Magnetic nanoarrays on flexible substrates.

Abstract: In this work, we used nanosphere lithography to fabricate large area 2-D magnetic nanoparticle (MNP) arrays on a flexible polyimide substrate (Kapton). Samples were fabricated by assembling polystyrene (PS) spheres on thin films of Co capped with Au. Etched PS spheres were used to mask Co-Au particle arrays. The MNP arrays were subjected to superconducting quantum interference device measurements; flat samples (10 nm Co coated with 10 nm Au) exhibited an M s of 117.3 emu g-1, which was lower than the reported literature value for bulk Co (162.7 emu g-1). When compared to the flat film, coercivity, H c, increased in a linear fashion with respect to particle size. These preliminary results reveal that future investigations of the magnetic properties on flexible substrates should account for residual Co remaining in the polymeric material, the unique MNP shape, the effect of order (or lack or order) of the 2D array, and positioning with respect to the direction of the magnetic field. Supplementary Information: The online version contains supplementary material available at 10.1557/s43580-021-00193-z.

Quantum-Well Bound States in Graphene Heterostructure Interfaces.

We present experimental evidence of electronic and optical interlayer resonances in graphene van der Waals heterostructure interfaces. Using the spectroscopic mode of a low-energy electron microscope (LEEM), we characterized these interlayer resonant states up to 10 eV above the vacuum level. Compared with nontwisted, AB-stacked bilayer graphene (AB BLG), an ≈0.2 Å increase was found in the interlayer spacing of 30° twisted bilayer graphene (30°-tBLG). In addition, we used Raman spectroscopy to probe the inelastic light-matter interactions. A unique type of Fano resonance was found around the D and G modes of the graphene lattice vibrations. This anomalous, robust Fano resonance is a direct result of quantum confinement and the interplay between discrete phonon states and the excitonic continuum.

Single-Electron Tunneling PbS/InP Heterostructure Nanoplatelets for Synaptic Operations.

Power consumption, thermal management, and wiring challenge of the binary serial architecture drive the search for alternative paradigms to computing. Of special interest is neuromorphic computing, in which materials and device structures are designed to mimic neuronal functionalities with energy-efficient non-linear responses and both short- and long-term plasticities. In this work, we explore and report on the enabling potential of single-electron tunneling (SET) in PbS nanoplatelets epitaxially grown in the liquid phase on InP, which present these key features. By extrapolating the experimental data in the SET regime, we predict and model synaptic operations. The low-energy (

Biomimetic Colorants and Coatings Designed with Cephalopod-Inspired Nanocomposites.

Brilliant and dynamic colors in nature have stimulated the design of dyes and pigments with broad applications ranging from electronic displays to apparel. Inspired by the nanostructured pigment granules present in cephalopod chromatophore organs, we describe the design and fabrication of biohybrid colorants containing the cephalopod-specific pigment, xanthommatin (Xa), encased within silica-based nanostructures. We employed a biomimetic approach to encapsulate Xa with amine-terminated polyamidoamine (PAMAM) dendrimer templates, which helped stabilize the pigment during encapsulation. Depending on the concentration of Xa used in the reaction, the resultant biohybrid nanomaterials generated a range of neutral colors of differing hues. When applied as coatings, these colorants can be triggered to change color from yellow/gold to red in the presence of a chemical reducing agent, as we leverage the natural redox-dependent color change of Xa. Altogether, these capabilities demonstrated the ability to process biochromes like Xa as nanomaterials that can be applied as coatings with a tunable and dynamic range.

Differential phase-shift-keying demodulation by coherent perfect absorption in silicon photonics.

We demonstrate a novel differential phase-shift-keying (DPSK) demodulator based on coherent perfect absorption (CPA). Our DPSK demodulator chip device, which incorporates a silicon ring resonator, two bus waveguide inputs, and monolithically integrated detectors, operates passively at a bit rate of 10 Gbps at telecommunication wavelengths, and fits within a mm-scale footprint. Critical coupling is used to achieve efficient CPA by tuning the gap between the ring and bus waveguides. The device has a vertical eye opening of 12.47 mV and a quality factor exceeding 3×104. The fundamental principle behind this photonic circuit can be extended to other formats of integrated demodulators.

