Assessment of the root filling volume in C-shaped root canal on cone-beam CT and micro-CT in relation to nano-CT.

AIM: To assess the observed volume of filled C-shaped root canals from different CBCT and micro-CT having nano-CT as a reference. MATERIALS AND METHODS: Twelve extracted mandibular molars with C-shaped root canals were endodontically treated using Reciproc Blue R25 (VDW GMBH, Munich, Germany) in a reciprocating system and filled with gutta-percha (Dentsply Maillefer) and AH Plus sealer (Dentsply DeTrey, Konstanz, Germany). CBCT scans were performed using 3 units-3D Accuitomo 170 (J. Morita, Kyoto, Japan), ProMax 3D Max (Planmeca, Helsinki, Finland), and NewTom VGi EVO (Cefla QR, Verona, Italy)-at two resolution modes: standard and high. Micro-CT and nano-CT scans were also obtained. The volume of all filled C-shaped root canals was obtained using CTAn software (Bruker, Kontich, Belgium), and the blooming artifact, in relation to nano-CT volume, was calculated. The data were evaluated by the Bland-Altman plots and ANOVA two-way for repeated measures (α = 0.05). RESULTS: All CBCT units and micro-CT showed significantly larger observed volume of root canal filling when compared to nano-CT. The blooming artifact of root canal filling in standard resolution was significantly larger than that in high resolution (p < 0.05) in all CBCT units. CONCLUSIONS: Endodontic filling material with AH Plus sealer causes blooming artifacts in CBCT units and micro-CT. CLINICAL RELEVANCE: Considering the anatomical complexity of C-shaped root canals and the challenges associated with endodontic treatment, CBCT is frequently recommended for follow-up evaluations. However, the presence of endodontic filling material can result in blooming artifacts that may potentially impact the accurate diagnosis of endodontic complications.

Influence of CBCT parameters on image quality and the diagnosis of vertical root fractures in teeth with metallic posts: an ex vivo study.

Objectives: The aim of this study was to evaluate the influence of peak kilovoltage (kVp) and a metal artifact reduction (MAR) tool on image quality and the diagnosis of vertical root fracture (VRF) in cone-beam computed tomography (CBCT). Materials and Methods: Twenty single-rooted human teeth filled with an intracanal metal post were divided into 2 groups: control (n = 10) and VRF (n = 10). Each tooth was placed into the socket of a dry mandible, and CBCT scans were acquired using a Picasso Trio varying the kVp (70, 80, 90, or 99), and the use of MAR (with or without). The examinations were assessed by 5 examiners for the diagnosis of VRF using a 5-point scale. A subjective evaluation of the expression of artifacts was done by comparing random axial images of the studied protocols. The results of the diagnoses were analyzed using 2-way analysis of variance and the Tukey post hoc test, the subjective evaluations were compared using the Friedman test, and intra-examiner reproducibility was evaluated using the weighted kappa test (α = 5%). Results: The kVp and MAR did not influence the diagnosis of VRF (p > 0.05). According to the subjective classification, the 99 kVp protocol with MAR demonstrated the least expression of artifacts, while the 70 kVp protocol without MAR led to the most artifacts. Conclusions: Protocols with higher kVp combined with MAR improved the image quality of CBCT examinations. However, those factors did not lead to an improvement in the diagnosis of VRF.

Morphological characteristics of the mesiobuccal root in the presence of a second mesiobuccal canal: a micro-CT study.

Objectives: This study investigated the internal morphology of mesiobuccal (MB) roots of maxillary molars with a second mesiobuccal (MB2) canal. Materials and Methods: Forty-seven maxillary first or second molars from Brazilians were scanned using micro-computed tomography. The following measurements were obtained from the MB roots: root thickness, root width, and dentin thickness of the buccal aspect of the first mesiobuccal (MB1) canal, between the MB1 and MB2 canals, and the palatal aspect of the MB2 and MB1 canals at 3 mm from the root apex and in the furcation region. For statistical analysis, the Student's t-test and analysis of variance with the post-hoc Tukey test were used (α = 0.05). Results: In maxillary molars with an MB2 canal, MB roots were significantly thicker (p = 0.0014) and narrower (p = 0.0016) than in maxillary molars without an MB2 canal. The dentin thickness of the palatal aspect of the MB1 canal was also significantly greater than that of MB roots without an MB2 canal at 3 mm from the root apex (p = 0.0007) and in the furcation region (p < 0.0001). In the furcation region of maxillary molars with an MB2 canal, the dentin thickness between the MB1 and MB2 canals was significantly smaller than that in the buccal and palatal aspects (p < 0.0001). Conclusions: The internal morphology of MB roots of maxillary molars with an MB2 canal revealed differences in dentin thickness, root diameter, and distance between the canals when compared with maxillary molars without an MB2 canal.

