NMR and Mössbauer Studies Reveal a Temperature-Dependent Switch from S = 1 to 2 in a Nonheme Oxoiron(IV) Complex with Faster C-H Bond Cleavage Rates.

S = 2 FeIV═O centers generated in the active sites of nonheme iron oxygenases cleave substrate C-H bonds at rates significantly faster than most known synthetic FeIV═O complexes. Unlike the majority of the latter, which are S = 1 complexes, [FeIV(O)(tris(2-quinolylmethyl)amine)(MeCN)]2+ (3) is a rare example of a synthetic S = 2 FeIV═O complex that cleaves C-H bonds 1000-fold faster than the related [FeIV(O)(tris(pyridyl-2-methyl)amine)(MeCN)]2+ complex (0). To rationalize this significant difference, a systematic comparison of properties has been carried out on 0 and 3 as well as related complexes 1 and 2 with mixed pyridine (Py)/quinoline (Q) ligation. Interestingly, 2 with a 2-Q-1-Py donor combination cleaves C-H bonds at 233 K with rates approaching those of 3, even though Mössbauer analysis reveals 2 to be S = 1 at 4 K. At 233 K however, 2 becomes S = 2, as shown by its 1H NMR spectrum. These results demonstrate a unique temperature-dependent spin-state transition from triplet to quintet in oxoiron(IV) chemistry that gives rise to the high C-H bond cleaving reactivity observed for 2.

Nonheme Diiron Oxygenase Mimic That Generates a Diferric-Peroxo Intermediate Capable of Catalytic Olefin Epoxidation and Alkane Hydroxylation Including Cyclohexane.

Herein are described substrate oxidations with H2O2 catalyzed by [FeII(IndH)(CH3CN)3](ClO4)2 [IndH = 1,3-bis(2'-pyridylimino)isoindoline], involving a spectroscopically characterized (µ-oxo)(µ-1,2-peroxo)diiron(III) intermediate (2) that is capable of olefin epoxidation and alkane hydroxylation including cyclohexane. Species 2 also converts ketones to lactones with a decay rate dependent on [ketone], suggesting direct nucleophilic attack of the substrate carbonyl group by the peroxo species. In contrast, peroxo decay is unaffected by the addition of olefins or alkanes, but the label from H218O is incorporated into the the epoxide and alcohol products, implicating a high-valent iron-oxo oxidant that derives from O-O bond cleavage of the peroxo intermediate. These results demonstrate an ambiphilic diferric-peroxo intermediate that mimics the range of oxidative reactivities associated with O2-activating nonheme diiron enzymes.

NMR Reveals That a Highly Reactive Nonheme FeIV =O Complex Retains Its Six-Coordinate Geometry and S=1 State in Solution.

The [FeIV (O)(Me3 NTB)]2+ (Me3 NTB=tris[(1-methyl-benzimidazol-2-yl)methyl]amine) complex 1 has been shown by Mössbauer spectroscopy to have an S=1 ground state at 4 K, but is proposed to become an S=2 trigonal-bipyramidal species at higher temperatures based on a DFT model to rationalize its very high C-H bond-cleavage reactivity. In this work, 1 H NMR spectroscopy was used to determine that 1 does not have C3 -symmetry in solution and is not an S=2 species. Our results show that 1 is unique among nonheme FeIV =O complexes in retaining its S=1 spin state and high reactivity at 193 K, providing evidence that S=1 FeIV =O complexes can be as reactive as their S=2 counterparts. This result emphasizes the need to identify factors besides the ground spin state of the FeIV =O center to rationalize nonheme oxoiron(IV) reactivity.

Detection of a transient FeV(O)(OH) species involved in olefin oxidation by a bio-inspired non-haem iron catalyst.

The Fe(TPA) (TPA = tris(pyridyl-2-methyl)amine) class of non-haem Fe catalysts is proposed to carry out selective hydrocarbon oxidations through the generation of high-valent iron species. Using ambient mass spectrometry, we obtain direct evidence for the formation of an FeV(O)(OH) species under catalytic conditions. In addition, 18O-labelling suggests that this FeV(O)(OH) species serves as the active oxidant in hydrocarbon oxidation catalysis.

Spectroscopic and DFT Characterization of a Highly Reactive Nonheme FeV-Oxo Intermediate.

