commonly quantified after tissue segmentation. In lack of a standard method, this study systematically compared five methods for automatic cartilage thickness measurements across the knee joint and as a function of region and sub-region: 3D mesh normals (3D-MN), 3D nearest neighbors (3D-NN), 3D ray tracing (3D-RT), 2D centerline normals (2D-CN), and 2D surface normals (2D-SN). DESIGN: Based on the manually segmented femoral and tibial cartilage of 507 human knee joints, mean cartilage thickness was computed for the entire femorotibial joint, 4 joint regions, and 20 subregions using these methods. Inter-method comparisons of mean cartilage thickness and computation times were performed by one-way analysis of variance (ANOVA), Bland-Altman analyses and Lin's concordance correlation coefficient (CCC). RESULTS: Mean inter-method differences in cartilage thickness were significant in nearly all subregions (P < 0.001). By trend, mean differences were smallest between 3D-MN and 2D-SN in most (sub)regions, which is also reflected by highest quantitative inter-method agreement and CCCs. 3D-RT was prone to severe overestimation of up to 2.5 mm. 3D-MN, 3D-NN, and 2D-SN required mean processing times of ≤5.3 s per joint and were thus similarly efficient, whereas the time demand of 2D-CN and 3D-RT was much larger at 133 ± 29 and 351 ± 10 s per joint (P < 0.001). CONCLUSIONS: In automatic cartilage thickness determination, quantification accuracy and computational burden are largely affected by the underlying method. Mesh and surface normals or nearest neighbor searches should be used because they accurately capture variable geometries while being time-efficient.

Feasibility study of 2D Dixon-Magnetic Resonance Fingerprinting (MRF) of breast cancer.

Purpose: Application of MRF to evaluate the feasibility of 2D Dixon blurring-corrected MRF (2DDb-cMRF) to differentiate breast cancer (BC) from normal fibroglandular tissue (FGT). Methods: Prospective study on 14 patients with unilateral BC on 1.5 T system/axial T2w-TSE sequence, 2DDb-cMRF, B1 map, dynamic contrast-enhanced (DCE) T1-w GE-series. Mean T1 and T2 values and standard deviations were computed in the BC-/FGT-ROI on pre-/post-contrast MRF-maps and their differences were tested by two-tailed student t-test.Accuracy and repeatability of MRF were evaluated in a phantom experiment with gelatin with Primovist surrounded by fat.The T1 reduction between pre-/post-contrast MRF-maps was correlated to DCE signal enhancement in the last image post-contrast through the Pearson´s correlation coefficient (r) and for the phantom validation experiment through the Lin's concordance correlation coefficient (CCC).Visual evaluation of cancers on MRF-Maps was performed by rating each MRF-Map by 3 radiologists. Results: T1- and T2-MRF values of BC vs. FGT were for T1 and T2 pre-contrast respectively: 1147 ± 1 ms vs. 1052 ± 9 ms (p = 0.007) and 83 ± 1 ms vs. 73 ± 1 ms (p = 0.03); post-contrast respectively: 367.3 ± 121.5 ms vs. 690.3 ± 200.3 ms (p = 0.0005) and 76.9 ± 11.5 ms vs. 69.8 ± 15.2 ms (p = 0.12). r was positive (FGT r = 0.7; BC r = 0.6). CCC was 0.999 for T1 and 0.994 for T2. In the T1- and T2-MRF-Maps before contrast respectively (7,7,8)/14 and (5,9,8)/14 cancers were visible to the readers; afterwards, (11,12,12)/14 and (5,6,11)/14. Conclusions: MRF is promising for distinction between BC and FGT as well as for analyzing pre-/post-contrast T1 changes. However, its potential for differential diagnosis warrants further studies.

Varus stress MRI in the refined assessment of the posterolateral corner of the knee joint.