Two-color field enhancement at an STM junction for spatiotemporally resolved photoemission.

We report measurements and numerical simulations of ultrafast laser-excited carrier flow across a scanning tunneling microscope (STM) junction. The current from a nanoscopic tungsten tip across a ∼1 nm vacuum gap to a silver surface is driven by a two-color excitation scheme that uses an optical delay-modulation technique to extract the two-color signal from background contributions. The role of optical field enhancements in driving the current is investigated using density functional theory and full three-dimensional finite-difference time-domain computations. We find that simulated field-enhanced two-photon photoemission (2PPE) currents are in excellent agreement with the observed exponential decay of the two-color photoexcited current with increasing tip-surface separation, as well as its optical-delay dependence. The results suggest an approach to 2PPE with simultaneous subpicosecond temporal and nanometer spatial resolution.

Color Richness in Cephalopod Chromatophores Originating from High Refractive Index Biomolecules.

Cephalopods are arguably one of the most photonically sophisticated marine animals, as they can rapidly adapt their dermal color and texture to their surroundings using both structural and pigmentary coloration. Their chromatophore organs facilitate this process, but the molecular mechanism potentiating color change is not well understood. We hypothesize that the pigments, which are localized within nanostructured granules in the chromatophore, enhance the scattering of light within the dermal tissue. To test this, we extracted the phenoxazone-based pigments from the chromatophore and extrapolated their complex refractive index (RI) from experimentally determined real and approximated imaginary portions of the RI. Mie theory was used to calculate the absorbance and scattering cross sections (cm2/particle) across a broad diameter range at λ = 589 nm. We observed that the pigments were more likely to scatter attenuated light than absorb it and that these characteristics may contribute to the color richness of cephalopods.

Opportunities and Limitations for Nanophotonic Structures To Exceed the Shockley-Queisser Limit.

Nanophotonic engineering holds great promise for photovoltaics, with several recently proposed approaches that have enabled efficiencies close to the Shockley-Queisser limit. Here, we theoretically demonstrate that suitably designed nanophotonic structures may be able to surpass the 1 sun Shockley-Queisser limit by utilizing tailored directivity of the scattering response of nanoparticles. We show that large absorption cross sections do not play a significant role in the efficiency enhancement, and on the contrary, directivity enhancement constitutes the nanoscale equivalent to concentration in macroscopic photovoltaic systems. Based on this principle, we discuss fundamental limits to the efficiency based on directivity bounds and a number of approaches to get close to these limits. We also highlight that, in practice, achieving efficiencies above the Shockley-Queisser limit is strongly hindered by whether high short-circuit currents can be maintained. Finally, we discuss how our results are affected by the presence of significant nonradiative recombination, in which case both directivity and photon escape probability should be increased to achieve voltage enhancement.

Experimental demonstration of coherent perfect absorption in a silicon photonic racetrack resonator.

We present the first experimental demonstration of coherent perfect absorption (CPA) in an integrated device using a silicon racetrack resonator at telecommunication wavelengths. Absorption in the racetrack is achieved by Si+-ion-implantation, allowing for phase controllable amplitude modulation at the resonant wavelength. The device is measured to have an extinction of 24.5 dB and a quality-factor exceeding 3000. Our results will enable integrated CPA devices for data modulation and detection.

Rigorous theoretical analysis of a surface-plasmon nanolaser with monolayer MoS2 gain medium.

Lasers based on monolayer (ML) transition-metal dichalcogenide semiconductor crystals have the potential for low threshold operation and a small device footprint; however, nanophotonic engineering is required to maximize the interaction between the optical fields and the three-atom-thick gain medium. Here, we develop a theoretical model to design a direct bandgap optically pumped nanophotonic integrated laser. Our device utilizes a gap-surface-plasmon optical mode to achieve subwavelength optical confinement and consists of a high-index GaP nanowire atop an ML MoS2 film on an Ag substrate. The optical field and material medium are analyzed using a three dimensional finite-difference time-domain method and a first-principles calculation based on the density functional theory, respectively. The nanolaser is designed to have a threshold of ∼0.6 µW under quasi-continuous wave operation on an excitonic transition at room temperature.

