A flexible beamline combining XUV attosecond pulses with few-femtosecond UV and near-infrared pulses for time-resolved experiments.

We describe a beamline where few-femtosecond ultraviolet (UV) pulses are generated and synchronized to few-cycle near-infrared (NIR) and extreme ultraviolet (XUV) attosecond pulses. The UV light is obtained via third-harmonic generation in argon or neon gas when focusing a phase-stabilized NIR driving field inside a glass cell that was designed to support high pressures for enhanced conversion efficiency. A recirculation system allows reducing the large gas consumption required for the nonlinear process. Isolated attosecond pulses are generated using the polarization gating technique, and the photon spectrometer employed to characterize the XUV radiation consists of a new design based on the combination of a spherical varied-line-space grating and a cylindrical mirror. This design allows for compactness while providing a long entrance arm for integrating different experimental chambers. The entire interferometer is built under vacuum to prevent both absorption of the XUV light and dispersion of the UV pulses, and it is actively stabilized to ensure an attosecond delay stability during experiments. This table-top source has been realized with the aim of investigating UV-induced electron dynamics in neutral states of bio-relevant molecules, but it also offers the possibility to implement a manifold of novel time-resolved experiments based on photo-ionization/excitation of gaseous and liquid targets by ultraviolet radiation. UV pump-XUV probe measurements in ethyl-iodide showcase the capabilities of the attosecond beamline.

Direct writing of optical microresonators in a lab-on-a-chip for label-free biosensing.

Whispering gallery mode (WGM) resonators are promising optical structures for microfluidic label-free biosensors mainly due to their high sensitivity, but from a practical point of view they present numerous constraints that make their use in real laboratory diagnosis application difficult. Herein we report on a monolithic lab on a chip fabricated by a hybrid femtosecond laser micromachining approach, for label-free biosensing. It consists of a polymer WGM microresonator sensor integrated inside a glass microfluidic chip, presenting a refractive index change sensitivity of 61 nm per RIU. The biosensing capabilities of the device have been demonstrated by exploiting the biotin-streptavidin binding affinity, obtaining a measurable minimum surface density increase of 67 × 103 molecules per µm2.

Integrated waveguides and deterministically positioned nitrogen vacancy centers in diamond created by femtosecond laser writing.

Diamond's nitrogen vacancy (NV) center is an optically active defect with long spin coherence times, showing great potential for both efficient nanoscale magnetometry and quantum information processing schemes. Recently, both the formation of buried 3D optical waveguides and high-quality single NVs in diamond were demonstrated using the versatile femtosecond laser-writing technique. However, until now, combining these technologies has been an outstanding challenge. In this Letter, we fabricate laser-written photonic waveguides in quantum grade diamond which are aligned to within micron resolution to single laser-written NVs, enabling an integrated platform providing deterministically positioned waveguide-coupled NVs. This fabrication technology opens the way toward on-chip optical routing of single photons between NVs and optically integrated spin-based sensing.

Femtosecond laser inscription of Bragg grating waveguides in bulk diamond.

Femtosecond laser writing is applied to form Bragg grating waveguides in the diamond bulk. Type II waveguides are integrated with a single pulse point-by-point periodic laser modification positioned toward the edge of the waveguide core. These photonic devices, operating in the telecommunications band, allow for simultaneous optical waveguiding and narrowband reflection from a fourth-order grating. This fabrication technology opens the way toward advanced 3D photonic networks in diamond for a range of applications.

An optofluidic constriction chip for monitoring metastatic potential and drug response of cancer cells.

Cellular mechanical properties constitute good markers to characterize tumor cells, to study cell population heterogeneity and to highlight the effect of drug treatments. In this work, we describe the fabrication and validation of an integrated optofluidic chip capable of analyzing cellular deformability on the basis of the pressure gradient needed to push a cell through a narrow constriction. We demonstrate the ability of the chip to discriminate between tumorigenic and metastatic breast cancer cells (MCF7 and MDA-MB231) and between human melanoma cells with different metastatic potential (A375P and A375MC2). Moreover, we show that this chip allows highlighting the effect of drugs interfering with microtubule organization (paclitaxel, combretastatin A-4 and nocodazole) on cancer cells, which leads to changes in the pressure-gradient required to push cells through the constriction. Our single-cell microfluidic device for mechanical evaluation is compact and easy to use, allowing for an extensive use in different laboratory environments.

