New methods of track membrane treatment in the preparation of samples for further observation with scanning electron microscopy.

Track membranes are porous systems consisting of a polymer foil with thin channels (i.e. pores) piercing it from surface to surface. The creation of non-cylindrical pores in a track membrane is important for the optimization of membrane characteristics, i.e. the highest productivity at the required selectivity. A new method of cleavage preparation (the irradiation of track membrane samples with accelerated electrons) for the observation of channel shapes directly in the membrane cross-sections is presented. Diagrams showing the tensile and burst strengths as a function of the irradiation dose, and images of surfaces and cleavages of track membrane samples are presented in this work. The changes in the pore sizes and shapes along the channel were clearly seen. These results can be used for the optimization of track membrane production.

Proton tracks and the formation of pores in poly[diethylene glycol bis-(allyl carbonate)].

Modern dosimetry needs efficient detectors for registering light ions, especially light ions having energies of up to 10 MeV/amu. That is why this research pays attention to the development of materials for such a task. In this work, a CR-39 detector, which is the most efficient detector, was used. It was irradiated with low-energy protons. Using sensitive electrolytic etching and electron scanning microscopy, a complete analysis was carried out of the process of the formation of a pore starting from its opening to the final stage of its formation. The process of sequential track breakthroughs was observed. The data obtained on the shape of the pore and the parameters of its formation allow simulation of the process of etching. The etch rates and sensitivity of etching are determined. The influence of energy losses on the geometry of the pore is considered.