Hip Fractures in Elderly Individuals Did Not Decrease during the Coronavirus Disease 2019 Pandemic: Insights from the 2015 and 2020 Niigata Prefecture Fragility Hip Fracture Surveys.

Background and Objectives: The incidence of osteoporotic hip fractures in Niigata Prefecture, Japan, has been studied approximately every 5 years since 1985. In 2020, as in previous surveys, a prefecture-wide survey was initiated as planned; however, the global outbreak of the coronavirus disease 2019 (COVID-19) began simultaneously. This study aimed to compare the results of the 2015 and 2020 Niigata Prefecture Fragility Hip Fracture Surveys to determine whether the COVID-19 pandemic affected the occurrence and treatment of proximal femoral fractures throughout Niigata Prefecture. Materials and Methods: In this study, data from the 2015 and 2020 Niigata Prefecture Fragility Hip Fracture Surveys were used. Data were obtained from registration forms returned by hospitals and clinics in Niigata Prefecture for patients living therein who were diagnosed with osteoporotic hip fractures over a 1-year period in 2015 and 2020. Results: In Niigata Prefecture, the total annual number of fractures increased from 3181 in 2015 to 3369 in 2020, whereas the age-adjusted fracture rate decreased. Regarding the location of the fractures, the proportion of outdoor fractures was lower than that of indoor fractures. The proportion of outdoor fractures decreased over the year as a whole, but in particular, the proportion of outdoor fractures decreased significantly under the issued emergency declarations. The most common reasons for delayed surgery related to COVID-19 were "waiting for PCR results" and "quarantine for fever," accounting for approximately 1.9% of all causes. Conclusions: In Niigata Prefecture, Japan, the effect of the COVID-19 pandemic on the number and rate of fractures was minuscule. The proportion of indoor fractures to outdoor fractures increased during the emergency declaration period. Considering that the number of fragility fractures remains the same during an infectious disease pandemic such as COVID-19, it is necessary to ensure that healthcare resources are available to deal with them.

Accuracy of ZedView, the Software for Three-Dimensional Measurement and Preoperative Planning: A Basic Study.

Background and Objectives: In the field of orthopedic surgery, novel techniques of three-dimensional shape modeling using two-dimensional tomographic images are used for bone-shape measurements, preoperative planning in joint-replacement surgery, and postoperative evaluation. ZedView® (three-dimensional measurement instrument and preoperative-planning software) had previously been developed. Our group is also using ZedView® for preoperative planning and postoperative evaluation for more accurate implant placement and osteotomy. This study aimed to evaluate the measurement error in this software in comparison to a three-dimensional measuring instrument (3DMI) using human bones. Materials and Methods: The study was conducted using three bones from cadavers: the pelvic bone, femur, and tibia. Three markers were attached to each bone. Study 1: The bones with markers were fixed on the 3DMI. For each bone, the coordinates of the center point of the markers were measured, and the distances and angles between these three points were calculated and defined as "true values." Study 2: The posterior surface of the femur was placed face down on the 3DMI, and the distances from the table to the center of each marker were measured and defined as "true values." In each study, the same bone was imaged using computed tomography, measured with this software, and the measurement error from the corresponding "true values" was calculated. Results: Study 1: The mean diameter of the same marker using the 3DMI was 23.951 ± 0.055 mm. Comparisons between measurements using the 3DMI and this software revealed that the mean error in length was <0.3 mm, and the error in angle was <0.25°. Study 2: In the bones adjusted to the retrocondylar plane with the 3DMI and this software, the average error in the distance from the planes to each marker was 0.43 (0.32-0.58) mm. Conclusion: This surgical planning software could measure the distance and angle between the centers of the markers with high accuracy; therefore, this is very useful for pre- and postoperative evaluation.

Increased incidence among the very elderly in the 2020 Niigata Prefecture Osteoporotic Hip Fracture Study.

