RESUMO
Introducing functionality onto PE surfaces is a longstanding challenge in polymer science, driven by the need for polymer materials with improved adhesion and antifouling properties. Herein, we report surface-initiated hydrogen atom transfer-reversible addition-fragmentation chain transfer (SI HAT-RAFT) as a robust method to grow high-density brush polymers from PE surfaces. We demonstrate that, under mild conditions, direct initiation from the C-H bonds of PE surfaces allows for the graft polymerization of a variety of (meth)acrylate monomers. The resulting polymer brushes reached several hundred nanometers in thickness with densities of ca. 0.62 chains/nm2, compared to the current standard of â¼0.28 chains/nm2. Finally, we show that our method is capable of dramatically improving the adhesive properties of PE surfaces. This work enables the preparation of PE with diverse surface functionalities for potential use in biomedical, industrial, and battery applications.
RESUMO
Biofouling on marine surfaces causes immense material and financial harm for maritime vessels and related marine industries. Previous reports have shown the effectiveness of amphiphilic coating systems based on poly(dimethylsiloxane) (PDMS) against such marine foulers. Recent studies on biofouling mechanisms have also demonstrated acidic microenvironments in biofilms and stronger adhesion at low-pH conditions. This report presents the design and utilization of amphiphilic polymer coatings with buffer functionalities as an active disruptor against four different marine foulers. Specifically, this study explores both neutral and zwitterionic buffer systems for marine coatings, offering insights into coating design. Overall, these buffer systems were found to improve foulant removal, and unexpectedly were the most effective against the diatom Navicula incerta.
Assuntos
Biofilmes , Incrustação Biológica , Diatomáceas , Dimetilpolisiloxanos , Incrustação Biológica/prevenção & controle , Diatomáceas/fisiologia , Dimetilpolisiloxanos/química , Animais , Soluções Tampão , Propriedades de Superfície , Concentração de Íons de HidrogênioRESUMO
Polydimethylsiloxane (PDMS) has been widely used as a surface coating material, which has been reported to possess dynamic omniphobicity to a wide range of both polar and nonpolar solvents due to its high segmental flexibility and mobility. However, such high flexibility and mobility also enable penetration of small molecules into PDMS coatings, which alter the chemical and physical properties of the coating layers. To improve the anti-penetration properties of PDMS, a series of fluorinated alkyl segments are grafted to a diblock copolymer of polystyrene-block-poly(vinyl methyl siloxane) (PS-b-PVMS) using thiol-ene click reactions. This article reports the chemical characterization of these model fluorosilicone block copolymers and uses fluorescence measurements to investigate the dye penetration characteristics of polymer thin films. The introduction of longer fluorinated alkyl chains can gradually increase the anti-penetration properties as the time to reach the maximum fluorescence intensity (tpeak) gradually increases from 11 s of PS-b-PVMS to more than 1000 s of PS-b-P(n-C6F13-VMS). The improvement of anti-penetration properties is attributed to stronger inter-/intrachain interactions, phase segregation of ordered fluorinated side chains, and enhanced hydrophobicity caused by the grafting of fluorinated alkyl chains.
RESUMO
Polymeric zwitterions exhibit exceptional fouling resistance through the formation of a strongly hydrated surface of immobilized water molecules. While being extensively tested for their performance in biomedical, membrane, and, to a lesser extent, marine environments, few studies have investigated how the molecular design of the zwitterion may enhance its performance. Furthermore, while theories of zwitterion antifouling mechanisms exist for molecular-scale foulant species (e.g., proteins and small molecules), it remains unclear how molecular-scale mechanisms influence the micro- and macroscopic interactions of relevance for marine applications. The present study addresses these gaps through the use of a modular zwitterion chemistry platform, which is characterized by a combination of surface-sensitive sum frequency generation (SFG) vibrational spectroscopy and marine assays. Zwitterions with increasingly delocalized cations demonstrate improved fouling resistance against the green alga Ulva linza. SFG spectra correlate well with the assay results, suggesting that the more diffuse charges exhibit greater surface hydration with more bound water molecules. Hence, the number of bound interfacial water molecules appears to be more influential in determining the marine antifouling activities of zwitterionic polymers than the binding strength of individual water molecules at the interface.
