Recommendations for Lung Ultrasound in Internal Medicine

A growing amount of evidence prompts us to update the first version of recommendations for lung ultrasound in internal medicine (POLLUS-IM) that was published in 2018. The recommendations were established in several stages, consisting of: literature review, assessment of literature data quality (with the application of QUADAS, QUADAS-2 and GRADE criteria) and expert evaluation carried out consistently with the modified Delphi method (three rounds of on-line discussions, followed by a secret ballot by the panel of experts after each completed discussion). Publications to be analyzed were selected from the following databases: Pubmed, Medline, OVID, and Embase. New reports published as of October 2019 were added to the existing POLLUS-IM database used for the original publication of 2018. Altogether, 528 publications were systematically reviewed, including 253 new reports published between September 2017 and October 2019. The new recommendations concern the following conditions and issues: pneumonia, heart failure, monitoring dialyzed patients' hydration status, assessment of pleural effusion, pulmonary embolism and diaphragm function assessment. POLLUS-IM 2020 recommendations were established primarily for clinicians who utilize lung ultrasound in their everyday clinical work.

A simple, no-cost method for 3D printed model identification.

3D printed models are often very similar in shape and can be inadvertently switched if the related patient is not identified correctly. Here, we present a free and simple method to imprint letters and numbers in a 3D model. CT scan data were used to create an STL file of a patient's mandible. We then used Blender software to modify it with numbers and letters. We chose to imprint a series of four letters and numbers on our 3D models. We chose representative letters and numbers of the Latin alphabet. Six models were printed with an Up plus 2 - easy 120 3D printer with different character sizes and shape to evaluate the readability. All models were printed without any failures. Regarding readability, 2 mistakes were made among ten readers. The favourite extrusion depth was 3 mm, and the largest model was preferred. Identification can be done at different times and by different means, but identifying the 3D model during its creation is safer. Moreover these identified 3D models could be saved in the digital patient medical file. The identification location should take into consideration the future indication of the 3D printed medical model. We recommend that 3D identification should be done using at least 7.5mm high, with a depth of 3mm. Our method allows easy, fast and free 3D text. This 3D text identification printing method may be a first step towards the legal use of 3D printed models made within the hospital.

Reproducibility of three-dimensional posterior cranial base angles using low-dose computed tomography.

OBJECTIVES: One of the key aspects of three-dimensional (3D) craniofacial cephalometry is the measurement of posterior cranial base angle as this area is deeply involved in craniofacial development. The purpose of our retrospective study was to define the best reproducible 3D posterior cranial base angles among five 3D angles transposed from 2D cephalometry (Cousin, BL1 of Ross and Ravosa, Bjork, Delaire, CBA4 of Liberman) and seven 3D angles based on physical anthropology studies and on new concepts (R1 to R7). The null hypothesis was that all 3D posterior cranial base angles were equally reproducible. MATERIAL AND METHODS: We used a preoperative low-dose computed tomography (CT) data from 20 adult patients undergoing orthognathic surgery after approval by local ethical committee. Two independent observers performed two series of 23 3D landmark identifications on 3D CT surface rendering of each patient using Maxilim software. Then, the same observers performed twice 3D cephalometric analyses (23 landmarks, 4 midpoints, 19 planes) that provided the automatic measurement of 12 posterior cranial base angles. RESULTS: Inter-observer correlation coefficient varied from 0.545 (Cousin) to 0.695 (CBA4 of Liberman) and from -0.177 (R2) to 0.827 (R4). CONCLUSIONS: The null hypothesis was rejected. The most reproducible angle was 3D angle R4 based on "basion," "superior optic" (right, left), and "crista galli inferior" landmarks. CLINICAL RELEVANCE: R4 angle might be used as reference 3D posterior cranial base angle in further clinical studies involving 3D cephalometry as a diagnostic tool for orthodontics and for orthognathic surgery.

Preoperative, intraoperative, and postoperative complications in orthognathic surgery: a systematic review.