CBCT image artefacts generated by implants located inside the field of view or in the exomass.

OBJECTIVES: To compare artefacts in cone-beam computed tomography (CBCT) arising from implants of different materials located either inside the field of view (FOV) or in the exomass, and to test different image-acquisition parameters to reduce them. METHODS: CBCT scans of a human mandible prepared with either a titanium, titanium-zirconium, or zirconia implant were acquired with the Planmeca ProMax utilizing FOV sizes of 8 × 5 cm and 4 × 5 cm, which placed the implant inside the FOV (8 × 5 cm) or in the exomass (4 × 5 cm). The scanning parameters considered three conditions of metal artefact reduction (MAR), disabled, low, and high, and 2 kVp levels (80 and 90). The standard deviation (SD) of grey values of regions of interest was obtained. The effects of implant material, implant position, MAR condition, kVp level, and their interactions were evaluated by Analysis of Variance (α = 5%). RESULTS: The zirconia implant produced the highest SD values (more heterogeneous grey values, corresponding to greater artefact expression), followed by titanium-zirconium, and titanium. In general, implants in the exomass produced images with higher SD values than implants inside the FOV. MAR was effective in decreasing SD values, especially from the zirconia implant, only when the implant was inside the FOV. Images with 80 kVp had higher SD values than those with 90 kVp, regardless of the other factors (p < 0.05). CONCLUSIONS: Implants in the exomass lead to greater artefact expression than when they are inside the FOV. Special attention should be paid to scanning parameters that reduce metal-related artefacts, such as MAR activation and increasing kVp. This is especially important with a zirconia implant inside the FOV.

Prevalence of Errors and Number of Retakes in Panoramic Radiography: Influence of Professional Training and Patient Characteristics

ABSTRACT: Panoramic radiography has clinical importance in several dental specialties. The objective of this study was to evaluate the influence of professionals' experience and patient characteristics (age group and dental absence) in the prevalence of errors and the number of retakes in the panoramic radiography.771 panoramic radiographs were evaluated and classified according to the group of patients (children, dentulous adults, total edentulous adults, and anterior edentulous adults) and professionals who performed the technique (novice and experienced). The association between frequency and type of error, group of patients, professionals' experience, and number of retakes was performed by the Chi-square and Fisher's exact test (a=0.05). There was no significant association between the frequency of errors or retakes of the radiograph s and the professionals' experience or patients' characteristics (p<0.05). The errors "turned head" and "tongue not against the palate," "chin tipped low", "chin not resting on the support," "patient movement during exposure," and "lead apron artifact" showed significantly higher frequency of retake (p<0.05). The most frequent type of error was due to the failure to position the tongue against the palate for all patients and both groups of professionals. The frequency of errors in the panoramic radiography occurs regardless of the professionals' experience, and age and dental absence of the patients. Error occurs mainly due to the lack of patient collaboration, and the examination is rarely repeated by the professionals.

RESUMEN: La radiografía panorámica es de importancia clínica en varias especialidades dentales. El objetivo de este estudio fue evaluar la experiencia de los profesionales y las características de los pacientes (grupo etario y ausencia dentaria) en la prevalencia de errores y el número de repeticiones en la radiografía panorámica.771 radiografías panorámicas fueron evaluadas y clasificadas según la grupo de pacientes (niños, adultos desdentados, adultos desdentados totales y adultos desdentados anteriores) y profesionales que realizaron la técnica (novatos y experimentados). La asociación entre frecuencia y tipo de error, grupo de pacientes, experiencia de los profesionales y número de repeticiones se realizó mediante la prueba de Chicuadrado y exacta de Fisher (a = 0,05). No hubo asociación significativa entre la frecuencia de errores o repetición de las radiografías y la experiencia de los profesionales o las características de los pacientes (p <0,05). Los errores "cabeza girada" y "lengua no contra el paladar", "mentón inclinado hacia abajo", "mentón no apoyado en el soporte", "movimiento del paciente durante la exposición" y "artefacto del delantal de plomo" mostraron una frecuencia de repetición significativamente mayor (p < 0,05). El error más frecuente se debió a la falta de posicionamiento de la lengua contra el paladar para todos los pacientes y en ambos grupos de profesionales. La frecuencia de errores en la radiografía panorámica ocurre independientemente de la experiencia de los profesionales, edad y ausencia dentaria del pacientes. El error se produce principalmente por la falta de colaboración del paciente, y los profesionales rara vez repiten el examen.