The reaction of [(PyNMe3)FeII(CF3SO3)2], 1, with excess peracetic acid at -40 °C generates a highly reactive intermediate, 2b(PAA), that has the fastest rate to date for oxidizing cyclohexane by a nonheme iron species. It exhibits an intense 490 nm chromophore associated with an S = 1/2 EPR signal having g-values at 2.07, 2.01, and 1.94. This species was shown to be in a fast equilibrium with a second S = 1/2 species, 2a(PAA), assigned to a low-spin acylperoxoiron(III) center. Unfortunately, contaminants accompanying the 2(PAA) samples prevented determination of the iron oxidation state by Mössbauer spectroscopy. Use of MeO-PyNMe3 (an electron-enriched version of PyNMe3) and cyclohexyl peroxycarboxylic acid as oxidant affords intermediate 3b(CPCA) with a Mössbauer isomer shift δ = -0.08 mm/s that indicates an iron(V) oxidation state. Analysis of the Mössbauer and EPR spectra, combined with DFT studies, demonstrates that the electronic ground state of 3b(CPCA) is best described as a quantum mechanical mixture of [(MeO-PyNMe3)FeV(O)(OC(O)R)]2+ (∼75%) with some FeIV(O)(•OC(O)R) and FeIII(OOC(O)R) character. DFT studies of 3b(CPCA) reveal that the unbound oxygen of the carboxylate ligand, O2, is only 2.04 Å away from the oxo group, O1, corresponding to a Wiberg bond order for the O1-O2 bond of 0.35. This unusual geometry facilitates reversible O1-O2 bond formation and cleavage and accounts for the high reactivity of the intermediate when compared to the rates of hydrogen atom transfer and oxygen atom transfer reactions of FeIII(OC(O)R) ferric acyl peroxides and FeIV(O) complexes. The interaction of O2 with O1 leads to a significant downshift of the Fe-O1 Raman frequency (815 cm-1) relative to the 903 cm-1 value predicted for the hypothetical [(MeO-PyNMe3)FeV(O)(NCMe)]3+ complex.

Acid-Triggered O-O Bond Heterolysis of a Nonheme FeIII (OOH) Species for the Stereospecific Hydroxylation of Strong C-H Bonds.

A novel hydroperoxoiron(III) species [FeIII (OOH)(MeCN)(PyNMe3 )]2+ (3) has been generated by reaction of its ferrous precursor [FeII (CF3 SO3 )2 (PyNMe3 )] (1) with hydrogen peroxide at low temperatures. This species has been characterized by several spectroscopic techniques and cryospray mass spectrometry. Similar to most of the previously described low-spin hydroperoxoiron(III) compounds, 3 behaves as a sluggish oxidant and it is not kinetically competent for breaking weak C-H bonds. However, triflic acid addition to 3 causes its transformation into a much more reactive compound towards organic substrates that is capable of oxidizing unactivated C-H bonds with high stereospecificity. Stopped-flow kinetic analyses and theoretical studies provide a rationale for the observed chemistry, a triflic-acid-assisted heterolytic cleavage of the O-O bond to form a putative strongly oxidizing oxoiron(V) species. This mechanism is reminiscent to that observed in heme systems, where protonation of the hydroperoxo intermediate leads to the formation of the high-valent [(Porph. )FeIV (O)] (Compound I).

Equilibrating (L)FeIII-OOAc and (L)FeV(O) Species in Hydrocarbon Oxidations by Bio-Inspired Nonheme Iron Catalysts Using H2O2 and AcOH.

