Sustainable methods for the carboxymethylation and methylation of ursolic acid with dimethyl carbonate under mild and acidic conditions.

Ursolic acid is a triterpene plant extract that exhibits significant potential as an anti-cancer, anti-tumour, and anti-inflammatory agent. Its direct use in the pharmaceutical industry is hampered by poor uptake of ursolic acid in the human body coupled with rapid metabolism causing a decrease in bioactivity. Modification of ursolic acid can overcome such issues, however, use of toxic reagents, unsustainable synthetic routes and poor reaction metrics have limited its potential. Herein, we demonstrate the first reported carboxymethylation and/or methylation of ursolic acid with dimethyl carbonate (DMC) as a green solvent and sustainable reagent under acidic conditions. The reaction of DMC with ursolic acid, in the presence of PTSA, ZnCl2, or H2SO4-SiO2 yielded the carboxymethylation product 3ß-[[methoxy]carbonyl]oxyurs-12-en-28-oic acid, the methylation product 3ß-methoxyurs-12-en-28-oic acid and the dehydration product urs-2,12-dien-28-oic acid. PTSA demonstrated high conversion and selectivity towards the previously unreported carboxymethylation of ursolic acid, while the application of formic acid in the system led to formylation of ursolic acid (3ß-formylurs-12-en-28-oic acid) in quantitative yields via esterification, with DMC acting solely as a solvent. Meanwhile, the methylation product of ursolic acid, 3ß-methoxyurs-12-en-28-oic acid, was successfully synthesised with FeCl3, demonstrating exceptional conversion and selectivity, >99% and 99%, respectively. Confirmed with the use of qualitative and quantitative green metrics, this result represents a significant improvement in conversion, selectivity, safety, and sustainability over previously reported methods of ursolic acid modification. It was demonstrated that these methods could be applied to other triterpenoids, including corosolic acid. The study also explored the potential pharmaceutical applications of ursolic acid, corosolic acid, and their derivatives, particularly in anti-inflammatory, anti-cancer, and anti-tumour treatments, using molecular ADMET and docking methods. The methods developed in this work have led to the synthesis of novel molecules, thus creating opportunities for the future investigation of biological activity and the modification of a wide range of triterpenoids applying acidic DMC systems to deliver novel active pharmaceutical intermediates.

Antiproliferative polyketides from fungus Xylaria cf. Longipes SWUF08-81 in different culture media.

Bioactive compounds from the wood-decay fungus Xylaria cf. longipes SWUF08-81, cultivated in three different culture media (GM, YM and PDB), were isolated. Their structures and stereochemistry were deduced from spectroscopic and MS data analysis, together with quantum chemical calculations of 13C NMR chemical shifts and electronic circular dichroism (ECD) spectra. Five undescribed polyketides including dibenzofuran (1), mellein (2), dihydroisocoumarin (15), and two pyrans (16, 17), together with twenty-three compounds were determined. Compounds 18 and 20 were significantly toxic against cancer cell lines (HCT116, HT29, MCF-7 and HeLa) based on the MTT assay. Quantification by HPLC showed that 18 was produced three-fold higher in the broth of PDB than YM. These studies showed that the production of different compounds were primarily dependent on nutrition sources and it has given a starting point for the growth optimization conditions for the scaling up of bioactive compounds production.

Application of hindered ether solvents for palladium catalyzed Suzuki-Miyaura, Sonogashira and cascade Sonogashira cross-coupling reactions.

Cross-coupling and cascade reactions typically rely on unsustainable and toxic volatile organic solvents. 2,2,5,5-Tetramethyloxolane (TMO) and 2,5-diethyl-2,5-dimethyloxolane (DEDMO) are both inherently non-peroxide forming ethers, and have been used in this work as effective, more sustainable, and potentially bio-based alternative solvents for Suzuki-Miyaura and Sonogashira reactions. Suzuki-Miyaura reactions demonstrated good yields for a range of substrates, 71-89% in TMO and 63-92% in DEDMO. In addition, a Sonogashira reaction exhibited the excellent yields of 85-99% performed in TMO, which was significantly higher than traditional volatile organic solvents, THF or toluene, and higher than those reported for another non-peroxide forming ether, namely eucalyptol. Cascade Sonogashira reactions utilizing a simple annulation methodology were particularly effective in TMO. Furthermore, a green metric assessment confirmed that the methodology employing TMO was more sustainable and greener than the traditional solvents THF and toluene, thereby demonstrating the promise of TMO as an alternative solvent for Pd-catalyzed cross-coupling reactions.

Sustainable solvents for ß-diketone extraction from wheat straw wax and their molecular self-assembly into nano-structured tubules for hydrophobic coatings.

Nonpolar, nonperoxide forming, sustainable and potentially bio-based solvents, namely 2,2,5,5-tetramethyloxolane (TMO) and 2,5-diethyl-2,5-dimethyloxolane (DEDMO), were utilized as an alternative to toxic petroleum-based hydrocarbon solvents for extraction of hentriacontane-14,16-dione from waste wheat straw waxes. This work is the first to report the application of DEDMO as a solvent for the extraction of natural products. The sustainable methodology developed in this research provided considerable advantages over previously reported systems in terms of high extraction yields, excellent selectivity towards the ß-diketones and low amounts of waste generated. DEDMO provided the highest recovery yield for all the sustainable solvents investigated, recovering 23.7% of the wax (which is a 68.8% yield of the ß-diketone). The extracted lipophilic hentriacontane-14,16-dione was utilised in combination with the sustainable solvents TMO or DEDMO to facilitate the creation of highly hydrophobic coatings. Moreover, the use of DEDMO was found to aid in the self-assembly of nano-structured tubule formation of both the unrefined wax and isolated ß-diketone. Green metric evaluation using process mass intensity (PMI), E-factor, solvent intensity (SI), and water intensity (WI) demonstrated that the described extraction procedure for hentriacontane-14,16-dione was highly sustainable and safer than the previous methodology. This sustainable manufacturing process may create the potential to valorise agricultural wastes as part of a holistic biorefinery.