Efficacy of digital radiography for detecting a second mesiobuccal canal adjacent to unfilled or filled canals.

The aim of this study was to assess the diagnostic accuracy of digital periapical radiography for the detection of the second mesiobuccal (MB2) canal when the adjacent canals are unfilled or filled with gutta percha. Forty human maxillary first molars were selected, 20 of which had an MB2 canal. The presence or absence of the MB2 canal was confirmed using microcomputed tomography. Digital periapical radiographs of each tooth were obtained from 3 horizontal angles before and after the adjacent root canals were filled with gutta percha. Three experienced oral radiologists evaluated all images and indicated the presence or absence of the MB2 canal using a confidence scale of 5 points. To assess intraobserver and interobserver agreement, weighted kappa coefficients were calculated. The diagnostic test (sensitivity, specificity, and accuracy) and area under the receiver operating characteristic curve (Az) values were calculated and compared between groups (n = 40): radiographs of the first molars with unfilled adjacent canals and radiographs of the same teeth with filled adjacent canals. For all observers, intraobserver reproducibility ranged from substantial (0.70) to almost perfect (0.86), and interobserver reproducibility ranged from fair (0.39) to substantial (0.67). Similar values of specificity and Az for the detection of the MB2 canal were observed with unfilled and filled adjacent canals. The sensitivity and accuracy were slightly greater when the adjacent root canals were filled with gutta percha. Detection of the MB2 canal on digital periapical radiographs can be challenging even when obtained at varying horizontal angles, and the presence of gutta percha does not influence the detection.

Does the administration of meloxicam before head and neck radiotherapy reduce the risk of mandibular osteoradionecrosis? An animal model study.

OBJECTIVE: To assess whether the administration of meloxicam before head and neck radiotherapy reduces the risk of mandibular osteoradionecrosis in rats. MATERIAL AND METHODS: Sixty male Wistar rats were randomly divided into 6 groups (n = 10) according to the meloxicam administration and radiation therapy: control (C), irradiated (I), single dose of meloxicam (M1), single dose of meloxicam and irradiated (M1I), triple dose of meloxicam (M3), triple dose of meloxicam and irradiated (M3I). Meloxicam was administrated (20 mg/kg per dose) 1 h before the radiation therapy (single dose of 20 Gy) and 24 h and 48 h after the radiation therapy for groups with two additional doses. Ten days after the radiation therapy, the three right mandibular molars were extracted from all rats, who were euthanatized after 21 or 35 days (n = 5 per group). The mandibles were assessed by macroscopic evaluation and micro-CT analysis. RESULTS: The right hemimandibles of the irradiated groups revealed macroscopic signs of osteoradionecrosis, and those of the non-irradiated groups revealed complete gingival healing. A significant delay in alveolar socket healing in all irradiated groups was observed in the micro-CT assessment regardless meloxicam treatment. CONCLUSION: The administration of meloxicam before head and neck radiotherapy does not reduce the risk of mandibular osteoradionecrosis when associated to dental extractions. CLINICAL RELEVANCE: Since meloxicam has been shown to be a potential radiation-protective agent, and osteoradionecrosis physiopathology is believed to be related to an inflammatory process, possible interactions are relevant to be investigated.

Misfit detection in implant-supported prostheses of different compositions by periapical radiography and cone beam computed tomography: An in vitro study.