Direct Measurement of the Tunable Electronic Structure of Bilayer MoS2 by Interlayer Twist.

Using angle-resolved photoemission on micrometer-scale sample areas, we directly measure the interlayer twist angle-dependent electronic band structure of bilayer molybdenum-disulfide (MoS2). Our measurements, performed on arbitrarily stacked bilayer MoS2 flakes prepared by chemical vapor deposition, provide direct evidence for a downshift of the quasiparticle energy of the valence band at the Brillouin zone center (Γ̅ point) with the interlayer twist angle, up to a maximum of 120 meV at a twist angle of ∼40°. Our direct measurements of the valence band structure enable the extraction of the hole effective mass as a function of the interlayer twist angle. While our results at Γ̅ agree with recently published photoluminescence data, our measurements of the quasiparticle spectrum over the full 2D Brillouin zone reveal a richer and more complicated change in the electronic structure than previously theoretically predicted. The electronic structure measurements reported here, including the evolution of the effective mass with twist-angle, provide new insight into the physics of twisted transition-metal dichalcogenide bilayers and serve as a guide for the practical design of MoS2 optoelectronic and spin-/valley-tronic devices.

Controlling surface reactions with nanopatterned surface elastic strain.

The application of elastic lattice strain is a promising approach for tuning material properties, but the attainment of a systematic approach for introducing a high level of strain in materials so as to study its effects has been a major challenge. Here we create an array of intense locally varying strain fields on a TiO2 (110) surface by introducing highly pressurized argon nanoclusters at 6-20 monolayers under the surface. By combining scanning tunneling microscopy imaging and the continuum mechanics model, we show that strain causes the surface bridge-bonded oxygen vacancies (BBOv), which are typically present on this surface, to be absent from the strained area and generates defect-free regions. In addition, we find that the adsorption energy of hydrogen binding to oxygen (BBO) is significantly altered by local lattice strain. In particular, the adsorption energy of hydrogen on BBO rows is reduced by ∼ 35 meV when the local crystal lattice is compressed by ∼ 1.3%. Our results provide direct evidence of the influence of strain on atomic-scale surface chemical properties, and such effects may help guide future research in catalysis materials design.

Si⁺-implanted Si-wire waveguide photodetectors for the mid-infrared.

CMOS-compatible Si⁺-implanted Si-waveguide p-i-n photodetectors operating at room temperature and at mid-infrared wavelengths from 2.2 to 2.3 µm are demonstrated. Responsivities of 9.9 ± 2.0 mA/W are measured at a 5 V reverse bias with an estimated internal quantum efficiency of 2.7 - 4.5%. The dark current is found to vary from a few microamps down to less than a nanoamp after a post-implantation annealing of 350°C. The measured photocurrent dependence on input power shows a linear correspondence over more than three decades, and the frequency response of a 250 µm-length p-i-n device is measured to be ~1.7 GHz for a wavelength of λ = 2.2 µm, thus potentially opening up new communication bands for photonic integrated circuits.

Nanoscale strain engineering on the surface of a bulk TiO2 crystal.

Arrays of highly strained 5-25 nm-wide regions have been prepared on rutile TiO2(110) surface through a low energy Ar ion bombardment technique. Using scanning tunneling microscopy (STM) and an innovative STM tip-triggered nanoexplosion approach we show experimentally that the protrusions arise from subsurface Ar-filled pockets. Continuum mechanics modeling gives good estimates of the corresponding elastic deformation. Surface strain values of up to 4% have been deduced.

Engineering metal-nanoantennae/dye complexes for maximum fluorescence enhancement.