Acid-catalysed reactions of amines with dimethyl carbonate.

Highly effective acid-catalysed reactions of amines with dimethyl carbonate (DMC) have been conducted with significant yields and selectivity of carboxymethylation or methylation products. Lewis acids (FeCl3, ZnCl2, and AlCl3·6H2O), Brønsted acids (PTSA, acetic, and formic acids), and acids supported on silica (silica sulfuric and silica perchlorate) resulted in carboxymethylation of primary aliphatic amines with high conversions. It was found that the Lewis acid FeCl3 also promoted carboxymethylation of primary aromatic amines and secondary amines. At both 90 °C or an elevated temperature of 150 °C under pressure, AlCl3·6H2O demonstrated highly selective monomethylation of aromatic amines. In addition, both silica sulfuric acid and silica perchlorate at 90 °C exhibited no conversion for secondary amines but enhanced carboxymethylation with high conversions of 80.7-87.5% and selectivity of >99.00% at 150 °C in a pressure reactor. At 1.0 equivalent, both promoted excellent conversion and selectivity of primary aliphatic amines at 90 °C. In addition, they were easily recovered and reused for at least four additional reactions without significant loss of efficiency with consistent conversions and selectivity. Green metrics evaluation for the silica sulfuric acid-catalysed reaction highlighted the sustainability features of the process. Silica-supported catalysts are highly stable, making them ideal alternative catalysts for the methylation and carbonylation of various amines with DMC. Acid-catalysed DMC reactions of amines may expand the substrate scope and offer new opportunities for developing sustainable organic synthetic methodologies.

Effect of harvest time on the compositional changes in essential oils, cannabinoids, and waxes of hemp (Cannabis sativa L.).

Demand for cannabinoid is growing, with the global market expected to reach $9.69 billion by 2025. Understanding how chemical composition changes in hemp at different harvest times is crucial to maximizing this industrial crop value. Important compositional changes in three different compound classes (essential oils, cannabinoids, and lipids) from inflorescences (tops), leaves, and stems of hemp (Cannabis sativa L., Finola variety) at different harvesting stages have been investigated. Over 85% of the total extracts from the tops were cannabinoids, while leaves demonstrated the greatest quantities of wax ester and sterols. Essential oil and cannabinoid increased in tops until full flowering (third harvest), reaching 2030 µg g-1 and 39 475 µg g-1, respectively. Cannabinoids decreased at seed maturity (final harvest) to 26 969 µg g-1. This demonstrates the importance of early harvesting to maximize cannabidiol (CBD), which is highly sought after for its therapeutic and pharmacological properties. A total of 21 161 µg g-1 of CBD was extracted from the tops at full flowering (third harvest); however, a significant increase (63%) in the banned psychoactive tetrahydrocannabinol (THC) was observed from budding (157 µg g-1 of biomass) to the full flowering (9873 µg g-1 of biomass). Harvesting the tops after budding is preferable due to the high CBD content and low amounts of THC.

New furan derivatives from Annulohypoxylon spougei fungus.

Two new furan derivatives, annulofurans A-B (1-2), together with six known compounds were isolated from Annulohypoxylon spougei fungus. The structures were determined based on NMR and mass spectrometry data. The absolute configurations of annulofurans A-B were determined by Electronic Circular Dichroism (ECD) experiment and comparisons with the experimental ECD spectra of synthesized stereoisomers. The evaluation of the effects on radish and ruzi grass radicle elongation by the isolated compounds showed that annulofuran A affected radicle elongation of ruzi grass. The known 2-hydroxyphenylacetic acid methyl ester (7) had significant effects against both radish and ruzi grass radicle elongation, which were comparable to the commercial herbicide, glyphosate.

High pressure systems as sustainable extraction and pre-treatment technologies for a holistic corn stover biorefinery.

This mini-review assesses supercritical carbon dioxide (scCO2) extraction and high-pressure carbon dioxide pre-treatment technologies for valorisation of corn stover agricultural residues with particular focus on showing how these can aid in the creation of a holistic biorefineries. Corn stover is currently the largest source of agriculture residues in the USA, as such there is significant potential for exploitation to yield valuable chemicals. ScCO2 extraction could lead to the recovery of a variety of different chemicals which include flavonoids, sterols, steroid ketones, hydrocarbons, saturated fatty acids, unsaturated fatty acids, fatty alcohols, phenolics and triterpenoids. Importantly, recent studies have not only demonstrated that supercritical extraction can be utilized for the recovery of plant lipids for use in consumer products, including nutraceuticals and personal care, but the processing of treated biomass can lead to enhanced yields and recovery of other products from biorefinery processes. Despite the great potential and opportunities for using scCO2 and high-pressure systems in a biorefinery context their real-world application faces significant challenges to overcome before it is widely applied. Such challenges have also been discussed in the context of this mini-review.