OBJECTIVES: The aim of this study was to determine whether orthognathic surgery is associated with any complications, and what type of complications may occur. MATERIALS AND METHODS: Data were obtained using PubMed (MEDLINE), ISI Web of Knowledge, Ovid, Cochrane Library, Embase Library, and an additional manual search. The titles and abstracts of the electronic search results were screened and evaluated by two observers for eligibility according to the inclusion and exclusion criteria. RESULTS: A total of 1924 articles were identified, and we retained 44 articles for the final analysis. The Prisma diagram flowchart demonstrates our selection scheme. For the purpose of this study, the Cochrane data extraction form was modified. One review author extracted data from the included studies, and the second author checked all of the forms. The hierarchy of evidence classification from the UK NHS Centre for Reviews and Dissemination was used to assess the level of evidence for the retrieved studies. CONCLUSIONS: An evaluation of the obtained studies revealed the existence of a large number of varied complications associated with orthognathic surgery procedures. CLINICAL RELEVANCE: Oral and maxillofacial surgeons, orthodontists, and the surgical team need to prevent such complications during preoperative, intraoperative, and postoperative periods to increase the safety of orthognathic surgery procedures. This review was registered on http://www.crd.york.ac.uk/PROSPERO as CRD42013004711.

Experimental and clinical assessment of three-dimensional cephalometry: a systematic review.

OBJECTIVES: This study provides a systematic review of the current scientific literature on three-dimensional (3D) cephalometry. The null hypothesis was that 3D cephalometry is an accurate and reproducible diagnostic technique. To examine this hypothesis, the following three research questions were proposed: 1) What is the accuracy of 3D cephalometric measurements compared to in vitro measurements? 2) What is the intra- and inter-observer reliability of the selection of 3D cephalometric landmarks? 3) What is the reproducibility of the linear and angular measurements? METHODS: A comprehensive database search was performed, using Medline, the Cochrane Central Register of Controlled Trials, Web of Science and Google Scholar. The titles and abstracts obtained from the search were screened and evaluated by two observers according to the inclusion and exclusion criteria. RESULTS: The evaluation process yielded 21 articles. A high level of agreement (<1 mm) between the in vitro measurements and those obtained from 3D cephalometry was observed and some landmarks provided highly reproducible results. However, the linear (0.04-7.49 mm) and angular (0.99-9.30°) measurements differed greatly. CONCLUSIONS: The null hypothesis was rejected. This study indicates critical points regarding 3D cephalometry and provides guidance for future research in this field.

Shape and volume of craniofacial cavities in intentional skull deformations.

Intentional cranial deformations (ICD) have been observed worldwide but are especially prevalent in preColombian cultures. The purpose of this study was to assess the consequences of ICD on three cranial cavities (intracranial cavity, orbits, and maxillary sinuses) and on cranial vault thickness, in order to screen for morphological changes due to the external constraints exerted by the deformation device. We acquired CT-scans for 39 deformed and 19 control skulls. We studied the thickness of the skull vault using qualitative and quantitative methods. We computed the volumes of the orbits, of the maxillary sinuses, and of the intracranial cavity using haptic-aided semi-automatic segmentation. We finally defined 3D distances and angles within orbits and maxillary sinuses based on 27 anatomical landmarks and measured these features on the 58 skulls. Our results show specific bone thickness patterns in some types of ICD, with localized thinning in regions subjected to increased pressure and thickening in other regions. Our findings confirm that volumes of the cranial cavities are not affected by ICDs but that the shapes of the orbits and of the maxillary sinuses are modified in circumferential deformations. We conclude that ICDs can modify the shape of the cranial cavities and the thickness of their walls but conserve their volumes. These results provide new insights into the morphological effects associated with ICDs and call for similar investigations in subjects with deformational plagiocephalies and craniosynostoses.

Reproducibility of three-dimensional cephalometric landmarks in cone-beam and low-dose computed tomography.

OBJECTIVES: The purpose of this study is to compare the reproducibility of three-dimensional cephalometric landmarks on three-dimensional computed tomography (3D-CT) surface rendering using clinical protocols based on low-dose (35-mAs) spiral CT and cone-beam CT (I-CAT). The absorbed dose levels for radiosensitive organs in the maxillofacial region during exposure in both 3D-CT protocols were also assessed. MATERIALS AND METHODS: The study population consisted of ten human dry skulls examined with low-dose CT and cone-beam CT. Two independent observers identified 24 cephalometric anatomic landmarks at 13 sites on the 3D-CT surface renderings using both protocols, with each observer repeating the identification 1 month later. A total of 1,920 imaging measurements were performed. Thermoluminescent dosimeters were placed at six sites around the thyroid gland, the submandibular glands, and the eyes in an Alderson phantom to measure the absorbed dose levels. RESULTS: When comparing low-dose CT and cone-beam CT protocols, the cone-beam CT protocol proved to be significantly more reproducible for four of the 13 anatomical sites. There was no significant difference between the protocols for the other nine anatomical sites. Both low-dose and cone-beam CT protocols were equivalent in dose absorption to the eyes and submandibular glands. However, thyroid glands were more irradiated with low-dose CT. CONCLUSIONS: Cone-beam CT was more reproducible and procured less irradiation to the thyroid gland than low-dose CT. CLINICAL RELEVANCE: Cone-beam CT should be preferred over low-dose CT for developing three-dimensional bony cephalometric analyses.