INTRODUCTION: A 2015 study showed a decreasing trend in the incidence of osteoporotic hip fractures in Niigata Prefecture, Japan, which had been increasing. This study aimed to investigate the incidence of osteoporotic hip fractures in 2020, determine the long-term change in the incidence of hip fractures from 1985 to 2020, and assess whether the decline in fracture incidence since 2010 has continued. MATERIALS AND METHODS: We obtained data from the registration forms submitted by hospitals and clinics of patients who lived in Niigata Prefecture and were diagnosed with osteoporotic hip fracture through a survey conducted from January 1, 2020 to December 31, 2020. RESULTS: In 2020, 3,369 hip fractures were recorded in Niigata Prefecture. Although the overall incidence of age-specific hip fractures decreased, it increased in patients aged ≥ 90 years, regardless of sex. The proportion of patients receiving anti-osteoporosis drugs prior to hip fracture increased from 7.6% in 2004 to 17.3% in 2020. Notably, surgical treatment should be performed as early as possible, and the preoperative waiting time was 2.9 days, which was mainly due to holidays. CONCLUSION: The incidence of hip fractures in Niigata Prefecture has gradually increased over the past 35 years, with an increasing change observed in the very elderly recently in 2020. Although the treatment of osteoporotic hip fractures in Niigata Prefecture is adequate, improvements may include increasing the rate of adoption of osteoporosis treatment further and decreasing the number of days of preoperative waiting.

Coordinate value of the femoral head center estimated using those of the tip of the greater trochanter and lesser trochanter.

Several studies have reported estimating the femoral head center (FC) from reference points on the pelvis; however, none have reported estimates obtained from those on the femur. In this cross-sectional study, we investigated the estimated point of FC from the coordinate value of the tip of the greater trochanter (GT) and lesser trochanter (LT) using a formula with a three-dimensional measurement technique. We used data from 92 healthy Japanese subjects without any back or knee symptoms and no abnormalities in the hip, knee, or spine on plain radiographs. In our study, the difference in the anteroposterior direction was larger than that in the other directions. We speculate that the accuracy of defining the tip of the LT is difficult in the anteroposterior direction. Moreover, the correlation coefficients were larger for women. The reason for this was unclear because the variation in the proximal femur may be similar in women. We found that the average difference between the actual and calculated values was approximately 2 mm. We considered that the coordinate value of the FC from the tip of the GT could be estimated more accurately using the regression equation compared to previous methods based on pelvic reference points.

The association of postoperative global femoral offset with total hip arthroplasty outcomes.

Global femoral offset (GFO) and femoral offset (FO) reportedly affect outcomes following total hip arthroplasty (THA). However, FO assessed using plain radiography is affected by internal and external rotations of the hip joint. We investigated the relationship between leg length discrepancy and Harris hip score (HHS), and their influence on acetabular offset (AO), FO, GFO, anterior femoral offset, and outcomes after THA. We retrospectively evaluated 140 patients with hip osteoarthritis who underwent THA. A three-dimensional (3D) pelvis and femur model created from computed tomography (data using ZedHip software was used to investigate these parameters. The modified (m)HHS scores were significantly improved from 49.0 to 88.8 in total mHHS, 20.0-44.5 in pain, and 28.9-44.4 points in function. Significant correlations were found between the differences in AO, FO, GFO, and pain score in binominal, with maximum values of - 1.24, + 1.54, and + 0.90 mm/100 cm body height, respectively. The maximum value of GFO and mHHS in binominal was + 1.17 mm/100 cm body height (BH). The optimal range of difference of GFO was - 1.75 to 4.09 mm/100 cm BH. This is the first report using a 3D method for assessing FO. Preoperative planning using the system could improve postoperative function.

Stature estimation formulae based on bony pelvic dimensions and femoral length.