Magnetic resonance imaging (MRI) is commonly used to assess traumatic and non-traumatic conditions of the knee. Due to its complex and variable anatomy, the posterolateral corner (PLC)-often referred to as the joint's dark side-remains diagnostically challenging. We aimed to render the diagnostic evaluation of the PLC more functional by combining MRI, varus loading, and image post-processing in a model of graded PLC injury that used sequential transections of the lateral collateral ligament, popliteus tendon, popliteofibular ligament, and anterior cruciate ligament. Ten human cadaveric knee joint specimens underwent imaging in each condition as above, and both unloaded and loaded using an MR-compatible device that standardized loading (of 147 N) and position (at 30° flexion). Following manual segmentation, 3D joint models were used to computationally measure lateral joint space opening for each specimen, configuration, and condition, while manual measurements provided the reference standard. With more extensive ligament deficiency and loading, lateral joint spaces increased significantly. In conclusion, varus stress MRI allows comprehensive PLC evaluation concerning structural integrity and associated functional capacity. Beyond providing normative values of lateral compartment opening, this study has potential implications for diagnostic and surgical decision-making and treatment monitoring in PLC injuries.

Theranostic Trigger-Responsive Carbon Monoxide-Generating Microbubbles.

Carbon monoxide (CO) is a gaseous signaling molecule that modulates inflammation, cell survival, and recovery after myocardial infarction. However, handling and dosing of CO as a compressed gas are difficult. Here, light-triggerable and magnetic resonance imaging (MRI)-detectable CO release from dimanganese decacarbonyl (CORM-1) are demonstrated, and the development of CORM-1-loaded polymeric microbubbles (COMB) is described as an ultrasound (US)- and MRI-imageable drug delivery platform for triggerable and targeted CO therapy. COMB are synthesized via a straightforward one-step loading protocol, present a narrow size distribution peaking at 2 µm, and show excellent performance as a CORM-1 carrier and US contrast agent. Light irradiation of COMB induces local production and release of CO, as well as enhanced longitudinal and transversal relaxation rates, enabling MRI monitoring of CO delivery. Proof-of-concept studies for COMB-enabled light-triggered CO release show saturation of hemoglobin with CO in human blood, anti-inflammatory differentiation of macrophages, reduction of hypoxia-induced reactive oxygen species (ROS) production, and inhibition of ischemia-induced apoptosis in endothelial cells and cardiomyocytes. These findings indicate that CO-generating MB are interesting theranostic tools for attenuating hypoxia-associated and ROS-mediated cell and tissue damage in cardiovascular disease.

Fast, Accurate, and Robust T2 Mapping of Articular Cartilage by Neural Networks.

For T2 mapping, the underlying mono-exponential signal decay is traditionally quantified by non-linear Least-Squares Estimation (LSE) curve fitting, which is prone to outliers and computationally expensive. This study aimed to validate a fully connected neural network (NN) to estimate T2 relaxation times and to assess its performance versus LSE fitting methods. To this end, the NN was trained and tested in silico on a synthetic dataset of 75 million signal decays. Its quantification error was comparatively evaluated against three LSE methods, i.e., traditional methods without any modification, with an offset, and one with noise correction. Following in-situ acquisition of T2 maps in seven human cadaveric knee joint specimens at high and low signal-to-noise ratios, the NN and LSE methods were used to estimate the T2 relaxation times of the manually segmented patellofemoral cartilage. In-silico modeling at low signal-to-noise ratio indicated significantly lower quantification error for the NN (by medians of 6−33%) than for the LSE methods (p < 0.001). These results were confirmed by the in-situ measurements (medians of 10−35%). T2 quantification by the NN took only 4 s, which was faster than the LSE methods (28−43 s). In conclusion, NNs provide fast, accurate, and robust quantification of T2 relaxation times.

Monitoring the Remodeling of Biohybrid Tissue-Engineered Vascular Grafts by Multimodal Molecular Imaging.

Tissue-engineered vascular grafts (TEVGs) with the ability to grow and remodel open new perspectives for cardiovascular surgery. Equipping TEVGs with synthetic polymers and biological components provides a good compromise between high structural stability and biological adaptability. However, imaging approaches to control grafts' structural integrity, physiological function, and remodeling during the entire transition between late in vitro maturation and early in vivo engraftment are mandatory for clinical implementation. Thus, a comprehensive molecular imaging concept using magnetic resonance imaging (MRI) and ultrasound (US) to monitor textile scaffold resorption, extracellular matrix (ECM) remodeling, and endothelial integrity in TEVGs is presented here. Superparamagnetic iron-oxide nanoparticles (SPION) incorporated in biodegradable poly(lactic-co-glycolic acid) (PLGA) fibers of the TEVGs allow to quantitatively monitor scaffold resorption via MRI both in vitro and in vivo. Additionally, ECM formation can be depicted by molecular MRI using elastin- and collagen-targeted probes. Finally, molecular US of αv ß3 integrins confirms the absence of endothelial dysfunction; the latter is provocable by TNF-α. In conclusion, the successful employment of noninvasive molecular imaging to longitudinally evaluate TEVGs remodeling is demonstrated. This approach may foster its translation from in vitro quality control assessment to in vivo applications to ensure proper prostheses engraftment.