NAAG peptidase inhibitors block cognitive deficit induced by MK-801 and motor activation induced by d-amphetamine in animal models of schizophrenia.

The most widely validated animal models of the positive, negative and cognitive symptoms of schizophrenia involve administration of d-amphetamine or the open channel NMDA receptor blockers, dizocilpine (MK-801), phencyclidine (PCP) and ketamine. The drug ZJ43 potently inhibits glutamate carboxypeptidase II (GCPII), an enzyme that inactivates the peptide transmitter N-acetylaspartylglutamate (NAAG) and reduces positive and negative behaviors induced by PCP in several of these models. NAAG is an agonist at the metabotropic glutamate receptor 3 (mGluR3). Polymorphisms in this receptor have been associated with expression of schizophrenia. This study aimed to determine whether two different NAAG peptidase inhibitors are effective in dopamine models, whether their efficacy was eliminated in GCPII knockout mice and whether the efficacy of these inhibitors extended to MK-801-induced cognitive deficits as assessed using the novel object recognition test. ZJ43 blocked motor activation when given before or after d-amphetamine treatment. (R,S)-2-phosphono-methylpentanedioic acid (2-PMPA), another potent NAAG peptidase inhibitor, also reduced motor activation induced by PCP or d-amphetamine. 2-PMPA was not effective in GCPII knockout mice. ZJ43 and 2-PMPA also blocked MK-801-induced deficits in novel object recognition when given before, but not after, the acquisition trial. The group II mGluR antagonist LY341495 blocked the effects of NAAG peptidase inhibition in these studies. 2-PMPA was more potent than ZJ43 in a test of NAAG peptidase inhibition in vivo. By bridging the dopamine and glutamate theories of schizophrenia with two structurally different NAAG peptidase inhibitors and demonstrating their efficacy in blocking MK-801-induced memory deficits, these data advance the concept that NAAG peptidase inhibition represents a potentially novel antipsychotic therapy.

Innovative procedure for computer-assisted genioplasty: three-dimensional cephalometry, rapid-prototyping model and surgical splint.

The authors present a new procedure of computer-assisted genioplasty. They determined the anterior, posterior and inferior limits of the chin in relation to the skull and face with the newly developed and validated three-dimensional cephalometric planar analysis (ACRO 3D). Virtual planning of the osteotomy lines was carried out with Mimics (Materialize) software. The authors built a three-dimensional rapid-prototyping multi-position model of the chin area from a medical low-dose CT scan. The transfer of virtual information to the operating room consisted of two elements. First, the titanium plates on the 3D RP model were pre-bent. Second, a surgical guide for the transfer of the osteotomy lines and the positions of the screws to the operating room was manufactured. The authors present the first case of the use of this model on a patient. The postoperative results are promising, and the technique is fast and easy-to-use. More patients are needed for a definitive clinical validation of this procedure.

Accuracy of three-dimensional (3D) craniofacial cephalometric landmarks on a low-dose 3D computed tomograph.