RESUMO
Nanochannels with controllable gating behavior are attractive features in a wide range of nanofluidic applications including viral detection, particle sorting, and flow regulation. Here, we use selective sidewall functionalization of nanochannels with a polyelectrolyte brush to investigate the channel gating response to variations in solution pH and ionic strength. The conformational and structural changes of the interfacial brush layer within the channels are interrogated by specular and off-specular neutron reflectometry. Simultaneous fits of the specular and off-specular signals, using a dynamical theory model and a fitting optimization protocol, enable detailed characterization of the brush conformations and corresponding channel geometry under different solution conditions. Our results indicate a collapsed brush state under basic pH, equivalent to an open gate, and an expanded brush state representing a partially closed gate upon decreasing the pH and salt concentration. These findings open new possibilities in noninvasive in situ characterization of tunable nanofluidics and lab-on-chip devices with advanced designs and improved functionality.
RESUMO
Understanding how small molecules penetrate and contaminate polymer films is of vital importance for developing protective coatings for a wide range of applications. To this end, rhodamine B fluorescent dye is visualized diffusing through polystyrene-polydimethylsiloxane block copolymer (BCP) coatings using confocal microscopy. The intensity of dye inside the coatings grows and decays non-monotonically, which is likely due to a combination of dye molecule transport occurring concurrently in different directions. An empirical fitting equation allows for comparing the contamination rates between copolymers, demonstrating that dye penetration is related to the chemical makeup and configuration of the BCPs. This work shows that confocal microscopy can be a useful tool to visualize the transport of a fluorophore in space and time through a coating.
Assuntos
Corantes Fluorescentes , Polímeros , Polímeros/química , Corantes Fluorescentes/química , PoliestirenosRESUMO
Two types of amphiphilic random terpolymers, poly(ethylene glycol methyl ether methacrylate)-ran-poly(2,2,6,6-tetramethylpiperidinyloxy methacrylate)-ran-poly(polydimethyl siloxane methacrylate) (PEGMEMA-r-PTMA-r-PDMSMA), were synthesized and evaluated for antifouling (AF) and fouling-release (FR) properties using diverse marine fouling organisms. In the first stage of production, the two respective precursor amine terpolymers containing (2,2,6,6-tetramethyl-4-piperidyl methacrylate) units (PEGMEMA-r-PTMPM-r-PDMSMA) were synthesized by atom transfer radical polymerization using various comonomer ratios and two initiators: alkyl halide and fluoroalkyl halide. In the second stage, these were selectively oxidized to introduce nitroxide radical functionalities. Finally, the terpolymers were incorporated into a PDMS host matrix to create coatings. AF and FR properties were examined using the alga Ulva linza, the barnacle Balanus improvisus, and the tubeworm Ficopomatus enigmaticus. The effects of comonomer ratios on surface properties and fouling assay results for each set of coatings are discussed in detail. There were marked differences in the effectiveness of these systems against the different fouling organisms. The terpolymers had distinct advantages over monopolymeric systems across the different organisms, and the nonfluorinated PEG and nitroxide combination was identified as the most effective formulation against B. improvisus and F. enigmaticus.
RESUMO
Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains 2,5-bis(thien-2-yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ion-conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscopy, temperature-dependent wide-angle X-ray scattering, and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion-conducting salt lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li+]/[EO] = 0.1. The highest ionic conductivity of 8 × 10-3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly of ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.
RESUMO
The resolution, line edge roughness, and sensitivity (RLS) trade-off has fundamentally limited the lithographic performance of chemically amplified resists. Production of next-generation transistors using extreme ultraviolet (EUV) lithography depends on a solution to this problem. A resist that simultaneously increases the effective reaction radius of its photogenerated acids while limiting their diffusion radius should provide an elegant solution to the RLS barrier. Here, we describe a generalized synthetic approach to phthalaldehyde derivatives using sulfur(VI) fluoride exchange click chemistry that dramatically expands usable chemical space by enabling virtually any non-ionic photoacid generator (PAG) to be tethered to phthalaldehyde. The resulting polymers represent the first ever PAG-tethered self-immolative resists in an architecture that simultaneously displays high contrast, extraordinary sensitivity, and low roughness under EUV exposure. We believe this class of resists will ultimately enable researchers to overcome the RLS trade-off.
Assuntos
Fluoretos , Polímeros , Polímeros/química , Ácidos/química , Difusão , EnxofreRESUMO
Conventional chemically amplified resists (CARs) rely on the usage of photoacid generators to serve as the source of chemical amplification. However, acid diffusion inevitably accompanies CARs and has led to the resolution, line edge roughness, and sensitivity (RLS) trade-off, which is the most challenging technical problem for modern photoresists. Herein, we take advantage of the self-immolative property of polyphthalaldehyde (PPA) derivatives to create end-cap enabled chain scissionable resists for extreme ultraviolet (EUV) lithography. The feasibility of this strategy was demonstrated under UV photodegradation experiments. The dose-to-clear (DTC) under EUV radiation was 90 mJ/cm2 for the most promising resist, representing more than a 100-fold improvement over previous PPA resists. Density functional theory (DFT) calculations were conducted to understand the structural origin of end-cap EUV sensitivity.
