Anatomical complexities affecting root canal preparation: a narrative review.

A fundamental aspect of the Endodontic field is the knowledge of root canal anatomy. Using a variety of techniques, the internal and external anatomy of teeth have been extensively investigated throughout the past century. Recent improvements in three-dimensional computed tomography have enabled more detailed evaluations of root canal morphology in both clinical and laboratory settings. Essentially, researches have unveiled that the root canal constitutes a complex system, comprising not only the main root canal but also lateral components, including isthmuses, fins, accessory canals and apical ramifications. Undoubtedly, this intricate morphology poses a significant challenge when it comes to the process of shaping, cleaning and disinfecting the root canal system. This article aims to explore the anatomical aspects of the root canal system that impact the chemomechanical procedures.

Exploring the root canal microbiome in previously treated teeth: A comparative study of diversity and metabolic pathways across two geographical locations.

AIM: To analyse and compare the root canal microbiome present in root-filled teeth of two different geographical populations, and to study their functional potential using a next-generation sequencing approach. METHODOLOGY: Sequencing data obtained from surgical specimens from previously treated teeth with periapical bone loss from Spain and USA were included in the study. Taxa were classified using SILVA v.138 database. Differences in genera abundances among the 10 most abundant genera were evaluated using a Kruskal-Wallis test. Alpha diversity indices were calculated in mothur. The Shannon and Chao1 indices were used. Analyses of similarity (ANOSIM) to determine differences in community composition were done in mothur, with Bonferroni correction for multiple comparisons. p-Values < .05 were considered statistically significant. Identification of enriched bacteria function prediction in the study groups (KEGG pathways) was carried out by linear discriminant analysis effect size (LEfSe) via Python 3.7.6. RESULTS: A greater alpha-diversity (Shannon and Chao1 indices) was observed from samples obtained in Spain (p = .002). Geography showed no significant effects on community composition via an ANOSIM using Bray-Curtis dissimilarities (R = 0.03, p = .21). Bacterial functional analysis prediction obtained by PICRUSt showed that 5.7% KEGG pathways differed between the Spain and US samples. CONCLUSIONS: The taxonomic assessment alone does not fully capture the microbiome's differences from two different geographical locations. Carbohydrate and amino acid metabolism were enriched in samples from Spain, while samples from USA had a higher representation of pathways related to nitrogen, propanoate metabolism, and secretion systems.

Laboratory simulation of longitudinally cracked teeth using the step-stress cyclic loading method.

AIM: To simulate in a laboratory setting longitudinal cracking in root filled premolar teeth, using cyclic mechanical fatigue. METHODOLOGY: Mesial-occlusal-distal (MOD) cavities were prepared in twenty root filled, single-rooted, mandibular premolars restored with fibre posts and resin composites. The samples were randomly divided into two groups based on the loading approaches: static loading with a crosshead speed of 0.5 mm/min and step-stress cyclic loading (1 Hz) with increasing amplitude. The loads and numbers of cycles to failure were recorded. Micro-CT was also used to identify the fracture modes. Statistical analysis was performed using Student's t-test. The level of significance was set at 0.05. RESULTS: The mean fracture loads for the static loading and cyclic loading groups were 769 ± 171 N and 720 ± 92 N, respectively. There was no significant difference between the two groups (P > 0.05). The proportions of longitudinal, cuspal and mixed-mode fractures under cyclic loading were 50%, 20% and 30%, respectively. Longitudinal fractures occurred with larger numbers of cycles and higher average loads per cycle compared with the other fractures. Static loading produced only cuspal fractures. CONCLUSIONS: Longitudinally cracked premolar teeth with root fillings were successfully produced using the step-stress cyclic loading method. This provides a more clinically representative methodology for studying cracked teeth in a laboratory setting.

What is of interest in Endodontology? A bibliometric review of research published in the International Endodontic Journal and the Journal of Endodontics from 1980 to 2019.

