The effect of surface roughening on the success of orthodontic mini-implants: A systematic review and meta-analysis.

INTRODUCTION: Orthodontic mini-implants are a widely accepted treatment modality in orthodontics; however, the failure rate is moderately high. Surface roughening is the golden standard in conventional oral implantology, and this may prove beneficial for orthodontic mini-implants as well. The objective of this systematic review is to assess the effect of surface roughening on the success rate of orthodontic mini-implants in both adolescent and adult patients undergoing orthodontic treatment. METHODS: Randomized studies comparing the success of surface-roughened and smooth, machined-surface orthodontic mini-implants were included. A literature search was conducted for 6 electronic databases (Pubmed/Medline, Embase, Cochrane, CINAHL, Web of Science, and Scopus), Clinical trial registry (https://www. CLINICALTRIALS: gov), and grey literature (Google Scholar). A manual search of the reference lists of included studies was performed. Two authors independently performed the screening, data extraction, risk of bias, and quality assessments. The risk of bias was assessed with the Cochrane risk-of-bias 2.0 Tool. Data were synthesized using a random effect model meta-analysis presented as a forest plot. The certainty in the body of evidence was assessed using the Grading of Recommendations Assessment, Development, and Evaluation tool. RESULTS: A total of 4226 unique records were screened, and 6 of these were included in the quantitative analysis. Four additional articles were selected for a secondary outcome. A total of 364 orthodontic mini-implants were included in the primary outcome analysis. There was no statistically significant effect of surface roughening on the success of orthodontic mini-implants (odds ratio = 0.63 favoring roughened orthodontic mini-implants; 95% confidence interval, 0.35-1.14). The secondary outcome (ie, the overall failure rate of roughened orthodontic mini-implants) was 6% based on studies with high heterogeneity. Limitations of this study were the risk of bias, study imprecision, and possible publication bias, leading to a very low certainty in the body of evidence. CONCLUSIONS: There is very low-quality evidence that there is no statistically significant effect of surface roughening on the success of orthodontic mini-implants in humans. The overall failure rate of surface-roughened orthodontic mini-implants was 6%. FUNDING: No funding was received for this review. REGISTRATION: This study was preregistered in the Prospective Register of Systematic Reviews (CRD42022371830).

HOW PRO'S CAN CONTRIBUTE TO WHAT MATTERS MOST TO PATIENTS WITH OROFACIAL CLEFTS.

An orofacial cleft (OC) is a congenital cleft that may affect the lip, alveolus, hard and soft palate. An OC impacts the individuals' appearance, psychosocial well-being and causes functional problems including feeding, dentition, growth of jaws, hearing and speech. The treatment of an orofacial cleft usually reaches from birth until 22 years of age or later. To understand and listen in an objective manner, OC specific Patient reported Outcome (PRO) and experience (PRE) measures are imperative. In patients with OCs many shared decision making moments exist from birth until adulthood. The aim is to understand what knowledge exists on PROs and PREs in patients with OCs, to formulate challenges to improve care to OC patients and how research on OCs needs to adapt. PROs and PREs need to be tailored to the individual with an OC. A framework with specific OC key domains including appearance, facial function and Health related Quality of Life exists. The current framework does not include the social network around the OC patients yet. However attention should be put on including family and community support into the framework. Also at an individual level more attention should be paid to enhancing experiences compared to impeding experiences. To create a better understanding traditional indicators and outcomes are combined with PROMs in a structured way. Challenges were identified that seek to improve our complete set of (PRO and PRE) instruments to provide better care to the individual with an OC and provide a voice so that good shared decision making is enabled. Thereby the individual with an OC is further empowered.

Classification Systems of Cleft Lip, Alveolus and Palate: Results of an International Survey.

