Biostimulation of sulfate reduction for in-situ metal(loid) precipitation at an industrial site in Flanders, Belgium.

A 30-month pilot study was conducted to evaluate the potential of in-situ metal(loid) removal through biostimulation of sulfate-reducing processes. The study took place at an industrial site in Flanders, Belgium, known for metal(loid) contamination in soil and groundwater. Biostimulation involved two incorporations of an organic substrate (emulsified vegetable oil) as electron donor and potassium bicarbonate to raise the pH of the groundwater by 1-1.5 units. The study focused on the most impacted permeable fine sand aquifer (8-9 m below groundwater level) confined by layers of non-permeable clay. The fine sands exhibited initially oxic conditions (50-200 mV), an acidic pH of 4.5 and sulfate concentrations ranging from 600 to 800 mg/L. At the central monitoring well, anoxic conditions (-200 to -400 mV) and a pH of 5.9 established shortly after the second substrate and reagent injection. Over the course of 12 months, there was a significant decrease in the concentration of arsenic (from 2500 to 12 µg/L), nickel (from 360 to <2 µg/L), zinc (from 78,000 to <2 µg/L), and sulfate (from 930 to 450 mg/L). Low levels of metal(loid)s were still present after 34 months (end of study). Mineralogical analysis indicated that the precipitates formed were amorphous in nature. Evidence for biologically driven metal(loid) precipitation was provided by compound specific stable isotope analysis of sulfate. In addition, changes in microbial populations were assessed using next-generation sequencing, revealing stimulation of native sulfate-reducing bacteria. These results highlight the potential of biostimulation for long-term in situ metal(loid) plume treatment/containment.

Multiple Technology Approach Based on Stable Isotope Ratio Analysis, Fourier Transform Infrared Spectrometry and Thermogravimetric Analysis to Ensure the Fungal Origin of the Chitosan.

Chitosan is a natural polysaccharide which has been authorized for oenological practices for the treatment of musts and wines. This authorization is limited to chitosan of fungal origin while that of crustacean origin is prohibited. To guarantee its origin, a method based on the measurement of the stable isotope ratios (SIR) of carbon δ13C, nitrogen δ15N, oxygen δ18O and hydrogen δ2H of chitosan has been recently proposed without indicating the threshold authenticity limits of these parameters which, for the first time, were estimated in this paper. In addition, on part of the samples analysed through SIR, Fourier transform infrared spectrometry (FTIR) and thermogravimetric analysis (TGA) were performed as simple and rapid discrimination methods due to limited technological resources. Samples having δ13C values above -14.2‱ and below -125.1‱ can be considered as authentic fungal chitosan without needing to analyse other parameters. If the δ13C value falls between -25.1‱ and -24.9‱, it is necessary to proceed further with the evaluation of the parameter δ15N, which must be above +2.7‱. Samples having δ18O values lower than +25.3‱ can be considered as authentic fungal chitosan. The combination of maximum degradation temperatures (obtained using TGA) and peak areas of Amide I and NH2/Amide II (obtained using FTIR) also allows the discrimination between the two origins of the polysaccharide. Hierarchical cluster analysis (HCA) and principal component analysis (PCA) based on TGA, FTIR and SIR data successfully distributed the tested samples into informative clusters. Therefore, we present the technologies described as part of a robust analytical strategy for the correct identification of chitosan samples from crustaceans or fungi.

Copper(II) and Cobalt(II) Complexes Based on Abietate Ligands from Pinus Resin: Synthesis, Characterization and Their Antibacterial and Antiviral Activity against SARS-CoV-2.

Co-abietate and Cu-abietate complexes were obtained by a low-cost and eco-friendly route. The synthesis process used Pinus elliottii resin and an aqueous solution of CuSO4/CoSO4 at a mild temperature (80 °C) without organic solvents. The obtained complexes are functional pigments for commercial architectural paints with antipathogenic activity. The pigments were characterized by Fourier-transform infrared spectroscopy (FTIR), mass spectrometry (MS), thermogravimetry (TG), near-edge X-ray absorption fine structure (NEXAFS), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and colorimetric analysis. In addition, the antibacterial efficiency was evaluated using the minimum inhibitory concentration (MIC) test, and the antiviral tests followed an adaptation of the ISO 21702:2019 guideline. Finally, virus inactivation was measured using the RT-PCR protocol using 10% (w/w) of abietate complex in commercial white paint. The Co-abietate and Cu-abietate showed inactivation of >4 log against SARS-CoV-2 and a MIC value of 4.50 µg·mL-1 against both bacteria Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The results suggest that the obtained Co-abietate and Cu-abietate complexes could be applied as pigments in architectural paints for healthcare centers, homes, and public places.