Inspired by the remarkable chemistry of the family of Rieske oxygenase enzymes, nonheme iron complexes of tetradentate N4 ligands have been developed to catalyze hydrocarbon oxidation reactions using H2O2 in the presence of added carboxylic acids. The observation that the stereo- and enantioselectivity of the oxidation products can be modulated by the electronic and steric properties of the acid implicates an oxidizing species that incorporates the carboxylate moiety. Frozen solutions of these catalytic mixtures generally exhibit EPR signals arising from two S = 1/2 intermediates, a highly anisotropic g2.7 subset (gmax = 2.58 to 2.78 and Δg = 0.85-1.2) that we assign to an FeIII-OOAc species and a less anisotropic g2.07 subset (g = 2.07, 2.01, and 1.96 and Δg ≈ 0.11) we associate with an FeV(O)(OAc) species. Kinetic studies on the reactions of iron complexes supported by the TPA (tris(pyridyl-2-methyl)amine) ligand family with H2O2/AcOH or AcOOH at -40 °C reveal the formation of a visible chromophore at 460 nm, which persists in a steady state phase and then decays exponentially upon depletion of the peroxo oxidant with a rate constant that is substrate independent. Remarkably, the duration of this steady state phase can be modulated by the nature of the substrate and its concentration, which is a rarely observed phenomenon. A numerical simulation of this behavior as a function of substrate type and concentration affords a kinetic model in which the two S = 1/2 intermediates exist in a dynamic equilibrium that is modulated by the electronic properties of the supporting ligands. This notion is supported by EPR studies of the reaction mixtures. Importantly, these studies unambiguously show that the g2.07 species, and not the g2.7 species, is responsible for substrate oxidation in the (L)FeII/H2O2/AcOH catalytic system. Instead the g2.7 species appears to be off-pathway and serves as a reservoir for the g2.07 species. These findings will be helpful not only for the design of regio- and stereospecific nonheme iron oxidation catalysts but also for providing insight into the mechanisms of the remarkably versatile oxidants formed by nature's most potent oxygenases.

Trapping a Highly Reactive Nonheme Iron Intermediate That Oxygenates Strong C-H Bonds with Stereoretention.

An unprecedentedly reactive iron species (2) has been generated by reaction of excess peracetic acid with a mononuclear iron complex [Fe(II)(CF3SO3)2(PyNMe3)] (1) at cryogenic temperatures, and characterized spectroscopically. Compound 2 is kinetically competent for breaking strong C-H bonds of alkanes (BDE ≈ 100 kcal·mol(-1)) through a hydrogen-atom transfer mechanism, and the transformations proceed with stereoretention and regioselectively, responding to bond strength, as well as to steric and polar effects. Bimolecular reaction rates are at least an order of magnitude faster than those of the most reactive synthetic high-valent nonheme oxoiron species described to date. EPR studies in tandem with kinetic analysis show that the 490 nm chromophore of 2 is associated with two S = 1/2 species in rapid equilibrium. The minor component 2a (∼5% iron) has g-values at 2.20, 2.19, and 1.99 characteristic of a low-spin iron(III) center, and it is assigned as [Fe(III)(OOAc)(PyNMe3)](2+), also by comparison with the EPR parameters of the structurally characterized hydroxamate analogue [Fe(III)(tBuCON(H)O)(PyNMe3)](2+) (4). The major component 2b (∼40% iron, g-values = 2.07, 2.01, 1.95) has unusual EPR parameters, and it is proposed to be [Fe(V)(O)(OAc)(PyNMe3)](2+), where the O-O bond in 2a has been broken. Consistent with this assignment, 2b undergoes exchange of its acetate ligand with CD3CO2D and very rapidly reacts with olefins to produce the corresponding cis-1,2-hydroxoacetate product. Therefore, this work constitutes the first example where a synthetic nonheme iron species responsible for stereospecific and site selective C-H hydroxylation is spectroscopically trapped, and its catalytic reactivity against C-H bonds can be directly interrogated by kinetic methods. The accumulated evidence indicates that 2 consists mainly of an extraordinarily reactive [Fe(V)(O)(OAc)(PyNMe3)](2+) (2b) species capable of hydroxylating unactivated alkyl C-H bonds with stereoretention in a rapid and site-selective manner, and that exists in fast equilibrium with its [Fe(III)(OOAc)(PyNMe3)](2+) precursor.

Bioinspired Nonheme Iron Catalysts for C-H and C═C Bond Oxidation: Insights into the Nature of the Metal-Based Oxidants.