OBJECTIVE: This study aimed to identify commonly used classification systems by cleft providers around the world, including the perceived indications and limitations of each system. DESIGN: A cross-sectional survey. PARTICIPANTS: A total of 197 registrants from three international cleft/craniofacial meetings. INTERVENTIONS: Participants were sent a web-based questionnaire concerning cleft classification systems. MAIN OUTCOME MEASURES: Frequency of commonly used classification systems, their perceived indications and limitations. RESULTS: A total of 197 respondents from 166 different centers completed the questionnaire. Healthcare professionals from all disciplines responded, with the most frequent respondents being plastic surgeons (38.1%), maxillofacial surgeons (28.4%) and orthodontists (23.9%). Eighteen different classification systems were in use. The most frequently used systems were the International Statistical Classification of Diseases and Related Health Problems (ICD-10) (35.5%), LAHSHAL (34.0%), and Veau (32.5%) classification systems. Most respondents (32.5%) indicated that anatomical and morphological characteristics are essential components of a classification system. However, respondents indicated that their current classification systems lacked sufficient description of cleft extension and severity. CONCLUSIONS: Great variety in the use of classification systems exists among craniofacial specialists internationally. The results recommend the usage of the LAHSHAL classification of OFCs, due to its comprehensiveness, relatively high implementation rate globally, convenience of usage and complementarity with the ICD-10 system. Moreover, it can overcome deficiencies inextricably linked to ICD-10, such as incapacity to describe laterality and clefts of the alveolus. More international exposure to the merits of using the LAHSHAL classification system would be highly recommended.

The Prediction Accuracy of Digital Orthodontic Setups for the Orthodontic Phase before Orthognathic Surgery.

The purpose of this study was to verify whether pre-treatment digital setups can accurately predict the tooth positions after presurgical orthodontic treatment has been performed in a 3-dimensional way. Twenty-six patients who underwent a combined orthodontic-orthognathic surgical treatment were included. Pre-treatment digital dental models were merged with cone beam computed tomography (CBCT) scans. One operator fabricated virtual setups to simulate the tooth movements of the presurgical orthodontic treatment. Prior to surgery, digital dental models were merged with the CBCT scans. Differences between de virtual setups and the presurgical dental models were calculated using linear mixed model analyses. Differences in tooth displacements exceeding the boundaries of clinical acceptance (>2 degrees for rotations and >0.6 mm for translations) were found in 75% of the rotational and 52% of translational mean differences in the maxilla and in 74% of the rotational mean differences and 44% of the translational mean differences in the mandible. Significant differences were found for all tooth types and in all tooth displacement directions with significant effects of extractions and surgically assisted rapid maxillary expansion (SARME) procedures. The accuracy of the digital setup is still too limited to correctly simulate the presurgical orthodontic treatment.

A semi-automatic three-dimensional technique using a regionalized facial template enables facial growth assessment in healthy children from 1.5 to 5.0 years of age.

Objectives: To develop a semi-automatic technique to evaluate normative facial growth in healthy children between the age of 1.5 and 5.0 years using three-dimensional stereophotogrammetric images. Materials and Methods: Three-dimensional facial images of healthy children at 1.5, 2.0, 2.5, 3.0, 4.0 and 5.0 years of age were collected and positioned based on a reference frame. A general face template was used to extract the face and its separate regions from the full stereophotogrammetric image. Furthermore, this template was used to create a uniform distributed mesh, which could be directly compared to other meshes. Average faces were created for each age group and mean growth was determined between consecutive groups for the full face and its separate regions. Finally, the results were tested for intra- and inter-operator performance. Results: The highest growth velocity was present in the first period between 1.5 and 2.0 years of age with an average of 1.50 mm (±0.54 mm) per six months. After 2.0 years, facial growth velocity declined to only a third at the age of 5.0 years. Intra- and inter-operator variability was small and not significant. Conclusions: The results show that this technique can be used for objective clinical evaluation of facial growth. Example normative facial averages and the corresponding facial growth between the age 1.5 and 5.0 years are shown. Clinical Relevance: This technique can be used to collect and process facial data for objective clinical evaluation of facial growth in the individual patient. Furthermore, these data can be used as normative data in future comparative studies.

Oral health-related quality of life before, during, and after orthodontic-orthognathic treatment: a systematic review and meta-analysis.