Assuntos
Impressão , Raios Ultravioleta , Ácidos/química , Difusão , FotóliseRESUMO
Biofouling is a major disruptive process affecting the fuel efficiency and durability of maritime vessel coatings. Previous research has shown that amphiphilic coatings consisting of a siloxane backbone functionalized with hydrophilic moieties are effective marine antifouling and fouling-release materials. Poly(ethylene glycol) (PEG) has been the primary hydrophilic component used in such systems. Recently, the morpholine group has emerged as a promising compact alternative in antifouling membranes but is yet to be studied against marine foulants. In this work, the use of morpholine moieties to generate amphiphilicity in a poly(dimethylsiloxane) (PDMS)-based antifouling and fouling-release coating was explored. Two separate coating sets were investigated. The first set examined the incorporation of an N-substituted morpholine amine, and while these coatings showed promising fouling-release properties for Ulva linza, they had unusually high settlement of spores compared to controls. Based on those results, a second set of materials was synthesized using an N-substituted morpholine amide to probe the source of the high settlement and was found to significantly improve antifouling performance. Both coating sets included PEG controls with varying lengths to compare the viability of the morpholine structures as alternative hydrophilic groups. Surfaces were evaluated through a combination of bubble contact angle goniometry, profilometry, X-ray photoelectron spectroscopy (XPS), and marine bioassays against two soft fouling species, U. linza and Navicula incerta, known to have different adhesion characteristics.
Assuntos
Incrustação Biológica , Diatomáceas , Ulva , Incrustação Biológica/prevenção & controle , Morfolinas , Polietilenoglicóis/química , Propriedades de SuperfícieRESUMO
Polymers are commonly used in applications that require long-term exposure to water and aqueous mixtures, serving as water purification membranes, marine antifouling coatings, and medical implants, among many other applications. Because polymer surfaces restructure in response to the surrounding environment, in situ characterization is crucial for providing an accurate understanding of the surface chemistry under conditions of use. To investigate the effects of surface-active side chains on polymer surface chemistry and resultant interactions with interfacial water (i.e., water sorption), we present synchrotron ambient pressure X-ray photoelectron spectroscopy (APXPS) studies performed on poly(ethylene oxide) (PEO)- and poly(dimethylsiloxane) (PDMS)-based polymer surfaces modified with amphiphilic polypeptoid side chains, previously demonstrated to be efficacious in marine fouling prevention and removal. The polymer backbone and environmental conditions were found to affect polypeptoid surface presentation: due to the surface segregation of its fluorinated polypeptoid monomers under vacuum, the PEO-peptoid copolymer showed significant polypeptoid content in both vacuum and hydrated conditions, while the modified PDMS-based copolymer showed increased polypeptoid content only in hydrated conditions due to the hydrophilicity of the ether monomers and polypeptoid backbone. Polypeptoids were found to bind approximately 2.8 water molecules per monomer unit in both copolymers, and the PEO-peptoid surface showed substantial water sorption that suggests a surface with a more diffuse water/polymer interface. This work implies that side chains are ideal for tuning water affinity without altering the base polymer composition, provided that surface-driving groups are present to ensure activity at the interface. These types of systematic modifications will generate novel polymers that maximize bound interfacial water and can deliver surface-active groups to the surface to improve the effectiveness of polymer materials.
RESUMO
Polymer-grafted nanoparticles (PGNs) receive great attention because they possess the advantages of both the grafted polymer and inorganic cores, and thus demonstrate superior optical, electronic, and mechanical properties. Thus, PGNs with tailorable interparticle interactions are indispensable for the formation of a superlattice with a defined and ordered structure. In this work, the synthesis of PGNs is reported which can form interparticle hydrogen-bonding to enhance the formation of well-defined 2D nanoparticle arrays. Various polymers, including poly(4-vinyl pyridine) (P4VP), poly(dimethyl aminoethyl acrylate) (PDMAEMA), and poly(4-acetoxy styrene) (PAcS), are attached to silica cores by a "grafting from" in a mini emulsion-like synthesis approach. SiO2 -PAcS brushes are deprotected by hydrazinolysis and converted into poly(4-vinyl phenol) (PVP), containing hydroxyl groups as potential hydrogen-bonding donor sites. Understanding and controlling interparticle interactions by varying grafting density in the range of 10-2 -10-3 chain nm-2 , and the formation of interparticle hydrogen bonding relevant for self-assembly of PGNs and potential formation of PGN superlattice structures are the motivations for this study.
