In-depth analysis of ambient air pollution changes due to the COVID-19 pandemic in the Asian Monsoon region.

The COVID-19 pandemic has given a chance for researchers and policymakers all over the world to study the impact of lockdowns on air quality in each country. This review aims to investigate the impact of the restriction of activities during the lockdowns in the Asian Monsoon region on the main criteria air pollutants. The various types of lockdowns implemented in each country were based on the severity of the COVID-19 pandemic. The concentrations of major air pollutants, especially particulate matter (PM) and nitrogen dioxide (NO2), reduced significantly in all countries, especially in South Asia (India and Bangladesh), during periods of full lockdown. There were also indications of a significant reduction of sulfur dioxide (SO2) and carbon monoxide (CO). At the same time, there were indications of increasing trends in surface ozone (O3), presumably due to nonlinear chemistry associated with the reduction of oxides of nitrogens (NOX). The reduction in the concentration of air pollutants can also be seen in satellite images. The results of aerosol optical depth (AOD) values followed the PM concentrations in many cities. A significant reduction of NO2 was recorded by satellite images in almost all cities in the Asian Monsoon region. The major reductions in air pollutants were associated with reductions in mobility. Pakistan, India, Bangladesh, Myanmar, Vietnam, and Taiwan had comparatively positive gross domestic product growth indices in comparison to other Asian Monsoon nations during the COVID-19 pandemic. A positive outcome suggests that the economy of these nations, particularly in terms of industrial activity, persisted during the COVID-19 pandemic. Overall, the lockdowns implemented during COVID-19 suggest that air quality in the Asian Monsoon region can be improved by the reduction of emissions, especially those due to mobility as an indicator of traffic in major cities.

Regulation of nuclear DNA damage response by mitochondrial morphofunctional pathway.

Cells are constantly challenged by genotoxic stresses that can lead to genome instability. The integrity of the nuclear genome is preserved by the DNA damage response (DDR) and repair. Additionally, these stresses can induce mitochondria to transiently hyperfuse; however, it remains unclear whether canonical DDR is linked to these mitochondrial morphological changes. Here, we report that the abolition of mitochondrial fusion causes a substantial defect in the ATM-mediated DDR signaling. This deficiency is overcome by the restoration of mitochondria fusion. In cells with fragmented mitochondria, genotoxic stress-induced activation of JNK and its translocation to DNA lesion are lost. Importantly, the mitochondrial fusion machinery of MFN1/MFN2 associates with Sab (SH3BP5) and JNK, and these interactions are indispensable for the Sab-mediated activation of JNK and the ATM-mediated DDR signaling. Accordingly, the formation of BRCA1 and 53BP1 foci, as well as homology and end-joining repair are impaired in cells with fragmented mitochondria. Together, these data show that mitochondrial fusion-dependent JNK signaling is essential for the DDR, providing vital insight into the integration of nuclear and cytoplasmic stress signals.

Research Priorities of Applying Low-Cost PM2.5 Sensors in Southeast Asian Countries.

The low-cost and easy-to-use nature of rapidly developed PM2.5 sensors provide an opportunity to bring breakthroughs in PM2.5 research to resource-limited countries in Southeast Asia (SEA). This review provides an evaluation of the currently available literature and identifies research priorities in applying low-cost sensors (LCS) in PM2.5 environmental and health research in SEA. The research priority is an outcome of a series of participatory workshops under the umbrella of the International Global Atmospheric Chemistry Project-Monsoon Asia and Oceania Networking Group (IGAC-MANGO). A literature review and research prioritization are conducted with a transdisciplinary perspective of providing useful scientific evidence in assisting authorities in formulating targeted strategies to reduce severe PM2.5 pollution and health risks in this region. The PM2.5 research gaps that could be filled by LCS application are identified in five categories: source evaluation, especially for the distinctive sources in the SEA countries; hot spot investigation; peak exposure assessment; exposure-health evaluation on acute health impacts; and short-term standards. The affordability of LCS, methodology transferability, international collaboration, and stakeholder engagement are keys to success in such transdisciplinary PM2.5 research. Unique contributions to the international science community and challenges with LCS application in PM2.5 research in SEA are also discussed.