STATEMENT OF PROBLEM: Misfits at the implant-abutment joint (IAJ) can cause the biological and mechanical failure of implant therapy. Standard parallel periapical radiography (PERI) is the method of choice for assessing the fitting of implant-supported prostheses. Although current guidelines do not support the use of cone beam computed tomography (CBCT) solely for misfit detection, CBCT scans can also register misfits as imaging findings. Whether the material used for prostheses manufacturing influences misfit appearance in PERI and CBCT images is unknown. PURPOSE: The purpose of this in vitro study was to assess the influence of the type of prosthesis material on misfit detection at the IAJ by using PERI and CBCT. MATERIAL AND METHODS: Thirty-two implants with an external hexagon connection were placed in dried human mandibles. Implant-supported crowns were manufactured with different materials and allocated to 3 experimental groups: metal-ceramic (MC), titanium abutment veneered with acrylic resin (TIT), and zirconia abutment veneered with glass-ceramic (ZIR). All crowns were installed both with and without a simulated 200-µm-thick gap at the IAJ (n=64) and were assessed by PERI and CBCT scans. Four dentists evaluated the images for the presence or absence of misfit. Statistical analysis included the Kappa test and areas under the receiver operating characteristics curve (Az values) comparisons (α=.05). RESULTS: Kappa values indicated almost perfect intraevaluator and interevaluator reproducibility for PERI and ranged from fair to almost perfect for CBCT. For PERI, Az values were not significantly different among the MC (0.995), TIT (0.997), and ZIR groups (1.000) (P>.05). Regarding CBCT, the Az values found for TIT (0.941) and MC (0.890) were significantly higher than for ZIR (0.762) (P<.05). Az values for PERI were significantly higher than for CBCT (P<.05). CONCLUSIONS: The type of prosthesis material did not influence misfit detection at the IAJ with PERI; however, ZIR had lower diagnostic accuracy than TIT and MC implant-supported crowns with CBCT.

Objective assessment of the combined effect of exomass-related- and motion artefacts in cone beam CT.

OBJECTIVES: To assess quantitatively the combined effect of exomass-related- and motion artefacts on voxel value parameters in cone beam CT (CBCT). METHODS: A cylindrical phantom was manufactured, containing 21 tubes filled with a radiopaque solution, allowing the inclusion of three titanium implants in the periphery to induce exomass-related artefacts. The phantom was mounted on a robot simulating 0.75-, 1.5-, and 3 mm movements (nodding/lateral rotation/tremor). CBCT images with/without exomass and with/without movements were acquired in duplicate in three units: Cranex 3Dx, Orthophos SL-3D, and X1 (with motion-artefact correction). A cylindrical volume of interest was defined in each tube and voxel value mean and standard deviation were assessed. For each CBCT volume, the 21 mean voxel values were averaged providing the overall mean voxel value (MVV), and the standard deviation (among the 21 values) was calculated providing overall voxel value inhomogeneity (VVI). The standard deviation from each of the 21 volumes-of-interest were averaged, providing overall image noise (IN). The effect of the diverse tested situations was inferred from a repeated-measures analysis of variance, followed by Sidak's test (α = 0.05). RESULTS: Overall, images acquired with exomass showed significantly (p ≤ 0.05) lower MVV, and higher VVI and IN. Motion artefacts aggravated exomass-related alterations. MVV and VVI were mostly affected by 3 mm nodding movements. Motion-artefact correction eliminated the deleterious effect of movement. CONCLUSIONS: CBCT voxel-value parameters are altered by exomass-related artefacts, and this finding is aggravated in the presence of motion artefacts. Motion-artefact correction effectively eliminated the deleterious impact of movement.

Outcomes of traumatised immature teeth treated with apexification or regenerative endodontic procedure: a retrospective study.

This study compares the clinical success rate and continued radiographic root development of apexification and regenerative endodontic procedure in traumatised immature permanent teeth, and proposes a method to evaluate apical convergence, namely apical angle. Clinical and radiological data were collected from 44 treated teeth (22 with apexification and 22 with regenerative endodontic procedure). The preoperative and follow-up periapical radiographs were analysed to calculate the percentage changes in root length, root width, apical diameter and apical angle. The success rates for complete healing with apexification and regenerative endodontic procedure were 86.36% and 95.45%, respectively. Radiographically, regenerative endodontic procedure showed significantly greater percentage changes in root width only (P < 0.05). Apexification and regenerative endodontic procedure provide satisfactory outcomes concerning clinical success rates. Continued root development in regenerative endodontic procedure was similar to apexification, except for root width. Apical angle allowed us to assess the convergence of the root canal walls.

Influence of the exomass on the detection of simulated root fracture in cone-beam CT - an ex-vivo study.