Antiviral Properties against SARS-CoV-2 of Nanostructured ZnO Obtained by Green Combustion Synthesis and Coated in Waterborne Acrylic Coatings.

The COVID-19 pandemic has increased the need for developing disinfectant surfaces as well as reducing the spread of infections on contaminated surfaces and the contamination risk from the fomite route. The present work reports on the antiviral activity of coatings containing ZnO particles obtained by two simple synthesis routes using Aloe vera (ZnO-aloe) or cassava starch (ZnO-starch) as reaction fuel. After detailed characterization using XRD and NEXAFS, the obtained ZnO particles were dispersed in a proportion of 10% with two different waterborne acrylic coatings (binder and commercial white paint) and brushed on the surface of polycarbonates (PC). The cured ZnO/coatings were characterized by scanning electron microscopes (SEM) and energy-dispersive X-ray spectroscopy (EDS). Wettability tests were performed. The virucidal activity of the ZnO particles dispersed in the waterborne acrylic coating was compared to a reference control sample (PC plates). According to RT-PCR results, the ZnO-aloe/coating displays the highest outcome for antiviral activity against SARS-CoV-2 using the acrylic binder, inactivating >99% of the virus after 24 h of contact relative to reference control.

"Commandeuring" Xenobiotic Metabolism: Advances in Understanding Xenobiotic Metabolism.

The understanding of how exogenous chemicals (xenobiotics) are metabolized, distributed, and eliminated is critical to determine the impact of the chemical and its metabolites to the (human) organism. This is part of the research and educational discipline ADMET (absorption, distribution, metabolism, elimination, and toxicity). Here, we review the work of Jan Commandeur and colleagues who have not only made a significant impact in understanding of phase I and phase II metabolism of several important compounds but also contributed greatly to the development of experimental techniques for the study of xenobiotic metabolism. Jan Commandeur's work has covered a broad area of research, such as the development of online screening methodologies, the use of a combination of enzyme mutagenesis and molecular modeling for structure-activity relationship (SAR) studies, and the development of novel probe substrates. This work is the bedrock of current activities and brings the field closer to personalized (cohort-based) pharmacology, toxicology, and hazard/risk assessment.

Study of the Production of Poly(Hydroxybutyrate-co-Hydroxyhexanoate) and Poly(Hydroxybutyrate-co-Hydroxyvalerate-co-Hydroxyhexanoate) in Rhodospirillum rubrum.