Large spatio-temporal variations of size-resolved particulate matter and volatile organic compounds in urban area with heavy traffic.

A monitoring campaign, the first of this kind for a heavy traffic urban area of Vietnam, was conducted which generated nearly 200 daily filter samples of PM2.5, PM10, and black carbon (BC), 1300 online hourly PMx (PM10, PM2.5, and PM1), 900 hourly/bi-hourly BTEX data, 700 h of traffic counts, and online meteorology records. PMx and BTEX levels show large horizontal gradients across this small urban area of 300 m width suggesting that the pollution data should be generated with sufficient spatial resolutions for assessment of the exposure and health effects. This paper focuses on analyzing PMx with reference to the previously published BTEX to provide a more complete picture of the traffic-related pollution in the area. Spatio-temporal variations of pollutants are analyzed in relation to traffic flows and fleet compositions, weekday-weekend effects, local and regional meteorology. PM10 and BTEX levels had larger variations between the sites indicating their stronger associations with the traffic activities than the finer particles. Twenty-four-hour (24 h) PM2.5 levels ranged between 19 and 191 µg/m3 with high PM1/PM2.5 ratios of above 0.8 at ambient site (AA) and above 0.7 at roadsides. Multivariate relationship analysis (PCA) for the bi-hourly datasets of meteorology, traffic flows, and pollutant levels indicated overwhelming influence of on-road traffic fleet compositions on the roadside pollutants levels. At AA, PCA results showed a complex interaction between local emissions, meteorological conditions, and regional/long-range transport. Higher pollution levels were associated with the airmass types having the continental origin and pathways.

Survey-based inventory for atmospheric emissions from residential combustion in Vietnam.

Local questionnaire surveys were conducted to collect representative activity data for calculation of annual emissions from residential combustion in Red River Delta (RRD), Vietnam, for 2010-2015. Multistage statistical sampling was implemented in the surveys for Hanoi Metropolitan Region (HMR) and deep rural area of Ninh Binh province (Con Thoi, Ninh Binh (CTNB)). Emission factors were scrutinized to select relevant ranges and central values for typical cookstoves in RRD. Large differences in the activity data (cooking activities, fuel-stove types, and fuel consumption) were found between three HMR strata (urban, suburban, and rural populations) and CTNB, respectively, which resulted in distinctly different annual emissions per capita. Annual 2010 emissions from residential combustion in RRD were estimated for toxic pollutants, in Gg/year, of 217 for CO, 1.5 NOx, 7.4 SO2, 33 NMVOC, 3.7 NH3, 16.9 PM2.5, 1.4 BC, and 7.1 OC, along with 171 t/year of total PAHs with 0.7 t/year of BaP, and greenhouse gases of 5395 CO2, 17.2 CH4, and 0.7 N2O Gg/year. Emissions increased by 1.5-7.8%, varying with species, over the 6-year period. Prevalent use of crop residue in CTNB induced its dominant shares in the residential combustion emissions not only in this deep rural area but also in the entire RRD domain. Spatial emission distribution exhibited high intensities over districts having high rural population density. Global warming potential results indicated the dominant role of black carbon, especially over the 20-year horizon. Switching from solid fuels to liquefied petroleum gas would reduce the emissions from this sector and bring in multiple benefits.

Analysis of roadside air pollutant concentrations and potential health risk of exposure in Hanoi, Vietnam.

The large number of vehicles plying in roads is the main cause of traffic jam and air pollution in Hanoi. In this study, the vehicle density and shares of different vehicle types, the traffic flow velocity and roadside air pollutants concentrations were monitored in Chua Boc street, a typical arterial road in the city. The shares of the motorcycle, car and bus fleets in the total on-road traffic in the street were 78.4-87.3, 12.3-20.2 and 0.4-1.4%, respectively. The high density of vehicles caused traffic jam during rush hours and considerably reduced the vehicle speed. The traffic flow velocity during non-rush and rush hours was found to vary from 26.4-34.5 and 10.3-12.1 km/h, respectively. The average concentrations of PM10, PM2.5, SO2, NO2, CO and NMVOC during the rush hours were the following: 117.1 ± 8.5, 65.2 ± 10.6, 113.5 ± 10.9, 138.5 ± 16.0, 6792 ± 998 and 451 ± 71 µg/m3, respectively, which were about 1.9-2.6 times above the levels during non-rush hours. The decrease in vehicle speed during rush hours were strongly correlated with the increase in concentration of PM10 (R2 = 0.732), PM2.5 (R2 = 0.685), SO2 (R2 = 0.578), NO2 (R2 = 0.738), CO (R2 = 0.689) and NMVOC (R2 = 0.747). High levels of these toxic air pollutants in Hanoi city posed a high health risk to humans. Facemask use was more popular among the motorcycle commuters and pedestrians, especially during rush hours, than among the people working for extended time period alongside of the street.