OBJECTIVES: To evaluate the influence of exomass-related metal artefacts on the detection of simulated vertical root fracture (VRF) in cone-beam computed tomography (CBCT). METHODS: 20 teeth were endodontically instrumented and VRF was induced in half of them. All teeth were individually placed in an empty socket of a human mandible. Metallic materials were differently arranged in the exomass [zone outside of the field of view (FOV) but between the X-ray source and the receptor] and/or endomass (zone inside of the FOV), and CBCT scans were obtained. Four radiologists evaluated the presence of VRF using a 5-point scale. Sensitivity, specificity, and area under the receiver operating curve (AUC) were compared using ANOVA. Also, the tooth of interest was replaced with a tube filled with a radiopaque solution and all CBCT scans were repeated to analyse the data objectively. Mean grey and noise values were obtained from the tube and compared using ANOVA followed by Tukey's test (α = 0.05). RESULTS: Mean grey values were significantly lower and noise was significantly higher when metallic materials were present in the endomass or both the exomass and endomass. Sensitivity, specificity, and AUC were not influenced by the artefacts from the metallic materials irrespective of the arrangement condition. CONCLUSIONS: Exomass-related metal artefacts did not influence the diagnosis of simulated VRF in CBCT.

Treatment outcomes of pulp revascularization in traumatized immature teeth using calcium hydroxide and 2% chlorhexidine gel as intracanal medication.

OBJECTIVE: Pulp revascularization is an effective treatment for immature necrotic teeth. Calcium hydroxide has been used in pulp revascularization as an intracanal medication due to its antimicrobial action and the non-exhibition of crown discoloration and cytotoxicity for stem cells from the apical papilla. Our study aimed to investigate the clinical success and quantitative radiographic changes of root development in immature traumatized teeth using calcium hydroxide plus 2% chlorhexidine gel as intracanal medication. METHODOLOGY: In this retrospective study, 16 patients were treated with a standardized pulp revascularization protocol. Calcium hydroxide and 2% chlorhexidine gel were manipulated in a 1:1 (v/v) ratio and inserted into root canals with Lentulo spirals (Dentsply Maillefer, Baillaigues, Switzerland). Patients were followed up for a period from 9 to 36 months for the evaluation of clinical and radiological data. Radiographic measurements of root length, root width, apical diameter, and MTA placement from the apex were quantified using software ImageJ. Wilcoxon test and t-test were used, according to nonparametric or parametric data, respectively, for changes over time in root length, root width, and apical diameter. RESULTS: Fifteen teeth survived during the follow-up period (93.75%) and met the criteria for clinical success. Although the changes seem to be very small in many cases, significant increases in the average root length (14.28%, p<0.0001), root width (8.12%, p=0.0196), and decrease in apical diameter (48.37%, p=0.0007) were observed. MTA placement from the apex and age at the time of treatment was not significantly associated with the quantitative radiographic outcomes. CONCLUSIONS: Pulp revascularization in traumatized immature teeth treated with calcium hydroxide plus 2% chlorhexidine gel as intracanal medication had high success and survival rates, showing periodontal healing and resolution of signs and symptoms. However, concerning the continued root development, the outcomes can still be considered unpredictable.

Automatic exposure compensation and subjective image enhancement in the radiographic diagnosis of caries.

This study aims to assess the influence of high-density material on the radiographic diagnosis of proximal caries in digital systems with automatic exposure compensation, and to evaluate the effect of subjective adjustment of brightness and contrast to undertake this diagnostic task. Twenty bitewing radiographs of forty posterior human teeth with non-cavitated carious lesions, confirmed by micro-CT, were obtained with two digital systems. A porcelain-fused-to-metal crown attached to a titanium implant was inserted into the exposed area, and all the radiographs were repeated. Five radiologists assessed the radiographs and diagnosed proximal carious lesions. Afterwards, the observers were asked to adjust image brightness and contrast, based on their subjective perception, and to reassess the images. Thirty percent of each experimental group was reassessed to test intraobserver reproducibility, totaling 208 images per observer. Intraobserver and interobserver agreements ranged from fair to substantial. Sensitivity, specificity, predictive values, and area under the ROC curve were calculated and compared for each radiographic system, using ANOVA (α = 0.05). Overall, presence of high-density material and adjustment of brightness and contrast did not significantly influence the radiographic diagnosis of proximal caries (p ≥ 0.05). Regarding Digora Optime, adjustment of brightness and contrast significantly increased (p < 0.05) the diagnostic accuracy of proximal carious lesions in the presence of high-density material. In conclusion, the presence of high-density material in the X-rayed region does not influence radiographic diagnosis of proximal caries. However, when it is present in the X-rayed area, subjective adjustment of brightness and contrast is recommended for use with the Digora Optime digital system.