Poly(hydroxybutyrate-co-hydroxyhexanoate) [P(HB-co-HHx)] and poly(hydroxybutyrate-co-hydroxyvalerate-co-hydroxyhexanoate) [P(HB-co-HV-co-HHx)] demonstrate interesting mechanical and thermal properties as well as excellent biocompatibility, making them suitable for multiple applications and notably biomedical purposes. The production of such polymers was described in Rhodospirillum rubrum, a purple nonsulfur bacteria in a nutrient-lacking environment where the HHx synthesis is triggered by the presence of hexanoate in the medium. However, the production of P(HB-co-HHx) under nutrient-balanced growth conditions in R. rubrum has not been described so far, and the assimilation of hexanoate is poorly documented. In this study, we used proteomic analysis and a mutant fitness assay to demonstrate that hexanoate assimilation involve ß-oxidation and the ethylmalonyl-coenzyme A (CoA) (EMC) and methylbutanoyl-CoA (MBC) pathways, both being anaplerotic pathways already described in R. rubrum. Polyhydroxyalkanoate (PHA) production is likely to involve the de novo fatty acid synthesis pathway. Concerning the polymer composition, HB is the main component of the polymer, probably as acetyl-CoA and butyryl-CoA are intermediates of hexanoate assimilation pathways. When no essential nutrient is lacking in the medium, the synthesis of PHA seems to help maintain the redox balance of the cell. In this framework, we showed that the fixation of CO2 is required to sustain the growth. An increase in the proportion of HHx in the polymer was observed when redox stress was engendered in the cell under bicarbonate-limiting growth conditions. The addition of isoleucine or valerate in the medium also increased the HHx content of the polymer and allowed the production of a terpolymer of P(HB-co-HV-co-HHx). IMPORTANCE The use of purple bacteria, which can assimilate volatile fatty acids, for biotechnological applications has increased, since they reduce the production costs of added-value compounds such as PHA. P(HB-co-HHx) and P(HB-co-HV-co-HHx) have demonstrated interesting properties, notably for biomedical applications. In a nutrient-lacking environment, R. rubrum is known to synthesize such polymers when hexanoate is used as the carbon source. However, their production in R. rubrum in non-nutrient-lacking growth conditions has not been described so far, and the assimilation of hexanoate is poorly documented. As the carbon source and its assimilation directly impact the polymer composition, we studied under non-nutrient-lacking growth conditions the assimilation pathway of hexanoate and PHA production in R. rubrum. Proteomic analysis and mutant fitness assays allowed us to explain PHA production and composition. An increase in HHx content of the polymer and production of P(HB-co-HV-co-HHx) was possible using the knowledge gained on metabolism under hexanoate growth conditions.

Effects of Mixing Volatile Fatty Acids as Carbon Sources on Rhodospirillum rubrum Carbon Metabolism and Redox Balance Mechanisms.

Rhodospirillum rubrum has a versatile metabolism, and as such can assimilate a broad range of carbon sources, including volatile fatty acids. These carbon sources are gaining increasing interest for biotechnological processes, since they reduce the production costs for numerous value-added compounds and contribute to the development of a more circular economy. Usually, studies characterizing carbon metabolism are performed by supplying a single carbon source; however, in both environmental and engineered conditions, cells would rather grow on mixtures of volatile fatty acids (VFAs) generated via anaerobic fermentation. In this study, we show that the use of a mixture of VFAs as carbon source appears to have a synergy effect on growth phenotype. In addition, while propionate and butyrate assimilation in Rs. rubrum is known to require an excess of bicarbonate in the culture medium, mixing them reduces the requirement for bicarbonate supplementation. The fixation of CO2 is one of the main electron sinks in purple bacteria; therefore, this observation suggests an adaptation of both metabolic pathways used for the assimilation of these VFAs and redox homeostasis mechanism. Based on proteomic data, modification of the propionate assimilation pathway seems to occur with a switch from a methylmalonyl-CoA intermediate to the methylcitrate cycle. Moreover, it seems that the presence of a mixture of VFAs switches electron sinking from CO2 fixation to H2 and isoleucine production.

Decolorization, cytotoxicity, and genotoxicity reduction during a combined ozonation/fungal treatment of dye-contaminated wastewater.

In view of compliance with increasingly stringent environmental legislation imposed by regional, national, and supranational (e.g., European Union) authorities, innovative environmental technologies for the treatment of dye-contaminated effluents are necessary in the color industry. In this study, effluents of an industrial dye producer were subjected to distinct treatment trains following an initial qualitative characterization. The effectiveness of ozonation and a treatment using white rot fungi (WRF) and their enzymes were compared with respect to parameters such as residual color, toxicity on human cells, and genotoxicity. A combined ozonation/WRF process was also investigated. The effluent exhibited significant toxicity that was reduced by only 10% through ozonation, whereas the fungal treatment achieved a 35% reduction. A combined treatment (ozone/WRF) caused an abatement of the toxicity by more than 70%. In addition, the initial genotoxicity of the effluent was still present after the ozone treatment, while it was completely removed through the fungal treatment.

Comparative cytotoxicity of N-substituted N'-(4-imidazole-ethyl)thiourea in precision-cut rat liver slices.