AIM: To report the most common terminology used in titles of scientific papers published in the International Endodontic Journal (IEJ) and Journal of Endodontics (JOE) between 1980 and 2019 and to identify the most-cited papers in these journals. METHODOLOGY: The Web of Science database was searched to retrieve all the manuscripts published in the IEJ and JOE between 1980 and 2019. The articles were analysed using the VOS viewer software and the terms within the titles extracted. The top-10 terms were categorized according to the number of occurrences and the decade of publication. Maps were created using the text data for each decade of publication. Classic papers were identified when the number of citations was >400. During the same period of time, highly cited studies were identified including the authors, institutions and countries associated with these papers. RESULTS: Terms such as canal, molar and periapical lesion were the most commonly used in titles between 1980 and 1999. The terms instruments, expression, case report and cell were the most often terms used between 2000 and 2019. During the last 10 years, an increase in the number of reviews and papers on cone beam computed tomography occurred. The organizations with the largest number of citations in each decade were University of São Paulo, University College London, Loma Linda University and United States Army. The country with the largest number of citations and greatest number of top 10 and top 100 manuscripts was the United States. A paper had to be associated with more than 167 citations to be included in the top-100 most-cited list; at least 14 papers met the criteria to be categorized as a citation classic (>400 citations). CONCLUSION: While many diverse areas of endodontics have been explored in the last 40 years within the IEJ and JOE, only a relatively few topics are highly cited and can be considered as classics.

A protocol for developing reporting guidelines for laboratory studies in Endodontology.

Laboratory-based research studies are the most common form of research endeavour and make up the majority of manuscripts that are submitted for publication in the field of Endodontology. The scientific information derived from laboratory studies can be used to design a wide range of subsequent studies and clinical trials and may have translational potential to benefit clinical practice. Unfortunately, the majority of laboratory-based articles submitted for publication fail the peer-review step, because unacceptable flaws or substantial limitations are identified. Even when apparently well-conducted laboratory-based articles are peer-reviewed, they can often require substantial corrections prior to the publication. It is apparent that some authors and reviewers may lack the training and experience to have developed a systematic approach to evaluate the quality of laboratory studies. Occasionally, even accepted manuscripts contain limitations that may compromise interpretation of data. To help authors avoid manuscript rejection and correction pitfalls, and to aid editors/reviewers to evaluate manuscripts systematically, the purpose of this project is to establish and publish quality guidelines for authors to report laboratory studies in the field of Endodontology so that the highest standards are achieved. The new guidelines will be named-'Preferred Reporting Items for Laboratory studies in Endodontology' (PRILE). A steering committee was assembled by the project leads to develop the guidelines through a five-phase consensus process. The committee will identify new items as well as review and adapt items from existing guidelines. The items forming the draft guidelines will be reviewed and refined by a PRILE Delphi Group (PDG). The items will be evaluated by the PDG on a nine-point Likert scale for relevance and inclusion. The agreed items will then be discussed by a PRILE face-to-face consensus meeting group (PFCMG) formed by 20 individuals to further refine the guidelines. This will be subject to final approval by the steering committee. The approved PRILE guidelines will be disseminated through publication in relevant journals, presented at congresses/meetings, and be freely available on a dedicated website. Feedback and comments will be solicited from researchers, editors and peer reviewers, who are invited to contact the steering committee with comments to help them update the guidelines periodically.

Apical root canal anatomy in the mesiobuccal root of maxillary first molars: influence of root apical shape and prevalence of apical foramina - a micro-CT study.

AIM: To determine whether a relationship exists between the apical shape of roots and root canal system complexity by performing a micro-computed tomography analysis. METHODOLOGY: One hundred extracted permanent maxillary first molars were scanned using a micro-computed tomography device at 19.6 µm voxel size. Two groups of mesiobuccal roots were formed according to the root aspect ratio value in the apical 3-mm cross-sectional level ('<2 and ≥ 2.00'). Data were recorded regarding the number and presence of accessory canals and their location, isthmus, presence of the mesiobuccal canal and dentine thickness. Depending on the analysed variable, Mann-Whitney U test and Z-test for proportions were used to compare groups. The significant level was set at 5%. RESULTS: Mesiobuccal roots with an aspect ratio ≥ 2.00 at the apical 3-mm cross-sectional level had higher percentages of accessory canals, apical foramina and MB2 root canals in the apical 3 mm. The vertical average distance from the accessory foramina and origin from the anatomic apex was 1.40 and 2.19 mm, respectively. Overall, 21.8% of the accessory canals had their origin coronal to a 3-mm root resection line. There was no difference between the groups regarding dentine thickness. CONCLUSION: The shape of the apical 3 mm of maxillary first molar mesiobuccal roots was a predictive factor for the presence of complex root canal systems. Roots with a lower aspect ratio had less complex apical anatomy.

Micro-CT analysis of danger zone thickness in the mesiobuccal roots of maxillary first molars.