OBJECTIVES: The aim of this paper is to compare the accuracy of cephalometric landmark identification using three-dimensional CT (3D-CT) surface rendering with "high-dose" (200 mAs) and "low-dose" (35 mAs) CT protocols. The absorbed dose levels for radiosensitive organs in the maxillofacial region during the exposure for both 3D-CT protocols were also measured. METHODS: The study population consisted of 15 human dry skulls examined with spiral 3D-CT. 12 cephalometric anatomical landmarks at 7 sites were identified on the 3D-CT surface renderings by 2 observers independently, twice each, using high-dose and low-dose protocols. In total, 1440 imaging measurements were made. Thermoluminescent dosemeters (TLDs) were placed at ten sites around the thyroid and submandibular glands and the eyes in an Alderson phantom for measuring the absorbed dose levels. RESULTS: The intraobserver mean distances between 3D landmarks were smaller for all sites with the high-dose protocol (P = 0.37). There was a significant difference among the observers (P = 0.000004). Interobserver mean distances between 3D landmarks were smaller for four of the seven sites with the low-dose protocol. However, the global interobserver mean distances between 3D landmarks for all sites were smaller with the high-dose protocol (P = 0.028). The low-dose protocol reduced the radiation dose to the thyroid by 6.12, to the submandibular salivary glands by 5.91 and to the eye by 5.44, resulting in a global reduction factor of 5.71. CONCLUSIONS: The accuracy in the landmark's identification was maintained when the milliampere-second values were reduced from 200 mAs to 35 mAs. We recommend use of the low-dose protocol for clinical 3D-CT cephalometric applications.

Communicating a clinical problem to the engineers: towards a common methodology.

The purpose of this article is to present a method for communicating a clinical problem to a group of engineers. The seven-step design process described has been used for this type of communication and audience. A research project focusing on improvement of orthognathic surgery planning, including transfer of information to the operating room, is used as an example. The adoption of the seven-step design process, positioned within the symmetrical problem/solution model, could be the first step in facilitating communication between clinicians and engineers in translational research, and assisting in group focus on the development of a device (system) intended to solve a specific clinical problem.

Three-dimensional computed tomography cephalometric craniofacial analysis: experimental validation in vitro.

The development of three-dimensional (3D) cephalometric analysis is essential for the computer-assisted planning of orthognathic surgery. The aim of this study was to transform and adapt Delaire's two-dimensional cephalometric analysis into the third dimension; this transposition was then validated. The comparative advantage of using 3D computed tomography (CT) surface renderings over profile X-rays was analysed. Comparison was made of inter- and intra-observer reproducibility of the cephalometric measurements done on profile X-rays and on 3D CT surface renderings on the same 26 dry skulls. The accuracy was also tested of the measurements done on 3D CT surface renderings (ACRO 3D) in relation to those directly taken on dry skulls with the help of a 3D measuring instrument. Inter- and intra-observer reproducibility proved significantly superior (p<0.0001) following the 3D CT method. There were no significant differences in the accuracy of measurements between the ACRO 3D software and the 3D measuring instrument. The ACRO 3D software was confirmed as being a reliable tool for developing 3D CT cephalometric analyses. Further research may entail clinical validation of the 3D CT craniofacial cephalometric method of analysis.

3D CT-based cephalometric analysis: 3D cephalometric theoretical concept and software.

INTRODUCTION: We present an original three-dimensional cephalometric analysis based on a transformation of a classical two dimensional topological cephalometry. METHODS: To validate the three-dimensional cephalometric CT based concept we systematically compared the alignments of anatomic structures. We used digital lateral radiography to perform the classical two-dimensional cephalometry, and a three-dimensional CT surface model for the three-dimensional cephalometry. RESULTS: Diagnoses based on both two-dimensional and three-dimensional analyses were adequate, but the three-dimensional analysis gave more information such as the possibility of comparing the right and left side of the skull. Also the anatomic structures were not superimposed which improved the visibility of the reference landmarks. CONCLUSION: We demonstrated that three-dimensional analysis gives the same results as two-dimensional analysis using the same skull. We also present possible applications of the method.

[Evaluation of some selected structural and functional parameters of red blood cells as oxidative stress markers in elderly people]. / Ocena wybranych parametrów strukturalnych i czynnosciowych krwinek czerwonych jako markerów stresu oksydacyjnego u osób w wieku podeszlym.

UNLABELLED: The ageing process induces age-related involutionary changes and leads to increased occurrence of many diseases. One of the most important theories of ageing and development of many pathologies is the free radical theory, which assumes that ageing process leads to lost of oxidative balance. THE AIM: of the research was to evaluate the degree of membrane lipid peroxidation, internal microviscosity, activity of membrane ATPase, both total and Na(+)K(+)-dependent, and markers of oxidative damage in erythrocyte membrane protein in elderly people. MATERIAL: The examination was performed on 35 people. The examined group (15 persons, mean age 71,3) consisted of healthy elderly people. The reference group was formed with younger healthy people (20 persons, mean age 55). RESULTS: Erythrocyte membrane lipid peroxidation was found stronger in the group of elderly people. Erythrocyte internal microviscosity was significantly higher in the elderly. The activity of ATPase, both total and Na(+)K(+)-dependent, appeared remarkably greater in the group of younger people. Stronger membrane lipid damage was observed in older age group, which may be implied by lower--SH group concentration, and higher W/S parameter value. CONCLUSION: The obtained results reveal that in elderly people the intensification of oxidative stress in the entire body occurs, which may be confirmed by structural and functional oxidative erythrocyte damage. This conclusion may be significant for pathogenesis of many diseases in this period of life.