OBJECTIVES: The effect of combined orthodontic-orthognathic treatment was estimated, specifically the impact of pre-surgical orthodontic treatment, on oral health-related quality of life (OHRQoL). MATERIALS AND METHODS: The research question was formulated using the PICO method. The search was carried out in MEDLINE via PubMed, CINAHL, psychINFO, Embase, and Cochrane (until February 3, 2020). Inclusion criteria were patients aged ≥ 17 years who underwent combined orthodontic-surgical treatment, quality of life assessment, and study design of randomized controlled trial, controlled clinical trial, prospective cohort study, observational study, intervention study, or cross-sectional study. The ROBINS-1 tool was used to assess the risk of bias within studies. A random effects meta-analysis was conducted when appropriate. The quality of evidence was assessed using the GRADE approach. RESULTS: Six studies were analyzed. The OHIP-14 and/or OQLQ-22 questionnaires were used to measure the OHRQoL. All six studies had a serious risk of bias. Two studies (87 participants) were included in a meta-analysis showing improvement of OHRQoL when comparing before and after treatment were compared (mean 14.85 scale points, 95% confidence interval 10.36;19.35). CONCLUSIONS: Studies indicate a decrease in OHRQoL during the pre-surgical orthodontic treatment phase but improvement after orthodontic-orthognathic treatment. Data substantiating these results are limited, and the quality of evidence is low. Further research is needed to assess the impact of pre-surgical orthodontic treatment on the OHRQoL in an orthognathic trajectory. CLINICAL RELEVANCE: Patients should be well informed about the effect facial/esthetic changes may have on their OHRQoL during sequential phases of orthodontic-orthognathic treatment.

Treatment Outcome in Bilateral Cleft lip and Palate Patients Evaluated With the Huddart-Bodenham Scoring System and the Bilateral Cleft lip and Palate Yardstick: A Systematic Review.

OBJECTIVES: To assess treatment outcome (transversal and sagittal dental arch relationships) and its determinants in complete bilateral cleft lip and palate (BCLP) evaluated with the modified Huddart-Bodenham scoring system and the BCLP Yardstick. MATERIALS AND METHODS: Multiple electronic databases were searched without time limitation. Randomized clinical trials, cohort and case control studies using BCLP Yardstick and/or modified Huddart-Bodenham system to judge treatment outcome of patients with BCLP were included. The Risk of Bias in Nonrandomized Studies of Interventions tool and Grading of Recommendations, Assessment, Development, and Evaluation was used. RESULTS: Of the 528 studies identified by the electronic search, only eight retrospective studies met the inclusion criteria and were included. A total of 12 cleft centers were represented. All treatment protocols differed and background information was underreported. The results for the BCLP yardstick showed that all except the centers in New Zealand had a mean score lower than 3, indicating good treatment results. However, these studies had a moderate to high risk of bias. The modified Huddart-Bodenham scores were negative in all studies. No further meta-analysis was done due to heterogeneity and high risk of bias. The quality of evidence was graded as very low. CONCLUSION: Results for the dental arch relationship of studies in complete BCLP and possible determinants were not synthesized due to very low quality of evidence. Clinical research for patients with BCLP should focus on sound methodological designs to enable evidence-based decision making to improve treatment for patients with BCLP and thereby hopefully their quality of life.

Evaluation of dental maturity in Muenke syndrome, Saethre-Chotzen syndrome, and TCF12-related craniosynostosis.

OBJECTIVES: To determine whether dental maturity (dental development) was delayed in patients with Muenke syndrome, Saethre-Chotzen syndrome, and TCF12-related craniosynostosis, compared with a Dutch control group without syndromes. MATERIALS AND METHODS: This study included 60 patients (38 patients with Muenke syndrome, 17 patients with Saethre-Chotzen syndrome, and 5 with TCF12-related craniosynostosis), aged 5.8-16.8 years that were treated at the Department of Oral Maxillofacial Surgery, Special Dental Care, and Orthodontics, in Sophia Children's Hospital, Erasmus University Medical Center, Rotterdam, the Netherlands. Dental age was calculated according to Demirjian's index of dental maturity. The control group included 451 children without a syndrome. RESULTS: Compared with the control group, dental development was delayed by an average of one year in 5- to 8-year-old patients with Muenke syndrome (P = 0.007) and in 8- to 10-year-old patients with Saethre-Chotzen syndrome (P = 0.044), but not in patients with TCF12-related craniosynostosis. CONCLUSIONS: Our results indicated that dental development was delayed by one year, on average, in patients with Muenke syndrome and Saethre-Chotzen syndrome, compared with a Dutch control group without syndromes. IMPLICATIONS: Our findings have improved the understanding of dental development in patients with Muenke and Saethre-Chotzen syndrome. These results can provide guidance on whether the orthodontist needs to consider growth disturbances related to dental development.