AIM: To evaluate dentine thickness from both distal ('danger zone') and mesial ('safety zone') aspects of the MB1 and MB2 canals of maxillary first molars at the furcation level using micro-CT imaging. METHODOLOGY: One hundred maxillary first molars with two canals in the MB root were selected from a Brazilian subpopulation and scanned at a resolution of 19.6 µm in a micro-CT device. From each specimen, two axial cross-sectioned images were selected at 2 and 3 mm apical to the furcation level of the MB root and evaluated for the smallest dentinal thickness. Measurements were made from the outer perimeter of the MB1 and MB2 canals towards the external root surface from both distal (danger zone) and mesial (safety zone) aspects of the root. The influence of an isthmus was also considered in the analysis, and samples were classified according to the presence or absence of an isthmus in the axial sections. Non-parametric Wilcoxon signed-rank tests were used to compare dentinal thickness between MB1 and MB2 canals with a significant level set at 5%. Colour-coded 3D models of dentine thickness throughout the MB root were created and evaluated qualitatively. RESULTS: At both levels, median dentine thickness of the MB2 canal was significantly lower in both distal and mesial aspects of the root in comparison with the MB1 canal (P < 0.01). The presence of an isthmus was not a variable that influenced dentinal thickness. Colour-coded models indicated that dentine thickness was dependent on the cross-sectional shape of the MB root. At least 50% of the sample had <1 mm of dentine thickness at the danger zone of the MB2 canal. CONCLUSIONS: Danger zones in the MB roots of maxillary first molars were not symmetrical. MB2 canals had less dentine thickness on both aspects of the root compared to the MB1 canal.

Differences in root canal system configuration in human permanent teeth within different age groups.

AIM: To analyse the differences in root canal system configuration in patients belonging to different age groups using cone beam computed tomography (CBCT) technology. METHODOLOGY: CBCT examinations from a pre-existing database were accessed. Patients were divided according to age groups: '≤20 years', '21-40 years', '41-60 years' and '≥61 years'. Each group included tooth data regarding their root canal system configurations according to the Vertucci classification and its supplementary configurations. Cohen kappa coefficient of agreement was calculated to evaluate observer reliability. RESULTS: Overall 12 325 teeth from 670 patients were included. Most of the root groups had higher or equal prevalence of Vertucci type I configurations in the younger groups whilst presenting a greater tendency for multiple root canal system configurations in older patients, mainly Vertucci type II in both maxillary and mandibular second premolars and in the distal root of the mandibular first molar. The Cohen kappa coefficient of agreement was 89.4 ± 1.8%. CONCLUSION: Clinicians should be aware that the root canal system configuration changes over a lifetime. In this study, the most affected teeth were the second premolars and the distal root of mandibular first molars.

Morphological evaluation of maxillary second molars with fused roots: a micro-CT study.

AIM: To evaluate the internal and external morphologies of fused-rooted maxillary second molars by means of micro-computed tomography (micro-CT) analysis. METHODOLOGY: A total of 100 fused-rooted maxillary second molars from a Brazilian subpopulation were divided into six groups according to the root morphology. The samples were scanned at a resolution of 19.6 µm and evaluated with regard to the external morphology of the roots, the root canal configuration, the percentage frequency of C-shaped canals and isthmuses, as well as the morphology of the root canal system at 1, 2 and 3 mm from the anatomical apex of the fused roots. RESULTS: The most prevalent root canal fusions were type 1, mesiobuccal root fused with distobuccal root (32%), followed by type 3, DB root fused with P root (27%), and type 4, MB root fused with DB root, and P root fused with MB or DB roots (21%). The prevalence of C-shaped root canal systems were 22%. Depending on the type of root fusion, the percentage frequency of isthmuses in the apical level varied from 9.3% to 42.8%, whilst the presence of apical deltas ranged from 18.5% to 57.1% of teeth. CONCLUSIONS: The root canal system of maxillary second molars with fused roots may have a high incidence of merging canals, isthmuses, apical deltas and C-shaped configurations.

Comparative accuracy of the Clearing Technique, CBCT and Micro-CT methods in studying the mesial root canal configuration of mandibular first molars.

