Adsorption Behavior of Divalent Metal Ions onto Surface-functionalized Mesoporous Silicate MCM-41 Having Schiff Base Structure.

Surface functionalized mesoporous silicates, MCM-41s, having 3-(2-pyridylmethylideneimino)propyl group (PI-MCM-41) or 3-(2-quinolylmethylideneimino)propyl group (QI-MCM-41) were prepared via Schiff base reaction, and the adsorption behavior of metal ions onto the modified MCM-41s was investigated. The function groups on the modified MCM-41 surface were confirmed by Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and elemental analysis. The metal ions examined, Co2+, Ni2+, Cu2+, Zn2+, Cd2+, and Pb2+, were quantitatively adsorbed on the PI-MCM-41 and QI-MCM-41, except for Mn2+. In the complexation with these metal ions, it was suggested that imine-N and heterocyclic-N atoms act as donor atoms. In addition, it was considered that the hydrophobicity derived from the organo-functional groups modified on MCM-41 contributed to improving the adsorption ability.

Use of 8-sulfonamidoquinoline derivatives as chelate extraction reagents in ionic liquid extraction system.

Possible use of 8-sulfonamidoquinoline derivatives as chelate extraction reagents for solvent extraction of several divalent metal cations using an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF(6)]) as extraction phase was investigated as fundamental approach to develop novel extraction reagents for ionic liquid extraction system. The studied reagents were able to be used as extractants for the metal cations in the [bmim][PF(6)] extraction system. Furthermore, their extractability in the [bmim][PF(6)] system was superior to that in chloroform system. Most of the extracted species were (hydrated) neutral complexes, whereas, in use of the derivative having trifluoromethyl group, Cd(2+) was extracted as anionic complex accompanied with anion-exchange process.

Adsorption of divalent transition metal ions with a chelating agent on octadecyl silica gel.

This investigation looked at the extraction ability of divalent transition metal ions onto an octadecyl silica gel (C18g) with a 4,4-trifluoro-1-(2-thienyl)-1,3-butadione (TTA) chelating agent. A method of retaining TTA onto C18g (TTA-C18g) was developed in order to adsorb the metal ions. The difference in the half-adsorption and half-extraction pH values between transition metals Ni2+-Co2+ was found to be 0.7 in this system. This is better than previously published results of 0.3 for the conventional extraction method using TTA in nitrobenzene. More than 96% of the metal ions in aqueous solution could be adsorbed onto TTA-C18g. Our system, which has no organic phase, can achieve a better removal or separation of transition metal ions than the conventional solvent-extraction methods using TTA in toluene or nitrobenzene.

"Substituent on benzenesulfonyl group" effect in use of 8-benzenesulfonamidoquinoline derivatives as chelate extractant.

"Substituent on benzenesulfonyl group" effect of 8-benzenesulfonamidoquinoline [N-(8-quinolyl)benzenesulfonamide, Hbsq] as bidentate chelate extractant for divalent metal cations was investigated with using Hbsq and its eight derivatives. Introduction of electron-withdrawing substituent on the benzenesulfonyl group in Hbsq enhanced the extractability that originated from its inductive effect. Furthermore, a bulky substituent on an ortho-position of the benzenesulfonyl group resulted in no steric effect in extraction, whereas the existence of two substituents on each ortho-position caused lower extraction performance due to steric hindrance.

Ion-pair extraction behavior of divalent metal cations using neutral di-Schiff base ligands derived from 1,2-cyclohexanediamine and o-phenylenediamine.

Di-Schiff base ligand, N,N'-bis(2-pyridylmethylidene)-trans-1,2-diiminocyclohexane (trans-BPIC), having sufficient hydrophobicity acts as neutral bidentate ligand in ion-pair extraction of divalent metal cations into nitrobenzene with picrate anion. In present study, the effect of steric restriction by chemical structure around imine-N donor atoms in trans-BPIC analogs on their complexation with divalent metal cations in ion-pair extraction was investigated by using N,N'-bis(2-pyridylmethylidene)-cis-1,2-diiminocyclohexane (cis-BPIC) and N,N'-bis(2-pyridylmethylidene)-o-diiminobenezene (BPIB). The former was used to observe the effect by geometrical restriction and the latter was by conjugate restriction. In BPIB-NaPic system, the higher extractability was obtained than those in cis- and trans-BPIC systems, and this result seems to be led by the increase of steric distortion originated from conformational restriction. Namely, it is considered that the extractability can be controlled by steric restriction on the complexation.

Structural control of Schiff base ligands for selective extraction of copper(II).

Structural control of Schiff base ligands for selective extraction of copper(II) was investigated by changing pendant arms and the distance between two imine-N donor atoms in ligands. Di-Schiff base ligands, N,N'-bis(2-quinolylmethylidene)-1,2-diiminoethane (BQIE), N,N'-bis(2-pyridylmethylidene)-1,3-diimino-2,2-dimethylpropane (BPMP) and N,N'-bis(2-quinolylmethylidene)-1,3-diimino-2,2-dimethylpropane (BQMP), were used as complexation reagents for ion-pair extraction of divalent transition metal cations into nitrobenzene with picrate anion. The pendant arms affected the lipophilicity of ligand to nitrobenzene, due to their polarity. The distance between two imine-N atoms, on the contrary, was a factor of controlling the extraction selectivity. BQMP has both 2-quinolyl pendant arms and trimethylene backbone structure; use of BQMP as a complexation reagent led to the selective extraction of Cu2+ in the system.