[Limitations of orthognathic model surgery: theoretical and practical implications]. / Les limites de la chirurgie des modèles en chirurgie orthognathique: implications théoriques et pratiques.

Orthognathic model surgery is a classical technique used to simulate orthognathic surgical cases. However, a detailed analysis of this technique demonstrates that theoretical errors and inaccuracies can occur in routine practice. 2D and 3D cephalometric analysis is the first source of inaccuracies. Then, during the occlusal plane transfer from the patient to the semi-adjustable dental articulator, errors can occur by inaccurate manipulation of the facial bow. Simulating the operation on the plaster cast is difficult due to the lack of a real link between the cephalometric analysis and the model surgery. Rotation and translation movements of the plaster casts are insufficiently controlled during the model surgery stage. Finally, the splint, which transfers the final relative position of maxilla to the mandible, summates all of the errors of the previous stages.

[Maxillo-facial surgery in the future, interdisciplinary innovation for medicine]. / Chirurgie maxillo-faciale du futur, l'innovation interdisciplinaire au service de la médecine.

The computer assisted craniomaxillofacial surgery (CAS-CMFS) is an emergent scientific domain in interaction between maxillofacial surgery, three dimensional CT imaging and remote signal engineering. The different stages to develop a synergy between these scientific areas are presented on example of the HEROL project (2002-2006, Region Wallonne grant). The 3D cephalometric analysis is made first with an original ACRO 3D software. Then, the craniomaxillofacial surgery preoperative planning, using 3D informations from ACRO 3D, is performed with ACROSIM 3D software. The major information concerning craniomaxillofacial surgery (incisions, nerve visualization, osteotomy lines visualization, ostheosynthesis position visualization) are transmitted from the virtual word (ACRO 3D & ACROSIM 3D), through the augmented reality (AR) head-mounted display, to the operating theatre. This study describes the HEROL project real advancement and future potential applications of AR in surgery.

Removing a barrier to computer-based outbreak and disease surveillance--the RODS Open Source Project.

INTRODUCTION: Computer-based outbreak and disease surveillance requires high-quality software that is well-supported and affordable. Developing software in an open-source framework, which entails free distribution and use of software and continuous, community-based software development, can produce software with such characteristics, and can do so rapidly. OBJECTIVES: The objective of the Real-Time Outbreak and Disease Surveillance (RODS) Open Source Project is to accelerate the deployment of computer-based outbreak and disease surveillance systems by writing software and catalyzing the formation of a community of users, developers, consultants, and scientists who support its use. METHODS: The University of Pittsburgh seeded the Open Source Project by releasing the RODS software under the GNU General Public License. An infrastructure was created, consisting of a website, mailing lists for developers and users, designated software developers, and shared code-development tools. These resources are intended to encourage growth of the Open Source Project community. Progress is measured by assessing website usage, number of software downloads, number of inquiries, number of system deployments, and number of new features or modules added to the code base. RESULTS: During September--November 2003, users generated 5,370 page views of the project website, 59 software downloads, 20 inquiries, one new deployment, and addition of four features. CONCLUSIONS: Thus far, health departments and companies have been more interested in using the software as is than in customizing or developing new features. The RODS laboratory anticipates that after initial installation has been completed, health departments and companies will begin to customize the software and contribute their enhancements to the public code base.

Reduced susceptibility to collagen-induced arthritis in DBA/1J mice expressing the TSG-6 transgene.