Recent efforts to design synthetic iron catalysts for the selective and efficient oxidation of C-H and C═C bonds have been inspired by a versatile family of nonheme iron oxygenases. These bioinspired nonheme (N4)Fe(II) catalysts use H2O2 to oxidize substrates with high regio- and stereoselectivity, unlike in Fenton chemistry where highly reactive but unselective hydroxyl radicals are produced. In this Account, we highlight our efforts to shed light on the nature of metastable peroxo intermediates, which we have trapped at -40 °C, in the reactions of the iron catalyst with H2O2 under various conditions and the high-valent species derived therefrom. Under the reaction conditions that originally led to the discovery of this family of catalysts, we have characterized spectroscopically an Fe(III)-OOH intermediate (EPR g(max) = 2.19) that leads to the hydroxylation of substrate C-H bonds or the epoxidation and cis-dihydroxylation of C═C bonds. Surprisingly, these organic products show incorporation of (18)O from H2(18)O, thereby excluding the possibility of a direct attack of the Fe(III)-OOH intermediate on the substrate. Instead, a water-assisted mechanism is implicated in which water binding to the iron(III) center at a site adjacent to the hydroperoxo ligand promotes heterolytic cleavage of the O-O bond to generate an Fe(V)(O)(OH) oxidant. This mechanism is supported by recent kinetic studies showing that the Fe(III)-OOH intermediate undergoes exponential decay at a rate enhanced by the addition of water and retarded by replacement of H2O with D2O, as well as mass spectral evidence for the Fe(V)(O)(OH) species obtained by the Costas group. The nature of the peroxo intermediate changes significantly when the reactions are carried out in the presence of carboxylic acids. Under these conditions, spectroscopic studies support the formation of a (κ(2)-acylperoxo)iron(III) species (EPR g(max) = 2.58) that decays at -40 °C in the absence of substrate to form an oxoiron(IV) byproduct, along with a carboxyl radical that readily loses CO2. The alkyl radical thus formed either reacts with O2 to form benzaldehyde (as in the case of PhCH2COOH) or rebounds with the incipient Fe(IV)(O) moiety to form phenol (as in the case of C6F5COOH). Substrate addition leads to its 2-e(-) oxidation and inhibits these side reactions. The emerging mechanistic picture, supported by DFT calculations of Wang and Shaik, describes a rather flat reaction landscape in which the (κ(2)-acylperoxo)iron(III) intermediate undergoes O-O bond homolysis reversibly to form an Fe(IV)(O)((•)OC(O)R) species that decays to Fe(IV)(O) and RCO2(•) or isomerizes to its Fe(V)(O)(O2CR) electromer, which effects substrate oxidation. Another short-lived S = 1/2 species just discovered by Talsi that has much less g-anisotropy (EPR g(max) = 2.07) may represent either of these postulated high-valent intermediates.

C-H Bond Cleavage by Bioinspired Nonheme Oxoiron(IV) Complexes, Including Hydroxylation of n-Butane.

The development of efficient and selective hydrocarbon oxidation processes with low environmental impact remains a major challenge of the 21st century because of the strong and apolar nature of the C-H bond. Naturally occurring iron-containing metalloenzymes can, however, selectively functionalize strong C-H bonds on substrates under mild and environmentally benign conditions. The key oxidant in a number of these transformations is postulated to possess an S = 2 Fe(IV)═O unit in a nonheme ligand environment. This oxidant has been trapped and spectroscopically characterized and its reactivity toward C-H bonds demonstrated for several nonheme iron enzyme classes. In order to obtain insight into the structure-activity relationships of these reactive intermediates, over 60 synthetic nonheme Fe(IV)(O) complexes have been prepared in various laboratories and their reactivities investigated. This Forum Article summarizes the current status of efforts in the characterization of the C-H bond cleavage reactivity of synthetic Fe(IV)(O) complexes and provides a snapshot of the current understanding of factors that control this reactivity, such as the properties of the supporting ligands and the spin state of the iron center. In addition, new results on the oxidation of strong C-H bonds such as those of cyclohexane and n-butane by a putative S = 2 synthetic Fe(IV)(O) species that is generated in situ using dioxygen at ambient conditions are presented.

Modeling TauD-J: a high-spin nonheme oxoiron(IV) complex with high reactivity toward C-H bonds.

High-spin oxoiron(IV) species are often implicated in the mechanisms of nonheme iron oxygenases, their C-H bond cleaving properties being attributed to the quintet spin state. However, the few available synthetic S = 2 Fe(IV)═O complexes supported by polydentate ligands do not cleave strong C-H bonds. Herein we report the characterization of a highly reactive S = 2 complex, [Fe(IV)(O)(TQA)(NCMe)](2+) (2) (TQA = tris(2-quinolylmethyl)amine), which oxidizes both C-H and C═C bonds at -40 °C. The oxidation of cyclohexane by 2 occurs at a rate comparable to that of the oxidation of taurine by the TauD-J enzyme intermediate after adjustment for the different temperatures of measurement. Moreover, compared with other S = 2 complexes characterized to date, the spectroscopic properties of 2 most closely resemble those of TauD-J. Together these features make 2 the best electronic and functional model for TauD-J to date.