Dual targeting of RIG-I and MAVS by MARCH5 mitochondria ubiquitin ligase in innate immunity.

The mitochondrial antiviral signaling (MAVS) protein on the mitochondrial outer membrane acts as a central signaling molecule in the RIG-I-like receptor (RLR) signaling pathway by linking upstream viral RNA recognition to downstream signal activation. We previously reported that mitochondrial E3 ubiquitin ligase, MARCH5, degrades the MAVS protein aggregate and prevents persistent downstream signaling. Since the activated RIG-I oligomer interacts and nucleates the MAVS aggregate, MARCH5 might also target this oligomer. Here, we report that MARCH5 targets and degrades RIG-I, but not its inactive phosphomimetic form (RIG-IS8E). The MARCH5-mediated reduction of RIG-I is restored in the presence of MG132, a proteasome inhibitor. Upon poly(I:C) stimulation, RIG-I forms an oligomer and co-expression of MARCH5 reduces the expression of this oligomer. The RING domain of MARCH5 is necessary for binding to the CARD domain of RIG-I. In an in vivo ubiquitination assay, MARCH5 transfers the Lys 48-linked polyubiquitin to Lys 193 and 203 residues of RIG-I. Thus, dual targeting of active RIG-I and MAVS protein oligomers by MARCH5 is an efficient way to switch-off RLR signaling. We propose that modulation of MARCH5 activity might be beneficial for the treatment of chronic immune diseases.

Mitochondria ubiquitin ligase, MARCH5 resolves hepatitis B virus X protein aggregates in the liver pathogenesis.

Infection of hepatitis B virus (HBV) increase the incidence of chronic liver disease and hepatocellular carcinoma (HCC). The hepatitis B viral x (HBx) protein encoded by the HBV genome contributes to the pathogenesis of HCC and thus, negative regulation of HBx is beneficial for the alleviation of the disease pathogenesis. MARCH5 is a mitochondrial E3 ubiquitin ligase and here, we show that high MARCH5 expression levels are correlated with improved survival in HCC patients. MARCH5 interacts with HBx protein mainly accumulated in mitochondria and targets it for degradation. The N-terminal RING domain of MARCH5 was required for the interaction with HBx, and MARCH5H43W lacking E3 ligase activity failed to reduce HBx protein levels. High expression of HBx results in the formation of protein aggregates in semi-denaturing detergent agarose gels and MARCH5 mediates the elimination of protein aggregates through the proteasome pathway. HBx-induced ROS production, mitophagy, and cyclooxygenase-2 gene expression were suppressed in the presence of high MARCH5 expression. These results suggest MARCH5 as a target for alleviating HBV-mediated liver disease.

Mitochondria elongation is mediated through SIRT1-mediated MFN1 stabilization.

Mitochondria are highly dynamic organelles that change size and morphology by fusing together or dividing through fission. In response to cellular cues, signaling cascades may post-translationally modify mitochondria-shaping proteins, which lead to a change in mitochondria morphology. Here we show that nicotinamide (NAM), an inhibitor of sirtuin deacetylases, promotes degradation of mitochondria fusion protein mitofusin 1 (MFN1), suggesting that acetylation status of MFN1 is important for its protein stability. TIP60 but not PCAF acetyltransferase caused a reduction of MFN1 level. Meanwhile, siRNA-mediated knockdown of SIRT1 deacetylase caused a significant reduction of MFN1 whereas over-expression of SIRT1 increased its level in 293T cells. In vitro acetylation experiments showed that TIP60 increased the acetylation of MFN1 that was abolished by co-existence of SIRT1. Notably, MFN1 and SIRT1 levels were accumulated, along with mitochondria elongation under hypoxic conditions. Thus, the data suggest that mitochondria elongation under hypoxic condition is regulated through SIRT1-mediated MFN1 deacetylation and accumulation. The data provide an insight in the maintenance of cellular homeostasis through mitochondria morphological change.