We theoretically investigate the fluorescence enhancement of a molecule placed in a variable (4 - 20 nm) gap of a plasmonic dimer, with different dye molecules as well as different nanoparticle geometries, using a fully vectorial three-dimensional finite-difference time-domain (3D FDTD) method. This work extends previous studies on molecular fluorescence in the vicinity of metal interfaces and single nanoparticles and shows how the radiative emission of a molecule can be further enhanced by engineering the geometry of a plasmonic structure. Through the use of rigorous 3D FDTD calculations, in conjunction with analytic guidance based on temporal coupled-mode (TCM) theory, we develop a design procedure for antennae assemblies that is useful both for general understanding of molecule-metal structure interaction and experimental efforts in plasmon-enhanced molecular spectroscopy.

Helium-ion-induced radiation damage in LiNbO3 thin-film electro-optic modulators.

Helium-ion-induced radiation damage in a LiNbO3-thin-film (10 µm-thick) modulator is experimentally investigated. The results demonstrate a degradation of the device performance in the presence of He(+) irradiation at doses of ≥ 10(16) cm(-2). The experiments also show that the presence of the He(+) stopping region, which determines the degree of overlap between the ion-damaged region and the guided optical mode, plays a major role in determining the degree of degradation in modulation performance. Our measurements showed that the higher overlap can lead to an additional ~5.5 dB propagation loss. The irradiation-induced change of crystal-film anisotropy(n(o)-n(e))of ~36% was observed for the highest dose used in the experiments. The relevant device extinction ratio, V(π)L, and device insertion loss, as well the damage mechanisms of each of these parameters are also reported and discussed.

A 60 Gb/s MDM-WDM Si photonic link with < 0.7 dB power penalty per channel.

Mode-division-multiplexing (MDM) and wavelength-division-multiplexing (WDM) are employed simultaneously in a multimode silicon waveguide to realize on-chip MDM and MDM-WDM transmission. Asymmetric Y-junction MDM multiplexers and demultiplexers are utilized for low coherently suppressed demultiplexed crosstalk at the receiver. We demonstrate aggregate bandwidths of 20 Gb/s and 60 Gb/s for MDM and MDM-WDM on-chip links, respectively, with measured 10(-9) BER power penalties between 0.1 dB and 0.7 dB per channel.

Metal-semiconductor-metal ion-implanted Si waveguide photodetectors for C-band operation.

Metal-semiconductor-metal Si waveguide photodetectors are demonstrated with responsivities of greater than 0.5 A/W at a wavelength of 1550 nm for a device length of 1mm. Sub-bandgap absorption in the Si waveguide is achieved by creating divacancy lattice defects via Si(+) ion implantation. The modal absorption coefficient of the ion-implanted Si waveguide is measured to be ≈ 185 dB/cm, resulting in a detector responsivity of ≈ 0.51 A/W at a 50 V bias. The frequency response of a typical 1mm-length detector is measured to be 2.6 GHz, with simulations showing that a frequency response of 9.8 GHz is achievable with an optimized contact configuration and bias voltage of 15 V. Due to the ease with which these devices can be fabricated, and their potential for high performance, these detectors are suitable for various applications in Si-based photonic integrated circuits.

Pulse compression in adiabatically tapered silicon photonic wires.

We present a comprehensive analysis of pulse compression in adiabatically tapered silicon photonic wire waveguides (Si-PhWWGs), both at telecom (λ ∼ 1.55 µm) and mid-IR (λ ≳ 2.1 µm) wavelengths. Our theoretical and computational study is based on a rigorous model that describes the coupled dynamics of the optical field and photogenerated free carriers, as well as the influence of the physical and geometrical parameters of the Si-PhWWGs on these dynamics. We consider both the soliton and non-soliton pulse propagation regimes, rendering the conclusions of this study relevant to a broad range of experimental settings and practical applications. In particular, we show that by engineering the linear and nonlinear optical properties of Si-PhWWGs through adiabatically varying their width, one can achieve more than 10× pulse compression in millimeter-long waveguides. The inter-dependence between the pulse characteristics and compression efficiency is also discussed.