The influence of the model superimposition method on the assessment of accuracy and predictability of setup models.

INTRODUCTION: The aim of this study was to evaluate the influence of different superimposition methods on the accuracy and predictability of conventional and virtual diagnostic setups. MATERIALS AND METHODS: Ten finished cases were used to make a conventional setup and a virtual setup. Second molars were not moved in the two setup situations to allow a reference for superimposition. Conventional and virtual setups were superimposed and compared by second molar registration and the whole surface best fit method (WSBF). Conventional and virtual setups were compared to the posttreatment models with WSBF and palatal rugae best fit (PRBF). Anterior, intermediate, and posterior regions of the dental arches were compared. The paired t-test was used to compare the mean differences between conventional and virtual setups, posttreatment models and both conventional and virtual setups by the WSBF method, and between maxillary posttreatment and virtual setup models using the WSBF and PRBF methods. RESULTS: Conventional and virtual setups differed depending on the two superimposition methods used. Superimposition of the posttreatment models and both setups using WSBF presented no statistically significant differences. There were statistically significant differences between posttreatment and virtual setup models using WSBF and PRBF superimposition methods. CONCLUSIONS: The model superimposition method influenced the assessment of accuracy and predictability of setup models. There were statistically significant differences between the maxillary posttreatment and virtual setup models using the WSBF and the PRBF superimposition methods. It is important to establish stable structures to evaluate the accuracy and predictability of setup models.

The association of maternal folic acid supplementation and prenatal folate and vitamin B12 concentrations with child dental development.

OBJECTIVE: Low folic acid, folate and vitamin B12 might affect tooth formation and mineralization. The conversion of folic acid into folate is catalysed by the methylenetetrahydrofolate (MTHFR) enzyme which is encoded by the MTHFR gene. Among 3728 mothers and their 10-year-old children from the Generation R Study, we investigated associations of maternal folic acid supplementation and prenatal folate and vitamin B12 concentrations with child dental development. Secondly, we checked the modifying effect of MTHFR-C677T polymorphism. METHODS: Information on folic acid supplementation was obtained by questionnaires. Concentrations of folate and vitamin B12 were measured from venous samples taken in early pregnancy. Developmental stages of teeth were defined by the Demirjian method at the age-10 assessment. In addition, dental age of the children was calculated using the Dutch standard. GLM and multivariate linear regression models were built to study the associations. RESULTS: Folic acid supplementation started when pregnancy was known (ß = -0.09; 95% CI: -0.17, -0.01) and folic acid supplementation started prior to known pregnancy (ß = -0.12; 95% CI: -0.20, -0.04) were both associated with decelerated dental development by 1-2 months lower dental age of 10-year-old children. Folate (ß = -0.02, 95% CI: -0.05, 0.02) and vitamin B12 (ß = 0.03, 95% CI: -0.00, 0.06) were not associated with dental age. MTHFR-C677T did not modify the associations. CONCLUSIONS: Maternal folic acid supplementation delays dental development of children by 1-2 months dental age, whereas maternal folate and vitamin B12 concentrations in early pregnancy do not affect the timing of child dental development.

Long-term follow-up of mandibular dental arch changes in patients with complete non-syndromic unilateral cleft lip, alveolus, and palate.