Influence of the Intracanal Material and Metal Artifact Reduction Tool in the Detection of the Second Mesiobuccal Canal in Cone-beam Computed Tomographic Examinations.

INTRODUCTION: The aim of this study was to evaluate the influence of different intracanal materials and the metallic artifact reduction (MAR) tool of cone-beam computed tomographic (CBCT) imaging on the detection of the second mesiobuccal (MB2) canal in maxillary first molars. METHODS: Forty maxillary first molars were selected; half of them had the MB2 canal in the mesiobuccal root confirmed by micro-computed tomographic imaging. All teeth were instrumented, except for the MB2 canal, and filled with gutta-percha, which was passively inserted up to the working length. Each tooth was individually inserted into a dry human skull, and CBCT scans were performed using the OP300 device (Instrumentarium Dental, Tuusula, Finland) with and without the use of the MAR tool. For each scanned tooth, the following intracanal materials were used in the palatal root: gutta-percha, silver palladium, nickel chromium, and cobalt chromium. Five examiners assessed the images for the detection of the MB2 canal using a 5-point scale. The weighted kappa test was applied to evaluate intra- and interexaminer reproducibility. The diagnostic values (sensitivity, specificity, and area under the receiver operating characteristic curve) were calculated in the different groups and compared using 2-way analysis of variance and the Tukey post hoc test. RESULTS: The intra- and interobserver agreement ranges for the different conditions were studied. The diagnostic values were not significantly different (P > .05) regardless of the intracanal material and the use of the MAR tool. CONCLUSIONS: The presence of different intracanal materials and MAR activation does not influence CBCT-based detection of MB2 canals.

Assessment of dentists' behaviour on the use of patients' images.

BACKGROUND: Photographs and radiographs are indispensable resources for dental education, research and dissemination of clinical cases in scientific journals. The objective of this study was to evaluate the behaviour of dentists on the use of patients' images. MATERIAL AND METHODS: Fifty-two dentists were interviewed using a semi-structured script containing open-ended questions on the use of patients' images. The answers were analysed using a qualitative-quantitative method of the discourse of the collective subject, and the distribution of the absolute and relative frequency of the answers was presented according to the central ideas obtained from the discourses. RESULTS: The following central ideas on the use of patients' images were identified: (a) purpose: didactic and/or academic; (b) informed consent: verbal or absent when the patient cannot be identified; (c) discussion groups on social media contribute to learning; (d) most dentists would not appreciate and sue the author if they had their own photographs/imaging examinations posted on social media; 5. most dentists received some information on ethical regulations during dental school and state that images can be used with patient authorisation, without identification and for didactic/academic purposes. CONCLUSION: Dentists consider the use of patients' images for didactic and scientific purposes beneficial, request informed consent to share mainly images that reveal the identity and would not appreciate if their personal images were shared without consent.

Validity of an Inexpensive Hanging Scale During Isometric Shoulder Movements.

CONTEXT: Strength assessment is essential to prescribe exercise in sports and rehabilitation. Low-cost valid equipment may allow continuous monitoring of training. OBJECTIVE: To examine the validity of a very low-cost hanging scale by comparing differences in the measures of peak force to a laboratory grade load cell during shoulder abduction, flexion, extension, and internal and external rotations. DESIGN: Analytical study. PARTICIPANTS: Thirty-two healthy subjects (18 women, age 26 [10] y, height 172 [8] cm, mass 69 [13] kg, body mass index 23 [4] kg/m2). MAIN OUTCOME MEASURES: The dependent variable was the maximal peak force (in kilogram-force). The independent variable was the instrument (laboratory grade load cell and hanging scale). RESULTS: No differences were observed while comparing the results. The intraclass correlation coefficients1,1 ranged from .96 to .99, showing excellent results. The Cronbach alpha test also returned >.99 for all comparisons. The SEM ranged from 0.02 to 0.04 kgf, with an averaged SD from 0.24 to 0.38 kgf. The correlation was classified as high for all tested movements (r > .99; P < .001), with excellent adjusted coefficients of determination (.96 < r2 < .99). Bland-Altman results showed high levels of agreement with bias ranging from 0.27 to 0.48. CONCLUSIONS: Hanging scale provides valid measures of isometric strength with similar output measures as laboratory grade load cell.

Distribution of metal artifacts arising from the exomass in small field-of-view cone beam computed tomography scans.