Comprehensive Assessment of Medial Knee Joint Instability by Valgus Stress MRI.

Standard clinical MRI techniques provide morphologic insights into knee joint pathologies, yet do not allow evaluation of ligament functionality or joint instability. We aimed to study valgus stress MRI, combined with sophisticated image post-processing, in a graded model of medial knee joint injury. To this end, eleven human cadaveric knee joint specimens were subjected to sequential injuries to the superficial medial collateral ligament (sMCL) and the anterior cruciate ligament (ACL). Specimens were imaged in 30° of flexion in the unloaded and loaded configurations (15 kp) and in the intact, partially sMCL-deficient, completely sMCL-deficient, and sMCL- and ACL-deficient conditions using morphologic sequences and a dedicated pressure-controlled loading device. Based on manual segmentations, sophisticated 3D joint models were generated to compute subchondral cortical distances for each condition and configuration. Statistical analysis included appropriate parametric tests. The medial compartment opened gradually as a function of loading and injury, especially anteriorly. Corresponding manual reference measurements by two readers confirmed these findings. Once validated in clinical trials, valgus stress MRI may comprehensively quantify medial compartment opening as a functional imaging surrogate of medial knee joint instability and qualify as an adjunct diagnostic tool in the differential diagnosis, therapeutic decision-making, and monitoring of treatment outcomes.

In-Situ Cartilage Functionality Assessment Based on Advanced MRI Techniques and Precise Compartmental Knee Joint Loading through Varus and Valgus Stress.

Stress MRI brings together mechanical loading and MRI in the functional assessment of cartilage and meniscus, yet lacks basic scientific validation. This study assessed the response-to-loading patterns of cartilage and meniscus incurred by standardized compartmental varus and valgus loading of the human knee joint. Eight human cadaveric knee joints underwent imaging by morphologic (i.e., proton density-weighted fat-saturated and 3D water-selective) and quantitative (i.e., T1ρ and T2 mapping) sequences, both unloaded and loaded to 73.5 N, 147.1 N, and 220.6 N of compartmental pressurization. After manual segmentation of cartilage and meniscus, morphometric measures and T2 and T1ρ relaxation times were quantified. CT-based analysis of joint alignment and histologic and biomechanical tissue measures served as references. Under loading, we observed significant decreases in cartilage thickness (p < 0.001 (repeated measures ANOVA)) and T1ρ relaxation times (p = 0.001; medial meniscus, lateral tibia; (Friedman test)), significant increases in T2 relaxation times (p ≤ 0.004; medial femur, lateral tibia; (Friedman test)), and adaptive joint motion. In conclusion, varus and valgus stress MRI induces meaningful changes in cartilage and meniscus secondary to compartmental loading that may be assessed by cartilage morphometric measures as well as T2 and T1ρ mapping as imaging surrogates of tissue functionality.

Study of flow effects on temperature-controlled radiofrequency ablation using phantom experiments and forward simulations.

PURPOSE: Blood flow is known to add variability to hepatic radiofrequency ablation (RFA) treatment outcomes. However, few studies exist on its impact on temperature-controlled RFA. Hence, we investigate large-scale blood flow effects on temperature-controlled RFA in flow channel experiments and numerical simulations. METHODS: Ablation zones were induced in tissue-mimicking, thermochromic phantoms with a single flow channel, using an RF generator with temperature-controlled power delivery and a monopolar needle electrode. Channels were generated by molding the phantom around a removable rod. Channel radius and saline flow rate were varied to study the impact of flow on (i) the ablated cross-sectional area, (ii) the delivered generator power, and (iii) the occurrence of directional effects on the thermal lesion. Finite volume simulations reproducing the experimental geometry, flow conditions, and generator power input were conducted and compared to the experimental ablation outcomes. RESULTS: Vessels of different channel radii r affected the ablation outcome in different ways. For r = 0.275  mm, the ablated area decreased with increasing flow rate while the energy input was hardly affected. For r = 0.9  mm and r = 2.3  mm, the energy input increased toward larger flow rates; for these radii, the ablated area decreased and increased toward larger flow rates, respectively, while still being reduced overall as compared to the reference experiment without flow. Directional effects, that is, local shrinking of the lesion upstream of the needle and an extension thereof downstream, were observed only for the smallest radius. The simulations qualitatively confirmed these observations. As compared to performing the simulations without flow, including flow effects in the simulations reduced the mean absolute error between experimental and simulated ablated areas from 0.23 to 0.12. CONCLUSION: While the temperature control mechanism did not detect the heat sink effect in the case of the smallest channel radius, it counteracted the heat sink effect in the case of the larger channel radii with an increased energy input; this explains the increase in ablated area toward high flow rates (for r = 2.3  mm). The experiments in a simple phantom setup, thus, contribute to a good understanding of the phenomenon and are suitable for model validation.