Assuntos
Nanopartículas , Polímeros , Hidrogênio , Ligação de Hidrogênio , Nanopartículas/química , Polímeros/química , Dióxido de Silício/química , Propriedades de SuperfícieRESUMO
The buildup of organic matter and organisms on surfaces exposed to marine environments, known as biofouling, is a disruptive and costly process affecting maritime operations. Previous research has identified some of the surface characteristics particularly suited to the creation of antifouling and fouling-release surfaces, but there remains room for improvement against both macrofouling and microfouling organisms. Characterization of their adhesives has shown that many rely on oxidative chemistries. In this work, we explore the incorporation of the stable radical 2,2,6,6-tetramethylpipiderin-1-oxyl (TEMPO) as a component in an amphiphilic block copolymer system to act as an inhibitor for marine cements, disrupting adhesion of macrofouling organisms. Using polystyrene-b-poly(dimethylsiloxane-r-vinylmethysiloxane) block copolymers, pendent vinyl groups were functionalized with TEMPO and poly(ethylene glycol) to construct an amphiphilic material with redox active character. The antifouling and fouling-release performance of these materials was investigated through settlement and removal assays of three model fouling organisms and correlated to surface structure and chemistry. Surfaces showed significant antifouling character and fouling-release performance was increased substantially toward barnacles by the incorporation of stable radicals, indicating their potential for marine antifouling applications.
Assuntos
Incrustação Biológica/prevenção & controle , Óxidos N-Cíclicos/química , Poliestirenos/química , Silicones/química , Animais , Óxidos N-Cíclicos/síntese química , Diatomáceas/fisiologia , Poliestirenos/síntese química , Silicones/síntese química , Thoracica/fisiologia , Ulva/fisiologia , MolhabilidadeRESUMO
In this study of nanopatterned helical poly(benzyl-l-glutamate) (PBLG) brushes, rod-type brush arrays were fabricated via an integrated process of high-resolution lithography and surface-initiated vapor deposition polymerization (SI-VDP). "Nanospikes" of polymer brushes with spacings of less than 100 nm were produced. The topology and areal behavior of the resulting patterned rod-like brushes were analyzed and compared with patterned coil-type brushes. A geometric study of these self-assembled "nanospikes" was carried out, and their cross sections were investigated via focused ion beam (FIB) and scanning electron microscopy (SEM). Furthermore, the presence of poly(N-isopropylacrylamide) (PNIPAM) brushes in unpatterned regions was shown to inhibit undesired "inter-spike" bridging of the PBLG brushes, resulting in more well-defined nanostructures. It was shown that rod-like polypeptide brushes are capable of self-segregation and become arranged vertically without any external support from their surroundings, to form a rod bundle end-point functional topography that could provide possible pathways for studies of model biological surfaces, directed assembly of nanoparticles, or binary mixed brush surfaces with dual properties.
Assuntos
Elétrons , Nanoestruturas , Nanoestruturas/química , Peptídeos/química , Polimerização , Polímeros/químicaRESUMO
This work represents a joint computational and experimental study on a series of n-ethylene glycol (PEOn)-terminated quaterthiophene (4T) oligomers for 1 < n < 10 to elucidate their self-assembly behavior into a smectic-like lamellar phase. This study builds on an earlier study for n = 4 that showed that our model predictions were consistent with experimental data on the melting behavior and structure of the lamellar phase, with the latter consisting of crystal-like 4T domains and liquid-like PEO4 domains. The present study aims to understand how the length of the terminal PEOn chains modulates the disordering temperature of the lamellar phase and hence the relative stability of the ordered structure. A simplified bilayer model, where the 4T domains are not explicitly described, is put forward to efficiently estimate the disordering effect of the PEO domains with increasing n; this method is first validated by correctly predicting that layers of alkyl (PE)-capped 4T oligomers (for 1 < n < 10) stay ordered at room temperature. Both 4T-domain implicit and explicit model simulations reveal that the order-disorder temperature decreases with the length of the PEO capping chains, as the associated increase in conformational entropy drives a tendency toward disorder that overtakes the cohesive energy, keeping the ordered packing of the 4T domains.
