RESUMO
In this mini-review, we present our concepts for designing multicomponent reactions with reference to a series of sequential radical reactions that we have developed. Radical reactions are well suited for the design of multicomponent reactions due to their high functional group tolerance and low solvent sensitivity. We have focused on the photolysis of interelement compounds with a heteroatom-heteroatom single bond, which readily generates heteroatom-centered radicals, and have studied the photoinduced radical addition of interelement compounds to unsaturated compounds. First, the background of multicomponent radical reactions is described, and basic concepts and methodology for the construction of multicomponent reactions are explained. Next, examples of multicomponent reactions involving two interelement compounds and one unsaturated compound are presented, as well as examples of multicomponent reactions involving one interelement compound and two unsaturated compounds. Furthermore, multicomponent reactions involving intramolecular cyclization processes are described.
RESUMO
The addition of heteroatom compounds to alkynes and alkenes is an atom-efficient method of carbon-heteroatom bond formation and is widely used as a fundamental synthetic method for the construction of functional molecules. Nevertheless, examples of transition-metal-catalyzed addition reactions of groupâ 16 heteroatom compounds to carbon-carbon unsaturated bonds have been limited due to the widespread belief that organic sulfur and selenium compounds are representative catalyst poisons. In recent decades, however, several seminal catalytic reactions of sulfur compounds have been developed, providing important insights into catalysis and poisons. Therefore, this paper focuses on the transition-metal-catalyzed addition of organosulfur compounds to alkynes and alkenes, gains comprehensive insights into the catalysis and catalyst poisons, and proposes concepts for the development of transition-metal-catalyzed reactions of groupâ 16 heteroatom compounds.
RESUMO
Despite the promising pharmacological activity and material properties of five-membered heterocyclic compounds containing phosphorus and nitrogen, synthetic examples of them have been rather limited due to the instability of phosphorus toward air and water. In this study, 1,3-benzoazaphosphol analogues were selected as target molecules, and various synthetic routes were examined to establish a fundamental technology for the introduction of phosphorus groups into aromatic rings and formation of five-membered rings containing phosphorus and nitrogen by cyclization. As a result, we found that 2-aminophenyl(phenyl)phosphine is an extremely promising synthetic intermediate with high stability and easy handling. Furthermore, 2-methyl-3-phenyl-2,3-dihydro-1H-benzo[d][1,3]azaphosphole and 3-phenyl-2,3-dihydro-1H-benzo[d][1,3]azaphosphole-2-thione as synthetically useful 1,3-benzoazaphosphol analogues were successfully synthesized by using 2-aminophenyl(phenyl)phosphine as a key intermediate.
RESUMO
The addition reaction of interelement compounds with heteroatom-heteroatom single bonds to unsaturated bonds under photoirradiation is an important method for the efficient and atom-economical construction of carbon-heteroatom bonds. However, in practice, the desired addition reaction is sometimes unable to proceed as expected due to the low efficiency of the desired addition reactions or the preferential polymerization of unsaturated compounds. In this study, by combining an interelement compound with homologous heteroatom compounds as a catalyst, we succeeded in suppressing the polymerization of the unsaturated compounds and in attaining a highly selective carbon-heteroatom bond formation through the desired addition reaction. In this paper, we have examined in detail whether such a "catalytic radical reaction" proceeds for unsaturated compounds and found that the dithiolation of some unsaturated compounds (i.e., vinylic ethers, styrenes, and isocyanides) could proceed with the assistance of (PhSe)2 under light. The developed methods in this study are expected to have strong implications in the fields of radical chemistry, heteroatom chemistry, synthetic organic chemistry, and catalyst chemistry as atom-economical methods for carbon-heteroatom bond formation.