Molecular magnetic resonance imaging of Alpha-v-Beta-3 integrin expression in tumors with ultrasound microbubbles.

Microbubbles (MB) are used as ultrasound (US) contrast agents and can be efficiently targeted against markers of angiogenesis and inflammation. Due to their gas core, MB locally alter susceptibilities in magnetic resonance imaging (MRI), but unfortunately, the resulting contrast is low and not sufficient to generate powerful molecular MRI probes. Therefore, we investigated whether a potent molecular MR agent can be generated by encapsulating superparamagnetic iron oxide nanoparticles (SPION) in the polymeric shell of poly (n-butylcyanoacrylate) (PBCA) MB and targeted them against αvß3 integrins on the angiogenic vasculature of 4T1 murine breast carcinomas. SPION-MB consist of an air core and a multi-layered polymeric shell enabling efficient entrapment of SPION. The mean size of SPION-MB was 1.61 ± 0.32 µm. Biotin-streptavidin coupling was employed to functionalize the SPION-MB with cyclic RGDfK (Arg-Gly-Asp) and RADfK (Arg-Ala-Asp) peptides. Cells incubated with RGD-SPION-MB showed enhanced transverse relaxation rates compared with SPION-MB and blocking αvß3 integrin receptors with excess free cRGDfK significantly reduced RGD-SPION-MB binding. Due to the fast binding of RGD-SPION-MB in vivo, dynamic susceptibility contrast MRI was employed to track their retention in tumors in real-time. Higher retention of RGD-SPION-MB was observed compared with SPION-MB and RAD-SPION-MB. To corroborate our MRI results, molecular US was performed the following day using the destruction-replenishment method. Both imaging modalities consistently indicated higher retention of RGD-SPION-MB in angiogenic vessels compared with SPION-MB and RAD-SPION-MB. Competitive blocking experiments in mice further confirmed that the binding of RGD-SPION-MB to αvß3 integrin receptors is specific. Overall, this study demonstrates that RGD-SPION-MB can be employed as molecular MR/US contrast agents and are capable of assessing the αvß3 integrin expression in the neovasculature of malignant tumors.

Confounding factors in breast magnetic resonance fingerprinting: B1+ , slice profile, and diffusion effects.

PURPOSE: Magnetic resonance fingerprinting (MRF) offers rapid quantitative imaging but may be subject to confounding effects (CE) if these are not included in the model-based reconstruction. This study characterizes the influence of in-plane B1+ , slice profile and diffusion effects on T1 and T2 estimation in the female breast at 1.5T. METHODS: Simulations were used to predict the influence of each CE on the accuracy of MRF and to investigate the influence of electronic noise and spiral aliasing artefacts. The experimentally observed bias in regions of fibroglandular tissue (FGT) and fatty tissue (FT) was analyzed for undersampled spiral breast MRF data of 6 healthy volunteers by performing MRF reconstruction with and without a CE. RESULTS: Theoretic analysis predicts T1 under-/T2 overestimation if the nominal flip angles are underestimated and inversely, T1 under-/T2 overestimation if omitting slice profile correction, and T1 under-/T2 underestimation if omitting diffusion in the signal model. Averaged over repeated signal simulations, including spiral aliasing artefacts affected precision more than accuracy. Strong in-plane B1+ effects occurred in vivo, causing T2 left-right inhomogeneity between both breasts. Their correction decreased the T2 difference from 29 to 5 ms in FGT and from 29 to 9 ms in FT. Slice profile correction affected FGT T2 most strongly, resulting in -22% smaller values. For the employed spoiler gradient strengths, diffusion did not affect the parameter maps, corresponding well with theoretic predictions. CONCLUSION: Understanding CEs and their relative significance for an MRF sequence is important when defining an MRF signal model for accurate parameter mapping.