BACKGROUND: Treatment of cleft lip and palate (CLP) requires a comprehensive interdisciplinary approach and long-term follow-up. Only a few studies are available that reported on changes after treatment, which showed that in particular the transverse dimension, in patients with CLP is prone to changes after treatment. However, those studies did not pay attention to concomitant changes in the mandibular arch that occur after treatment. OBJECTIVES: To evaluate mandibular transverse dental arch dimensions and interarch transverse changes in patients with complete non-syndromic unilateral cleft lip, alveolus, and palate (CUCLAP) up to five years after treatment. MATERIAL AND METHODS: Retrospective longitudinal study in 75 consecutive patients with CUCLAP directly after comprehensive treatment (T0), two (T2), and 5 years after treatment (T5). Great Ormond Street, London and Oslo (GOSLON) scores were available for all patients. Three-dimensional scans of all dental casts were made. Inter premolar and intermolar distances between the mandibular contralateral teeth were measured. The modified Huddart Bodenham (MHB index) was applied to assess the transverse interarch relationship. Paired t-tests and ANOVA were used to analyze transverse and interarch transverse changes. Linear regression analysis was done to define contributing factors. RESULTS: Paired t-tests showed a significant decrease of the mandibular inter first and second premolar distances (p < 0.05) and an increase of the inter second molar distance, whilst the MHB Index deteriorated at all time points for all segments and for the total arch score (p < 0.05). Linear regression showed no significant contributing factors on the decrease of the transverse distances. However, inter arch transverse relationship was significantly affected by age at the end of treatment, missing maxillary lateral incisor space closure, and the GOSLON Yardstick score at the end of treatment (p < 0.05), especially during the first two years after treatment. CONCLUSIONS: Changes occurred in the mandibular arch expressed as changes in the transverse dimensions and interarch relationship measured by the MHB Index. A younger age at the end of treatment, space closure for a missing maxillary lateral incisor and a higher GOSLON score at the end of treatment negatively influence the interarch transverse deterioration especially in the first two years after treatment. For the transverse dimensional changes in the mandibular arch such influencing factors could not be determined.

Operator Performance of the Digital Setup Fabrication for Orthodontic-Orthognathic Treatment: An Explorative Study.

The purpose of this study was to explore the operator performance of the fabrication of digital orthodontic setups integrated into cone beam computed tomography (CBCT) scans. Fifteen patients who underwent a combined orthodontic-orthognathic surgical treatment were included. The pre-treatment digital dental models and CBCT scans were fused, and four operators made virtual setups twice for all patients. Differences between the virtual setups were calculated by recording tooth crown movement from the pre-treatment model to the virtual setup. To examine performance, Pearson's correlation coefficients, duplicate measurement errors, and inter-operator differences were calculated. For intra-operator performance, correlation values varied among tooth types, with mean correlation values from 0.66 to 0.83 for the maxilla and 0.70 to 0.83 for the mandible. For inter-operator performance, mean correlation values varied from 0.40 to 0.87 for the maxilla and from 0.44 to 0.80 for the mandible. Rotational mean differences exceeded the range of clinical acceptance (>2 degrees) at 18% for the maxilla and 20.8% for the mandible, and translational mean differences exceeded the range of clinical acceptance (0.6 mm) at 9.7% and 26% for the maxilla and mandible, respectively. The intra- and inter-operator performance of digital orthodontic setup construction for virtual three-dimensional orthognathic planning shows significant errors.

Highly variable rate of orthodontic tooth movement measured by a novel 3D method correlates with gingival inflammation.

OBJECTIVES: Individual orthodontic treatment duration is hard to predict. Individual biological factors are amongst factors influencing individual rate of orthodontically induced tooth movement (OTM). The study aim is to determine the rate of OTM by a novel 3D method and investigate parameters that may predict the rate of tooth movement. MATERIALS AND METHODS: In this prospective cohort study, rate of OTM was determined from 90 three-dimensional intra-oral scans in 15 patients (aged 12-15) undergoing orthodontic treatment. For each patient, intra-oral scans were taken every week for up to 6 weeks (T0-T5). The teeth were segmented from the scans and the scans were superimposed on the palatal rugae. The rate of OTM was calculated for each tooth. Other parameters were gingival inflammation, contact-point displacement and the biological markers, matrix metalloproteinases (MMP), MMP-9 and MMP-2 in gingival crevicular fluid (GCF). RESULTS: Our study showed a high variation in the rate of OTM, varying from 0.15 to 1.24 mm/week. Teeth in the anterior segment tended to move more compared with the posterior segment. The contact point displacement and gingival inflammation varied greatly amongst the patients. The MMPs measured did not correlate with tooth movement. However, the gingival inflammation index showed a significant correlation with OTM. Future studies should include other biological markers related to bone-remodeling. CONCLUSION: This novel and efficient 3D method is suitable for measuring OTM and showed large individual variation in rate of OTM. CLINICAL RELEVANCE: Patients show different rates of OTM. The rate of OTM in an individual patient can provide guidance in timing of follow-up appointments.

The effect of lip closure on palatal growth in patients with unilateral clefts.