We investigated the feasibility of estimating living stature in Japanese subjects using femoral length and pelvic dimensions measured on three-dimensional (3D) pelvic models reconstructed from cross-sectional computed tomography (CT) images. For this cross-sectional study, we recruited 106 healthy Japanese subjects. Maximum and bicondylar femoral length, as well as pelvic width, depth, and height, were measured on 3D bone models reconstructed from multi-slice CT images. The correlation of stature with each parameter was evaluated, and multiple regression equations were derived as formulae for living stature estimation. Prediction accuracy was evaluated as the mean absolute difference (MAD) between the measured and estimated statures. Maximum and bicondylar femoral lengths were similar and showed strong correlations with stature (> 0.8 in both males and females). Among the pelvic dimensions, height (craniocaudal length) showed the strongest correlation with stature in both males (r = 0.649) and females (r = 0.684). Formulae using femoral length plus pelvic height provided the best estimation of living stature in both males and females (MAD, 25-26 mm). Among the studied pelvic dimensions, height provided the best estimation of living stature when used alone (MAD, 34-36 mm) in both males and females. The intraclass correlation coefficients were high (> 0.9) for both intraobserver and interobserver reliability. Femoral length and pelvic height measured on CT images are reliable predictors of living stature in the Japanese population. Such tools are particularly useful in disaster victim identification, when the long bones are often not intact but the pelvic bones are.

Anatomical sacral slope, a new pelvic parameter, is associated with lumbar lordosis and pelvic incidence in healthy Japanese women: A retrospective cross-sectional study.

PURPOSE: Anatomical sacral slope (a-SS), a pelvic anatomical parameter that does not require the center of the femoral head, strongly correlates with pelvic incidence (PI) during three-dimensional measurements in normal subjects. Sagittal alignment of spinal and pelvic parameters is typically evaluated using two-dimensional radiographs; however, the relationship between a-SS and PI has not been evaluated using radiographs. This study aimed to evaluate the correlation between a-SS and other spinal and pelvic parameters using radiographs. METHODS: We evaluated 144 healthy women. Using sagittal radiographs, we measured lumbar lordosis (LL), thoracic kyphosis, PI, SS, pelvic tilt, and a-SS, which were defined as the angle between the superior end plate of S1 and a line perpendicular to the anterior pelvic plane. Pearson coefficients were used to determine correlations, and intraobserver and interobserver intraclass correlation coefficients (ICCs) were used for validation. RESULTS: There was a strong correlation between PI and a-SS (r = 0.756). Moreover, correlations between a-SS and LL and between PI and LL were similar (r = 0.661 and r = 0.554, respectively). The intraobserver ICCs were 0.884 for a-SS and 0.840 for PI. The interobserver ICCs were 0.856 for a-SS and 0.653 for PI. CONCLUSION: a-SS was strongly correlated with PI. The correlation between a-SS and LL was equivalent to the correlation between PI and LL. Moreover, the ICC for a-SS was larger than that of PI. This study suggests that a-SS is a useful new pelvic anatomical parameter that can be used instead of PI.

Correlation of tilt of the anterior pelvic plane angle with anatomical pelvic tilt and morphological configuration of the acetabulum in patients with developmental dysplasia of the hip: a cross-sectional study.

BACKGROUND: It was previously reported that pelvises with developmental dysplasia of the hip are tilted anteriorly, which increases bony coverage of the femoral head. This study aimed to investigate the correlation between anatomical parameters of the pelvis such as pelvic incidence and anatomical pelvic tilt and functional parameters of the spine and pelvis such as tilt of the anterior pelvic plane. METHODS: We examined 84 female patients with bilateral developmental dysplasia of the hip who had undergone curved periacetabular osteotomy at author's institution. Radiographs of the thoracic to lumbar spines and the pelvis were obtained in the standing position to measure spino-pelvic parameters before surgery. Morphological parameters of the acetabulum such as the anterior center-edge (CE) angle, posterior CE angle, lateral CE angle, and acetabular anteversion were measured using a preoperative three-dimensional pelvic model reconstructed from computed tomography images. Pearson's correlation analysis was conducted to evaluate the relationship of these parameters. RESULTS: With regard to correlations between pelvic incidence (PI) and other parameters, the sacral slope (SS) value (r = 0.666) was the highest among functional parameters and the anatomical-SS value (r = 0.789) was the highest among morphological parameters. There were moderate correlations of the anterior pelvic plane angle (APPA) with pelvic tilt (PT) (r = - 0.594) and anatomical-PT (r = 0.646). With regard to correlations between spino-pelvic parameters and bony morphological parameters of the acetabulum, there was a moderate correlation between anatomical-PT and acetabular anteversion (AA) (r = 0.424). There were moderate correlations of APPA with the anterior CE angle (r = - 0.478), posterior CE angle (r = 0.432), and AA (r = 0.565). APPA had a stronger correlation with anatomical-PT (r = 0.646) than with AA. CONCLUSIONS: The tilt of the pelvis may be more dependent on anatomical-PT, a morphological parameter of the pelvis, than the lateral CE angle, anterior CE angle, posterior CE angle, and acetabular anteversion on bony coverage of the acetabulum. This study is the first to investigate the correlation between functional parameters of the pelvis and spine and morphological parameters of the pelvis and acetabulum besides PI.