Assessment of rice yield loss due to exposure to ozone pollution in Southern Vietnam.

The study domain covered the Eastern region of Southern of Vietnam that includes Ho Chi Minh City (HCMC) and five other provinces. Rice production in the domain accounted for 13% of the national total with three crop cycles per year. We assessed ozone (O3) induced rice production loss in the domain for 2010 using simulated hourly surface O3 concentrations (WRF/CAMx; 4km resolution). Simulated O3 was higher in January-February (largely overlaps the first crop) and September-December (third crop), and lower in March-June (second crop). Spatially, O3 was higher in downwind locations of HCMC and were comparable with observed data. Relative yield loss (RYL) was assessed for each crop over the respective growing period (105days) using three metrics: AOT40, M7 and flux-based O3 dose of POD10. Higher RYL was estimated for the downwind of HCMC. Overall, the rice production loss due to O3 exposure in the study domain in 2010 was the highest for the first crop (up to 25,800metrictons), the second highest for the third crop (up to 21,500tons) and the least for the second crop (up to 6800tons). The low RYL obtained for the second crop by POD10 may be due to the use of a high threshold value (Y=10nmolm(-2)s(-1)). Linear regression between non-null radiation POD0 and POD10 had similar slopes for the first and third crop when POD0 was higher and very low slope for the second crop when POD0 was low. The results of this study can be used for the rice crop planning to avoid the period of potential high RYL due to O3 exposure.

Photodegradation of dioxin in contaminated soil in the presence of solvents and nanoscale TiO2 particles.

Decomposition of 2,3,7,8-Tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) present in soil under ultraviolet (UV) illumination (350-400nm) was investigated using a combination of nontoxic solvents mixed in soil and nanoscale anatase TiO2 (nTiO2) distributed on 2mm top soil surface. Three types of UV-exposure experiments were conducted: intermittent exposure (8 h/day) for 90 days and 120 days, sequential intermittent (120 days) and continuous (24 h/day) for the next 55 days, and continuous exposure for 55 days. The influence of several factors on dioxin photodegradation efficiency was investigated, including the UV absorption by the targeted dioxin, presence of catalytic nTiO2 on soil surface, solvent evaporation rate, as well as vertical gradients of solvents added into the soil columns. Results of dioxin analysis for the soil samples collected at the end of every experiment condition show that the photodegradation enhanced by the nTiO2 presence on the soil surface considerably increased the dioxin removal. Higher removal efficiencies were found for treatments with 15%wt of nTiO2 mixed in the 2-mm surface soil as compared to the 5%wt nTiO2 treatments. The highest removal efficiency (79.6%) was for the sequential intermittent-continuous UV-exposure experiment with nTiO2. Dechlorinated products of 2,3,7,8-TCDD were generally not detected which suggests degradation of targeted dioxin by C-Cl cleavage was negligible. Further modifications to improve removal efficiencies were proposed. Large-scale engineered systems may employ this integrated treatment approach which can also incorporate the reuse of the top soil containing nTiO2 and solvent vapours. With the utilization of natural sunlight such systems would be promisingly suitable for tropical conditions.

Emission of dioxins/furans and other U-POPs from test burns of non-POP pesticides in a hazardous waste incinerator.