A chameleon catalyst for nonheme iron-promoted olefin oxidation.

We report the chameleonic reactivity of two nonheme iron catalysts for olefin oxidation with H2O2 that switch from nearly exclusive cis-dihydroxylation of electron-poor olefins to the exclusive epoxidation of electron-rich olefins upon addition of acetic acid. This switching suggests a common precursor to the nucleophilic oxidant proposed to Fe(III)-η(2)-OOH and electrophilic oxidant proposed to Fe(V)(O)(OAc), and reversible coordination of acetic acid as a switching pathway.

Identification of a low-spin acylperoxoiron(III) intermediate in bio-inspired non-heme iron-catalysed oxidations.

Synthetically useful hydrocarbon oxidations are catalysed by bio-inspired non-heme iron complexes using hydrogen peroxide as oxidant, and carboxylic acid addition enhances their selectivity and catalytic efficiency. Talsi has identified a low-intensity g=2.7 electron paramagnetic resonance signal in such catalytic systems and attributed it to an oxoiron(V)-carboxylate oxidant. Herein we report the use of Fe(II)(TPA*) (TPA*=tris(3,5-dimethyl-4-methoxypyridyl-2-methyl)amine) to generate this intermediate in 50% yield, and have characterized it by ultraviolet-visible, resonance Raman, Mössbauer and electrospray ionization mass spectrometric methods as a low-spin acylperoxoiron(III) species. Kinetic studies show that this intermediate is not itself the oxidant but decays via a unimolecular rate-determining step to unmask a powerful oxidant. The latter is shown by density functional theory calculations to be an oxoiron(V) species that oxidises substrate without a barrier. This study provides a mechanistic scenario for understanding catalyst reactivity and selectivity as well as a basis for improving catalyst design.

H2O2 activation with biomimetic non-haem iron complexes and AcOH: connecting the g = 2.7 EPR signal with a visible chromophore.

Mechanistic studies of H2O2 activation by complexes related to [(BPMEN)Fe(II)(CH3CN)2](2+) with electron-rich pyridines revealed that a new intermediate formed in the presence of acetic acid with a 465 nm visible band can be associated with an unusual g = 2.7 EPR signal. We postulate that this chromophore is an acylperoxoiron(III) intermediate.

Rate-determining water-assisted O-O bond cleavage of an Fe(III)-OOH intermediate in a bio-inspired nonheme iron-catalyzed oxidation.

Hydrocarbon oxidations by bio-inspired nonheme iron catalysts and H2O2 have been proposed to involve an Fe(III)-OOH intermediate that decays via a water-assisted mechanism to form an Fe(V)(O)(OH) oxidant. Herein we report kinetic evidence for this pathway in the oxidation of 1-octene catalyzed by [Fe(II)(TPA)(NCCH3)](2+) (1, TPA = tris(2-pyridylmethyl)amine). The (TPA)Fe(III)(OOH) intermediate 2 can be observed at -40 °C and is found to undergo first-order decay, which is accelerated by water. Interestingly, the decay rate of 2 is comparable to that of product formation, indicating that the decay of 2 results in olefin oxidation. Furthermore, the Eyring activation parameters for the decay of 2 and product formation are identical, and both processes are associated with an H2O/D2O KIE of 2.5. Taken together with previous (18)O-labeling data, these results point to a water-assisted heterolytic O-O bond cleavage of 2 as the rate-limiting step in olefin oxidation.

Preparation and C-X reductive elimination reactivity of monoaryl Pd(IV)-X complexes in water (X = OH, OH2, Cl, Br).

Monohydrocarbyl palladium(IV) complexes bearing OH, OH(2), Br, and Cl ligands at the metal and supported by facially chelating 1-hydroxy-1,1-bis(2-pyridyl)methoxide were readily prepared in water at 0 °C. These complexes reductively eliminate Ar-X (X = OH, Br, Cl) in water at room temperature in high yield, and the corresponding first-order rate constants k(OH), k(Cl), and k(Br) are on the same order of magnitude.