AIMS: To compare the accuracy of the clearing technique and cone beam computed tomography (CBCT) in the assessment of root canal configurations using micro-computed tomography (micro-CT) imaging system as the reference standard. METHODOLOGY: Thirty-two mesial roots of mandibular first molars, selected on the basis of micro-CT scans (voxel size: 19.6 µm) and presenting several canal configurations, were evaluated using 2 CBCT scanners (voxels sizes: 120 µm and 150 µm) followed by the clearing technique. Two examiners analysed the data from each method and classified the anatomical configuration of the mesial canal according to Vertucci's system. Data were compared using Fisher's exact and chi-square tests. Reliability for each assessment was verified by the kappa test, and significance level was set at 5%. RESULTS: Kappa value indicated a high level of agreement between the examiners. Detection of type I configurations was significantly lower in cleared teeth (P < 0.05), whilst type II root canals were detected in all specimens by both tests (P > 0.05). In mesial roots with variable anatomical configurations, CBCT and the clearing method were significantly less accurate than the reference standard (P < 0.05). CONCLUSION: Within the tooth population studied, accuracy of identifying mesial root canal configuration was influenced greatly by the evaluation method and the type of anatomy. Detection of type I configurations in cleared teeth was significantly lower, whilst type II configurations were detected in all specimens by both methods. In mesial roots with variable anatomical configurations, neither CBCT nor clearing methods were accurate for detecting the actual root canal anatomy.

Effect of finishing instrumentation using NiTi hand files on volume, surface area and uninstrumented surfaces in C-shaped root canal systems.

AIM: To assess the effect of 90°-oscillatory instrumentation with hand files on several morphological parameters (volume, surface area and uninstrumented surface) in C-shaped root canals after instrumentation using a single-file reciprocation system (Reciproc; VDW, Munich, Germany) and a Self-Adjusting File System (SAF; ReDent Nova, Ra'anana, Israel). METHODOLOGY: Twenty mandibular second molars with C-shaped canals and C1 canal configurations were divided into two groups (n = 10) and instrumented with Reciproc and SAF instruments. A size 30 NiTi hand K-file attached to a 90°-oscillatory motion handpiece was used as final instrumentation in both groups. The specimens were scanned using micro-computed tomography after all procedures. Volume, surface area increase and uninstrumented root canal surface were analysed using CTAn software (Bruker-microCT, Kontich, Belgium). Also, the uninstrumented root canal surface was calculated for each canal third. All values were compared between groups using the Mann-Whitney test and within groups using the Wilcoxon's signed-rank test. RESULTS: Instrumentation with Reciproc significantly increased canal volume compared with instrumentation with SAF. Additionally, the canal volumes were significantly increased after 90°-oscillatory instrumentation (between and within group comparison; (P < 0.05)). Regarding the increase in surface area after all instrumentation protocols, statistical analysis only revealed significant differences in the within groups comparison (P < 0.05). Reciproc and SAF instrumentation yielded an uninstrumented root canal surface of 28% and 34%, respectively, which was not significantly different (P > 0.05). Final oscillatory instrumentation significantly reduced the uninstrumented root canal surface from 28% to 9% (Reciproc) and from 34% to 15% (SAF; P < 0.05). The apical and middle thirds exhibited larger uninstrumented root canal surfaces after the first instrumentation that was significantly reduced after oscillatory instrumentation (P < 0.05). CONCLUSIONS: The Reciproc and SAF system were associated with similar morphological parameters after instrumentation of mandibular second molars with C-shaped canals except for a higher canal volume increase in the Reciproc group compared to the SAF. Furthermore, the final use of 90°-oscillatory instrumentation using NiTi hand files significantly decreased the uninstrumented canal walls that remained after Reciproc and SAF instrumentation.

The effect of benzalkonium chloride additions to AH Plus sealer. Antimicrobial, physical and chemical properties.

OBJECTIVES: The aim of this study was to determine the antimicrobial and antibiofilm activities and physicochemical properties of AH Plus sealer mixed with different concentrations of benzalkonium chloride (BC). METHODS: AH Plus was tested alone and mixed with 1%, 2% and 3% of BC. The antimicrobial and antibiofilm activities of the sealers against Enterococcus faecalis were evaluated by the direct contact test (DCT) and by confocal laser scanning microscopy, respectively. Setting time, flow and solubility were assessed according to ANSI/ADA specifications. Microhardness and contact angle tests were also performed. The chemical changes of the sealers were evaluated by X-ray diffraction analysis, and both Fourier transform infrared spectroscopy (FT-IR) and attenuated total reflectance Fourier transform infrared (ATR FT-IR). RESULTS: AH Plus+3% BC was the only sealer to promote total elimination of E. faecalis and the biovolume in this group was significantly lower than in the rest of the sealers (p>0.05). The physical properties of the sealers were according to the ANSI/ADA specifications. The microhardness decreased significantly when BC was added and a significant reduction in contact angle was obtained when incorporating 2% and 3% BC (p<0.05). No phase changes were observed with the modified sealers. CONCLUSIONS: The addition of 2% or higher concentrations BC to AH Plus showed antimicrobial and antibiofilm activities without affecting the properties specified in ANSI/ADA standards. However, additives to the root canal sealer altered other physical and chemical properties that are not commonly found in the literature to evaluate filling materials. CLINICAL SIGNIFICANCE: The present study highlights that the antimicrobial properties of AH Plus can be significantly improved with the addition of BC. Testing beyond what is specified in standards may be indicated.