(Hybrid) SPECT and PET Technologies.

SPECT and PET are nuclear tomographic imaging modalities that visualize functional information based on the accumulation of radioactive tracer molecules. However, SPECT and PET lack anatomical information, which has motivated their combination with an anatomical imaging modality such as CT or MRI. This chapter begins with an overview over the fundamental physics of SPECT and PET followed by a presentation of the respective detector technologies, including detection requirements, principles and different detector concepts. The reader is subsequently provided with an introduction into hybrid imaging concepts, before a dedicated section presents the challenges that arise when hybridizing SPECT or PET with MRI, namely, mutual distortions of the different electromagnetic fields in MRI on the nuclear imaging system and vice versa. The chapter closes with an overview about current hybrid imaging systems of both clinical and preclinical kind. Finally, future developments in hybrid SPECT and PET technology are discussed.

Spiral blurring correction with water-fat separation for magnetic resonance fingerprinting in the breast.

PURPOSE: Magnetic resonance fingerprinting (MRF) with spiral readout enables rapid quantification of tissue relaxation times. However, it is prone to blurring because of off-resonance effects. Hence, fat blurring into adjacent regions might prevent identification of small tumors by their quantitative T1 and T2 values. This study aims to correct for the blurring artifacts, thereby enabling fast quantitative mapping in the female breast. METHODS: The impact of fat blurring on spiral MRF results was first assessed by simulations. Then, MRF was combined with 3-point Dixon water-fat separation and spiral blurring correction based on conjugate phase reconstruction. The approach was assessed in phantom experiments and compared to Cartesian reference measurements, namely inversion recovery (IR), multi-echo spin echo (MESE), and Cartesian MRF, by normalized root-mean-square error (NRMSE) and SD calculations. Feasibility is further demonstrated in vivo for quantitative breast measurements of 6 healthy female volunteers, age range 24-31 y. RESULTS: In the phantom experiment, the blurring correction reduced the NRMSE per phantom vial on average from 16% to 8% for T1 and from 18% to 11% for T2 when comparing spiral MRF to IR/MESE sequences. When comparing to Cartesian MRF, the NRMSE reduced from 15% to 8% for T1 and from 12% to 7% for T2 . Furthermore, SDs decreased. In vivo, the blurring correction removed fat bias on T1 /T2 from a rim of ~7-8 mm width adjacent to fatty structures. CONCLUSION: The blurring correction for spiral MRF yields improved quantitative maps in the presence of water and fat.

MR image corrections for PET-induced gradient distortions.

The combination of positron emission tomography (PET) and magnetic resonance imaging (MRI) by using PET inserts in existing MRI scanners is an attractive approach. When designing the PET insert, mutual influences of both imaging modalities need to be minimized. The gradient magnetic fields induce eddy currents in all conductive components of the PET insert. Eddy currents produce superimposing magnetic fields distorting the gradient magnetic field. However, the gradient magnetic fields determine how the MRI data is acquired in the k-space. A distorted gradient shape produces a distorted k-space trajectory which then results in a distorted image. The dynamic performance of the gradient system can be characterized by measuring its gradient impulse response function (GIRF). Knowledge of the GIRF enables to correct the k-space trajectory and thereby enables to reduce image distortions. We characterized the influence of a preclinical PET insert, i.e. the Hyperion IID, on the gradient performance of a 3 T MRI scanner. The GIRFs up to the second order spherical harmonics were determined with and without the PET insert by measuring frequency-swept gradient pulses with an NMR probe. We calculated a corrected k-space trajectory of a single-shot spiral sequence using the measured GIRFs. The low-pass characteristic of the gradient system only slightly increased in the presence of the PET insert. We showed a minor influence of the PET insert on the GIRFs, demonstrating the high gradient transparency of the PET insert. The single-shot spiral image measured in the presence of the PET insert and reconstructed with the uncorrected k-space trajectory was blurred and distorted. We strongly reduced the blurring and distortion by using the corrected k-space trajectory predicted with the measured GIRFs up to the first order spherical harmonics. Slight blurring remained in the corrected image caused by either second order spherical harmonics or distortions of the static magnetic field.