RESUMO
Intramolecular cyclization reactions of arylpropargyl amides of electron-deficient α,ß-alkenyl carboxylates such as fumarates and ethenetricarboxylates were investigated. The reaction of the fumaramides with a base, Et3N or DBU in xylenes at 140 °C under air gave benz[f]isoindoline derivatives in 21-63% yields. The benz[f]isoindolines may be produced via the formation of an allenic intermediate, intramolecular Diels-Alder reaction, proton transfer, and dehydrogenation by oxygen. The suitable bases and the product yields depend on the substituents on the benzene ring. On the other hand, the reaction of the amides of fumarate and ethenetricarboxylate by heating in DMSO gave aroyl-substituted pyrrolidine derivatives as major products, probably via addition of water under metal-free conditions. Furthermore, cyclization reactions of H and Me substituted alkyne derivatives were investigated for comparison. The selective formation of various types of products, such as ethyl 2-(1-benzyl-4-formyl-2-oxopyrrolidin-3-yl)acetate and diethyl 2-(1-benzyl-2-oxo-4-vinylidenepyrrolidin-3-yl)malonate, was found, depending upon the alkyne substituents and the reaction conditions. The reaction mechanisms have been discussed using density functional theory (DFT) calculations.
RESUMO
The cycloaddition reaction of o-diisocyanoarenes with interelement compounds under light is a very important reaction system to clarify whether this reaction proceeds by radical cyclization or by aza-Bergman cyclization. In this study, a series of diphosphines with phosphorus-phosphorus single bonds were selected as interelement compounds, and their cycloaddition reactions with o-diisocyanoarenes under light were investigated in detail to achieve a novel photoinduced synthesis of bisphosphinated quinoxalines via the radical cyclization pathway. In addition, the photoinduced reaction of diphosphines with isocyanides having o-functional groups such as cyano and ethenyl groups allowed us to elucidate the reaction pathway and product selectivity of this bisphosphination. Furthermore, the one-pot synthesis of PdII -quinoxaline complex was successfully achieved by applying the developed reaction.
RESUMO
In recent years, the importance of "environmentally friendly manufacturing" has been increasing toward the establishment of a resource-recycling society. In organic synthesis, as well, it is becoming increasingly important to develop new synthetic strategies with resource conservation and the recycling of elemental resources in mind, rather than just only synthesis. Many studies on the construction of frameworks of functional molecules using ionic reactions and transition-metal-catalyzed reactions have been reported, but most of them have focused on the formation of carbon-carbon bonds. However, it is essential to introduce appropriate functional groups at appropriate positions in molecules in order for the molecules to express their functions, and furthermore, the highly selective preparation of multiple functional groups is considered important for the creation of new functional molecules. In this review, we focus on radical reactions with high functional group selectivity and overview the recent progress in practical methods for the simultaneous introduction of multiple functional groups and propose future synthetic strategies that emphasize the recycling of elemental resources and environmental friendliness.
Assuntos
Elementos de Transição , Elementos de Transição/química , Metais , Carbono/química , Técnicas de Química SintéticaRESUMO
In recent years, the development of environmentally benign molecular construction methods has been of great importance, and especially, resource recycling, high atomic efficiency, and low environmental impact are in high demand. From this point of view, attention has also been focused on the development of one-pot synthesis of pharmaceuticals and functional molecules. Imines are excellent synthetic intermediates of these useful molecules, and the environmentally friendly oxidative synthesis of imines from amines has been energetically developed using oxygen (or air), which is abundantly available on the Earth, as an oxidant. This review focuses on the latest innovative and green oxidation systems of amines to imines under atmospheric oxygen, and their application to one-pot/eco-friendly and sustainable synthesis of pharmaceuticals and functional molecules. In particular, catalytic systems that activate molecular oxygen are categorized and described in detail as transition metal catalytic systems, photoirradiated catalytic systems, and organocatalytic systems.
Assuntos
Aminas , Iminas , Oxigênio , Estrutura Molecular , Catálise , Preparações FarmacêuticasRESUMO
Intramolecular cycloaddition reactions of α-bromostyrene-functionalized amides of monomethyl fumarate were investigated. The reaction of the amides with Et3N in toluene at 110 °C gave 1,4-dihydronaphthalenes. The 1,4-dihydronaphthalenes may be produced via the intramolecular Diels-Alder reaction, proton transfer, and dehydrobromination by a base, along with CâC bond isomerization by proton transfer. The reaction of amide derivatives with halogen on a benzene ring and alkali metal carbonates in toluene at 110 °C gave naphthalene derivatives directly. Dehydrogenation of various 1,4-dihydronaphthalenes with cesium or rubidium carbonate in toluene at 110 °C gave naphthalene derivatives. The retardation by TEMPO, acceleration by air for some substrates, and density functional theory calculations suggest a radical mechanism caused by intervention of molecular oxygen.