OBJECTIVE: Expression of TSG-6 (tumor necrosis factor-stimulated gene 6) is induced by proinflammatory cytokines. This study was undertaken to examine the effects of local expression of TSG-6 in arthritic joints of TSG-6 transgenic mice, in the collagen-induced arthritis (CIA) model. METHODS: We generated transgenic mice that harbored the TSG-6 gene under the control of the T cell-specific lck promoter. Arthritis was induced by immunization with bovine type II collagen (CII), and its progression was monitored based on the incidence of arthritis, the arthritis index, and footpad swelling. Anti-CII antibodies and cytokine production were determined by enzyme-linked immunosorbent assay. Gene expression arrays were used to compare gene expression profiles of transgenic and control mice at various stages of CIA. RESULTS: TSG-6 was expressed in limbs of transgenic mice after immunization with CII, while its expression in nontransgenic animals was insignificant. The incidence of CIA was reduced in TSG-6 transgenic animals, its onset delayed, and all parameters of clinical arthritis significantly reduced. However, the immune response against CII was not significantly inhibited in TSG-6 transgenic mice. CONCLUSION: TSG-6 expression has been demonstrated in patients with rheumatoid and other forms of arthritis. Our data show that local expression of TSG-6 at sites of inflammation results in potent inhibition of inflammation and joint destruction in a model of autoimmune arthritis in mice. Therefore, it is likely that TSG-6 plays a similar modulatory role in human rheumatoid arthritis and related diseases and may have potential for the treatment of autoimmune arthritis in humans.

Stimulation of neutrophil activation during coronary artery bypass grafting: comparison of crystalloid and blood cardioplegia.

BACKGROUND: During myocardial ischemia, activation of polymorphonuclear neutrophils (PMNs) results in the production of free oxygen radicals, which increase myocardial injury. It has been shown that PMNs also produce nitric oxide. It is not clear whether PMNs become activated as a result of their direct contact with ischemic/reperfused myocardium or if PMN activation and free oxygen radical production are effects of specific stimuli released during coronary artery bypass grafting (CABG). The aim of the current study was to evaluate plasma-mediated neutrophil stimulation and production of superoxide anion (O2) and nitric oxide in patients undergoing CABG, and to verify whether crystalloid and blood cardioplegia can modify such stimulation. METHODS: Coronary sinus, peripheral arterial, and venous plasma samples were collected from 50 patients who underwent CABG and were divided into 2 equal groups which received either crystalloid or blood cardioplegia: directly before myocardial ischemia and aortic cross-clamping; at the beginning of reperfusion after aortic clamp release; and 30 minutes after reperfusion. O2 and nitric oxide production by PMN was evaluated by standard methods. RESULTS: There was a significant (p < 0.05) increase in O2 production by PMN incubated with plasma obtained from the coronary sinus immediately after reperfusion in patients receiving crystalloid cardioplegia compared to blood cardioplegia. No difference was observed in plasma stimulation of nitric oxide production by PMN in the 2 groups of patients at different times during the procedure. CONCLUSIONS: Cardioplegia may affect release of neutrophil-oriented stimuli from ischemic myocardium and modify neutrophil activation during coronary artery bypass grafting.

[Fibrinogen serum levels in patients with stable coronary artery disease and acute coronary syndrome]. / Stezenie fibrynogenu w surowicy chorych ze stabilna choroba wiencowa i ostrym zespolem wiencowym.

Increased plasma fibrinogen level is an important prognostic factor of recurrent unstable angina and myocardial infarction in patients with acute coronary syndrome (ACS). The aim of our study was to assess the plasma fibrinogen level at baseline condition in patients admitted to hospital due to coronary artery disease (CAD). Plasma fibrinogen was measured in 51 consecutive patients presenting with ACS within the last 24 hours and in 50 patients with angiographically proven CAD that was stable for the past 30 days. For statistical analysis Mann-Whitney U test, Student t-test, chi-square test and Pearson correlation was used, p < 0.05 being considered statistically significant. There was significant correlation between fibrinogen level and diagnosis of ACS or CAD (r = 0.29, p = 0.002). In our population plasma fibrinogen levels (g/L +/- SD) were significantly different in patients with ACS when compared to CAD subjects (3.87 +/- 1.2 vs. 3.26 +/- 0.65, p = 0.002). There was difference between ACS and CAD subjects in male:female ratio (40/11 vs. 47/4, p < 0.001) and age (63.4 +/- 10.1 vs. 58.4 +/- 10.0, p = 0.014). Our results confirm the role of fibrinogen in pathogenesis of CAD. In our opinion plasma fibrinogen level may be an important diagnostic tool in assessment of patients with chest pain.