Evaluation of anatomical pelvic parameters between normal, healthy men and women using three-dimensional computed tomography: a cross-sectional study of sex-specific and age-specific differences.

BACKGROUND: Sagittal spinal balance and standing posture are affected by pelvic morphology, especially pelvic incidence (PI). However, it is not difficult to identify the hip center because of overlap of the pelvis, image contrast, and soft tissue artifacts. Measurements of PI are not always suitable in all patients, especially those with osteoarthritis of the hip joint whose femoral head is nonspherical, subluxed, or dislocated. We measured PI, pelvic tilt (PT), and sacral slope (SS) as anatomical parameters using a novel three-dimensional measurement in order to compare the pelvic morphology between normal, healthy men and women. METHODS: In this cross-sectional study, we evaluated 108 Japanese subjects (55 men, 53 women) without low back or knee pain. We used the three-dimensional pelvis model adjusted to the anterior pelvic plane and measured the pelvic parameters. The subjects were stratified by age (< 50 versus ≥ 50 years) and sex. Intraobserver and interobserver reliabilities were calculated with intraclass correlation coefficients. RESULTS: There was no significant difference in PI, anatomical-PT, and anatomical-SS between sexes. There was a strong correlation between PI and anatomical-SS in men and women (R = 0.790 and 0.715, respectively). Values of anatomical-PT were lower, and values of anatomical-SS were greater among older subjects than among younger subjects; the value of PI was similar between younger and older subjects. Intraobserver and interobserver mean absolute differences were about 2 mm and 2°, respectively; the intraclass correlation coefficient was > 0.87. CONCLUSIONS: We found a strong correlation between PI and anatomical-SS in men and women. This novel measurement concept may be useful to estimate PI from anatomical-SS because the measurements of PI are not always suitable in all patients, especially those with osteoarthritis of the hip joint whose femoral head is not spherical or whose femoral head is subluxed or dislocated. This is the first report to describe the relationship between PI, anatomical-PT, and anatomical-SS as morphologic parameters with a high interclass correlation coefficient for intraobserver and interobserver reliabilities.

The H-Invitational Database (H-InvDB), a comprehensive annotation resource for human genes and transcripts.

Here we report the new features and improvements in our latest release of the H-Invitational Database (H-InvDB; http://www.h-invitational.jp/), a comprehensive annotation resource for human genes and transcripts. H-InvDB, originally developed as an integrated database of the human transcriptome based on extensive annotation of large sets of full-length cDNA (FLcDNA) clones, now provides annotation for 120 558 human mRNAs extracted from the International Nucleotide Sequence Databases (INSD), in addition to 54 978 human FLcDNAs, in the latest release H-InvDB_4.6. We mapped those human transcripts onto the human genome sequences (NCBI build 36.1) and determined 34 699 human gene clusters, which could define 34 057 (98.1%) protein-coding and 642 (1.9%) non-protein-coding loci; 858 (2.5%) transcribed loci overlapped with predicted pseudogenes. For all these transcripts and genes, we provide comprehensive annotation including gene structures, gene functions, alternative splicing variants, functional non-protein-coding RNAs, functional domains, predicted sub cellular localizations, metabolic pathways, predictions of protein 3D structure, mapping of SNPs and microsatellite repeat motifs, co-localization with orphan diseases, gene expression profiles, orthologous genes, protein-protein interactions (PPI) and annotation for gene families. The current H-InvDB annotation resources consist of two main views: Transcript view and Locus view and eight sub-databases: the DiseaseInfo Viewer, H-ANGEL, the Clustering Viewer, G-integra, the TOPO Viewer, Evola, the PPI view and the Gene family/group.