This paper presents the results of test burns for obsolete pesticides (OPs) of the permethrin group in a high temperature incinerator (HTI) in Southeast Asia. Three test burn runs were conducted, a baseline run when no OP was fed to the incinerator, and two test runs with different mixtures of OP compounds (formula 1 and 2, refer to Table 1 for detail) containing chlorine in the feeding wastes. The unintentional formed persistent organic pollutants (U-POPs) including 17 dioxins/furans, 12 dioxin-like PCBs and 12 chlorobenzenes (CBs) were monitored in all input materials and all discharges (flue gas, scrubbing liquid and solid residues). The results show relatively high levels of the U-POPs in the flue gas emission with total dioxins/furans of 4.4, 3.4, and 8.4 ng I-TEQ/m(3) in the baseline, test run 1 and test run 2, respectively, which are above international acceptable emission levels. The PCB levels in flue gas were, respectively, 0.01, 0.3 and 0.4 ng I-TEQ/m(3). The baseline thus had similar U-POPs levels with the OP test runs. In stack emission, approximately 90% of the U-POPs and 100% of CBs were present in gas phase. The emission factors, mass of pollutants per metric ton (tonne) of input waste, of U-POPs associated with fly ash (from bag house) were the highest, followed by flue gas and bottom ash while those associated with scrubbing liquid were relatively low. Among the waste input material only the black toner power contained U-POPs, but at low levels. The profiles of the dioxins/furans and PCBs in the toner waste were significantly different from that in the discharges. Despite the overall good destruction and removal efficiency of permethrin (better than 90%) the high emission of U-POPs and CBs from the test burn is of another more serious concern. To our best knowledge the findings of this study are the first of this kind for the Southeast Asia. The findings emphasize that if not properly conducted a standard destruction technology of a non-POP chemical can lead to a release of a range of more dangerous U-POPs into the environment.

CHARACTERIZATION OF PARTICULATE MATTER EMISSION FROM OPEN BURNING OF RICE STRAW.

Emission from field burning of crop residue, a common practice in many parts of the world today, has potential effects on air quality, atmosphere and climate. This study provides a comprehensive size and compositional characterization of particulate matter (PM) emission from rice straw (RS) burning using both in situ experiments (11 spread field burning) and laboratory hood experiments (3 pile and 6 spread burning) that were conducted during 2003-2006 in Thailand. The carbon balance and emission ratio method was used to determine PM emission factors (EF) in the field experiments. The obtained EFs varied from field to hood experiments reflecting multiple factors affecting combustion and emission. In the hood experiments, EFs were found to be depending on the burning types (spread or pile), moisture content and the combustion efficiency. In addition, in the field experiments, burning rate and EF were also influenced by weather conditions, i.e. wind. Hood pile burning produced significantly higher EF (20±8 g kg(-1) RS) than hood spread burning (4.7±2.2 g kg(-1) RS). The majority of PM emitted from the field burning was PM(2.5) with EF of 5.1±0.7 g m(-2) or 8.3±2.7 g kg(-1) RS burned. The coarse PM fraction (PM(10-2.5)) was mainly generated by fire attention activities and was relatively small, hence the resulting EF of PM(10) (9.4±3.5 g kg(-1) RS) was not significantly higher than PM(2.5). PM size distribution was measured across 8 size ranges (from <0.4 µm to >9.0 µm). The largest fractions of PM, EC and OC were associated with PM(1.1). The most significant components in PM(2.5) and PM(10) include OC, water soluble ions and levoglucosan. Relative abundance of some methoxyphenols (e.g., acetylsyringone), PAHs (e.g., fluoranthene and pyrene), organochlorine pesticides and PCBs may also serve as additional signatures for the PM emission. Presence of these toxic compounds in PM of burning smoke increases the potential toxic effects of the emission. For illustration, an estimation of the annual RS field burning in Thailand was made using the obtained in situ field burning EFs and preliminary burning activity data.

Indoor pesticide application practices and levels in homes of Bangkok Metropolitan Region.

This study investigated the indoor application practices of pesticides in different homes located in urban, suburban, and rural areas of the Bangkok Metropolitan Region (BMR). A multi-stage stratified-judgmental sampling was applied to select 280 representative households in BMR for an in-depth questionnaire survey. We found about 71% of these households having mosquitoes as their main indoor nuisance. An inventory on the types and active ingredients was obtained through a shop-shelf survey. Among 22 available commercial products, 12 different active ingredients were observed with the pyrethroid containing pesticides are the most common. The stepwise regression analysis was conducted to reveal the statistical association between indoor levels of total pyrethriods (in the air and on the floor surface of homes) and the household application practices such as the overlap time period since the last application, application and storage locations, and frequency of applications, for instances.