RESUMO
Macromolecular radicals are receiving growing interest as functional materials in energy storage devices and in electronics. With the need for enhanced conductivity, researchers have turned to macromolecular radicals bearing conjugated backbones, but results thus far have yielded conjugated radical polymers that are inferior in comparison to their non-conjugated partners. The emerging explanation is that the radical unit and the conjugated backbone (both being redox active) transfer electrons between each other, essentially "quenching" conductivity or capacity. Here, the internal charge transfer process is quantified using a polythiophene loaded with 0, 25, or 100% nitroxide radicals (2,2,6,6-tetramethyl-1-piperidinyloxy [TEMPO]). Importantly, deconvolution of the cyclic voltammograms shows mixed faradaic and non-faradaic contributions that contribute to the internal charge transfer process. Further, mixed ion-electron transfer is determined for the 100% TEMPO-loaded conjugated radical polymer, from which it is estimated that one triflate anion and one propylene carbone molecule are exchanged for every electron. Although these findings indicate the reason behind their poor conductivity and capacity, they point to how these materials might be used as voltage regulators in the future.
RESUMO
We report a facile synthetic approach to create stable radical block copolymers containing a secondary fluorinated block via anionic polymerization using a bulky, sterically hindered countercation composed of a sodium ion and di-benzo-18-crown-6 complex. The synthetic conditions described in this report allowed for controlled molecular weights and dispersity (<1.3) of both homopolymers: poly(2,2,6,6-tetramethyl-1-piperidinyloxy-methacrylate) (PTMA) and poly(2,2,2-trifluoroethyl methacrylate) (PTFEMA) as well as their block copolymers (PTMA-b-PTFEMA). The stable radical concentration of the polymers was determined by electron spin resonance (ESR) and showed radical content above 70%. An analysis of the microphase morphologies in PTMA-b-PTFEMA thin films via atomic force microscopy (AFM) and grazing incidence small angle X-ray scattering (GISAXS) showed clear evidence of long-range ordering of lamellar and cylindrical morphologies with 32 and 36 nm spacing, respectively. The long-range ordering of the morphologies was developed with the aid of two separate neutral layers: PTMA-ran-PTFEMA-ran-poly(hydroxyl ethyl methacrylate) (PHEMA) and poly(isobutyl methacrylate) (PiBMA)-ran-PTFEMA-ran-PHEMA, which helped us corroborate, along with the Zisman method, the surface energy estimation of PTMA to be 30.1 mJ/m2.
RESUMO
In marine industries, the accumulation of organic matter and marine organisms on ship hulls and instruments limits performance, requiring frequent maintenance and increasing fuel costs. Current coatings technology to combat this biofouling relies heavily on the use of toxic, biocide-containing paints. These pose a serious threat to marine ecosystems, affecting both target and nontarget organisms. Innovation in the design of polymers offers an excellent platform for the development of alternatives, but the creation of a broad-spectrum, nontoxic material still poses quite a hurdle for researchers. Surface chemistry, physical properties, durability, and attachment scheme have been shown to play a vital role in the construction of a successful coating. This review explores why these characteristics are important and how recent research accounts for them in the design and synthesis of new environmentally benign antifouling and fouling release materials.
Assuntos
Organismos Aquáticos/fisiologia , Incrustação Biológica/prevenção & controle , Polímeros/química , Ecossistema , Lubrificantes/química , Polímeros/síntese química , Propriedades de SuperfícieRESUMO
Developing soft materials with both ion and electron transport functionalities is of broad interest for energy-storage and bioelectronics applications. Rational design of these materials requires a fundamental understanding of interactions between ion and electron conducting blocks along with the correlation between the microstructure and the conduction characteristics. Here, we investigate the structure and mixed ionic/electronic conduction in thin films of a liquid crystal (LC) 4T/PEO4, which consists of an electronically conducting quarterthiophene (4T) block terminated at both ends by ionically conducting oligoethylenoxide (PEO4) blocks. Using a combined experimental and simulation approach, 4T/PEO4 is shown to self-assemble into smectic, ordered, or disordered phases upon blending the materials with the ionic dopant bis(trifluoromethane)sulfonimide lithium (LiTFSI) under different LiTFSI concentrations. Interestingly, at intermediate LiTFSI concentration, ordered 4T/PEO4 exhibits an electronic conductivity as high as 3.1 × 10-3 S/cm upon being infiltrated with vapor of the 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ) molecular dopant while still maintaining its ionic conducting functionality. This electronic conductivity is superior by an order of magnitude to the previously reported electronic conductivity of vapor co-deposited 4T/F4TCNQ blends. Our findings demonstrate that structure and electronic transport in mixed conduction materials could be modulated by the presence of the ion transporting component and will have important implications for other more complex mixed ionic/electronic conductors.