Micro-CT evaluation of C-shaped mandibular first premolars in a Brazilian subpopulation.

AIM: To describe morphometric aspects of the internal anatomy of C-shaped mandibular premolars from a Brazilian subpopulation using micro-CT analysis. METHODOLOGY: First mandibular premolars with radicular grooves (n = 123) were scanned using a micro-computed tomography system. After cross-section analysis, 83 specimens were identified with a C-shaped canal and selected for micro-CT analysis. Number and location of canals according to Vertucci's classification, distances between anatomic landmarks, occurrence of apical deltas, furcation canals, prevalence of C-shaped cross-sections at five levels as well as 2-dimensional analysis (Area, perimeter, roundness, aspect ratio, major and minor diameters) were performed for the more prevalent anatomical features. Data were compared statistically using Kruskal-Wallis tests (α = 0.05). RESULTS: The more prevalent anatomical types according to Vertucci's classification were Type I (13%), III (8%), V (37%) and VII (2%). Mean distances from the furcation to the cemento-enamel junction were in the range of 5.36-5.65 mm. Apical deltas and furcation canals were present in 36 (43%) and 27 (33%) specimens, respectively. C-shaped cross-sections were more prevalent at the middle (56%) and apical middle levels (81%). Overall, significant differences were found in the 2-dimensional analyses between single canals at the apical third and buccal and lingual canals of Vertucci's V classification (P < 0.05). CONCLUSIONS: In this Brazilian subpopulation, C-shaped canal configuration of the root canal system was found in 67% of extracted first mandibular premolars with radicular grooves. Vertucci's types I and V were the most prevalent anatomical variations. C-shaped cross-sections were more prevalent in the middle third, and the presence of apical deltas was the most common feature in the apical third.

Antimicrobial activity of Chlorhexidine, Peracetic acid and Sodium hypochlorite/etidronate irrigant solutions against Enterococcus faecalis biofilms.

AIM: To evaluate the antimicrobial effect of 2.5% sodium hypochlorite alone (NaOCl) and associated with 9% HEBP (NaOCl/HEBP), 2% peracetic acid (PAA) and 2% chlorhexidine (CHX), on the viability of Enterococcus faecalis biofilms attached to dentine. METHODOLOGY: Biofilms of E. faecalis were grown on the surface of dentine blocks for 5 days and then exposed to the irrigating solutions for 3 min. Distilled water was used as the control. The total biovolume and the percentage of dead cells of the infected dentine were measured by means of confocal microscopy and the live/dead technique. Nonparametric tests were used to determine statistical differences (P < 0.05). RESULTS: NaOCl and the NaOCl/HEBP mixture were associated with a significantly greater percentage of dead cells, followed by PAA (P < 0.05). No significant antimicrobial effect of CHX was observed in comparison with the control group. Total biovolume decreased significantly in NaOCl, NaOCl/HEBP and PAA solutions in comparison with the CHX and control groups. CONCLUSIONS: NaOCl alone or associated with HEBP were the most effective irrigant solutions in dissolving and killing E. faecalis biofilms.

Efficacy of xylene and passive ultrasonic irrigation on remaining root filling material during retreatment of anatomically complex teeth.