In order to more rationally design thiourea-containing drugs and drug candidates, specifically thiourea-containing histamine H3 receptor antagonists, it is necessary to develop structure-toxicity relationships (STRs). For this purpose, the cytotoxicity of a series of thiourea-containing compounds was tested in precision-cut rat liver slices. A concentration of 1000 microM of N-p-bromophenyl, N'-(4-imidazole-ethyl)thiourea (8) or N-p-nitrophenyl, N'-(4-imidazole-ethyl)thiourea (9) was found to cause cytotoxicity, evidenced as LDH leakage, resulting in more than 95% LDH leakage after 6h. N-p-Methoxyphenyl, N'-(4-imidazole-ethyl)thiourea (6) caused 40.6 +/- 19.7% LDH leakage after 6h. Control levels of cell death (1% methanol as control vehicle) were below 20% in 6h. After 6h of exposure, N-p-chlorophenyl, N'-(4-imidazole-ethyl)thiourea (7), 8, and 9 were already found to cause significant cytotoxicity at a concentration of 100 microM. At 200 microM, 9 was found to cause significantly more cytotoxicity than 7 and 8. N-Naphthyl, N'-(4-imidazole-ethyl)thiourea (12) was found to cause significant cytotoxicity towards precision-cut rat liver slices after 6h of exposure to a concentration of 500 microM. All other N-substituted, N'-(4-imidazole-ethyl)thiourea tested in this study were not found to be cytotoxic towards precision-cut rat liver slices within the 6h of exposure up to a concentration of 1000 microM. Intracellular glutathione (GSH) content and mitochondrial MTT reduction activity were also examined after exposure of slices to N-substituted, N'-(4-imidazole-ethyl)thiourea. Both of these markers, however, were not found to provide additional information regarding the possible mechanisms of cytotoxicity, i.e. GSH depletion or reduced mitochondrial activity since these markers did not clearly precede LDH leakage. A correlation was found between cytotoxicity towards precision-cut rat liver slices and Vmax/Km values for the formation of sulfenic acids from N-substituted N'-(4-imidazole-ethyl)thiourea by hepatic rat flavin-containing monooxygenases (FMO). The compound with the highest Vmax/Km value for the formation of sulfenic acids, 9, was also the most cytotoxic. Compounds with a significantly lower Vmax/Km value, 7, 8, and 12, were less cytotoxic than 9. Compounds with a Vmax/Km value for the formation of sulfenic acids lower than 0.0788 ml/(minmg) were found not to be cytotoxic towards precision-cut rat liver slices for concentrations up to 1000 microM at an exposure time of 6h. It is concluded, from this study, that N-phenyl substituted N'-(4-imidazole-ethyl)thiourea-containing electron-withdrawing p-substituents are cytotoxic towards precision-cut rat liver slices. Cytotoxicity is increased with increasing electron-withdrawing capacity of the p-substituent. A correlation was found to exist between Vmax/Km value for the formation of sulfenic acids by rat liver FMO enzymes and cytotoxicity.

Physicochemical properties and transport of steroids across Caco-2 cells.

PURPOSE: The purpose of this work was to study the relevant physicochemical properties for the absorption of steroids. METHODS: Various physicochemical properties of steroids were calculated (molecular weight, ClogP, static polar surface area [PSA], etc.). Within this series of steroids, different pharmacological groups were defined. Based on the outcome of this survey, steroids were selected for the Caco-2 permeability study. The apparent permeability coefficients (Papp) were related to the calculated and measured physicochemical properties. RESULTS: Between the defined groups of steroids, ClogP was the most discriminative descriptor. The steroids were well transported over the cell monolayers and the Papp was independent of the concentration and the transport direction. No relationship was found with the PSA; however, the Papp showed a weak inverse correlation with ClogP. CONCLUSIONS: The molecular descriptors and Papp values showed that all steroids are well transported. The small differences in the Papp values showed a weak inverse correlation with ClogP: the hydrophilic steroids (ClogP approximately 0-2) tend to diffuse faster over the cell monolayers compared with the more hydrophobic steroids (ClogP approximately 5). The relationship with ClogP suggests that partitioning of steroids between the biologic membrane and the surrounding aqueous phase is one of the main mechanisms for absorption.