RESUMO
The addition of interelement compounds with heteroatom-heteroatom single bonds to carbon-carbon unsaturated bonds under light irradiation is believed to be an atomically efficient method to procure materials with carbon-heteroatom bonds. In this study, we achieved the photoinduced bisphosphination of alkynes using the phosphorus interelement compound, tetraphenyldiphosphine monosulfide (1), to stereoselectively obtain the corresponding (E)-vic-1,2-bisphosphinoalkenes, which are important transition-metal ligands. The bisphosphination reaction was performed by mixing 1 and various alkynes and then exposing the mixture to light irradiation. Optimization of the conditions for the bisphosphination reaction resulted in a wide substrate range and excellent trans-selectivity. Moreover, the completely regioselective introduction of pentavalent and trivalent phosphorus groups to the terminal and internal positions of the alkynes, respectively, was achieved. We also found that the novel double-bond isomerization reaction of the synthesized bisphosphinated products occurred with a catalytic amount of a base under mild conditions. Our method for the photoinduced bisphosphination of carbon-carbon unsaturated compounds may have strong implications for both organic synthesis and organometallic and catalyst chemistry.
RESUMO
Although diaryl tellurides are parent organotellurium compounds, their synthesis methods, especially for unsymmetrical ones, are limited. This may be due to the instability of diaryl tellurides and their synthesis intermediates under reaction conditions. Radical reactions are known to exhibit excellent functional group selectivity; therefore, we focused on a bimolecular homolytic substitution (SH2) reaction between the aryl radical and diaryl ditelluride. Aryl radicals are generated from arylhydrazines in air and captured by diaryl ditellurides, resulting in a selective formation of unsymmetrical diaryl tellurides with high yields. The electronic effects of the substituents on both arylhydrazines and diaryl ditellurides on the SH2 reaction of tellurium are also discussed in detail.
RESUMO
A simple and efficient method for α-brominating lactones that affords α-bromolactones under mild conditions using tetraalkylammonium hydroxide (R4N+OH-) as a base was developed. Lactones are ring-opened with Br2 and a substoichiometric amount of PBr3, leading to good yields of the corresponding α-bromocarboxylic acids. Subsequent intramolecular cyclization over 1 h using a two-phase system (H2O/CHCl3) containing R4N+OH- afforded α-bromo lactones in good yields. This method can be applied at the 10 mmol scale using simple operations. α-Bromo-δ-valerolactone, which is extremely reactive and difficult to isolate, could be isolated and stored in a freezer for about one week using the developed method. Optimizing the solvent for environmentally friendly large-scale syntheses revealed that methyl ethyl ketone (MEK) was as effective. In addition, in situ-generated α-bromo-δ-valerolactone was directly converted into a sulfur-substituted functional lactone without difficulty by reacting it with a sulfur nucleophile in one pot without isolation. This new bromination system is expected to facilitate the industrial use of α-bromolactones as important intermediates.
RESUMO
A green method of the oxidation of benzylamines to imines was developed using a novel binary system of Au/C-CuO. This system was evaluated under atmospheric oxygen, and the corresponding imines were obtained in up to 100% yields by loading 0.006 mol % of Au/C and 1.25 mol % of CuO under mild conditions. This system was also successfully applied to the syntheses of N-containing functional molecules, as well as that of imines on the scale of several grams. Furthermore, the turnover number of the system (more than 8000 times on a gold basis) as well as its ability to be reused more than 10 times for benzylamine oxidation demonstrates the excellent durability and recyclability of the developed system.
RESUMO
Sequential Knoevenagel condensation/cyclization leading to indene and benzofulvene derivatives has been developed. The reaction of 2-(1-phenylvinyl)benzaldehyde with malonates gave benzylidene malonates, cyclized indenes, and dehydrogenated benzofulvenes. The product selectivity depends on the reaction conditions. The reaction with piperidine, AcOH in benzene at 80 °C for 1.5 h gave a benzylidene malonate in 75% yield as a major product. The reactions with piperidine, AcOH in benzene at 80 °C for 17 h and with TiCl4-pyridine at room temperature gave an indene derivative in 56 and 79% yields, respectively, as a major product. The reaction with TiCl4-Et3N gave a benzofulvene in 40% yield selectively. Indene was transformed to a benzofulvene derivative using the reagents TiCl4-Et3N and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). The reaction of variously substituted aryl derivatives with dimethyl malonate gave indene and benzofulvene derivatives. The reactions of 2-(1-phenylvinyl)benzaldehyde with Meldrum's acid or malononitrile also gave cyclized compounds in the suitable sequential or stepwise conditions. Furthermore, the reaction of 2-arylbenzaldehydes has been investigated. The limitation and scope have been described. The reaction mechanism of the cyclization steps has been examined by DFT calculations.