AIM: To evaluate the volume of remaining filling material in the mesial root canals of mandibular molars after root canal retreatment with different procedures performed sequentially. METHODOLOGY: The mesial root canals of 12 human first mandibular molars were instrumented using the BioRace system until a size 25, .06 taper instrument. The mesial roots were filled with gutta-percha and AH-Plus using a vertical compaction technique. The specimens were scanned using microcomputed tomography with a voxel size of 16.8 µm before and after the retreatment procedures. To remove the filling material, the root canals were enlarged until the size 40, .04 taper instrument. The second step was to irrigate the root canals with xylene in the attempt to clean the root canals with paper points. In the third step, the passive ultrasonic irrigation technique (PUI) was performed using 2.5% sodium hypochlorite. The initial and residual filling material volume (mm(3) ) after each step was evaluated from the 0.5 to 6.5 mm level. The obtained data were expressed in terms of percentage of residual filling material. Statistical analysis was performed using the Friedman test (P < 0.05). RESULTS: All specimens had residual filling materials after all retreatment procedures. Passive ultrasonic irrigation enhanced the elimination of residual filling material in comparison with the mechanical stage at the 0.5-2.5 mm and 4.5-6.5 mm levels (P < 0.05). No significant difference was found between xylene and PUI methods. CONCLUSIONS: Filling materials were not completely removed by any of the retreatment procedures. The use of xylene and PUI after mechanical instrumentation enhanced removal of materials during endodontic retreatment of anatomically complex teeth.

Biofilm removal by 6% sodium hypochlorite activated by different irrigation techniques.

AIM: To compare the removal of biofilm utilizing four irrigation techniques on a bovine root canal model. METHODOLOGY: Fifty dentine specimens (2 × 2 mm) were infected with biofilm. The samples were then adapted to previously created cavities in the bovine model. The root canals were irrigated twice with 2 mL of 6% sodium hypochlorite for 2 min (4 min total). Following initial irrigation, the different treatment modalities were introduced for 60 s (3 × 20 s intervals). The evaluated techniques were needle irrigation, Endoactivator (Dentsply Tulsa Dental, Tulsa, OK, USA), passive ultrasonic irrigation and laser-activated irrigation (photon-induced photoacoustic streaming). The controls were irrigated with distilled water and conventional needle irrigation. Subsequently, the dentine samples were separated from the model and analysed using a scanning electron microscope (SEM). Fifteen operative fields were scanned per block, and SEM pictures were captured. Two calibrated evaluators examined the images and collected data using a four-degree scale. Nonparametric tests were used to evaluate for statistical significance amongst the groups. RESULTS: The group undergoing laser-activated irrigation using photon-induced photoacoustic streaming exhibited the most favourable results in the removal of biofilm. Passive ultrasonic irrigation scores were significantly lower than both the Endoactivator and needle irrigation scores. Sonic and needle irrigation were not significantly different. The least favourable results were found in the control group. CONCLUSIONS: Laser activation of 6% sodium hypochlorite significantly improved the cleaning of biofilm-infected dentine followed by passive ultrasonic irrigation.

Influence of powder-to-water ratio on radiopacity, setting time, pH, calcium ion release and a micro-CT volumetric solubility of white mineral trioxide aggregate.

AIM: To evaluate the radiopacity, setting time, pH level, calcium ion release and solubility of white mineral trioxide aggregate (MTA; Angelus, Londrina, Pr, Brazil) with different powder-to-water ratios. METHODOLOGY: Three MTA groups were prepared using 4 : 1, 3 : 1 and 2 : 1 powder-to-water ratios. For the radiopacity analysis, the 10 × 1 mm specimens were arranged on occlusal films with a cylinder of dentine and an aluminium stepwedge. The digitized radiographs were evaluated with Digora 1.51 software to determine the radiographic density. The setting time test was performed according to the American Society for Testing and Materials 266/08 standard specifications, but the specimens were made according to International Organization for Standardization 6876:2001. Thirty acrylic teeth with root-end filling material were immersed in ultrapure water for measurement of pH level and calcium ion release (atomic absorption spectrophotometer) at 3, 24, 72 and 168 h. In the solubility test, the root-end fillings of 30 acrylic teeth were scanned twice by a Micro-CT, before and after immersion in ultrapure water for 168 h. Digital data were reconstructed, and the volume (mm(3) ) of the samples was obtained using CTan software (CTan v1.11.10.0, SkyScan). The data were statistically analysed by the anova, Tukey, Kruskal-Wallis and Dunn's tests. RESULTS: The radiopacity was higher (P < 0.05) when the 4 : 1 proportion was utilized. The setting time was longer, and the pH level and calcium ion release were higher (P < 0.05) with a greater volume of water. The group with more water (2 : 1) had significantly (P < 0.05) more material volume loss (6.46%) compared with the other groups. CONCLUSIONS: The ratio of powder/water significantly interfered with the physical and chemical properties of white MTA Angelus.