Air pollution modeling at road sides using the operational street pollution model--a case study in Hanoi, Vietnam.

In many metropolitan areas, traffic is the main source of air pollution. The high concentrations of pollutants in streets have the potential to affect human health. Therefore, estimation of air pollution at the street level is required for health impact assessment. This task has been carried out in many developed countries by a combination of air quality measurements and modeling. This study focuses on how to apply a dispersion model to cities in the developing world, where model input data and data from air quality monitoring stations are limited or of varying quality. This research uses the operational street pollution model (OSPM) developed by the National Environmental Research Institute in Denmark for a case study in Hanoi, the capital of Vietnam. OSPM predictions from five streets were evaluated against air pollution measurements of nitrogen oxides (NO(x)), sulfur dioxide (SO2), carbon monoxide (CO), and benzene (BNZ) that were available from previous studies. Hourly measurements and passive sample measurements collected over 3-week periods were compared with model outputs, applying emission factors from previous studies. In addition, so-called "backward calculations" were performed to adapt the emission factors for Hanoi conditions. The average fleet emission factors estimated can be used for emission calculations at other streets in Hanoi and in other locations in Southeast Asia with similar vehicle types. This study also emphasizes the need to further eliminate uncertainties in input data for the street-scale air pollution modeling in Vietnam, namely by providing reliable emission factors and hourly air pollution measurements of high quality.

Lead distribution and its potential risk to the environment: lesson learned from environmental monitoring of abandon mine.

There are many abandon and existing mines (tin, lead and zinc) in the mountainous areas of Thailand. Toxic elements including heavy metals such as lead (Pb), cadmium (Cd) and arsenic (As) have been released and transported from the mining sites to the adjacent landscape. In Thong Pha Phum District, Kanchanaburi Province, Thailand Pb contamination in the vicinity of the mine has occurred which could lead to potential health problems in downstream communities. To better understand current status of Pb contamination and accumulation in the surrounding environment and potential health impact, surface sediment, soil and plant samples were collected seasonally from representative monitoring sites along the aquatic track or flow regime. Potential health risk was determined using hazard quotient (HQ) as an index for local inhabitants who consume rice. Environmental monitoring illustrated that Pb concentrations in the surface sediment was as high as 869.4 mg kg(-1) dry weight and varied differently among stations sampled. Lead content in agricultural soil ranged between 137.8 to 613.5 mg kg(-1) dry weight and was inversely proportion to the distance from the point source. Moreover Pb was transported from the point source to down hill areas. At the highly polluted monitoring stations (S1, S2, and S3), concentrations of Pb exceeded the maximum allowable concentration for Pb in agricultural soil (300 mg kg(-1)) by 1.7-2 times. The Pb in soil was primarily associated with Fe/Mn oxides bound fraction (46-56%) followed by the organic bound fraction (25-30%). Lead uptake by plant varied and was species dependent. However root and tuber crops like cassava (19.92 mg Pb kg(-1) dry weight) and curcumin (3.25 mg Pb kg(-1) dry weight) could have removed Pb from the soil which suggest growing root crops in Pb contaminated soils should be avoided. However Cd, a co-contaminant at one of monitored stations (S4) yielded rice grain with Cd exceeding the maximum allowable concentration suggesting some potential health risk (HQ = 5.34) if people consume rice grown at this station. Overall result shows a low risk associated with Pb release into the environment.

Integrated assessment of brick kiln emission impacts on air quality.

This paper presents monitoring results of daily brick kiln stack emission and the derived emission factors. Emission of individual air pollutant varied significantly during a firing batch (7 days) and between kilns. Average emission factors per 1,000 bricks were 6.35-12.3 kg of CO, 0.52-5.9 kg of SO(2) and 0.64-1.4 kg of particulate matter (PM). PM emission size distribution in the stack plume was determined using a modified cascade impactor. Obtained emission factors and PM size distribution data were used in simulation study using the Industrial Source Complex Short-Term (ISCST3) dispersion model. The model performance was successfully evaluated for the local conditions using the simultaneous ambient monitoring data in 2006 and 2007. SO(2) was the most critical pollutant, exceeding the hourly National Ambient Air Quality Standards over 63 km(2) out of the 100-km(2) modelled domain in the base case. Impacts of different emission scenarios on the ambient air quality (SO(2), PM, CO, PM dry deposition flux) were assessed.