An integrated optofluidic device for single-cell sorting driven by mechanical properties.

We present a novel optofluidic device for real-time sorting on the basis of cell mechanical properties, measured by optical stretching. The whole mechanism, based on optical forces, does not hamper the viability of the tested cells, which can be used for further analysis. The device effectiveness is demonstrated by extracting a sample population enriched with highly metastatic cells from a heterogeneous cell mixture.

Role of ion migrations in ultrafast laser written tellurite glass waveguides.

We report on a strong cross migration of ions in a Tellurite (Te) based glass to form waveguides using a high repetition rate femtosecond laser. The tellurite glass matrix was modified using oxides of P, Na and Zn elements of which Te and Na ions play an important role to form waveguides upon laser irradiation. Tellurium was observed to migrate causing a positive index change zone whereas sodium cross migrates to the tellurium deficient zone forming a relatively low index change region. We have used micro-Raman analysis to scan across the waveguide cross-section to understand the state of the glass network and the relation between ion migration and glass densification for waveguiding. We have found that there is an increase in TeO3 units and reduction of TeO4 units in the Te rich zones enabling densification. This work will help guide the new commercial glass manufacturing industries that aim at producing mid-infrared transparent glasses like tellurite, tellurides and chalcogenides for the production of waveguide based devices.

Observation of surface states with algebraic localization.

We introduce and experimentally demonstrate a class of surface bound states with algebraic decay in a one-dimensional tight-binding lattice. Such states have an energy embedded in the spectrum of scattered states and are structurally stable against perturbations of lattice parameters. Experimental demonstration of surface states with algebraic localization is presented in an array of evanescently coupled optical waveguides with tailored coupling rates.

Optofluidic integrated cell sorter fabricated by femtosecond lasers.

The main trend in optofluidics is currently towards full integration of the devices, thus improving automation, compactness and portability. In this respect femtosecond laser microfabrication is a very powerful technology given its capability of producing both optical waveguides and microfluidic channels. The current challenge in biology is the possibility to perform bioassays at the single cell level to unravel the hidden complexity in nominally homogeneous populations. Here we report on a new device implementing a fully integrated fluorescence-activated cell sorter. This non-invasive device is specifically designed to operate with a limited amount of cells but with a very high selectivity in the sorting process. Characterization of the device with beads and validation with human cells are presented.

Photonic realization of the quantum Rabi model.

We realize a photonic analog simulator of the quantum Rabi model, based on light transport in femtosecond-laser-written waveguide superlattices, which provides an experimentally accessible test bed to explore the physics of light-matter interaction in the deep strong coupling regime. Our optical setting enables us to visualize dynamical regimes not yet accessible in cavity or circuit quantum electrodynamics, such as the bouncing of photon number wave packets in parity chains of Hilbert space.

Background-free broadband CARS spectroscopy from a 1-MHz ytterbium laser.

We introduce a novel configuration for broadband, time-resolved CARS spectroscopy/microscopy in which pump, Stokes and probe pulses are all derived from a single femtosecond Yb:KYW laser. The 1-MHz repetition rate of the system allows very intense CARS signals to be obtained over short acquisition times, while a delayed probe pulse ensures an efficient non-resonant background suppression.

Femtosecond laser written optical waveguide amplifier in phospho-tellurite glass.

We report on the first demonstration of an optical waveguide amplifier in phospho-tellurite glass providing net gain at 1.5 µm. The device was fabricated using a high repetition rate femtosecond laser and exhibited internal gain across 100-nm bandwidth covering the entire C + L telecom bands.

Femtosecond laser fabricated monolithic chip for optical trapping and stretching of single cells.

We report on the fabrication by a femtosecond laser of an optofluidic device for optical trapping and stretching of single cells. Versatility and three-dimensional capabilities of this fabrication technology provide straightforward and extremely accurate alignment between the optical and fluidic components. Optical trapping and stretching of single red blood cells are demonstrated, thus proving the effectiveness of the proposed device as a monolithic optical stretcher. Our results pave the way for a new class of optofluidic devices for single cell analysis, in which, taking advantage of the flexibility of femtosecond laser micromachining, it is possible to further integrate sensing and sorting functions.