OBJECTIVES: The objective of this study was to compare maxillary dimensions and growth in newborns with Complete Unilateral Cleft Lip and Palate (UCLP) to healthy newborns before and after cheiloplasty. Additionally, a palatal growth curve is constructed to give more information about the natural growth before surgical intervention. METHODS: Twenty-eight newborns with complete UCLP were enrolled in this study. Multiple plaster-casts of each child during their first year were collected and grouped in before and after cheiloplasty. A previous developed semi-automatic segmentation tool was used to assess the maxillary dimensions and were compared to a healthy control group. Z-scores were calculated to indicate differences between the two populations and if cheiloplasty had influence on maxillary growth. Furthermore, the prediction model created in a previous study was used to indicate differences between predictions and the outcome in UCLP measurements. The analysis was tested for inter- and intra-observer variability. RESULTS: Results show differences in alveolar and palatal shape in UCLP patients in comparison with healthy controls. Prior to cheiloplasty an increased width and alveolar length was observed while the palatal depth was decreased. After cheiloplasty the widths moved towards normal but were still significantly larger. CONCLUSION: Infants with unilateral cleft lip and palate show a wider maxillary arch in comparison with the control population. Initial treatment has most influence on the width of the arch, which decreased towards normal.

Impact of orthodontic treatment need and deviant occlusal traits on oral health-related quality of life in children: A cross-sectional study in the Generation R cohort.

INTRODUCTION: Many studies have investigated the impact of orthodontic treatment need (OTN) on children's oral health-related quality of life (OHRQOL). However, few studies have explored the impact of deviant occlusal traits on OHRQOL regarding the severity of OTN. This cross-sectional study aims to address this gap in the literature. METHODS: This study was conducted within the Generation R Study, a population-based prospective cohort study. We assessed OTN with the Index of Orthodontic Treatment Need and OHRQOL with a parental short-form of the Child Oral Health Impact Profile in 3048 children at a median age of 9.74 years (9.5-10.0). We also further assessed individual malocclusion traits in a subsample of 2714 children. We investigated the association between OTN, malocclusion traits, and OHRQOL using multiple regression analysis with weighted least squares. RESULTS: Children with definite (adjusted effect estimate = -0.81; 95% confidence interval -1.12 to -0.50) or borderline (adjusted effect estimate = -0.34; 95% confidence interval -0.61 to -0.08) OTN experienced significant decreases in their OHRQOL than those with no need. An impacted tooth, increased overjet, or crowding had significant negative impacts on children's OHRQOL. Children with an overjet experienced negative impacts on OHRQOL even when orthodontic treatment was not necessary. CONCLUSIONS: Progressively greater OTN has increasingly negative impacts on parent's perception of children's OHRQOL. In particular, children presenting with large overjets and impacted teeth have lower OHRQOL. These perspectives add to better patient-clinician communication and understanding of patient expectations around OTN, which may potentially lead to improvements in quality of care from the patient perspective.

Three-dimensional characterization of mandibular asymmetry in craniofacial microsomia.

OBJECTIVES: This study aimed to investigate the three-dimensional (3D) mandibular asymmetry in craniofacial microsomia (CFM) and its association with the Pruzansky-Kaban classification system. MATERIALS AND METHODS: Cone-beam computed tomography images of 48 adult CFM cases were collected. The asymmetry of the mandibular body and ramus was analyzed with 3D landmarks. The mirrored mandibular model was registered on the original model, yielding a color-coded distance map and an average distance (i.e., asymmetry score) to quantify the overall mandibular asymmetry. RESULTS: The lengths of the mandibular body and ramus were significantly shorter on the affected than the contralateral side (p < 0.001). The ANB (p = 0.009), body and ramal lengths (both p < 0.001), and body and ramal length asymmetry (both p < 0.05) were significantly different between mild (types I/IIA) and severe (types IIB/III) cases. The mandibular asymmetry score correlated with mandibular body length asymmetry (r = 0.296, p = 0.046). CFM mandibles showed high variability in shape asymmetry. CONCLUSIONS: CFM patients showed distinct body and ramal length asymmetries. In severe cases, mandibles were smaller, more retruded, and more asymmetric in length. The mandibular shape asymmetry was highly variable regardless of the Pruzansky-Kaban types, being a determinant in the extent of overall mandibular asymmetry. CLINICAL RELEVANCE: The 3D morphologic analysis provides better insights into real mandibular asymmetry. Although the Pruzansky-Kaban classification was applied, high individual variability of the mandibular morphology still existed within the types. Therefore, individualized analyses and treatment plans for CFM patients are highly recommended.