Climate-relevant properties of diesel particulate emissions: results from a piggyback study in Bangkok, Thailand.

A "piggyback" approach is used to characterize aerosol emissions to obtain input for large-scale models of atmospheric transport. Particulate and gaseous emissions from diesel trucks, light-duty vehicles, and buses were measured by the Bangkok Pollution Control Department as part of the Developing Integrated Emissions Strategies for Existing Land Transport (DIESEL) project. We added filter-based measurements of carbonaceous composition, particulate light absorption, and water uptake. For 88 "normal" diesel vehicles (PM emission rate < 4.7 g/kg), our best estimate of the average PM2.5 emission rate is 2.2 +/- 0.5 g/kg, whereas for 15 high emitters, it is 8.4 +/- 1.9 g/kg. The effect of Euro standards on PM emission rates was apparent for heavy-duty vehicles, but not for light-duty vehicles. Carbonaceous composition appears relatively consistent, with particulate (artifact-corrected) OC at 17 +/- 1% and EC at 40 +/- 8% of PM for 103 pickups, vans, heavy-duty trucks and buses. The median absorption cross-section for EC is 10.5 m2/g at 532 nm. The history of average emission rate and chemical composition during the project suggests that about 25 vehicles can provide a regional PM emission rate for normal vehicles. Other studies such as remote sensing measurements will be required to estimate the important contribution of high-emitting vehicles.

Assessment of ozone effects on local rice cultivar by portable ozone fumigation system in Hanoi, Vietnam.

This study examined the effects of troposphere ozone (O3) on rice by developing a portable ozone fumigation system and applied to the field in Hanoi, Vietnam. The system was nearly identical to the open top chamber but designed to easily and cheaply assess the O3 sensitivity of local agricultural crops in the actual field. The rice (Oryza sativa L.) was exposed to ozone during the flowering stage at peri-urban experimental site of Hanoi. The fumigation protocols covered five different levels, namely; non-filtered air (ambient) as the control treatment, 32, 62, 85 and 113 ppb in 7-h mean. It was found that observed impacts corresponded well to similar open-top chamber studies in other Asian countries. The methodology and the system left a large room for improvement and called for very careful interpretation and pre-conditions (e.g. low ambient O3 concentration). However, the portable O3 exposure in the field might open a door to the less developed countries to implement the phytotoxic risk assessment of the local agricultural species.

Levels of pesticides and polychlorinated biphenyls in selected homes in the Bangkok metropolitan region, Thailand.

Past uses of hazardous chemicals in Thailand for agricultural and household purposes have resulted in their ubiquity in the environment. This study aims to characterize the levels of 41 target chemicals, including 25 organochlorine pesticides (OCP), of which 17 are persistent organic pollutant (POP) pesticides, 7 pyrethroids, and 9 polychlorinated biphenyls (PCBs) in 8 homes in the Bangkok Metropolitan Region (BMR). The study is the first of these types for Thailand, and was conducted during the dry season of 2006-2007. Samples were collected at three areas of the BMR, including urban, suburban, and rural for indoor and outdoor (I/O) air, as well as from deposits on floor surfaces. Airborne samples were taken over 24 h for both the gaseous and particulate matter phases and analyzed separately by GC-ECD following the U.S. EPA TO-10A method. Overall 35 out of 41 compounds were detected in the samples. The compounds were mostly detected and at higher levels in the gas phase, except for a few less volatile compounds, such as pyrethroids or DDT. Indoor air concentrations are higher than the outdoor levels for most chemicals; hence, the I/O ratios are mostly above 1.0, especially for rural homes. Among the OCPs, heptachlor was found at the highest concentrations for urban homes (5.2 +/- 3.1 ng/m(3) indoor and 2.6 +/- 0.4 ng/m(3) outdoor). PCB profiles were dominated by the lighter congeners, with the highest levels found for PCB31 (10.4 indoors in urban homes (ng/m(3))). Suspended matters were found to be high indoors in the rural homes, which may be linked to high-strength of indoor sources.