Active waveguides written by femtosecond laser irradiation in an erbium-doped phospho-tellurite glass.

We report on fs-laser micromachining of active waveguides in a new erbium-doped phospho-tellurite glass by means of a compact cavity-dumped Yb-based writing system. The spectroscopic properties of the glass were investigated, and the fs-laser written waveguides were characterized in terms of passive as well as active performance. In particular, internal gain was demonstrated in the whole C+L band of optical communications (1530- 1610 nm).

1.5 mum single longitudinal mode waveguide laser fabricated by femtosecond laser writing.

A compact and efficient single longitudinal mode laser based on a femtosecond laser written waveguide is demonstrated. A maximum output power exceeding 50 mW was measured in single longitudinal and transverse mode operation, with 21% slope efficiency. The active waveguide was fabricated on erbium-ytterbium-doped phosphate glass by direct writing with femtosecond laser pulses from a diode-pumped cavity-dumped oscillator.

Fabrication of photonic devices in nanostructured glasses by femtosecond laser pulses.

Focused femtosecond laser pulses have been used to modify the optical properties of glass doped with CdSxSe1-x nanocrystals. Large positive refractive index changes have been observed and exploited for the fabrication of photonic devices. In particular, we report on highly confining optical waveguides and single and multi-layer volume diffraction gratings.

Quantitative Phase Microscopy of microstructures with extended measurement range and correction of chromatic aberrations by multiwavelength digital holography.

Quantitative Phase Microscopy (QPM) by interferometric techniques can require a multiwavelength configuration to remove 2pi ambiguity and improve accuracy. However, severe chromatic aberration can affect the resulting phase-contrast map. By means of classical interference microscope configuration it is quite unpractical to correct such aberration. We propose and demonstrate that by Digital Holography (DH) in a microscope configuration it is possible to clear out the QPM map from the chromatic aberration in a simpler and more effective way with respect to other approaches. The proposed method takes benefit of the unique feature of DH to record in a plane out-of-focus and subsequently reconstruct numerically at the right focal image plane. In fact, the main effect of the chromatic aberration is to shift differently the correct focal image plane at each wavelength and this can be readily compensated by adjusting the corresponding reconstruction distance for each wavelength. A procedure is described in order to determine easily the relative focal shift among different imaging wavelengths by performing a scanning of the numerical reconstruction along the optical axis, to find out the focus and to remove at the same time the chromatic aberration.

Imaging of Bloch oscillations in erbium-doped curved waveguide arrays.

We report a direct observation of Bloch-like dynamics of light in curved waveguide arrays manufactured in Er:Yb-doped phosphate glass by femtosecond laser writing. The green upconversion fluorescence emitted by excited erbium ions is exploited to image the flow of the guided pump light at approximately 980 nm along the array. Direct and clear evidence of periodic light breathing for single-waveguide excitation, closely related to Bloch oscillations, is reported.

Femtosecond laser inscription of optical waveguides in Bismuth ion doped glass.

We report on the fabrication of high quality embedded channel waveguides inside Bi-doped silicate glass using femtosecond waveguide inscription. Waveguides are fabricated using both single and multi-scan fabrication techniques. Refractive index modifications of up to Deltan = 4.3 x 10(-3) are observed, allowing the fabrication of waveguides nearly mode-matched to telecom fibers. When optically pumped at 980 and 810 nm broadband fluorescence emission centered at 1.3 microm with a FWHM of up to 500 nm is detected.

C-band waveguide amplifier produced by femtosecond laser writing.

An optical waveguide amplifier fabricated on erbium-ytterbium-doped phosphate glass by direct femtosecond laser writing is demonstrated. The waveguides are manufactured using 1040-nm radiation from a diode-pumped cavity-dumped Yb:KYW oscillator, operating at a 885 kHz repetition rate, with a 350 fs pulse duration. Peak internal gain of 9.2 dB is obtained at 1535 nm, with a minimum internal gain of 5.2 dB at 1565 nm. Relatively low insertion losses of 1.9 dB enable for the first time an appreciable net gain in the full C-band of optical communications.