RESUMO
In this study, the reactivity of organochalcogen compounds toward a representative alkyl-lead bond compound under light was investigated in detail. Under light irradiation, the Cy-Pb bond of Cy6Pb2 (Cy = cyclohexyl) undergoes homolytic cleavage to generate a cyclohexyl radical (Cyâ¢). This radical can be successfully captured by diphenyl diselenide, which exhibits excellent carbon-radical-capturing ability. In the case of (PhS)2 and (PhTe)2, the yields of the corresponding cyclohexyl sulfides and tellurides were lower than that of (PhSe)2. This probably occurred due to the low carbon-radical-capturing ability of (PhS)2 and the high photosensitivity of the cyclohexyl-tellurium bond.
RESUMO
The transition-metal-catalyzed diarylation of isocyanides with triarylbismuthines was investigated in detail, and rhodium catalysts such as [RhCl(nbd)]2 were found to selectively afford N-alkyl diaryl ketimines. On the other hand, palladium-catalyzed diarylation proceeded with the incorporation of two molecules of isocyanide, preferentially yielding N,N'-dialkyl or N,N'-diaryl α-diimines. In addition, a cascade synthesis of 2,3-diarylquinoxalines starting from the palladium-catalyzed diarylation of isocyanides with triarylbismuthines was successfully achieved.
RESUMO
A catalytic oxidation reaction for Acid Blue 7 dye synthesis was evaluated in water. Without lead oxide or manganese oxide derivatives as oxidants, polyoxometalate catalysts were investigated to reduce the usage of harmful heavy metal. A catalyst was prepared by mixing silicotungstic acid with copper oxide, and aqueous hydrogen peroxide (30%) was used as an oxidizing agent. This reaction proceeded to produce Acid Blue 7 from the corresponding leuco acid after 45 min at 95 °C and was viable for a 10 g-scale synthesis.
RESUMO
In this study, a simple one-pot construction of ß-lactam scaffolds was successfully achieved via 4,6-dihydroxysalicylic acid-catalyzed organocatalytic oxidation of amines to imines using molecular oxygen. Although some imines are highly unstable and difficult to isolate by conventional methods, the organocatalytic oxidation of amines described herein, followed by their direct reaction with acyl chlorides in the presence of a base, afforded a series of new ß-lactam derivatives with excellent cis selectivity, which could not be synthesized and isolated by previously reported methods. Thus, this one-pot protocol will be one of the powerful methods applicable to the synthesis of various potential drug candidates and functional molecules. Furthermore, the subsequent hydrolysis of these ß-lactams successfully afforded the corresponding ß-amino acids as almost single diastereomers in up to 99% yields.
Assuntos
Aminas , Aminoácidos , Catálise , Estereoisomerismo , beta-LactamasRESUMO
The homolytic cleavage of the PV(O)-PIII bond in tetraphenyldiphosphine monoxide simultaneously provides both pentavalent and trivalent phosphorus-centered radicals with different reactivities. The method using V-40 as an initiator is successfully investigated for the regio- and stereoselective phosphinylphosphination of terminal alkynes giving the corresponding trans-isomers of 1-diphenylphosphinyl-2-diphenylthiophosphinyl-1-alkenes in good yields. The protocol can be applied to a wide variety of terminal alkynes including both alkyl- and arylalkynes.
RESUMO
A green method for the oxidation of alcohols to carboxylic acids was developed using a novel co-catalytic system based on gold, silver, and copper catalysts. This reaction system was conducted under atmospheric oxygen in water and mild conditions to selectively oxidize 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid, as a building block for polyethylene furanoate, which is a 100% bio-based, future alternative to the petroleum-based polyethylene terephthalate. Furthermore, various primary alcohols were conveniently oxidized to their corresponding carboxylic acids in up to quantitative yields.