OBJECTIVES: To evaluate the distribution of metal artifacts from the exomass in small field-of-view (FOV) cone beam computed tomography (CBCT) scans. STUDY DESIGN: An image phantom was scanned by using 3 CBCT units. Metal objects were positioned in the exomass, and additional CBCT scans were obtained. Mean gray values were obtained from 16 homogeneous areas and the standard deviation was calculated to quantify gray level inhomogeneity according to distinct zones of the FOV: total area and outer, inner, right, left, and mid-zones. The discrepancy between each zone and the total area was calculated to compare different CBCT units. Mean gray, gray level inhomogeneity, and discrepancy values were separately assessed by using analysis of variance (ANOVA) and Tukey's test (α = 0.05). RESULTS: Overall, the mean gray values were significantly lower in the inner zone, and the gray level inhomogeneity values were significantly higher in the inner and mid-zones irrespective of the presence of metal objects in the exomass. The 3 CBCT units presented significantly different discrepancy values in most conditions. CONCLUSIONS: The distribution of metal artifacts from the exomass follows the inherent gray value dispersion of CBCT images, with greater inhomogeneity in the inner zone of the FOV. This is exacerbated when metal objects are in the exomass.

Retrospective assessment of dental implant-related perforations of relevant anatomical structures and inadequate spacing between implants/teeth using cone-beam computed tomography.

OBJECTIVES: To assess the prevalence of dental implant-related perforations of relevant anatomical structures and inadequate spacing between the implant and the adjacent tooth or implant, and their association with anatomical location, implant dimension, thread exposure, and presence of graft, using cone beam computed tomography (CBCT). MATERIALS AND METHODS: CBCT scans of patients with implants were retrospectively assessed regarding the presence of implant-related perforation of adjacent anatomical structures, and inadequate mesial and distal spacing between the implant and the adjacent tooth/implant (i.e., < 1 mm or < 3 mm, respectively). Implants were classified according to anatomical location, dimensions, thread exposure, and the presence of graft (i.e., bone graft or bone substitutes). Prevalence of perforations and inadequate spacing was compared among the different implant classifications (Chi-squared test). Significance level was set at 5%. RESULTS: A total of 1109 implants were assessed, out of which 369 (33.3%) presented perforation of adjacent structures. Prevalence of perforations in the maxilla (43.5%) was higher than in the mandible (11.3%). Inadequate spacing was found in 18.2% of the mesial and distal measurements, which was more prevalent in the maxilla (p < 0.001). Implants perforating adjacent structures or placed with inadequate spacing presented higher prevalence of thread exposure (p < 0.001). No significant difference was found between the presence of perforations or inadequate spacing and presence of graft (p > 0.05). CONCLUSIONS: Implant-related perforations of relevant anatomical structures and inadequate spacing between the implant and the adjacent tooth/implant are relatively prevalent and more common in the maxilla. Both are associated with threads exposure. CLINICAL RELEVANCE: Information on dental implant-related perforations and inadequate spacing can assist dental surgeons in pre-surgical planning.

Is the digital radiographic detection of approximal caries lesions influenced by viewing conditions?

OBJECTIVES: The aim of this study was to assess the influence of different viewing conditions (combinations of computer display, horizontal viewing angle, and ambient lighting) on the detection of approximal caries lesions on digital radiographic images. STUDY DESIGN: Forty posterior teeth were mounted in a plaster block and radiographed by using a CMOS sensor-based system. Three oral radiologists assessed the radiographic images under different conditions of computer display (iMac 5K 27", Barco MDRC-2124, and Dell P2314H), horizontal viewing angles (90 degrees, 67.5 degrees, and 45 degrees), and ambient lighting (low, medium, and high) and were asked to detect the presence of approximal caries lesions, which were confirmed by means of micro-computed tomography (micro-CT), using a 5-point scale. The area under the receiver operating characteristic curve, sensitivity, and specificity were calculated and compared by analysis of variance testing (α = 0.05). Intra- and interobserver agreements were assessed with the Kappa test. RESULTS: Computer display, horizontal viewing angle, and ambient lighting did not significantly influence the diagnosis of approximal caries lesions. In general, moderate values of accuracy, low sensitivity, and high specificity were found for all viewing conditions. CONCLUSIONS: The viewing conditions assessed in this study did not influence the detection of approximal caries lesions on digital radiographic images. Dental practitioners are encouraged to find their most comfortable viewing condition for this diagnostic task.