Accuracy and reliability of measurements performed using two different software programs on digital models generated using laser and computed tomography plaster model scanners.

OBJECTIVE: The aim of this study was to compare the accuracy and reliability of measurements performed using two different software programs on digital models generated using two types of plaster model scanners (a laser scanner and a computed tomography [CT] scanner). METHODS: Thirty plaster models were scanned with a 3Shape laser scanner and with a Flash CT scanner. Two examiners performed measurements on plaster models by using digital calipers and on digital models by using Ortho Analyzer (3Shape) and Digimodel® (OrthoProof) software programs. Forty-two measurements, including tooth diameter, crown height, overjet, overbite, intercanine and intermolar distances, and sagittal relationship, were obtained. RESULTS: Statistically significant differences were not found between the plaster and digital model measurements (ANOVA); however, some discrepancies were clinically relevant. Plaster and digital model measurements made using the two scanning methods showed high intraclass coefficient correlation values and acceptable 95% limits of agreement in the Bland-Altman analysis. The software used did not influence the accuracy of measurements. CONCLUSIONS: Digital models generated from plaster casts by using laser and CT scanning and measured using two different software programs are accurate, and the measurements are reliable. Therefore, both fabrication methods and software could be used interchangeably.

Tissue engineering strategies combining molecular targets against inflammation and fibrosis, and umbilical cord blood stem cells to improve hampered muscle and skin regeneration following cleft repair.

Cleft lip with or without cleft palate is a congenital deformity that occurs in about 1 of 700 newborns, affecting the dentition, bone, skin, muscles and mucosa in the orofacial region. A cleft can give rise to problems with maxillofacial growth, dental development, speech, and eating, and can also cause hearing impairment. Surgical repair of the lip may lead to impaired regeneration of muscle and skin, fibrosis, and scar formation. This may result in hampered facial growth and dental development affecting oral function and lip and nose esthetics. Therefore, secondary surgery to correct the scar is often indicated. We will discuss the molecular and cellular pathways involved in facial and lip myogenesis, muscle anatomy in the normal and cleft lip, and complications following surgery. The aim of this review is to outline a novel molecular and cellular strategy to improve musculature and skin regeneration and to reduce scar formation following cleft repair. Orofacial clefting can be diagnosed in the fetus through prenatal ultrasound screening and allows planning for the harvesting of umbilical cord blood stem cells upon birth. Tissue engineering techniques using these cord blood stem cells and molecular targeting of inflammation and fibrosis during surgery may promote tissue regeneration. We expect that this novel strategy improves both muscle and skin regeneration, resulting in better function and esthetics after cleft repair.

Non-Syndromic Cleft Lip with or without Cleft Palate: Genome-Wide Association Study in Europeans Identifies a Suggestive Risk Locus at 16p12.1 and Supports SH3PXD2A as a Clefting Susceptibility Gene.

Non-syndromic cleft lip with or without cleft palate (nsCL/P) ranks among the most common human congenital malformations, and has a multifactorial background in which both exogenous and genetic risk factors act in concert. The present report describes a genome-wide association study (GWAS) involving a total of 285 nsCL/P patients and 1212 controls from the Netherlands and Belgium. Twenty of the 40 previously reported nsC/LP susceptibility loci were replicated, which underlined the validity of this sample. SNV-based analysis of the data identified an as yet unreported suggestive locus at chromosome 16p12.1 (p-value of the lead SNV: 4.17 × 10-7). This association was replicated in two of three patient/control replication series (Central European and Yemeni). Gene analysis of the GWAS data prioritized SH3PXD2A at chromosome 10q24.33 as a candidate gene for nsCL/P. To date, support for this gene as a cleft gene has been restricted to data from zebrafish and a knockout mouse model. The present GWAS was the first to implicate SH3PXD2A in non-syndromic cleft formation in humans. In summary, although performed in a relatively small sample, the present GWAS generated novel insights into nsCL/P etiology.